Synthesis of (C8H11N)2·Zn(OAc)2, (C8H11N)2·Cu(OAc)2, and (C8H11N)2·CuCl2 complexes and application to the Henry reaction

(C₈H₁₁N)₂·Zn(OAc)₂ (1a), (C₈H₁₁N)₂·Cu(OAc)₂ (1b), and (C₈H₁₁N)₂·CuCl₂ complexes are synthesized by a simple one-pot method. The crystal structures of 1a, 1b, and 1c are determined by X-ray crystallography. The complexes are also characterized by NMR, IR, MS, and elemental analysis and used as the catalysts applied to the Henry reaction; moderate to high yields are obtained at room temperature.     

Study of the solubility of components in the NaClO3 · 2CO(NH2)2-NH2C2H4OH · CH3COOH-H2O system

The solubility of components in the NaClO₃ · 2CO(NH₂)₂-NH₂C₂H₄OH · CH₃COOH-H₂O system was studied by the visual polythermal method over wide temperature and concentration ranges. In the phase diagram, crystallization fields were determined for ice, urea, diurea sodium chlorate, acetic acid, monoethanolamine acetate, and the compound CO(NH₂)₂ · NH₂C₂H₄OH · CH₃COOH. The compound was identified by chemical, thermogravimetric, and X-ray powder diffraction analyses.     

Crystal structure of [MnII (1,10-C12H8N2)3]2+[(B9C2H11)CoIII(B8C2H10)CoIII(B9C2H11)]2?·CH3CN

A novel compound, [MnPhen₃][(B₉C₂H₁₁)Co(B₈C₂H₁₀)Co(B₉C₂H₁₁)]· CH₃CN (Phen = 1,10-phenantroline), comprising a Co(III) dicobaltacarborane cluster anion has been prepared and characterized by single crystal X-ray diffraction. Crystal data are the following: C₄₄H₅₉B₂₆N₇Co₂Mn, M = 1139.84, triclinic, space group , unit cell parameters: a = 13.2465(11) Å, b = 14.521(2) Å, c = 15.2536(15) Å; α = 77.027(9)°, β = 88.500(8)°, γ = 77.274(9)°; V = 2788.5(5) ų, Z = 2, d _calc = 1.358 g/cm³, T = 295 K, F(000) = 1162, μ = 0.853 mm⁻¹. The structure was solved by the direct and Fourier methods and refined anisotropically (isotropically for hydrogen atoms) using the full-matrix technique to final factors R ₁ = 0.0374, wR ₂ = 0.0915 for 7397 I _hkl ≥2σ_I of 9779 I _hkl measured (diffractometer Enraf-Nonius CAD-4, λMoK _α , graphite monochromator, θ/2θ-scanning). The structure is formed from [MnPhen₃]²⁺ cations, [(B₉C₂H₁₁)×Co(B₈C₂H₁₀)Co(B₉C₂H₁₁)]₂₋ anions, and acetonitrile molecules CH₃CN. Central Mn atom in the cation has a distorted octahedral coordination environment formed by six nitrogen atoms of three bi-dentate Phen ligands, average Mn-N bond length being 2.263(2) Å. The anion has a chain-like structure built from three icosahedra sharing common vertices occupied by the cobalt atoms. The central icosahedron including ten light atoms (8B, 2C) provides two vertices for the cobalt atoms shared with the other icosahedra having 11 light atoms (9B, 2C). The arrangement of-C₂-groups in the anion corresponds to a quasi-gauche-configuration of asymmetric sandwich complexes of both cobalt atoms. Original Russian Text Copyright ? 2005 by T. M. Polyanskaya, V. V. Volkov, and M. K. Drozdova __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 46, No. 4, pp.730–740, July–August, 2005.     

Eu2+掺杂MgY2Al3Si2O11N青光荧光粉的制备和发光性能

采用高温固相法合成了一系列Eu²⁺掺杂的MgY²Al³Si²O¹¹N(MYASON)青光荧光粉。详细探讨了不同制备方法对荧光粉的物相结构和发光强度的影响,利用X射线衍射精修和X射线光电子能谱实验证明Si⁴⁺-N^3-离子对成功掺入石榴石晶格中。通过荧光光谱、寿命衰减曲线和变温光谱研究了发光性能,研究结果表明,用365 nm紫外光激发MYASON∶Eu²⁺荧光粉时,在青光区域呈现不对称宽带发射,峰值为490 nm,可以为紫外芯片激发的白光发光二极管有效提供青光成分。     

Eu2+掺杂MgY2Al3Si2O11N青光荧光粉的制备和发光性能

采用高温固相法合成了一系列Eu²⁺掺杂的Mg Y₂Al₃Si₂O₁₁N(MYASON)青光荧光粉。详细探讨了不同制备方法对荧光粉的物相结构和发光强度的影响,利用X射线衍射精修和X射线光电子能谱实验证明Si⁴⁺-N^3-离子对成功掺入石榴石晶格中。通过荧光光谱、寿命衰减曲线和变温光谱研究了发光性能,研究结果表明,用365 nm紫外光激发MYASON∶Eu²⁺荧光粉时,在青光区域呈现不对称宽带发射,峰值为490 nm,可以为紫外芯片激发的白光发光二极管有效提供青光成分。     

Study of Dehydrocoupling Reactions of Diorganotin Dihydrides R1R2SnH2 with Biuret

phenylmethyltin dihydride (PhMeSnH₂), phenylethyltin dihydride (PhEtSnH₂), phenylbutyltin dihydride (PhBuSnH₂) and butylmethyltin dihydride (BuMeSnH₂) with biuret (H₂L) proceeds via SnH/NH dehydrocoupling to afford the corresponding tetra-coordinate cyclic products. The reactions in the molar ratios of 1∶1, 2∶1 and 1∶2 have been studied. The yellow derivatives so isolated were soluble in polar solvents and insoluble in nonpolar solvents. It was found that 1∶1 reaction went to completion while 2∶1 and 1∶2 did not go to completion. The derivatives had been characterized by elemental analysis and spectroscopic techniques viz. IR, ¹H NMR, ¹³C NMR, ¹¹⁹Sn NMR. DSC and TGA of the reaction products have also been studied. All the derivatives were thermally stable upto (190±10) ℃ and degradation occurred after that.     

Co[(C6H11O)2PS2]2·2Py的合成和晶体结构

Oxidation process of Co[(C₆H₁₁O)₂PS₂]₂ and substitute-reduction reaction of Co[(C₆H₁₁O)₂PS₂]₃ with pyridine have been studied by spectrophotometric methods, respectively. The equilibrium constant was found to be K=0.63±0.02(mol·dm^-3)^-3. The crystal structure of Co[(C₆H₁₁O)₂PS₂]₂·2Py has been determined by X-ray diff- raction method. The crystal belongs to triclinic system, space group P1, with cell parameters: a=6.944(2)?,b=9.277(3)?,c=15.981(6)?,α=91.79(3)°,β=99.55(3)°,γ=94.44(3)°,V=1011.2(6)?³,Z=2,M_r=803.94,D_c=1.320Mg·m^-3,F(000)=425,μ=0.747mm^-1,final R=0.0700 and wR=0.1988 for 3626 re-flections with I≥2σ(I). The cobalt atom in the title complex has a octahedral geometry with four Co-S bonds and two Co-N bonds. The central atom P is tetrahedrally surrounded by two sulphur atoms and two oxygen atoms in the dicyclohexyldithiophosphate ligand. The six carbon atoms of cyclohexyl take the chair conformation.     

Rotational Analysis of A2Πu-X2Σ+g System of 14N2+

The absorption spectrum of N₂⁺ has been studied using optical-heterodyne velocity mod-ulation spectroscopy in the near-infrared region. The observed spectral lines were assigned to the (3,1), (4,2), (5,3), (8,5) bands of the A²Π_u-X²Σ⁺_g system and the line lists were provided. The (5,3) band was studied for the first time. Fourteen rotational-resolved bands in literatures were fitted together with our observed bands and the molecular constants were obtained for υ_A=0-9 and υ_X=0-5.     

Effect of the Nature of Second-Sphere Cation on the Architecture of Crystalline π-Complexes Ca[CuCl2(HOCH2C≡CCH2OH)]2.4H2O and (C7H5N2H2)[CuCl2(HOCH2C≡CCH2OH)]

In the MCl-CuCl-HOCH₂C≡CCH₂OH (M = Ca, C₇H₅N₂H₊²) system, the crystals of two anionic Ca[CuCl₂(HOCH₂C≡CCH₂OH)]₂-4H₂O (1) and (BimH)[CuCl₂(HOCH₂C≡CCH₂OH)] (2) (BimH⁺ is cation of benzimidazole-C₇H₅N₂H₊²) π-complexes are obtained and studied by single crystal X-ray diffraction Crystals of 1 are monoclinic: C2/c space group, a = 8.323(3) ?, b = 13.283(4) ?, c = 16.741(5) ?, β = 92.35(3)°, V = 1849.3(10) ?³, Z = 4; crystals of 2 are triclinic: P1 space group, a = 6.901(3) ?, b = 9.898(4)?, c = 9.987(4) ?, α = 94.91(3)°, β = 93.91(3)°, γ = 107.59(4)°, V = 644.7(5) ?³, Z = 2. Complex 1 consists of infinite bimetallic chains [Ca(H₂O)₄CuCl₂(HOCH₂C≡CCH₂OH)₂]_∞ forming a three-dimensional framework through (Ow)HCl and (C)O-HCl hydrogen bonds. Compound 2 is built from discrete anions [CuCl₂(HOCH₂C≡CCH₂OH)]^- paired by edge-to-edge packing in the [100] direction and large BimH⁺ cations with face-to-face packing. In both structures, the π-coordinated Cu(I) atom has the trigonal environment involving two Cl^- anions and C≡C 2-butyne-1,4-diol bond (Cu-(C≡C) distance is 1.918(2) ? and 1.910(4) ? for 1 and 2 respectively).     

Hydrogenation of 2-ethylanthraquinone over Pd/Zro2-γ-Al2O3 catalyst

A ZrO₂-γ-Al₂O₃ supported Pd catalyst was prepared and characterized by XRD, XPS, H₂-TPR and TEM techniques. The catalytic activity was evaluated in the liquid-phase hydrogenation of 2-ethylanthraquinone. Comparing with Pd/γ-Al₂O₃, it showed high catalytic activity.     

Oxidative coupling of methane over Bi2O3?P2O5?K2O/Sm2O3

Oxidative coupling of methane over Bi₂O₃–P₂O₅–K₂O/Sm₂O₃ takes place giving more C₂H₄ as compared to C₂H₆. Sm₂O₃ supported Bi–P–K is a more active and selective catalyst, than TiO₂, -Al₂O₃, SiO₂ and MgO supported catalysts.

---

Bi₂O₃–P₂O₅–K₂O/Sm₂O₃ , . Bi–P–K, Sm₂O₃, , TiO₂, -Al₂O₃, SiO₂, MgO.

     

Reaction of tetrahydrofuran with H2S in the presence of Na+/γ-Al2O3

Modification of -Al₂O₃ by sodium hydroxide promotes the increase of surface basicity but does not exert a strong effect on catalytic activity in the reaction of thiolane production from tetrahydrofuran and H₂S. Introduction of NaOH to -Al₂O₃ in small concentration increases the number of Lewis acid centers but decreases their strength. The activity of Na/-Al₂O₃ referred to one Lewis acid center drops.     

介孔结构K8SiMo11O39·2H2O/TiO2的合成及光催化性能研究

采用浸渍法制备K8SiMo11O39·2H2O/TiO2复合材料。用IR、XRD、TG-DTA等方法进行了表征。用N2吸附-脱附等温线考察了催化剂的比表面、孔径,表明产物为介孔材料。以标题化合物作为光催化剂催化降解甲基橙,探讨催化剂用量、甲基橙的初始浓度、过氧化氢的用量等条件对甲基橙脱色率的影响,结果表明:催化剂加入量为80 mg·L-1、甲基橙的初始浓度为10 mg·L-1,H2O2的用量为10 mL·L-1时,脱色率达到92%。     

Dehydrogenation of Isobutane Over V2O5/γ-Al2O3 Catalyst

The effect of the type of the support and the amount of V₂O₅ loading on the activity of V₂O₅/γ-Al₂O₃ catalyst for the dehydrogenation of isobutane have been investigated. Based on the experimental results of TPR, XRD and ESR spectroscopy, it is suggested that there are strong interactions between vanadia and carrier and that the V⁴⁺ species on the surface is the active site of V₂O₅/γ-Al₂O₃ for this reaction. This revised version was published online in June 2006 with corrections to the Cover Date.     

Theoretical study of the energies and activation barriers of elementary reactions of hydrogenation of the Ti-doped closo-aluminide cluster Al@TiAl11 and its anion Al@TiAl 11?

The potential energy surfaces, energies E, and activation barriers h of elementary reactions of addition of an H₂ molecule to the Ti-doped closo-aluminide cluster Al@TiAl₁₁ and its anion Al@Ti₁₁⁻ with an icosahedral and marquee structure in the states with different multiplicity were calculated within the B3LYP approximation of the density functional theory using the 6–31G* and 6–311+G* basis sets. The results were compared with the data calculated at the same level of theory for the related reactions of hydrogenation of bare closo-aluminides Al₁₃ and Al₁₃⁻ and their B-, C-, Si-, and Ge-doped derivatives. The computations demonstrated that, depending on the structure, charge, and multiplicity of the Al@TiAl₁₁ cluster, the hydrogenation energy varies in the range 15–23 kcal/mol. At the first stage of addition (chemisorption) of H₂, a μ-H₂ complex at the Ti atom (intermediate) forms with the distance R(Ti-H₂) ∼ 1.9–2.0 ?, which is accompanied by an energy decrease of ∼4–10 kcal/mol. The H-H bond in the μ-H₂ complex is ∼0.1 ? longer and the stretching vibration frequency V_val(HH) is ∼700–1500 cm⁻¹ (or more) lower than the corresponding characteristics of the isolated H₂ molecule. In the transition state with an imaginary frequency of ∼600i–1100i, the H₂ molecule is coordinated to the attacked edge Ti-Al_r, and its length increases to ∼0.9–1.1 ?. The activation barrier height h varies from a few kcal/mol to ∼8–10 kcal/mol when measured from the μ-H₂ complex and is within 18–22 kcal/mol when measured from the product (dihydride Al@TiAl₁₁H₂). The latter barrier (to the reverse reaction of dehydrogenation) is considerably higher than the barriers to migration of hydrogen atoms around the metal cage in the Al@TiAl₁₁H₂ dehydrides. There is a correlation between the energies E and barriers h of hydrogenation reactions and the structure, external charge, and multiplicity of the Al@TiAl₁₁ cluster. In all cases, the hydrogenation should occur significantly more readily than dehydrogenation. It was shown that these reactions can be both irreversible (for example, for an icosahedron in the singlet state) and reversible (for a marquee in the triplet state and others). The conclusion was drawn that the elementary reactions of hydrogenation and dehydrogenation for Ti-doped aluminides should occur considerably faster and under milder conditions than for bare aluminides or their analogues doped with main-group atoms. Original Russian Text ? V.K. Charkin, O.P. Kochnev, N.M. Klimenko, 2009, published in Zhurnal Neorganicheskoi Khimii, 2009, Vol. 54, No. 8, pp. 1345–1354.     

Kinetic simulation of oxidative dehydrogenation of n-butenes over SnO2?Sb2O4 catalysts

A previously suggested reaction mechanism was utilized to evaluate a kinetic model for the oxidation of n-butenes over ShSb=31 mixed oxide catalyst. With this model, kinetic curves measured at 673 K were simulated, illustrating the changes of amounts of undetectable surface components, too.

---

- SnSb=31 . , 673 K, .

     

Titanocene-based group-11 metal ions; solid-state structure of {[(η-C5H4SiMe3)2Ti(CCPh)2]2Ag}NO3

The reaction of [Ti](CCR)₂ {[Ti] = (η⁵-C₅H₄SiMe₃)₂Ti; 1a, R = Fc, Fc = (η⁵-C₅H₄)Fe(η⁵-C₅H₅); 1b, R = Ph} with MX {2a, MX = [Cu(NCCH₃)₄]BF₄; M = Ag; 2b, X = ClO₄; 2c, X = NO₃} in a 2:1 molar ratio produces the trinuclear heterobimetallic (Ti₂M) or heptanuclear heterotrimetallic (Ti₂MFe₄) complexes [{[Ti](μ-σ,π-CCR)₂}₂M]X (R = Fc: 3a, M = Cu, X = BF₄; 3b, M = Ag, X = ClO₄. R = Ph: 3c, M = Cu, X = BF₄; 3d, M = Ag, X = ClO₄: 3e, M = Ag, X = NO₃) in high yield. Complexes 3c-3e are also accessible, when {[Ti](μ-σ,π-CCPh)₂}MX (M = Cu: 4a, X = FBF₃; M = Ag: 4b, X = OClO₃; 4c, X = ONO₂) is reacted with one equivalent of 1b. Transferring this reaction scheme to [Ti](CCSiMe₃)₂ (1c) only the formation of the heterobimetallic tweezer complex {[Ti](μ-σ,π-CCSiMe₃)₂}MX {4d, MX = [Cu(NCCH₃)]BF₄; 4e, MX = AgOClO₃} is observed which is attributed to the bulkiness of the acetylide-bound Me₃Si group. The solid-state structure of 3e is reported. In 3e, two [Ti](CCPh)₂ tweezer moieties are chelate-bound by their carbon-carbon triple bonds to a silver(I) ion, resulting in a pseudo-tetrahedral environment at the group-11 metal. is acting as counter-ion to cationic [{[Ti](CCPh)₂}₂Ag]⁺.Additionally, the result of cyclic voltammetric studies on [{[Ti](μ-σ,π-CCPh)₂}₂Cu]BF₄ (3c) is reported.     

Solid solubility of Yb2Si2O7 in β-, γ- and δ-Y2Si2O7

This paper examines the structural changes with temperature and composition in the Yb₂Si₂O₇-Y₂Si₂O₇ system; members of this system are expected to form in the intergranular region of Si₃N₄ and SiC structural ceramics when sintered with the aid of Yb₂O₃ and Y₂O₃ mixtures. A set of different compositions have been synthesised using the sol-gel method to obtain a xerogel, which has been calcined at temperatures between 1300 and 1650 °C during different times. Isotherms at 1300 and 1600 °C have been analysed in detail to evaluate the solid solubility of Yb₂Si₂O₇ in β-Y₂Si₂O₇ and γ-Y₂Si₂O₇. Although Yb₂Si₂O₇ shows a unique stable polymorph (β), Yb³⁺ is able to replace Y³⁺ in γ-Y₂Si₂O₇ and δ-Y₂Si₂O₇ at high temperatures and low Yb contents. IR results confirm the total solid solubility in the system and suggest a constant SiOSi angle of 180° in the Si₂O₇ unit across the system. The temperature-composition diagram of the system, obtained from powder XRD data, is dominated by the β-RE₂Si₂O₇ polymorph, with γ-RE₂Si₂O₇ and δ-RE₂Si₂O₇ showing reduced stability fields. The diagram is in accordance with Felsche's diagram if average ionic radii are assumed for the members of the solid solution at any temperature, as long as the β-γ phase boundary is slightly shifted towards higher radii.     

Hydroisomerization of benzene-containing gasoline fractions on a Pt/SO 42? -ZrO2-Al2O3 catalyst: I. Effect of chemical composition on the phase state and texture characteristics of SO 42? -ZrO2-Al2O3 supports

A series of SO₄²⁻-ZrO₂-Al₂O₃ oxide supports containing from 18.8 to 89.1 wt % alumina was prepared by mixing sulfated zirconia hydrate (weight ratio ZrO₂: H₂SO₄ = 9 : 1) and pseudoboehmite followed by calcination at 650°C. For the subsequent use of the supports to optimize the acid and hydrogenating properties of bifunctional hydroisomerization catalysts of the Pt/SO₄²⁻-ZrO₂-Al₂O₃ type, the formation of these catalysts in the course of thermal treatment and their texture characteristics and phase composition were studied. It was found by chemical and thermogravimetric analysis that the addition of pseudoboehmite to sulfated zirconia hydrate resulted in a decrease in sulfur losses in the course of support production from 55.0 to 2.0% with respect to its nominal amount. As the alumina content was increased from 18.8 to 89.1 wt %, the specific surface area and the pore volume of the support increased nonadditively with respect to mechanical mixtures of sulfated zirconia and γ-alumina (from 155 to 197 m²/g and from 0.24 to 0.52 cm³/g, respectively); in this case, a maximum deviation was 18–21%. The experimental results can be explained by chemical interactions between the initial components of the supports. The results of thermogravimetric and X-ray diffraction analysis suggest that the reaction products are sulfated alumina and a sulfated ZrO₂-Al₂O₃ solid solution.