Chemisorption of 1,1-dichloroethene on the Si(1 1 1)-7 × 7 surface

Chemisorption of 1,1-dichloroethene (Cl₂CCH₂) to a Si(1 1 1)-7 × 7 surface was studied by means of X-ray photoelectron spectroscopy using synchrotron radiation, recording chlorine 2p and carbon 1s spectra. For carbon 1s, spectral assignment of the chemisorbed species is based on quantum chemical calculations of chemical shifts in model compounds.The results confirm the identity of covalently bonded 1-chlorovinyl (-CClCH₂) and vinylidene (CCH₂) adspecies. Upon chemisorption at room temperature it was found that about one-third of the molecules break one C-Cl bond while about two-thirds of the adsorbates break two C-Cl bonds. We do not, however, find evidence for isomerization of CCH₂ to di-bonded vinylene (-CHCH-).     

Excited-state inter- and intramolecular proton transfer in methyl 3-hydroxy-2-quinoxalinate: effects of solvent and acid or base concentrations

Absorption, fluorescence excitation and fluorescence spectroscopy, combined with time-dependent spectroscopy and semi-empirical (AM1) and density functional theory using Gaussian 98 program calculations have been used to study the effects of solvent and acid or base concentration on the spectral characteristics of methyl 3-hydroxy-2-quinoxalinate (M3HQ). M3HQ is present as enol in less polar solvents and as keto in polar media. In non-polar solvents, large Stokes shifted fluorescence band is assigned to the phototautomer, formed by the excited-state intramolecular proton transfer, whereas fluorescence is only observed from keto in the polar solvents. In aqueous and polar solvents the monocation (MC5/MC6) is formed by protonating the carbonyl oxygen atom in the ground (S₀) and the first excited singlet states (S₁). Dication is formed by protonating one of N- atom of MC5/MC6. Monoanion is formed by deprotonating the phenolic proton of enol in the basic solution. pK_a values for different prototropic equilibriums were determined in S₀ and S₁ states and discussed.     

A selective [4 + 2]-like cycloaddition of α, β-unsaturated ketone on Si(1 1 1)-7 × 7

The interaction of ethyl vinyl ketone (EVK) with Si(1 1 1)-7 × 7 has been investigated using high-resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations. The disappearance of both stretching vibrations of CH₂ (3099 cm⁻¹) and CO (1684 cm⁻¹) coupled with the appearance of new CC stretching mode (1660 cm⁻¹) in the HREELS spectra of chemisorbed EVK clearly demonstrates the direct involvement of conjugated CC and CO bonds to form a SiC¹H₂C²HC³(C⁴H₂C⁵H₃)OSi surface species via [4 + 2]-like cycloaddition in a highly selective manner. In addition, XPS studies show that the C1s binding energies of C¹/C² and C³ upon chemisorption display chemical downshifts of 0.8 eV and 2.2 eV, respectively, further confirming the proposed [4 + 2]-like cycloaddition reaction for the EVK/Si(1 1 1)-7 × 7 system. DFT theoretical calculations suggest that the proposed [4 + 2]-like cycloadduct is thermodynamically most favorable.     

S180 cell growth on low ion energy plasma treated TiO2 thin films

X-ray photoelectron spectroscopy (XPS) was used to characterise the effects of low energy (<2 eV) argon ion plasma surface modification of TiO₂ thin films deposited by radio frequency (RF) magnetron sputter system. The low energy argon ion plasma surface modification of TiO₂ in a two-stage hybrid system had increased the proportion of surface states of TiO₂ as Ti³⁺. The proportion of carbon atoms as alcohol/ether (COX) was decreased with increase the RF power and carbon atoms as carbonyl (CO) functionality had increased for low RF power treatment. The proportion of C(O)OX functionality at the surface was decreased at low power and further increase in power has showed an increase in its relive proportion at the surface. The growth of S180 cells was observed and it seems that cells are uniformly spreads on tissue culture polystyrene surface and untreated TiO₂ surfaces whereas small-localised cell free area can be seen on plasma treated TiO₂ surfaces which may be due to decrease in C(O)OX, increase in CO and active sites at the surface. A relatively large variation in the surface functionalities with no change in the surface roughness was achieved by different RF plasma treatments of TiO₂ surface whereas no significant change in S180 cell growth with different plasma treatments. This may be because cell growth on TiO₂ was mainly influenced by nano-surface characteristics of oxide films rather than surface chemistry.     

Selective surface chemistry of allyl alcohol and allyl aldehyde on Si(1 0 0)2×1: Competition of [2 + 2] CC cycloaddition with O-H dissociation and with [2 + 2] CO cycloaddition in bifunctional molecules

Competition between the CC functional group with the OH group in allyl alcohol and with the CO group in allyl aldehyde in the adsorption and thermal chemistry on Si(1 0 0)2×1 has been studied by X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption (TPD), as well as density-functional theory (DFT) calculations. The similarities found in the C 1s and O 1s spectra for both molecules indicate that the O-H dissociation product for allyl alcohol and [2 + 2] CO cycloaddition product for allyl aldehyde are preferred over the corresponding [2 + 2] CC cycloaddition products. Temperature-dependent XPS and TPD studies further show that thermal evolution of these molecules gives rise to the formation of ethylene, acetylene, and propene on Si(1 0 0)2×1, with additional CO evolution only from allyl alcohol. The formation of these desorption products also supports that the [2 + 2] CC cycloaddition reaction does not occur. In addition, the formation of SiC at 1090 K is observed for both allyl alcohol and allyl aldehyde. We propose plausible surface-mediated reaction pathways for the formation of these thermal evolution products. The present work illustrates the crucial role of the Si(1 0 0)2×1 surface in selective reactions of the Si dimers with the O−H group in allyl alcohol and with the CO group in allyl aldehyde over the CC functional group common to both molecules.     

Modification of wetting properties of CR39 by plasma source ion implantation

Plasma source ion implantation (PSII), a hybrid implantation technique between ion beams and immersion plasmas has been used to modify CR39 surfaces for improved wettability providing both advancing (θ_a) and receding (θ_r) contact angles below 5°. The modifications brought to the polymer surface structure have been characterized by X-ray photoelectron spectroscopy (XPS) and its combination with chemical derivatization (CD-XPS). Oxygen desorption has been observed in spite of the very hydrophilic surfaces. C_1s XPS peak has been displaced toward greater energies, while the opposite has been found for O_1s, both involving new components and strong modifications after ion implantation treatment. Strong evidences about the formation of new chemical functions, like OOH, COOH and CC, have been found and have provided an explanation for the increased wettability.     

Effects of NH3, O2, and N2 co-implantation on Cu out-diffusion and antimicrobial properties of copper plasma-implanted polyethylene

Metal antibacterial reagents are effective in the enhancement of the antimicrobial properties of medical polymers. However, incorporation of metal antibacterial reagents into polymers using conventional methods usually results in unstable antimicrobial effects. Our previous research demonstrates that plasma immersion ion implantation (PIII) can be used to effectively incorporate metal antibacterial reagents such as Cu into polyethylene (PE) in the near surface region up to several hundred nanometers without causing noticeable damage to the polymer matrix. In this work, various gases including NH₃, O₂, and N₂ were plasma-implanted in concert with Cu plasma immersion ion implantation to study the effects of these gas species on the release rate of Cu from the substrate. Our experimental results reveal that the copper depth profiles are not affected significantly by NH₃, O₂, or N₂ co-implantation and these gas elements have similar depth profiles as Cu. Chemical analyses demonstrate that polar functional CO, CO, CN, CN, and CN bonds formed in the substrate play an important role in regulating Cu out-diffusion. Among the three gas species, N₂ shows the best effects in regulating Cu out-diffusion and produces the best long term antibacterial properties. The Cu retention and out-diffusion mechanism in the ion-implanted polyethylene is described.     

Anharmonic force field and equilibrium structure of nitric acid

The quadratic, cubic and semi-diagonal quartic force field of nitric acid has been calculated at the CCSD(T) level of theory employing a basis set of triple-ζ quality. A semi-experimental equilibrium structure has been derived from experimental ground state rotational constants and rovibrational interaction parameters calculated from the ab initio force field. It is found that the A and B semi-experimental equilibrium rotational constants of the ¹⁸O isotopologues (for which the rotation of principal axes is large) cannot be accurately reproduced. This problem is discussed and a remedy is proposed. Finally, the semi-experimental structure is in agreement with the ab initio structure calculated at the CCSD(T) level of theory using a basis set of at least quadruple-ζ quality and a core correlation correction, except for the long NO single bond for which the CCSD(T) value is too short due to inadequate treatment of electron correlation. The empirical structures are also determined and their accuracy is discussed. The best equilibrium structure is: r_e(NO_syn) = 1.209(1) Å, r_e(NO_anti) = 1.194(1) Å, r_e(NO) = 1.397(1) Å, r_e(OH) = 0.968(1) Å, ∠(ONO_syn) = 115.8(1)°, ∠(ONO_anti) = 114.2(1)° and ∠(NOH) = 102.2(1)°.     

First-principle study of extrinsic defects in CuScO2 and CuYO2

Using first-principles methods, we studied the extrinsic defects doping in transparent conducting oxides CuMO₂ (MSc, Y). We chose Be, Mg, Ca, Si, Ge, Sn as extrinsic defects to substitute for M and Cu atoms. By systematically calculating the impurity formation energy and transition energy level, we find that BeCu is the most prominent extrinsic donor and CaM is the prominent extrinsic acceptor. In addition, we find that Mg atom substituting for Sc is the most prominent extrinsic acceptor in CuScO₂. Our calculation results are expected to be a guide for preparing n-type and p-type materials through extrinsic doping in CuMO₂ (MSc,Y).     

XPS analysis of down stream plasma treated wool: Influence of the nature of the gas on the surface modification of wool

A microwave plasma treatment in a down stream configuration was used to modify the natural hydrophobocity of untreated wool fibers. This property is a consequence of the presence of a Fatty acid monolayer (F-layer) on the outermost part of the fiber surface. The wool fibers treated with plasma were analyzed by means of X-ray photoelectron spectroscopy (XPS) without previous exposure to the air. Experiments have been carried out with air, water vapor, oxygen and nitrogen as plasma gas. The “in situ” analysis of the treated samples has permitted to differentiate between the plasma effects and those other linked to the exposure of the fibers to the air after their treatment. The results have evidenced the effects induced by the different active species generated by plasma from the different components of the air. In general, the intensity of CC peaks decreases and that of the CO, CO and OCO increases when using a gas containing oxygen species. Simultaneously, the intensity of the SS groups decreases and that of the sulphonate (SO₃⁻) increases. Other changes are also detected in the intensity of the N 1s level. The extent and characteristics of the oxidation and functionalisation of the hydrocarbon chains of the F-layer depend on the nature of gas. Thus, whereas treatments with plasmas of air and water vapor strongly affect the hydrocarbon chains of the F-layer, oxygen is less effective in the oxidation process. It has been also noted that the active species formed in the nitrogen plasma do not induce any significant change in the surface composition of the wool fibers.     

Rotational spectrum of cyclohexyl sarin

The rotational spectrum of cyclohexyl sarin (also known as GF) has been measured in a jet-cooled expansion using Fourier transform microwave spectroscopy. Two spectra have been observed, each having splittings associated with the internal rotation of the CH₃P group. The observed V₃ barriers are similar in magnitude to those reported for other organophosphonate nerve agents. The two conformational structures of GF have been identified from comparisons of the observed rotational constants and dipole moment magnitudes with ab initio predictions at the MP2/6311G (d,p) level. These two structures are distinguished by the placement of the fluorophosphonate group at the equatorial and axial positions of the cyclohexane ring. The data also suggest that both conformers prefer a positioning of the FP group with the PO oxygen in an eclipsed orientation relative to the C₁ hydrogen on the ring.     

Reaction of acetonitrile with the silicon(0 0 1) surface: A combined XPS and FTIR study

The adsorption of acetonitrile on the Si(0 0 1) surface has been investigated using X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR). XPS and FTIR spectra indicate that adsorbed acetonitrile forms two correlated binding configurations, a CN species with a strong FTIR absorption at 1540 cm⁻¹ and a CCN (ketenimine) species that has a very strong FTIR absorption at 1952 cm⁻¹. The CCN FTIR peak at 1952 cm⁻¹ shows a striking polarization dependence, with the infrared transition dipole almost entirely in the plane of the sample and parallel to the SiSi dimer axis. Our data suggests that the primary CCN structure results from cleavage of two C-H bonds, forming a structure in which the N and terminal C atom are both linked to the surface. Temperature-dependent experiments help to elucidate the complicated reaction mechanism for acetonitrile adsorbing onto the Si(0 0 1) surface. Dosing at higher temperature increases the amount of CCN relative to CN species while heating leads to direct transformation of the CN to the CCN species. Our results indicate that previous studies, which considered only products formed by cleavage of a single C-H bond, have misidentified the primary ketenimine product. A reinterpretation of the earlier results, combined with data presented here, sheds new light onto the products and mechanism of interaction of acetonitrile with Si(0 0 1).     

Synthesis and structure of nitrogenated tetrahedral amorphous carbon films prepared by nitrogen ion bombardment

The tetrahedral amorphous carbon (ta-C) films with more than 80% sp³ fraction firstly were deposited by filtered cathode vacuum arc (FCVA) technique. Then the energetic nitrogen (N) ion was used to bombard the ta-C films to fabricate nitrogenated tetrahedral amorphous carbon (ta-C:N) films. The composition and structure of the films were analyzed by visible Raman spectrum and X-ray photoelectron spectroscopy (XPS). The result shows that the bombardment of energetic nitrogen ions can induce the formation of CN bonds, the conversion of C-C bonds to CC bonds, and the increase of size of sp² cluster. The CN bonds are made of CN bonds and C-N bonds. The content of CN bonds increases with the increment of N ion bombardment energy, but the content of C-N bonds is inversely proportional to the increment of nitrogen ion energy. In addition, C≡N bonds are not existed in the films. By the investigation of AFM (atom force microscopy), the RMS (root mean square) of surface roughness of the ta-C film is about 0.21 nm. When the bombarding energy of N ion is 1000 eV, the RMS of surface roughness of the ta-C:N film decreases from 0.21 to 0.18 nm. But along with the increment of the N ion energy ranging from 1400 to 2200 eV again, the RMS of surface roughness of the ta-C:N film increases from 0.19 to 0.33 nm.     

Site-blocking effects of preadsorbed H on Pt(1 1 1) probed by 1,3-butadiene adsorption and reaction

The influence of hydrogen coadsorption on hydrocarbon chemistry on transition metal surfaces is a key aspect to an improved understanding of catalytic selective hydrogenation. We have investigated the effects of H preadsorption on adsorption and reaction of 1,3-butadiene (H₂CCHCHCH₂, C₄H₆) on Pt(1 1 1) surfaces by using temperature-programmed desorption (TPD) and Auger electron spectroscopy (AES). Preadsorbed hydrogen adatoms decrease the amount of 1,3-butadiene chemisorbed on the surface and chemisorption is completely blocked by the hydrogen monolayer (saturation) coverage (θ_H = 0.92 ML). No hydrogenation products of reactions between coadsorbed H adatoms and 1,3-butadiene were observed to desorb in TPD experiments over the range of θ_H investigated (θ_H = 0.6-0.9 ML). This is in strong contrast to the copious evolution of ethane (CH₃CH₃, C₂H₆) from coadsorbed hydrogen and ethylene (CH₂CH₂, C₂H₄) on Pt(1 1 1). Hydrogen adatoms effectively (in a 1:1 stoichiometry) remove sites from interaction with chemisorbed 1,3-butadiene, but do not affect adjacent sites. The adsorption energy of coadsorbed 1,3-butadiene is not affected by the presence of hydrogen on Pt(1 1 1). The chemisorbed 1,3-butadiene on hydrogen preadsorbed Pt(1 1 1) completely dehydrogenates to H₂ and surface carbon upon heating without any molecular desorption detected, which is identical to that observed on clean Pt(1 1 1). In addition to revealing aspects of site blocking that should have broad implications for hydrogen coadsorption with hydrocarbon molecules on transition metal surfaces in general, these results also provide additional basic information on the surface science of selective catalytic hydrogenation of butadiene in butadiene-butene mixtures.     

Structural study of thin films prepared from tungstate glass matrix by Raman and X-ray absorption spectroscopy

Thin films were prepared using glass precursors obtained in the ternary system NaPO₃BaF₂WO₃ and the binary system NaPO₃WO₃ with high concentrations of WO₃ (above 40% molar). Vitreous samples have been used as a target to prepare thin films. Such films were deposited using the electron beam evaporation method onto soda-lime glass substrates. Several structural characterizations were performed by Raman spectroscopy and X-ray Absorption Near Edge Spectroscopy (XANES) at the tungsten L_I and L_III absorption edges. XANES investigations showed that tungsten atoms are only sixfold coordinated (octahedral WO₆) and that these films are free of tungstate tetrahedral units (WO₄). In addition, Raman spectroscopy allowed identifying a break in the linear phosphate chains as the amount of WO₃ increases and the formation of POW bonds in the films network indicating the intermediary behavior of WO₆ octahedra in the film network. Based on XANES data, we suggested a new attribution of several Raman absorption bands which allowed identifying the presence of WO⁻ and WO terminal bonds and a progressive apparition of WOW bridging bonds for the most WO₃ concentrated samples (above 40% molar) attributed to the formation of WO₆ clusters.     

FTIR spectra and rovibrational analysis of the ν11 band of trans-ClHCCHF and ν10 of trans-ClHCCDF

High-resolution Fourier transform infrared spectra of natural trans-ClHCCHF and of its isotopologue trans-ClHCCDF have been recorded in the region between 700 and 1150 cm⁻¹ with the purpose to analyze the ν₁₁ fundamental of the main species and the ν₁₀ of its deuterated compound. Both bands, of symmetry species A″, present c-type envelope absorptions. Beside the expected features, the K structure of the P(J), Q(J), and R(J) manifolds was resolved and identified; the assignment of the rovibrational transitions was extended up to J = 92 and K_a = 13 for the trans-³⁵ClHCCHF and up to J = 86 and K_a = 10 for trans-³⁵ClHCCDF. More than 2900 and 2700 lines for the main and deuterated species, respectively, were analyzed by a least-squares procedure and reliable spectroscopic molecular parameters were determined for both isotopologues.     

Structural and electronic properties of matlockite MFX (MSr, Ba, Pb; XCl, Br, I) compounds

First-principles calculations have been used to study the structural and electronic properties of technologically important matlockite compounds MFX (MBa, Sr, Pb; XCl, Br, I) using a full potential linearized augmented plane-wave method within density functional theory. We used the local density approximation and the generalized gradient approximation, as well as the Engel-Vosko's GGA formalism to find the band gap and the partial density of states at equilibrium volume. We also optimized internal parameters by relaxing the atomic positions in the force directions. The calculated total energy allowed us to investigate several structural properties in particular the equilibrium lattice constants a and c, c/a ratio, bulk modulus, pressure derivative of the bulk modulus, cohesive energy, interatomic distances, interlayer distances along c axis and the angles between different atomic bonds. We calculated the valence charge density at the equilibrium volume for BaFCl and PbFCl and concluded that the bonding nature in these compounds is mainly ionic. Results are discussed and compared with experimental and other theoretical data.