Laser-excited spectra of Lu2SiO5:Ce scintillator

The emission spectra of Lu₂SiO₅:Ce single crystal under the excitation of 266 nm laser were investigated. The emission spectra of LSO single crystal show no temperature quenching from 20 to 300 K, under the excitation of 266 nm laser with 2 mJ pulse energy. With rising temperature, the Ce1 emission is slightly decreased, while the Ce2 emission is slightly increased. These results show the emissions of Ce1 and Ce2 is not only dependent on the concentration ratio but also influenced by the possible energy transfer processes, including Ce1 to Ce2, intrinsic STHs to Ce2 and the phonon-assisted transfer processes. The spectral thermal broadening and the spectral overlap become evident at high temperature, leading to the enhancement of energy transfer. When the excitation power lowers, the ratio of Ce1 and Ce2 emission increases, and is close to the Xe lamp ultraviolet (UV) excitation, suggesting that the energy transfer from Ce1 center to Ce2 center may be also dependent on the excitation power.     

Luminescent mechanism of Y2SiO5:Ce phosphor powder

A luminescent mechanism was constructed for the broad band emission spectra of the X₁ phase of the Y₂SiO₅:Ce phosphor powder. Four Gaussian peaks fit to the cathodoluminescent (CL) and photoluminescent (PL) spectra were attributed to the two different sites (A1 and A2) of the Ce³⁺ ion in the host matrix and the difference in orientation of the neighbour ions in the complex crystal structure. Each Ce³⁺ site gives rise to transitions from the 5d to the two (therefore two peaks) 4f energy levels (²F_5/2 and ²F_7/2 due to crystal field splitting). Energy transfer from other defect levels in the matrix was also observed.     

Cooperative emission study in ytterbium-doped Y2SiO5

Ytterbium ions infrared and visible cooperative luminescences, resulting from YAG laser and selective site excitations, in (6%) Yb-doped Y₂SiO₅ thin film are analyzed. Magnetically coupled Yb-Yb ion pairs seem to play a major role in energy transfer and cooperative emission, confirming the prevalence of superexchange mechanisms.     

Luminescence characteristics of Pb centres in undoped and Ce-doped Lu3Al5O12 single-crystalline films and Pb→Ce energy transfer processes

At 4.2-350 K, the steady-state and time-resolved emission and excitation spectra and luminescence decay kinetics were studied under excitation in the 2.5-15 eV energy range for the undoped and Ce³⁺-doped Lu₃Al₅O₁₂ (LuAG) single-crystalline films grown by liquid phase epitaxy method from the PbO-based flux. The spectral bands arising from the single Pb²⁺-based centres were identified. The processes of energy transfer from the host lattice to Pb²⁺ and Ce³⁺ ions and from Pb²⁺ to Ce³⁺ ions were investigated. Competition between Pb²⁺ and Ce³⁺ ions in the processes of energy transfer from the LuAG crystal lattice was evidenced especially in the exciton absorption region. Due to overlap of the 3.61 eV emission band of Pb²⁺ centres with the 3.6 eV absorption band of Ce³⁺ centres, an effective nonradiative energy transfer from Pb²⁺ ions to Ce³⁺ ions takes place, resulting in the appearance of slower component in the luminescence decay kinetics of Ce³⁺ centres and decrease of the Ce³⁺-related luminescence intensity.     

Quenching of thermo-stimulated photo-ionization by energy transfer in CaAl4O7: Tb, Ce

Crystal fibers of Ce³⁺ and Tb³⁺ singly doped and co-doped CaAl₄O₇ were grown by the LHPG method. Photoluminescence, excitation spectra and photoconduction were measured. Thermo-stimulated photo-ionization (delocalization) of electrons from the lowest field component of the 5d excited state of Ce³⁺ was observed in the Ce³⁺ singly doped sample under excitation at 355 nm. The 5d sublevel was found to locate at 0.3 eV below the conduction band of the host. However, the thermo-stimulated photo-ionization was greatly quenched due to the fast energy transfer from the 5d sublevel to Tb³⁺ ions in the Ce³⁺/Tb³⁺ double doped sample.     

Synthesis, microstructure and photoluminescence of Eu/Tb activated Y2SiO5 nanophosphors by new silicate sources

Y_2−xTb_xSiO₅ and Y_2−xEu_xSiO₅ nanophosphors with seven different kinds of silicate sources were synthesized by sol-gel method. The structures have been investigated to be composed of nanometer-size grains of 30-60 nm through X-ray diffraction (XRD) and scanning electron microscopy (SEM) was used to compare the different morphology of patterns from seven different silicon sources. The photoluminescence of Y_2−xTb_xSiO₅ was investigated as a function of silicate sources and the results revealed that these nanometer materials showed the characteristic emission ⁵D₄ → ⁷F_J (J = 6, 5, 4, 3) of Tb ions. The characteristic emission ⁵D₀ → ⁷F_J (J = 1, 2, 4) of Eu ions was also found in the materials of Y_2−xEu_xSiO₅.     

Photoluminescence characteristics of energy transfer between Er and Bi in Gd2O3: Er, Bi

The phosphors, Bi³⁺- activated Gd₂O₃:Er³⁺, were prepared by sol-gel combustion method, and their photoluminescent properties were investigated under ultraviolet light excitation. The emission spectrum exhibited sharp peaks at about 520, 535, 545, 550 and 559 nm due to (²H_11/2, ⁴S_3/2)→⁴I_15/2 transitions of Er³⁺ ions. The luminescent intensity was remarkably improved by the incorporation of Bi³⁺ ions under 340 nm light excitation, which suggested very efficient energy transfer from Bi³⁺ ions to Er³⁺ions. The introducing of Bi³⁺ ions broadened the excitation band of the phosphor, of which a new strong peak occurred ranging from 320 to 360 nm due to the 6s²→6s6p transition of Bi³⁺ ions. There is significant energy overlap between the emission band of Bi³⁺ ions and the excitation band of Er³⁺ ions. Under 340 nm light excitation, Bi³⁺ absorbed most of the energy and transferred it to Er³⁺. The energy transfer probability from Bi³⁺ to Er³⁺ is strongly dependent on the Bi³⁺ ion concentration. Also, the sensitization effectiveness was studied and discussed in this paper.     

Characteristic properties of Y2SiO5:Ce thin films grown with PLD

Three different gases (nitrogen (N₂), oxygen (O₂) and argon (Ar)) were used as background gases during the growth of pulsed laser deposition (PLD) Y₂SiO₅:Ce thin films. A Krypton fluoride laser (KrF), 248 nm was used for the PLD of the films on silicon (Si) (1 0 0) substrates. The effect of the background gases on the surface morphology, crystal growth and luminescent properties were investigated. All the experimental parameters, the gas pressure (455 mT), the substrate temperature (600 °C), the pulse frequency (8 Hz), the number of pulses (4000) and the laser fluence (1.6±0.2) J/cm² were kept constant. The only parameter that was changed during the deposition was the ambient gas species. The surface morphology and average particle sizes were monitored with scanning electron microscopy (SEM) and atomic force microscopy (AFM). X-ray diffraction (XRD) and Auger electron spectroscopy (AES) were used to determine the crystal structure and composition, respectively. Cathodo- (CL) and photoluminescence (PL) were used to measure the luminescent intensities for the different phosphor thin films. The nature of the particles, ablated on the substrate, is related to the collisions between the ejected particles and the ambient gas particles. The CL and PL intensities also depend on the particle sizes. A 144 h (coulomb dose of 1.4×10⁴ C cm⁻²) electron degradation study on the thin films ablated in the Ar gas environment resulted in a decrease in the main CL intensity peak at 440 nm and to the development of a new very broad luminescent peak spectra ranging from 400 to 850 nm due to the growth of a SiO₂ layer on the surface.     

Luminescence and Tb-Ce-Eu ion energy transfer in single-crystalline films of Tb3Al5O12:Ce,Eu garnet

The paper is devoted to investigation of the processes of excitation energy transfer between the host cations (Tb³⁺ ions) and the activators (Ce³⁺ and Eu³⁺ ions) in single-crystalline films of Tb₃Al₅O₁₂:Ce,Eu (TbAG:Ce,Eu) garnet which is considered as a promising luminescent material for the conversion of LED's radiation. The cascade process of excitation energy transfer is shown to be realized in TbAG:Ce,Eu: (i) from Tb³⁺ ions to Ce³⁺ and Eu³⁺ ions; (ii) from Ce³⁺ ions to Eu³⁺ ions by means of dipole-dipole interaction and through Tb³⁺ ion sublattice.     

Synthesis and luminescence investigation of RE (Eu, Tb and Ce)-doped lithium silicate (Li2SiO3)

Synthesis and photoluminescence (PL) investigations of lithium metasilicate doped with Eu³⁺, Tb³⁺ and Ce³⁺ were carried out. PL spectra of Eu-doped sample showed peaks corresponding to the ⁵D₀→⁷F_j (j=1, 2, 3 and 4) transitions under ultraviolet excitation. Strong red emission coming from the hypersensitive ⁵D₀→⁷F₂ transition of Eu³⁺ ion suggested the presence of the dopant ion in structurally disordered environment. Tb³⁺-doped silicate sample showed blue-green emission corresponding to the ⁵D₄→⁷F_j (j=6, 5 and 4) transitions. Ce-doped sample under excitation from UV, showed a broad emission band in the region 350-370 nm with shoulders around 410 nm. The fluorescence lifetimes of Eu³⁺ and Tb³⁺ ions were found out to be 790 and 600 μs, respectively. For Ce³⁺, the lifetime was of the order of 45 ns. PL spectra of the europium- and terbium-doped samples were compared with commercial red (Y₂O₃:Eu³⁺) and green (LaPO₄:Tb³⁺) phosphors, respectively. It was found that the emission from the doped silicate sample was 37% of the commercial phosphor in case of the Tb-doped sample and 8% of the commercial phosphor in case of the Eu-doped sample.     

In situ sol-gel composition of multicomponent hybrid precursors to luminescent novel unexpected microrod of Y2SiO5:Eu employing different silicate sources

Y₂SiO₅ doped with Eu³⁺ were in situ synthesized by a hybrid precursor assembly sol-gel technology employing four different silicate sources, 3-aminopropyl-trimethoxysilane (APMS), 3-aminopropyl-triethoxysilane (APES), 3-aminopropyl-methyl-diethoxysilane (APMES) and tetraethoxysilane (TEOS), respectively. The SEM result shows that there exist some novel unexpected morphological microrod structures owing to using the crosslinking reagents other than TEOS as silicate source. The photoluminescent properties of Y₂SiO₅:Eu³⁺ have been studied as a function of Eu³⁺ doping concentration. A cross-relaxation process between identical Eu³⁺ ions results in the quenching of the ⁵D₁ emission for high concentration sample.     

Highly efficient transparent Zn2SiO4:Mn phosphor film on quartz glass

Highly efficient transparent Zn₂SiO₄:Mn²⁺ film phosphors on quartz substrates were deposited by the thermal diffusion of sputtered ZnO:Mn film. They show a textured structure with some preferred orientations. Our film phosphor shows, for the best photoluminescence (PL) brightness, a green PL brightness of about 20% of a commercial Zn₂SiO₄:Mn²⁺ powder phosphor screen. The film shows a high transmittance of more than 10% at the red-color region. The excellence in PL brightness and transmittance can be explained in terms of the textured crystal growth with a continuous gradient of Zn₂SiO₄: Mn²⁺ crystals.     

New red phosphors BaZr(BO3)2 and SrAl2B2O7 doped with Eu for PDP applications

Vacuum ultraviolet (VUV) excitation and photoluminescence (PL) characteristics of Eu³⁺ ion doped borate phosphors; BaZr(BO₃)₂:Eu³⁺ and SrAl₂B₂O₇:Eu³⁺ are studied. The excitation spectra show strong absorption in the VUV region with the absorption band edge at ca. 200 nm for BaZr(BO₃)₂:Eu³⁺ and 183 nm for SrAl₂B₂O₇:Eu³⁺, respectively, which ensures the efficient absorption of the Xe plasma emission lines. In BaZr(BO₃)₂:Eu³⁺, the charge transfer band of Eu³⁺ does not appear strongly in the excitation spectrum, which can be enhanced by co-doping Al³⁺ ion into the BaZr(BO₃)₂ lattices. The luminescence intensity of BaZr(BO₃)₂:Eu³⁺ is also increased by Al³⁺ incorporation into the lattices. The PL spectra show the strongest emission at 615 nm corresponding to the electric dipole ⁵D₀→⁷F₂ transition of Eu³⁺ in both BaZr(BO₃)₂ and SrAl₂B₂O₇, similar to that in YAl₃(BO₃)₄, which results in a good color purity for display applications.     

Enhancement of red spectral emission intensity of Y3Al5O12:Ce phosphor via Pr co-doping and Tb substitution for the application to white LEDs

We have enhanced color-rendering property of a blue light emitting diode (LED) pumped white LED with yellow emitting Y₃Al₅O₁₂:Ce³⁺ (YAG:Ce) phosphor using addition of Pr and Tb as a co-activator and host lattice element, respectively. Pr³⁺ addition to YAG:Ce phosphor resulted in sharp emission peak at about 610 nm through ¹D₂→³H₄ transition. And when Tb³⁺ substituted Y³⁺ sites, Ce³⁺ emission band shifted to a longer wavelength due to larger crystal field splitting. Y₃Al₅O₁₂:Ce³⁺, Pr³⁺ and (Y_1−xTb_x)₃Al₅O₁₂:Ce³⁺ phosphors were coated on blue LEDs to fabricate white LEDs, respectively, and their color-rendering indices (CRIs, R_a) were measured. As a consequence of the addition of Pr³⁺ or Tb³⁺, CRI of the white LEDs improved to be R_a=83 and 80, respectively. Especially, blue LED pumped (Y_0.2Tb_0.8)₃Al₅O₁₂:Ce³⁺ white LED showed both strong luminescence and high color-rendering property.     

Preparation and spectroscopic properties of Nb2O5 nanorods

Nb₂O₅ nanorods have been prepared using water/ethanol media. The samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-visible absorption and photoluminescence spectroscopy. The as-prepared Nb₂O₅ nanorods appeared to be single pseudohexagonal (TT-Nb₂O₅) phase. From the photoluminescence spectrum, two emission bands at 407 and 496 nm, respectively, were observed. The origin of the luminescence was discussed in detail.     

In situ sol-gel composition of multicomponent hybrid precursor to hexagon-like Zn2SiO4:Tb microcrystalline phosphors with different silicate sources

Zn₂SiO₄ doped with Tb³⁺ were in situ synthesized by a modified sol-gel technology with the assembly hybrid precursor employed four different silicate sources, i.e. 3-aminopropyl-trimethoxysilane (APMS), 3-aminopropyl-triethoxysilane (APES), 3-aminopropyl-methyl-diethoxysilane (APMES) and tetraethoxysilane (TEOS), respectively. The SEM result shows that there exist some novel unexpected micromorphological structures of hexagon-like with the dimension of 0.5-1.0 μm. The photoluminescent properties of Zn₂SiO₄:Tb³⁺ phosphors have been studied as a function of Tb³⁺ doping concentration. Cross-relaxation process between identical Tb³⁺ ions results in the quenching of the ⁵D₃ emission for high concentration sample.     

Luminescence properties of red-emitting praseodymium-activated BaTi4O9 phosphor

The photoluminescence and low-voltage cathodoluminescence characteristics of BaTi₄O₉:Pr³⁺ were investigated. The excitation band of intervalence charge transfer (IVCT) of BaTi₄O₉:Pr³⁺ emerged distinctly at 330 nm. The resultant emissions appeared at 606-643 nm corresponding to the ¹D₂→³H₄ transition. In BaTi₄O₉:Pr³⁺, the emission of ³P₀→³H₄ transition at 490 nm was not observed. The results were in a pure red color emission.     

Photoluminescence investigations of Zn2SiO4 co-doped with Eu and Tb ions

Zinc silicate phosphors co-doped with Eu³⁺ ions and also with both Eu³⁺ and Tb³⁺ ions were prepared by high temperature solid state reaction in air or reducing atmosphere. The luminescence characteristics of the prepared phosphors were investigated. While in the samples prepared in air, Eu³⁺ emission was found to be dominant over Tb³⁺ emission, in the samples prepared in reducing atmosphere, intense Eu²⁺ emission at 448 nm was found to be predominant over narrow Tb³⁺ emission. Luminescence studies showed that Eu³⁺ ions occupy asymmetric sites in Zn₂SiO₄ lattice. The intense f-f absorption peak of Eu³⁺ at 395 nm observed in these phosphors suggests their potential as red emitting phosphors for near ultra-violet light emitting diodes.     

Synthesis and optical properties of KZnLa0.99Nd0.01(VO4)2 triple vanadate(V)—New promising laser materials

In an attempt to find a neodymium-vanadate system with long lifetime of ⁴F_3/2 level and relatively strong ⁴F_3/2→⁴I_11/2 emission for laser applications, the optical properties of Nd³⁺ in a new KZnLa(VO₄)₂ host is reported. The crystalline samples were obtained at 900 °C in air. The samples were crystallized in monoclinic system and were isostructural with KZnLa(PO₄)₂. KZnLa_0.99Nd_0.01(VO₄)₂ strongly emits in the near infrared range with the maxima at 871.6 and 1057 nm upon excitation through the ⁴F_5/2 level (808 nm) or by the charge transfer bands of VO₄³⁻. The lifetime of ⁴F_3/2 level of Nd³⁺ ion is larger than that observed in other neodymium-vanadates systems.     

Photophysical analysis of the organic complex [Eu(C12H8N2)2](NO3)3

We have determined the photophysical properties of [Eu(C₁₂H₈N₂)₂](NO₃)₃, (EuPhen), a complex which is very promising for photonic and optoelectronic applications, because of its easy synthetic procedure and high thermal stability (up to 300 °C) combined with large sensitization efficiency and good emission quantum yield. Available experimental absorption and emission data have been analyzed by using Judd-Ofelt analysis. Moreover, semi-empirical calculations have been used to determine the structure of the complex and to interpret the convoluted shape of the absorption spectrum.