Luminescence properties of Cr:Y3Al5O12 nanocrystals

The Cr³⁺-doped Y₃Al₅O₁₂ (YAG) nanocrystalline powders were prepared by the Pechini method. The structural and phase evolution studies were performed using X-ray powder diffraction (XRD) method. The TEM images were taken in order to characterize the grain size and morphology of the Cr:YAG nanocrystals. Their excitation and luminescence spectra were investigated. It was found that luminescence properties of the Cr:YAG nanocrystals were strongly affected by size of the particles. With increasing the grain size the electron-phonon coupling decreases whereas the crystal-field strength increases.     

Hydrothermal preparation and photoluminescent properties of MgAl2O4: Eu spinel nanocrystals

Nanoplates of the MgAl₂O₄ spinel doped with Eu³⁺ ions were prepared by a microwave assisted hydrothermal method. Structural properties of the precursor calcined at 700 and 1000 ^oC powders were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). According to the obtained XRD patterns the formation of single-phase spinels after calcination was confirmed. The average spinel particle size was determined to be 11 nm after calcination at 700 °C and it increased up to 14 nm after calcination at 1000 °C. The photoluminescent properties of prepared powders with different Eu³⁺ ion concentrations (0-5% mol) were investigated using excitation and emission spectroscopy at room and low temperatures (77 K).     

Preparation and luminescent properties of cubic Eu:Y2O3 nanocrystals and comparison to bulk Eu:Y2O3

Y₂O₃:Eu³⁺ nanocrystals were prepared by combustion synthesis. The particle size estimated by X-ray powder diffraction (XRD) was about 10 nm. A blue-shift of the charge-transfer (CT) band in excitation spectra was observed in Y₂O₃:Eu³⁺ nanocrystals compared with bulk Y₂O₃:Eu³⁺. The electronic structure of Y₂O₃ is calculated by density functional method and exchange and correlation have been treated by the generalized gradient approximation (GGA) within the scheme due to Perdew-Burke-Ernzerhof (PBE). The calculated results show that the energy centroid of 5d orbital in nanocrystal has increasing trend compared with that in the bulk material. The bond length and bond covalency are calculated by chemical bond theory. The bond lengths of Y₂O₃:Eu³⁺ nanocrystal are shorter than those of the bulk counterpart and the bond covalency of Y₂O₃:Eu³⁺ nanocrystal also has an increasing trend. By combining centroid shift and crystal-field splitting, the blue-shift of the CT band is interpreted.     

Effects of Tb doping on the photoluminescence of Y2O3:Tb nanophosphors

The effects of Tb doping on the photoluminescence (PL) of Y₂O₃:Tb nanophosphors have been investigated. Nanophosphors were prepared by the glycine-nitrate solution combustion technique using yttria and terbia powders as precursors. PL excitation spectra at room temperature consist of two overlapping bands centered at 277 and 304 nm, whereas emission spectra comprise several groups of lines corresponding to the ⁵D₄→⁷F_J (J=1-6) 4f electronic transitions of the Tb⁺³ ions. A direct comparison of nanophosphor and bulk concentration-quenching curves was obtained by annealing the nanophosphor powder and converting it to bulk material without altering the Tb concentration. The peak in the nanophosphor concentration-quenching curve occurs at a concentration ∼3 times higher than that of the bulk.     

The properties of the Y2O3 films exposed at elevated temperature

Yttrium trioxide (Y₂O₃) thin films have been deposited on silicon (1 1 1) substrates by RF magnetron sputtering. The influences of thermal exposure at high temperature in air on the structure, the surface morphology, roughness, and the refractive index of the Y₂O₃ thin film were investigated by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), atomic force microscopy (AFM), and spectroscopic ellipsometry (SE). The results indicate that chemical composition of the as-deposited Y₂O₃ film is apparently close to the stoichiometric ratio, and it has a cubic polycrystalline structure but the crystallinity is poor. The monoclinic and cubic phases can coexist in the Y₂O₃ film after thermal exposure to 900 °C, and the monoclinic phase disappears completely after 300 s exposure to 950 °C. The changes of the surface morphology, roughness, and the refractive index of the Y₂O₃ film are closely related to the crystal structure, the internal stress, and various defects influenced by thermal exposure temperature and time.     

Y2O2S:Eu nanocrystals, a strong quantum-confined luminescent system

Trivalent europium-doped yttrium oxysulfide nanocrystals synthesized using sol-gel thermolysis show significant blue shifts in the excitation bands corresponding to fundamental absorption, charge-transfer absorption. A significant blue shift observed in the fundamental absorption edge for the nanocrystals having an average crystallite size (φ) in the range 9-15 nm indicates a strong quantum confinement with a Bohr exciton radius of 5-13 nm. Also, the diffuse reflectance spectra and the corresponding Kubelka-Munk plot indicate the possibility of profound decrease in the absorption coefficient of Eu³⁺-ligand charge-transfer species necessitating further studies in this wide-gap semiconductor nanocrystalline system.     

Improving monochromaticity of upconversion luminescence by codoping Eu ions in Y2O3:Ho, Yb nanocrystals

Upconversion (UC) luminescence of Y₂O₃:Ho³⁺, Yb³⁺ nanocrystals codoped with different concentrations of Eu³⁺ ions were investigated to improve the monochromaticity of the UC emission. The results show that the monochromaticity, quantified by a parameter SR, increases as the concentration of Eu³⁺ ions becomes higher, which is due to the energy transfer between ⁵I₇ (Ho³⁺) and ⁷F₆ (Eu³⁺). The energy transfer accelerates the relaxation of Ho³⁺ ions from the ⁵I₇ to ⁵I₈ state and then quenches the red emission. The influence of the Eu³⁺ concentration on the pump power dependence of the red UC fluorescence in Y₂O₃:Ho³⁺, Yb³⁺, Eu³⁺ nanocrystals is verified using the steady-state rate equation theory.     

Multiplication of electronic excitations in nanophosphors Lu2O3:Eu and Lu2O3:Tb

Luminescence properties of Lu₂O₃:Eu³⁺ and Lu₂O₃:Tb³⁺ nanocrystalline powders with the particle size varying from 46 to 6 nm were studied under excitation by synchrotron radiation in the photon energy range (up to ∼22.5 eV) covering the region where the processes of multiplication of electronic excitation occur. It was found that the excitation spectra of Tb³⁺ emission from all Lu₂O₃:Tb³⁺ nanopowders have similar behavior, whereas the shape of the excitation spectra of Eu³⁺ emission from Lu₂O₃:Eu³⁺ nanopowders strongly depends on the particle size. The difference in the behavior of Lu₂O₃:Eu³⁺ and Lu₂O₃:Tb³⁺ nanophosphor systems was explained by different mechanisms of the energy transfer from the host to Eu³⁺ or Tb³⁺ ions (either the hole or electron recombination mechanism, respectively), which are differently influenced by losses of electronic excitations near the particle surface.     

Synthesis of Fe3O4 nanocrystals using hydrothermal approach

Magnetite (Fe₃O₄) nanocrystals were synthesized using a facile hydrothermal method. FeCl₂, FeCl₃ and NaOH with a molar ratio of 1:2:8 were added into an autoclave and this was followed by heat treatment at elevated temperature (100, 150 and 200 °C). The produced results show that the average crystallite and the physical size of the resulting Fe₃O₄ nanocrystals increased with the hydrothermal temperature. The Fe₃O₄ nanocrystals exhibited superparamagnetic behavior. The saturation magnetization and coercivity of the produced nanocrystals also increased with the hydrothermal temperature.     

尺寸效应对Er3+掺杂纳米Y2O3的发光特性的影响

采用燃烧法制备了不同尺寸的Er³⁺掺杂Y₂O₃粉体材料,研究了尺寸效应对Er³⁺掺杂纳米Y₂O₃材料发光特性的影响.光声光谱显示,对于不同晶粒尺寸的样品,Er³⁺离子光声峰位置几乎保持不变.这表明小尺寸效应对稀土离子能级位置影响很小.对488nm激光激发下的发射谱的分析发现,随着样品颗粒尺寸的减小,4S_3/2能级和关键词： 3+离子')" href="#">Er³⁺离子 纳米 发光 能量传递     

Effect of Eu,Tb codoping on the luminescent properties of Y2O3 nanorods

Red-emitting Y₂O₃:Eu³⁺ and green-emitting Y₂O₃:Tb³⁺ and Y₂O₃:Eu³⁺, Tb³⁺ nanorods were synthesized by hydrothermal method. Their structure and micromorphology have been analyzed by X-ray powder diffraction (XRD) and transmission electron microscopy (TEM). The photoluminescence (PL) property of Y₂O₃:Eu³⁺,Tb³⁺ phosphor was investigated. In the same host (Y₂O₃), upon excitation with ultraviolet (UV) irradiation, it is shown that there are strong emissions at around 610 and 545 nm corresponding to the forced electric dipole ⁵D₀-⁷F₂ transition of Eu³⁺ and ⁵D₄-⁷F₅ transition of Tb³⁺, respectively. Different qualities of Eu³⁺and Tb³⁺ ions are induced into the Y₂O₃ lattice. From the excitation spectrum, we speculate that there exists energy transfer from Tb³⁺ to Eu³⁺ ions .The emission color of powders reveals regular change in the separation of light emission. These powders can meet with the request of optical display material for different colors or can be potentially used as labels for biological molecules.     

Decay dynamics of Eu/Tb in solution-processed Y2O3

As new synthesis techniques are developed to create phosphors with smaller particles the physical processes that govern luminescence behaviors, like efficiency and decay rates, are influenced by the large surface-to-volume ratios of the nano-structured materials. Decay of lanthanide excited states, following pulsed laser excitation, is used to probe the affect of size-induced decay channels on the luminescent properties. We report results on the decay dynamics of europium and terbium excited states in solution-produced yttrium oxide. Radiative decay from the Eu³⁺⁵D₀ state is found to be well described by a single exponential function over a range of concentrations (0.01-2.0%). The Tb³⁺⁵D₄ decay exhibits a distribution of decay rates over the concentration range 0.01-5.0%. The distribution of decay rates is discussed using a probability density function based on the Kohlrausch decay function.     

Dependence of Néel temperature on the particle size of MnFe2O4

Mn-ferrite nanoparticles having diameter in the range 17-45 nm were synthesized by modified co-precipitation method using metal nitrate solutions. Different concentrations of NaOH were found to affect the growth of particle size. Néel temperature (T_N) was found to increase with increasing particle size. The obtained Néel temperature was higher than that of the bulk. The shift in the Néel temperature is described by the finite size-scaling theory [T_N(d)−T_N(bulk)]/T_N(bulk)=(d/d₀)^−1/v, where d is particle size, v=0.6±0.1 and d₀=1.7±0.1 nm.     

Oxide coatings on Y3Al5O12:Tb particles

A coating method with precipitating process was developed to reduce the particle size and to improve the particle dispersion of Y₃Al₅O₁₂:Tb³⁺ phosphor prepared by sol-gel method. The particle morphology was observed by using SEM and TEM; and the particle size and its dispersion was measured by using laser scattering technique. Several coating materials were tested. Among them, Al₂(SiO₃)₃ coating not only reduced the particle size from several micrometers to ∼1 μm and improved the particle dispersion, but also well kept luminescent intensities and improved the duration of the phosphor under the bombardment of cathode ray. The mechanism of the particle size reduction was proposed.     

Eu/Tb ions co-doped white light luminescence Y2O3 phosphors

Y₂O₃:Eu³⁺, Tb³⁺ phosphors with white emission are prepared with different doping concentration of Eu³⁺ and Tb³⁺ ions and synthesizing temperatures from 750 to 950 °C by the co-precipitation method. The resulted phosphors were characterized by X-ray diffraction (XRD) and photoluminescence (PL) spectroscopy. The results of XRD indicate that the crystallinity of the synthesized samples increases with enhancing the firing temperature. The photoluminescence spectra indicate the Eu³⁺ and Tb³⁺ co-doped Y₂O₃ phosphors show five main emission peaks: three at 590, 611 and 629 nm originate from Eu³⁺ and two at 481 and 541 nm originate from Tb³⁺, under excitation of 250-320 nm irradition. The white light luminescence color could be changed by varying the excitation wavelength. Different concentrations of Eu³⁺ and Tb³⁺ ions were induced into the Y₂O₃ lattice and the energy transfer from Tb³⁺→Eu³⁺ ions in these phosphors was found. The Commission International de l’Eclairage (CIE) chromaticity shows that the Y₂O₃:Eu³⁺, Tb³⁺ phosphors can obtain an intense white emission.     

Synthesis and properties of colloidal ternary ZnGa2O4:Eu nanocrystals

A nonhydrolytic hot solution synthesis technique was used to grow monodisperse ternary oxide nanocrystals of ZnGa₂O₄:Eu³⁺. The shape of ZnGa₂O₄:Eu³⁺ nanocrystals was a function of the type of precursor, and their size was controlled by changing the concentration ratio of Zn precursor to surfactant. The crystal structure of synthesized ZnGa₂O₄ nanocrystals was a cubic spinel with no detectable secondary phases. Photoluminescence of red-emitting ZnGa₂O₄:Eu³⁺ nanocrystals resulted in a high (⁵D₀-⁷F₂)/(⁵D₀-⁷F₁) intensity ratio, suggesting that the Eu³⁺ ions occupy tetrahedral Zn²⁺ sites or distorted octahedral Ga³⁺ sites with no inversion symmetry in ZnGa₂O₄ nanocrystals.     

Ag+掺杂的立方相Y2O3:Eu纳米晶体粉末发光强度研究

采用化学自燃烧法制备了不同Ag⁺掺杂浓度的Y₂O₃:Eu纳米晶体粉末样品(［Y³⁺］∶［Eu³⁺］∶［Ag⁺］=99∶1∶X，X=0—3.5×10^-2)，以及通过退火处理得到了相应的体材料.根据X射线衍射谱确定所得纳米和体材料样品均为纯立方相.实验表明在纳米尺寸样品中随着Ag离子浓度的增加，荧光发射强度随之增加，当X=2×10^-2时达到最大值，其发光强度比X=0时提高了近50%.当Ag离子浓度继续增加，样品发光强度保持不变.在相应的体材料样品中则没有观察到此现象.通过对各样品的发射光谱，激发光谱，X射线衍射图谱，透射电镜(TEM)照片和荧光衰减曲线的研究，分析了引起纳米样品荧光强度变化的原因是由于Ag离子与表面悬键氧结合，从而使这一无辐射通道阻断，使发光中心Eu³⁺的量子效率提高；Ag⁺的引入所带来的另一个效应是使激发更为有效.这两方面原因使发光效率得到了提高.     

Silica-coated Y2O3:Eu nanoparticles and their luminescence properties

Crystalline Y₂O₃:Eu is of paramount significance in rare earth materials and research on luminescence spectra. In this work, the nanocrystalline Y₂O₃:Eu was coated with silica by a facile solid state reaction method at room temperature. The transmission electron microscope (TEM) photographs showed that the prepared Y₂O₃:Eu particle is polycrystalline with the size of 20 nm, the size of silica-coated particle is about 25 nm. The XPS spectra indicated that the silica layer is likely to interact with Y₂O₃:Eu by a Si-O-Y chemical bond. The luminescence spectra showed that the intensity of ground samples is lower than that of unground ones, the intensity of silica-coated phosphors is higher than that of the ground samples, while almost the same as that of the unground ones. Therefore, the silica coating decreases the surface defects of nanoparticles of the nanocrystalline Y₂O₃:Eu, thus increasing their luminescent intensity.     

The effects of Li on the near-infrared luminescence properties of Nd/ Li codoped Y2O3 nanocrystals

Nd³⁺/ Li⁺ codoped Y₂O₃ nanocrystals were synthesized by glycine combustion method. The codoping of Li⁺ ions can lead to about twice enhancement of the near-infrared luminescence for the three spectral regions, which correspond to the ⁴F_3/2 → ⁴I_9/2, ⁴F_3/2 → ⁴I_11/2 and ⁴F_3/2 → ⁴I_13/2 channels of Nd³⁺. The enhancement could be attributed to the improved morphology, the modification of the local symmetry around Nd³⁺ ions and the reducing number of OH⁻ groups by codoping with Li⁺ ions.     

Upconversion luminescence of colloidal solution of Y2O3 nano-particles doped with trivalent rare-earth ions

We have studied upconversion luminescence of colloidal solution of Y₂O₃ nano-particles codoped with 1 mol% Er³⁺ and 5 mol% Yb³⁺. Y₂O₃ nano-particles codoped with 1 mol% Er³⁺ and 5 mol% Yb³⁺ show sintering and agglomeration, because they are synthesized by firing a hydroxy carbonate precursor. Colloidal solution of Y₂O₃ nano-particles codoped with 1 mol% Er³⁺ and 5 mol% Yb³⁺ is prepared through two-step dispersion process and the average diameter of the primary nano-particles is about 50 nm. Under excitation with 980-nm laser diode, upconversion luminescence of colloidal solution of the primary Y₂O₃ nano-particles codoped with 1 mol% Er³⁺ and 5 mol% Yb³⁺ in methyl isobuthyl ketone strongly appeared near 660 nm and weakly near 550 nm.