共查询到20条相似文献,搜索用时 31 毫秒
1.
New X-ray methods have been developed for the determination of as little as 1 μg of fluorine or as little as 0.1 μg of sulfur. Fluorine as fluoride is precipitated as lanthanum fluoride in 75% ethanol-water mixture and determined by measuring the amount of lanthanum present in the precipitate. Sulfur as sulfate is precipitated as barium sulfate from a barium sulfate saturated 50% ethanol-buffer mixture, using selenate as a coprecipitant, and determined by measuring the amount of sulfur present. Sulfur as sulfide is precipitated as cadmium sulfide and determined by measuring the amount of sulfur or cadmium in the precipitate. 相似文献
2.
3.
4.
An experimental technique based on a modified vibrating orifice aerosol generator has been employed to study unsteady evaporation of linear streams of highly monodisperse binary microdroplets of volatile constituents over short time periods (i.e., <1 ms), such that the droplet composition remains nearly constant. The droplet size and temperature (i.e., refractive index) have been determined with high temporal resolution from the resonances observed in the simultaneous elastic and Raman light scattering spectra obtained by varying the droplet size through modulation of droplet generation frequency. By using this technique we show that thermodynamic parameters of binary systems, such as activity coefficients as well as vapor pressures of the constituents as functions of temperature, can be determined. We have applied the procedure to study unsteady evaporation rates of pure ethanol and methanol droplets as well as binary droplets containing various ratios of ethanol and methanol. We have obtained vapor pressures of ethanol and methanol as functions of temperature as well as activity coefficients of ethanol and methanol as functions of composition, and the results show excellent agreements with the values reported in the literature. The technique presented in this paper is applicable to any binary system containing at least one volatile constituent. Copyright 2000 Academic Press. 相似文献
5.
6.
聚吡咯的合成与新型双离子电池性能研究 总被引:10,自引:0,他引:10
用反相微乳聚合法制备了十二苯磺酸(DBSA)掺杂的导电聚吡咯纳米材料, DBSA既作为表面活性剂又作为掺杂剂, 能够提高聚吡咯的导电性. 用制备出的DBSA-PPy 为正极材料, 石墨为负极材料组装双离子电池, 测试结果表明, C/DBSA-PPy 电池的电化学性能已达到传统锂离子电池的水平, 这是因其具有较高的导电性和特殊掺杂结构的聚吡咯使其电化学性能得到优化. 相似文献
7.
The effect of shear rate on the radical polymerization of methyl methacrylate at 50°, in bulk as well as in solution, has been studied. The rate of polymerization increases by as much as 15% at high shear rates. This increase is explained in terms of changes in the initiator efficiency with shear rate. 相似文献
8.
Silver fenocyanide as well as Silver ferricyanide are converted into silver thiocyanate by treating with thiocyanate ions, while feirocyanide ions or ferricyanide ions are formed at the same time. Silver ferrocyanide as well as silver ferricyanide are dissolved by solutions of thiocynates of higher concentrations. 相似文献
9.
本文考察了不同制备方法、不同种类的光敏剂对以苯并三氮唑银为银源的光敏热成像材料感光性能的影响。结果显示原位法中以AgI和AgBrI为光敏剂的PTG材料具有较高的感光度,分别为以AgBr为光敏剂的参比样片感光度的16倍和2.4倍;异位法制备的PTG材料中,以AgBrI乳剂为光敏剂的感光度比以AgBr为光敏剂的感光度高,是其3倍;此外,同是以AgBr为光敏剂、用异位法制备的PTG材料的感光度比原位法制备的PTG材料感光度高。文中初步分析讨论了出现以上实验结果的原因。 相似文献
10.
Huck WT 《Chemical communications (Cambridge, England)》2005,(33):4143-4148
When organic materials are placed in environments which physically confine the materials at the nanometre scale, interfacial effects and confinement-induced loss of entropy can significantly alter materials' properties such as the glass transition temperature as well as the nanoscale morphology as compared to a "free" system. In block copolymers, nanoconfinement leads to a range of unusual self-organized nanoscale morphologies. In this article, attempts to induce nanoconfinement effects in new polymer systems as well as at interfaces will be highlighted and some possible future implications for organic synthesis and biology will be discussed. 相似文献
11.
Vázquez E Dewitt DM Hammond PT Lynn DM 《Journal of the American Chemical Society》2002,124(47):13992-13993
Hydrolytically degradable, multilayered films ranging from 10 to 100 nm have been constructed by the layer-by-layer deposition of degradable polycations and oppositely charged polyanions. Polycations play dual roles in these systems, serving as structural components of the film as well as transient elements designed to trigger release; polyanions serve as structural components and as entities to be released or delivered. The films erode in a controlled manner under physiological conditions and are suitable for the incorporation and subsequent controlled release of functional polyanions such as DNA. 相似文献
12.
《Electroanalysis》2006,18(2):131-140
Reduction of carbonyl group in aldehydes and ketones, as well as oxidation of numerous aldehydes is discussed, as well as those reductions of organic compounds where the C?O group activates cleavage of an adjacent C? X bond where X is a good leaving group like halogen, OH, NH2 or SR or activates hydrogenation of an adjacent C?C group. Survey involves aliphatic and aromatic aldehydes, aryl alkyl and diaryl ketones, as well as α‐ketoacids, 1,2‐diketones and compounds where the carbonyl group is a part of a ring. The role of acid–base, hydration–dehydration and in some cases keto–enol equilibria on electrochemical behavior is pointed out, as well as the role of buffer kind and concentration and the nature of the cation of supporting electrolyte. Better understanding of these factors promises finding of best conditions for electroanalytical procedures. 相似文献
13.
14.
Smelaya Z. V. Matkovskaya L. A. Goltsov Yu. G. 《Journal of Thermal Analysis and Calorimetry》2000,62(2):443-450
Supramolecular structures of lecithin occurred to be the template in the synthesis of mesoporous aluminosilicates; using of various combinations of lecithin and cetyltrimethyl-ammonium bromide or octadecylamine as templating agents allowed to obtain mesoporous substances with pores up to 100 Å, as well as biporous materials in aluminosilicate system. In the presence of glucose oxidase and cetyltrimethyl-ammonium bromide combinations aluminosilicate substances with complex porous structure were shown to be formed (pore size distributions exhibited 3 peaks, corresponding 3 effective size of mesopores in the 30–100 Å range). The investigation of sorption of glucose oxidase on obtained aluminosilicate mesoporous substances was carried out, the results obtained allowus to consider such materials as prospect for creation high capable and selective sorbents for biomolecules sorption, as well as active elements of chemical and biosensors. 相似文献
15.
以丙烯酸、丙烯酸丁酯和甲基丙烯酸甲酯为单体,采用自由基聚合法制备了聚丙烯酸卷材涂料前驱成膜物,获得了适宜的制备工艺条件。研究表明,以三元共聚体系聚合产物为根本,以氨基树脂为交联剂,三乙胺为中和剂,可制备令人满意的水溶性聚丙烯酸卷材涂料前驱成膜物,为开发水溶性聚丙烯酸卷材涂料提供了基础数据。 相似文献
16.
Further analysis of delayed luminescence of plants 总被引:7,自引:0,他引:7
Yan Y Popp FA Sigrist S Schlesinger D Dolf A Yan Z Cohen S Chotia A 《Journal of photochemistry and photobiology. B, Biology》2005,78(3):235-244
The delayed luminescence curves of biological tissues, in particular the "hyperbolic" oscillations of the form exp(-iln (1 + lambda t)) with t as the time and lambda as a constant, were subjects of further experimental and theoretical investigations. It turned out that the oscillations are solutions of a Hamiltonian that keeps coherent states coherent. In agreement to the expectations the oscillations disappear as soon as the biological system looses its integrity or its collective structure. The photocount statistics (PCS) confirms these results. The illumination itself influences the biological state under consideration. The temperature dependence displays small deviations from the Arrhenius-law with a mean activation energy of about 0.5 eV in case of plants. The results may be useful for investigating supermolecular interactions as well as for assessing the quality or quality changes of biological tissues. 相似文献
17.
以氨基化修饰的SiO_2为内核,人工合成色素赤藓红为模板,甲醇/水为溶剂,4-乙烯基吡啶为功能单体,二甲基丙烯酸乙二醇酯为交联剂,偶氮二异丁腈为引发剂,采用表面印迹技术,制备核-壳型赤藓红分子印迹聚合物。通过红外光谱对其结构进行表征,并通过动力学吸附、等温饱和吸附和实际样品加标实验对其吸附性能进行评价。结果表明,核-壳型赤藓红分子印迹聚合物具有较快的吸附能力,在15min左右达到吸附平衡,有较好的吸附容量,能够从复杂的食品样品中选择性吸附模板,且回收可达85%。 相似文献
18.
WU Ren-Ping YU Yan GU Ying Yun GUO Jin-Yu 《结构化学》2007,26(5):562-566
Deep color glass-ceramics is prepared by using gold tailings as the main raw material, and Cr2O3 is added as nucleation agent. Influence of different Cr2O3 additions on crystallization structure and properties of CaO-MgO-Al2O3-SiO2 glass-ceramics has been discussed so as to select optimum additions. DTA is employed to determine optimum crystallization and nucleation temperatures; XRD and SEM are used to characterize microstructure of each sample; and performance indexes, such as water absorption, bulk density, flexural strength and so on, are also determined. Experimental results show that when 3wt% Cr2O3 is introduced, fine glass-ceramics with diopside as the main crystal and Ca-Fe diopside as the second-crystal is obtained, and its corresponding performance indexes are as follows: water absorption 0.12%, bulk density 2.56 g/cm3, and flexural strength 70.01 Mpa. 相似文献
19.
Baber AE Jensen SC Iski EV Sykes EC 《Journal of the American Chemical Society》2006,128(48):15384-15385
We describe how the presence of styrene, a weakly adsorbed molecule, dramatically restructures the Au{111} surface at temperatures as low as 80 K. The restructuring manifests itself both in mobility of step-edge atoms, as well as changes in the position of the herringbone reconstruction over time. These effects are explained in terms of the preferential adsorption sites of styrene allowing it to assist in atom detachment from step edges, as well as lowering of the energetic barrier for movement of the herringbone reconstruction. This work has important consequences for studies in which Au is used as a support for or as an electrical contact to molecules. 相似文献
20.