Quenching of thermo-stimulated photo-ionization by energy transfer in CaAl4O7: Tb, Ce

Crystal fibers of Ce³⁺ and Tb³⁺ singly doped and co-doped CaAl₄O₇ were grown by the LHPG method. Photoluminescence, excitation spectra and photoconduction were measured. Thermo-stimulated photo-ionization (delocalization) of electrons from the lowest field component of the 5d excited state of Ce³⁺ was observed in the Ce³⁺ singly doped sample under excitation at 355 nm. The 5d sublevel was found to locate at 0.3 eV below the conduction band of the host. However, the thermo-stimulated photo-ionization was greatly quenched due to the fast energy transfer from the 5d sublevel to Tb³⁺ ions in the Ce³⁺/Tb³⁺ double doped sample.     

Photoluminescence and phosphorescence properties of MAl2O4:Eu, Dy (M=Ca, Ba, Sr) phosphors prepared at an initiating combustion temperature of 500 °C

Eu²⁺ and Dy³⁺ co-doped calcium aluminate, barium aluminate and strontium aluminate phosphors were synthesized at an initiating combustion temperature of 500 °C using urea as an organic fuel. The crystallinity of the phosphors was investigated by using X-ray diffraction (XRD) and the morphology was determined by a scanning electron microscope (SEM). The low temperature monoclinic structure for both CaAl₂O₄ and SrAl₂O₄ and the hexagonal structure of BaAl₂O₄ were observed. The effect of the host materials on the photoluminescence (PL) and phosphorescence properties were investigated by using a He-Cd Laser and a Cary Eclipse fluorescence spectrophotometer, respectively. The broad band emission spectra observed at 449 nm for CaAl₂O₄:Eu²⁺, Dy³⁺, 450 nm (with a shoulder-peak at 500 nm) for BaAl₂O₄:Eu²⁺, Dy³⁺ and 528 nm for SrAl₂O₄:Eu²⁺, Dy³⁺ are attributed to the 4f⁶5d¹ to 4f⁷ transition in the Eu²⁺ ion in the different hosts.     

Effective energy transfer between Ceand Eu in CaAl2Si2O8 host under vacuum ultraviolet illumination

We presented the energy transfer from Ce³⁺ to Eu²⁺ in CaAl₂Si₂O₈ host. The Ce³⁺-doped CaAl₂Si₂O₈ phosphor had a strong emission band at 378 nm under the vacuum ultraviolet (VUV) light. This emission spectrum of Ce³⁺ well overlapped with the excitation spectrum of Eu²⁺ under the UV illumination. As a result, the energy transfer from Ce³⁺ to Eu²⁺ in CaAl₂Si₂O₈ matrix was observed under VUV excitation, which resulted in a significant enhancement of the emission peak intensity at 446 nm. More details about the luminescent properties were presented.     

Preparation and optical properties of Ce activated (Ca1 − x,Srx)Al2Si2O8 phosphors

(Ca_1 − x, Sr_x)Al₂Si₂O₈:0.06Ce³⁺, M⁺ (M⁺ = Li⁺, Na⁺, K⁺) phosphors have been prepared by conventional solid-state reaction method. The structural and optical properties of the phosphors were characterized by X-ray diffraction (XRD) technique and spectrophotometer, respectively. A regular variation was found among the XRD patterns of (Ca_1 − x, Sr_x)Al₂Si₂O₈:0.06Ce³⁺ phosphors based on the changing of Sr content. With the increase of Sr content, the maximum of emission band presented slight blue shifts (~ 15 nm). The luminescence intensity of CaAl₂Si₂O₈:0.06Ce³⁺ and SrAl₂Si₂O₈:0.06Ce³⁺ were significantly enhanced when K⁺ and Li⁺ were incorporated, respectively.     

VUV spectroscopic properties of Ce and Pr-doped AREP2O7-type alkali rare earth diphosphates (A=Na, K, Rb, Cs; RE=Y, Lu)

Spectroscopic properties of Ce³⁺ and Pr³⁺-doped AREP₂O₇-type alkali rare earth diphosphates (A=Na, K, Rb, Cs; RE=Y, Lu) have been investigated using VUV spectroscopy technique. Ce³⁺-doped samples show typical Ce³⁺ emission in the range of 325-450 nm. The strong host absorption band starting at around 160 nm indicates that the optical band gap of AREP₂O₇ hosts is at least 7.7 eV, and the host→Ce³⁺ energy transfer process is rather efficient. However, AREP₂O₇:Pr³⁺ samples show less efficient host→Pr³⁺ energy transfer. The direct Pr³⁺ 4f²→4f¹5d¹ excitation, which are 12160±640 cm⁻¹ higher respect to that of Ce³⁺, leads to strong 4f¹5d¹→4f² emission bands in the range of 230-325 nm but no obvious 4f²→4f² emission lines.     

Near-infrared emissions with widely different widths in two kinds of Er-doped oxide glasses with high refractive indices and low phonon energies

Er³⁺-doped alkali-barium-bismuth-tellurite (LKBBT) and alkali-barium-bismuth-gallate (LKBBG) glasses with high refractive indices and low phonon energies have been designed, fabricated, characterized and compared. Intense 1.53 μm emissions with widely different widths in the two kinds of glasses were observed and recorded under 980 nm diode laser excitation. The full-widths at half-maximum of the 1.53 μm emission bands in LKBBT and LKBBG glasses are 58 and 40 nm, and the lifetimes of them were measured to be 3.21 and 3.97 ms, respectively. The quantum efficiencies for the ⁴I_13/2 level in both glasses are almost 100%. The 1.53 μm broad and narrow emissions with high spontaneous emission probabilities and large emission cross-sections indicate that Er³⁺-doped LKBBT and LKBBG glasses are suitable materials in developing broadband optical amplifier and infrared laser, respectively.     

Synthesis and luminescence properties of needle-like SrAl2O4:Eu, Dy phosphor via a hydrothermal co-precipitation method

Needle-like SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors had been prepared by calcining the precursors obtained from hydrothermal process at the temperature of 1100 °C in a weak reductive atmosphere of active carbon. The crystal structure, morphology and optical properties of the composites were characterized. X-ray diffraction (XRD) patterns illustrated that the single-phase SrAl₂O₄ was formed at 1100 °C, which is much lower than that prepared by the traditional method. The transmission electron microscope (TEM) observation revealed the precursors and the resulted SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors had well-dispersed distribution and needle-like morphology with an average diameter about 150 nm at the center and the length up to 1 μm. After irradiation by ultraviolet radiation with 350 nm for 5 min, the phosphors emit green color long-lasting phosphorescence corresponding to the typical emission of Eu²⁺ ion, both the PL spectra and luminance decay revealed that the phosphors had efficient luminescent and long lasting properties.     

Observation of green emission from Ce-doped gadolinium oxide nanoparticles

Green emission at around 500 nm is observed in Gd₂O₃:Ce³⁺ nanoparticles and the intensity is highly dependent on the concentration of Ce³⁺ in the nanoparticles. The luminescence of this emission displays both picosecond (ps) and millisecond (ms) lifetimes. The ms lifetime is over four orders of magnitude longer than typical luminescence lifetimes (10-40 ns) of Ce³⁺ in traditional Ce³⁺ doped phosphors and therefore likely originates from defect states. The picosecond lifetime is shorter than the typical Ce³⁺ value and is also likely due to defect or surface states. When the samples are annealed at 700 °C, this emission disappears possibly due to changes in the defect moieties or concentration. In addition, a blue emission at around 430 nm is observed in freshly prepared Gd₂O₃ undoped nanoparticles, which is attributed to the stabilizer, polyethylene glycol biscarboxymethyl ether. On aging, the undoped particles show similar emission to the doped particles with similar luminescence lifetimes. When Eu³⁺ ions are co-doped in Gd₂O₃:Ce nanoparticles, both the green emission and the emission at 612 nm from Eu³⁺ are observed.     

The effects of substrate temperature on the structure, morphology and photoluminescence properties of pulsed laser deposited SrAl2O4:Eu,Dy thin films

In this study, SrAl₂O₄:Eu²⁺,Dy³⁺ thin film phosphors were deposited on Si (1 0 0) substrates using the pulsed laser deposition (PLD) technique. The films were deposited at different substrate temperatures in the range of 40-700 °C. The structure, morphology and topography of the films were determined by using X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM). Photoluminescence (PL) data was collected in air at room temperature using a 325 nm He-Cd laser as an excitation source. The PL spectra of all the films were characterized by green phosphorescent photoluminescence at ∼530 nm. This emission was attributed to 4f⁶5d¹→4f⁷ transition of Eu²⁺. The highest PL intensity was observed from the films deposited at a substrate temperature of 400 °C. The effects of varying substrate temperature on the PL intensity were discussed.     

Effect of Ce codoping on Er-doped bismuth-germanate glass and fiber under 980 nm excitation

Er³⁺/Ce³⁺ codoped bismuth-germanate glasses with the composition of Bi₂O₃-GeO₂-Ga₂O₃-Na₂O were prepared by the conventional melt-quenching method. The absorption spectra, fluorescence spectra, upconversion emission and lifetimes of Er³⁺ ions were measured, and the effects of Ce³⁺-doping on the spectroscopic properties of 1.53 μm band fluorescence of Er³⁺ ion were investigated based on the analysis of energy transfer between Er³⁺ and Ce³⁺ ions. The results indicate that the 1.53 μm band fluorescence intensity can be improved evidently with the Ce³⁺-doped concentration under the excitation of 980 nm. Meanwhile, the theoretical simulation based on the population rate equation and light power propagation equation indicates that the C + L band signal gain can also be improved dramatically by introducing Ce³⁺ ions into the Er³⁺-doped bismuth-germanate glass fiber. Therefore, it is necessary to introduce Ce³⁺ ions when Er³⁺-doped bismuth-germanate glass with low phonon energy is applied to the 1.53 μm band broad Er³⁺-doped fiber amplifier (EDFA).     

Luminescent properties of SrAl2B2O7: Ce, Tb

By using metal nitrates as starting materials, SrAl₂B₂O₇: Tb³⁺ and SrAl₂B₂O₇: Ce³⁺, Tb³⁺ powder phosphors were prepared by sol-gel method. X-ray diffraction (XRD), photoluminescence excitation and emission, as well as kinetic decays were employed to characterize the resulting samples. The results show that energy transfers from Ce³⁺ to Tb³⁺ ions. The emission intensity of Tb³⁺ ions in SrAl₂B₂O₇ could be greatly intensified when Ce³⁺ ions are doped into SrAl₂B₂O₇: Tb³⁺. The decay times of SrAl₂B₂O₇: Tb³⁺ were prolonged when Ce³⁺ ions were doped. The doping of Ce³⁺ ions not only improved the luminescent intensity, but also made the materials gets stable luminescent properties.     

Effects of citric acid additive on photoluminescence properties of YAG:Ce nanoparticles synthesized by glycothermal reaction

We synthesize Y₃Al₅O₁₂:Ce³⁺ (YAG:Ce³⁺) nanoparticles in the presence of citric acid by glycothermal method. Fourier transform infrared absorption spectroscopy measurement indicates that the intensity of the peak corresponding to carboxyl groups coordinating to the nanoparticles increases with increasing amount of citric acid. At the same time, the primary particle diameter decreases from 10.2 to 4.0 nm. In addition, the internal quantum efficiency of the photoluminescence (PL) due to the 4f-5d transition of Ce³⁺ increases from 22.0% to 40.1% with increasing amount of citric acid. Two kinds of PL decay lifetimes, 16-26 and 72-112 ns, are detected for YAG:Ce³⁺ nanoparticles, whereas the micron sized YAG:Ce³⁺ bulk shows the lifetime of 57 ns. We discuss these phenomena from the aspects of the coordination of citric acid and the incorporation of Ce³⁺ ions into the nanoparticles.     

Synthesis and optical properties of Er and Eu doped SrAl2O4 phosphor ceramic

We report, for the first time on luminescence from a Er³⁺ doped SrAl₂O₄ phosphor. Effects of Eu³⁺ doping were also studied. The influence of rare-earth doping in crystal structure and its optical properties were analysed by means of X-ray diffraction (XRD), Raman scattering, optical absorption, excitation and emission (PL) spectroscopy, thermally stimulated luminescence (TSL) and scanning electron microscope (SEM). Luminescence spectra and luminescence decay curves for Er³⁺ transitions in the near infrared region were recorded. The PL maximum for Eu doped SrAl₂O₄ is obtained at 620 nm and corresponds to the orange region of the spectrum. Diffraction patterns reveal a dominant phase, characteristic of the monoclinic SrAl₂O₄ compound and the presence of dopants has no effect on the basic crystal structure of SrAl₂O₄. The shapes of the glow curves are different for each dopant irradiated with either a ⁹⁰Sr-⁹⁰Y beta source, or UV light at 311 nm, and in detail the TL signals differ somewhat between Er and Eu dopants.     

Effect of interface states associated with transitional nanophase precipitates in the enhancement of red emission from SrAl12O19:Pr by Ti incorporation

SrAl₁₂O₁₉:Pr³⁺, Ti⁴⁺ phosphor suitable for field emission displays is prepared by the wet chemical gel-carbonate method and the mechanism of enhancement in red photoluminescence (PL) intensity with Ti⁴⁺ therein has been investigated. The PL spectra of Pr³⁺ show both ¹D₂-³H₄ and ³P₀-³H₆ emission in the red region with very weak intensity when excited at 355 nm. The emission intensity has increased by about 100 times at room temperature in the compositional range SrAl_12−xTi_xO_19+x/2:Pr³⁺, with 0.1≤x≤0.3 in comparison to Ti-free SrAl₁₂O₁₉:Pr³⁺. TEM investigations show the presence of exsolved nanophase of SrAl₈Ti₃O₁₉, the precipitation of which is preceded by the presence of defect centers at the interfacial regions between the semicoherent transient phase and the parent SrAl₁₂O₁₉ matrix. The presence of transitional nanophase and the associated defects modify the excitation-emission process by way of formation of electronic sub-levels at lower energy (3.5 eV) than the band gap of SrAl₁₂O₁₉ (∼7 eV) followed by non-resonance energy transfer to Pr³⁺ level, leading to magnetic-dipole related red emission with enhanced intensity. The PL intensity of Pr³⁺ decreases at high Ti⁴⁺ concentrations (x>0.3) due to higher extent of segregation of non-emissive SrAl₈Ti₃O₁₉:Pr³⁺ phase.     

Thermal stability and spectroscopic properties of Er-doped lead fluorogermanate glasses

The thermal characterization and spectroscopic properties of Er³⁺-doped 0.6GeO₂-(0.4-x)PbO-xPbF₂ glasses were investigated experimentally. With the replacement of PbO by PbF₂ the thermal stability of glasses is improved and the infrared fluorescence intensity at 1530 nm is increased. The Judd-Ofelt intensity parameters, radiative transition rates, and fluorescence lifetimes of the excited ⁴I_13/2 level of Er³⁺ ions were calculated from Judd-Ofelt theory. The asymmetric ligand field around Er³⁺ ions resulted from the incorporation of PbF₂ into germanate glasses, broadens the infrared emission spectra at 1530 nm. Upconversion luminescence in the investigated glasses was observed at room temperature under the excitation of 976 nm laser diode. The glass 0.6GeO₂-0.3PbO-0.1PbF₂ exhibits the maximum upconversion emission intensity, while no frequency upconversion luminescence was observed in the 0.6GeO₂-0.4PbO glass. The quadratic dependence of the green and red emissions on excitation power indicates that two-photon absorption contributes to the visible emission under the 976-nm excitation.     

Broad yellow orange emission from SrAl2O4:Pr phosphor with blue excitation for application to white LEDs

Photoluminescence excitation to intermediate atomic levels of rare earth activator ion (praseodymium) situated intragap in alkaline earth aluminate (AEA) SrAl₂O₄ has been tailored. This lead to blue excitation (2.7 eV) of large band gap AEA possible. Photoluminescence (PL) emission in the visible region extends from 525 to 650 nm corresponding to transition from ³P₀ and ¹D₂ excited states to different ³H_J and ³F_J states of Pr³⁺, broadened by crystal field effect of SrAl₂O₄. Thus SrAl₂O₄:Pr³⁺ promise to be a good candidate for solid state lighting in conjunction with blue LED.     

Synthesis and luminescence investigation of RE (Eu, Tb and Ce)-doped lithium silicate (Li2SiO3)

Synthesis and photoluminescence (PL) investigations of lithium metasilicate doped with Eu³⁺, Tb³⁺ and Ce³⁺ were carried out. PL spectra of Eu-doped sample showed peaks corresponding to the ⁵D₀→⁷F_j (j=1, 2, 3 and 4) transitions under ultraviolet excitation. Strong red emission coming from the hypersensitive ⁵D₀→⁷F₂ transition of Eu³⁺ ion suggested the presence of the dopant ion in structurally disordered environment. Tb³⁺-doped silicate sample showed blue-green emission corresponding to the ⁵D₄→⁷F_j (j=6, 5 and 4) transitions. Ce-doped sample under excitation from UV, showed a broad emission band in the region 350-370 nm with shoulders around 410 nm. The fluorescence lifetimes of Eu³⁺ and Tb³⁺ ions were found out to be 790 and 600 μs, respectively. For Ce³⁺, the lifetime was of the order of 45 ns. PL spectra of the europium- and terbium-doped samples were compared with commercial red (Y₂O₃:Eu³⁺) and green (LaPO₄:Tb³⁺) phosphors, respectively. It was found that the emission from the doped silicate sample was 37% of the commercial phosphor in case of the Tb-doped sample and 8% of the commercial phosphor in case of the Eu-doped sample.     

Luminescence properties of red-emitting praseodymium-activated BaTi4O9 phosphor

The photoluminescence and low-voltage cathodoluminescence characteristics of BaTi₄O₉:Pr³⁺ were investigated. The excitation band of intervalence charge transfer (IVCT) of BaTi₄O₉:Pr³⁺ emerged distinctly at 330 nm. The resultant emissions appeared at 606-643 nm corresponding to the ¹D₂→³H₄ transition. In BaTi₄O₉:Pr³⁺, the emission of ³P₀→³H₄ transition at 490 nm was not observed. The results were in a pure red color emission.     

Persistent luminescence dosimetric properties of UV-irradiated SrAl2O4:Eu, Dy phosphor

Current radiation dosimetry methods involve the release of trapped charge carriers in the form of electrons-holes pairs generated by irradiation exposure of the dosimetric materials. Thermal and optical stimulations of the irradiated material freed the trapped charges that eventually recombine with interband centers producing the emission of light. The integrated intensity of the emitted light is proportional to the radiation dose exposure. In this work, we present an UV radiation dosimetry technique based on the characteristic persistence luminescence (PLUM) 4f⁶5d¹→4f⁷ electronic transition of Eu²⁺ ions in SrAl₂O₄:Eu²⁺, Dy³⁺. The dose assessment is carried out by measuring the PLUM signal integrated during a certain time. The PLUM performance of SrAl₂O₄:Eu²⁺, Dy³⁺ phosphor exhibited a linear behavior for the first 50 s of UV irradiation. For higher UV time exposure the behavior is sublinear with no apparent saturation during a 10 min period. The PLUM dosimetry response was performed at 400 nm that corresponds to the main band component of the PLUM excitation spectrum in the 250-500 nm range. The main advantage of a dosimeter device based on the PLUM of SrAl₂O₄:Eu²⁺, Dy³⁺ is that neither thermal nor optical stimulation is required, avoiding the need of cumbersome electronic photo/thermal stimulation equipment. Due to the highly efficient 250-500 nm PLUM response of SrAl₂O₄:Eu²⁺, Dy³⁺, it could have potential application as UV radiation dosimeter in the UV range of grate human health concerns caused by UV solar radiation.     

Potential PDP phosphors with strong absorption around 172 nm: Rare earth doped NaLaP2O7 and NaGdP2O7

NaLaP₂O₇ and NaGdP₂O₇ powder samples are prepared by solid-state reactions at 750 and 600 °C, respectively, and the VUV-excited luminescence properties of Ln³⁺ (Ln=Ce, Pr, Tb, Tm, Eu) in both diphosphates are studied. Ln³⁺ ions in both hosts show analogous luminescence. For Ce³⁺-doped samples, the five Ce³⁺ 5d levels can be clearly identified. As for Pr³⁺ and Tb³⁺-doped samples, strong 4f-5d absorption band around 172 nm is observed, which matches well with Xe-He excimer in plasma display panel (PDP) devices. As a result, Pr³⁺ can be utilized as sensitizer to absorb 172 nm VUV photon and transfer energy to appropriate activators, and Tb³⁺-doped NaREP₂O₇(RE=La, Gd) are potential 172 nm excited green PDP phosphors. For Tm³⁺ and Eu³⁺-doped samples, the Tm³⁺-O²⁻ charge transfer band (CTB) is observed to be at 177 nm, but the CTB of Eu³⁺ is observed at abnormally low energy position, which might originate from multi-position of Eu³⁺ ions. The similarity in luminescence properties of Ln³⁺ in both hosts indicates certain structural resemblance of coordination environment of Ln³⁺ in the two sodium rare earth diphosphates.