Magnetic,electronic and structural properties of ZnxFe3−xO4

A series of samples Zn_xFe_3−xO₄ have been prepared by the chemical coprecipitation technique and characterized by X-ray diffraction (XRD), vibrating sample magnetometry (VSM) and X-ray photoelectron spectroscopy (XPS). XRD demonstrates all the samples of Zn_xFe_3−xO₄ have a spinel structure same as Fe₃O₄. The magnetic hysteresis loops of Zn_xFe_3−xO₄ obtained from VSM indicate that the saturation magnetization has a maximum when x is ∼1/3. The chemical states of Fe atoms and Zn atoms in zinc ferrites have been measured using XPS and Auger electron spectroscopy (AES). The Fe 2p core-level XPS spectra and Zn L₃M₄₅M₄₅ Auger peaks have been analyzed and the results have been discussed in correlation with the samples’ magnetic properties. These results suggest most of Zn atoms occupy the tetrahedral sites and a small amount of them occupy the octahedral sites.     

Magnetic properties of metallic glasses of the type Fe80−x Pd x B20 and Fe80−x Pt x B20

Amorphous alloys of the type Fe_80???xPd_xB₂₀ and type Fe_80???xPt_xB₂₀ for 0?≤?x?≤?50 have been investigated by means of ⁵⁷Fe Mössbauer spectroscopy and magnetisation measurements in temperatures from 4.2 up to 300 K. Curie temperatures and crystallisation temperatures are found by DTMG-DTA method. Mössbauer spectroscopy magnetic field is observed to visible increase for x?=?1 and 1.5% at room temperature for Pd, while a decrease is observed for higher x values. Curie temperature for Pd alloys has a maximum at x?=?4 with T _C?=?753 K, which supports enforcing influence of Pd at low concentrations of Pd for magnetic interactions. We discuss different explanations for these measurements and compare with other findings for high Pd concentrations and alloys with Pt instead of Pd.     

Heat treatment effects on spinel phase of Zn x Ni1 − x Fe2O4 and MnFe2O4 nanoferrites

We report the effects of heat treatment on Zn _x Ni_1???x Fe₂O₄ (x?= 0, 0.5 and 1.0) and MnFe₂O₄ ferrite nanoparticles. The as-prepared compounds were sintered from 400°C to 1100°C. Pure ZnFe₂O₄ (x?= 1.0) and MnFe₂O₄ could be obtained under low reaction temperature of 200°C. NiFe₂O₄ (x?= 0) and Zn_0.5Ni_0.5Fe₂O₄ (x?= 0.5) nanoferrites crystallized with single phase cubic spinel structure after annealing at 600°C. The single phase cubic spinel structure of these compounds was destroyed after annealing at temperature above 700°C. The magnetization measurements indicate superparamagnetic behavior of the nanosized compounds produced.     

Synthesis and characterization of Ni-Zn ferrite nanoparticles

Nickel zinc ferrite nanoparticles Ni_xZn_1−xFe₂O₄ (x=0.1, 0.3, 0.5) have been synthesized by a chemical co-precipitation method. The samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, electron paramagnetic resonance, dc magnetization and ac susceptibility measurements. The X-ray diffraction patterns confirm the synthesis of single crystalline Ni_xZn_1−xFe₂O₄ nanoparticles. The lattice parameter decreases with increase in Ni content resulting in a reduction in lattice strain. Similarly crystallite size increases with the concentration of Ni. The magnetic measurements show the superparamagnetic nature of the samples for x=0.1 and 0.3 whereas for x=0.5 the material is ferromagnetic. The saturation magnetization is 23.95 emu/g and increases with increase in Ni content. The superparamagnetic nature of the samples is supported by the EPR and ac susceptibility measurement studies. The blocking temperature increases with Ni concentration. The increase in blocking temperature is explained by the redistribution of the cations on tetrahedral (A) and octahedral (B) sites.     

Magnetic susceptibility studies of Zn1−xFexSe and Zn1−xFexS

The magnetic susceptibility of diluted magnetic semiconductors Zn_1−xFe_xSe and Zn_1−xFe_xS has been calculated within a crystal field model and by applying the extended nearest-neighbour pair approximation. The results are compared with available experimental data. It appears that a good agreement between theory and experiment is obtained for Zn_1−xFe_xSe taking the long-range exchange comprising several nearer interionic distances, whereas in Zn_1−xFe_xS the exchange interaction with nearest-neighbours alone gives a better solution.     

Magnetic and Mössbauer studies on nanocrystalline Co1−x Li x Fe2O4 (x = 0, 0.2)

Ultrafine particles of Co_1???x Li _x Fe₂O₄ (x?= 0, 0.2) samples are prepared by glycine–nitrate combustion route. X-ray diffraction and transmission electron microscopy studies show that the samples have cubic spinel structure and average crystallite sizes of x?= 0 and 0.2 are 36 and 44 nm respectively. Vibrating sample magnetometer studies revealed the ferromagnetic nature of the samples. Li-doped CoFe₂O₄ sample showed higher values of coercive field, remanent magnetization and saturation magnetization compared to pure CoF₂O₄ indicating the enhancement of magnetic interactions. Mössbauer spectra at 77 K exhibited two broad sextets indicating that Fe^3?+? ions occupy both tetrahedral and octahedral sites. From these studies, it is concluded that Co_1???x Li _x Fe₂O₄ (x?= 0, 0.2) samples exhibit an inverse spinel structure. At room temperature, two sextets are superimposed on a very broad non-Lorentzian background indicating the presence of superparamgnetic fraction in agreement with the microscopic observations.     

Mössbauer effect studies on mixed lithium–zinc ferrites prepared by solution combustion method

Mössbauer effect studies have been made on lithium ferrites of varying compositions i.e. Li_0.5???x/2Zn _x Mn_0.05Fe_2.45???x/2O₄ prepared by combustion method from stoichiometric aqueous solutions of metal nitrates and oxalyl dihydrazide. In these compositions x varies from 0→0.5 in steps of 0.1. The Mössbauer spectral studies reveal that substitution of nonmagnetic Zn^2?+? is responsible for successive increase in line-width and change in hyperfine fields at A and B sites. The combustion method is rapid and may approach direct conversion from the molecular mixture of precursor solution to the fine particles of oxide product. The process involves highly exothermic redox reaction between metal nitrates and oxalyl dihydrazide solutions.     

Decrease of superparamagnetic fraction at room temperature in ultrafine CoFe2O4 particles by Ag doping

Co_1???x Ag _x Fe₂O₄ nanoparticles have been prepared by the combustion route. The average crystallite sizes for compositions with x = 0 and 0.2 are found to be 36 and 33 nm respectively from the XRD line broadening. Compared to the pure CoFe₂O₄, Ag-doping reduces the intrinsic magnetization values (M, M _r), but enhances coercivity (H _c). Mössbauer spectra show two sextets, indicating occupancies of tetrahedral and octahedral sites by Fe^3?+?. Hyperfine fields of 505 and 477 kOe in pure CoFe₂O₄ have been found for octahedral and tetrahedral sites respectively at liquid nitrogen temperature. The hyperfine field decreases with Ag-doping which also corroborates the magnetization studies. EPR study confirms the room temperature ferromagnetic behavior for Co_1???x Ag _x Fe₂O₄ (x = 0.2). The room temperature Mössbauer studies on x?=?0.0 and 0.2 show the ferromagnetic sextets (95%) along with superparamagnetic doublet (5%). However, x = 0.6 sample shows the ferromagnetic sextets only at room temperature. Highly Ag doped samples could be useful for the fabrication of the high-density magnetic materials as well as magnetic drug delivery.     

Magnetoresistive properties of Zn1−xCoxFe2O4 ferrites

The magnetic and magnetoresistive properties of spinel-type Zn_1−xCo_xFe₂O₄ (x=0, 0.2 and 0.4) ferrites are extensively investigated in this study. A large negative magnetoresistance (MR) effect is observed in Zn_1−xCo_xFe₂O₄ ferrites of spinel structure. These materials are either ferrimagnetic or paramagnetic at room temperature, and show a spin-(cluster) glass transition at low temperatures, depending on the chemical compositions. The MR curves as a function of magnetic fields, MR(H), are parabolic at all temperatures for paramagnetic polycrystalline ZnFe₂O₄. The MR for ZnFe₂O₄ at 110 K in the presence of 9 T applied magnetic field is 30%. On the other hand, MR(H) are linear for x=0.2 and 0.4 ferrimagnetic Zn_1−xCo_xFe₂O₄ samples up to 9 T. The MR effect is independent of the sintering temperatures, and can be explained with the help of the spin-dependent scattering and the Yafet–Kittel angle of Zn_1−xCo_xFe₂O₄ mixed ferrites.     

Study of magnetic and structural properties of ferrofluids based on cobalt-zinc ferrite nanoparticles

Ferrofluids are colloidal systems composed of a single domain of magnetic nanoparticles with a mean diameter around 30 nm, dispersed in a liquid carrier. Magnetic Co_(1−x)Zn_xFe₂O₄ (x=0.25, 0.50, 0.75) ferrite nanoparticles were prepared via co-precipitation method from aqueous salt solutions in an alkaline medium. The composition and structure of the samples were characterized through Energy Dispersive X-ray Spectroscopy and X-ray diffraction, respectively. Transmission Electron Microscopy (TEM) studies permitted determining nanoparticle size; grain size of nanoparticle conglomerates was established via Atomic Force Microscopy. The magnetic behavior of ferrofluids was characterized by Vibrating Sample Magnetometer (VSM); and finally, a magnetic force microscope was used to visualize the magnetic domains of Co_(1−x)Zn_xFe₂O₄ nanoparticles. X-ray diffraction patterns of Co_(1−x)Zn_xFe₂O₄ show the presence of the most intense peak corresponding to the (311) crystallographic orientation of the spinel phase of CoFe₂O₄. Fourier Transform Infrared Spectroscopy confirmed the presence of the bonds associated to the spinel structures; particularly for ferrites. The mean size of the crystallite of nanoparticles determined from the full-width at half maximum of the strongest reflection of the (311) peak by using the Scherrer approximation diminished from (9.5±0.3) nm to (5.4±0.2) nm when the Zn concentration increases from 0.21 to 0.75. The size of the Co-Zn ferrite nanoparticles obtained by TEM is in good agreement with the crystallite size calculated from X-ray diffraction patterns, using Scherer's formula. The magnetic properties investigated with the aid of a VSM at room temperature presented super-paramagnetic behavior, determined by the shape of the hysteresis loop. In this study, we established that the coercive field of Co_(1−x)Zn_xFe₂O₄ magnetic nanoparticles, the crystal and nanoparticle sizes determined by X-ray Diffraction and TEM, respectively, decrease with the increase of the Zn at%. Finally, our magnetic nanoparticles are not very hard magnetic materials given that the hysteresis loop is small and for this reason Co_(1−x)Zn_xFe₂O₄ nanoparticles are considered as soft magnetic material.     

Fabrication and magnetic property analysis of monodisperse manganese-zinc ferrite nanospheres

Monodisperse Mn-Zn ferrite (Mn_1−xZn_xFe₂O₄) nanospheres have been prepared via a simple solvothermal method. The as-synthesized samples were characterized in detail by X-ray diffraction pattern (XRD), transmission electron microscope (TEM), high-solution transmission electron microscope (HRTEM), select area electron diffraction pattern (SAED), scanning electron microscope (SEM), and vibrating sample magnetometer (VSM). The results show that a large number of the high-purity Mn_1−xZn_xFe₂O₄ nanocrystallites were synthesized and these nanocrystallites oriented aggregated to nanospheres. The dependence of magnetic properties of Mn_1−xZn_xFe₂O₄ nanospheres on the composition content x of Zn was studied. The maximum saturation magnetization value of the as-prepared sample (Mn_0.6Zn_0.4Fe₂O₄) reached 52.4 emu g⁻¹.     

Critical behaviour and magnetic properties of A-B spinel ZnxCu1−xFe2O4

Polycrystalline Zn_0.6Cu_0.4Fe₂O₄ ferrites have been prepared using a solid-state reaction technique. Their structural and magnetic properties have been studied, using X-ray diffraction and Mössbauer and magnetic measurements. These results have been compared to a more general theoretical study, on Zn_xCu_1−xFe₂O₄, based on mean field theory and high-temperature series expansions (HTSE), and extrapolated with the Padé approximant method. The nearest neighbour super-exchange interactions for the intra-site and the inter-site of Zn_xCu_1−xFe₂O₄ spinel ferrites, in the range 0≤x≤1, have been computed using the probability approach, based on Mössbauer data. The Curie temperature T_C is calculated as a function of Zn concentration. The theoretical results obtained are in good agreement with the experimental results obtained by magnetic measurements.     

Mössbauer characteristics of glauconitisation

Using 50 MeV Li^3?+? ion irradiation, the change induced in polycrystalline ferrites Li_0.5(1?+?x)Ti _x Al_0.1Fe_2.4???1.5x O₄ (x = 0.0 to 0.3, step–0.1)[LTAF] and Li_0.5(1?+?x)Ti _x Cr_0.1Fe_2.4???1.5x O₄ (x = 0.0 to 0.3, step–0.1; LTCF) in the electronic stopping power regime is studied. Both the systems were irradiated with the same fluence of 5 × 10¹³ ions/cm². The modifications of the structural and magnetic properties are studied by means of X-ray diffraction (XRD), magnetization, ⁵⁷Fe Mössbauer spectroscopy and low field a. c. susceptibility. The contrast in the role of Ti^4?+? in the presence of Al^3?+? and Cr^3?+? causing the formation of paramagnetic centres through Swift Heavy Ion Irradiation (SHII) induced cation rearrangement has been revealed through the comparative Mössbauer signatures of both the systems. The hyperfine interaction parameters deduced through Mössbauer spectra are also discussed before and after irradiation. The observed reduction in the saturation magnetic moment and Curie temperature after irradiation supports the partial formation of paramagnetic centres and rearrangement of cations in the lattice.     

Effect of Co 2 + content on the magnetic properties of Co x Fe 3 − x O 4 /SiO 2 nanocomposites

Non-stoichiometric Co_xFe_3???xO₄/SiO₂ (x = 0.8, 0.9, 1.0, 1.1) nanocomposites have been prepared by sol-gel method. The structure, morphology and magnetic properties of the obtained samples were characterized by X-ray diffraction, transmission electron microscopy, vibrating sample magnetometer and Mössbauer spectroscopy at room temperature. As the Co^2?+? content increases, the average particle size of the spherical Co_xFe_3???xO₄ in the samples decreases and the lattice constants increases. The hyperfine fields for both A- and B-site decrease, while the fraction of Co^2?+? occupying the A-site increases. Magnetization measurements show the saturation magnetization and coercivity of Co_xFe_3???xO₄/SiO₂ decrease with increasing Co^2?+? content. The decrease in magnetization results from the weakened A-B interactions between Fe^3?+?, and the change in coercivity can be related to the variation of Co^2?+? at B-site and the decreasing particle size.     

Magnetotransport and magnetic properties of sulfospinels Zn x Fe1−x Cr2S4

Cr-based chalcogenide spinels, which do not have heterovalency and distortion-induced ions such as manganese oxides with perovskite structure, have demonstrated the existence of colossal magnetoresistance. In order to investigate the magnetotransport phenomena and magnetic properties of sulfospinels Zn _x Fe_1?x Cr₂S₄, polycrystalline Zn _x Fe_1?x Cr₂S₄ samples were synthesized in the 0?≤?x?≤?0.2 range by a solid reaction method. The crystal structure for x?=?0.05, 0.1, and 0.2 turned out to be cubic at room temperature by X-ray diffraction measurement. In magnetoresistance measurement, Zn _x Fe_1?x Cr₂S₄ samples indicate that this system is semiconducting below about 150 K. The temperature of maximum magnetoresistance is almost consistent with Curie temperature. The isomer shift and the electric quadrupole shift of Zn _x Fe_1?x Cr₂S₄ samples by Mössbauer experiment show that Fe²⁺ ions occupy the tetrahedral site in the spinel structure. As the Zn ions are substituted for Fe ions, the Jahn–Teller relaxation slows down and the electric quadrupole shift increases. The magnetotransport phenomena of Zn _x Fe_1?x Cr₂S₄ is related to Jahn–Teller effect and half-metallic electronic structure, which are different from the double exchange interactions of the manganite La–Ca–Mn–O system or the triple exchange interactions of sulfospinel Cu _x Fe_1?x Cr₂S₄.     

The magnetic properties of diluted CoFe2O4 nanomaterials

The magnetic properties of （Cox Fe1-x）A （Zn1-x Fe1＋x）B O4 are studied using mean-field theory and the probability distribution law to obtain the saturation magnetization, the coercive field, the critical temperature, and the exchange interactions with different values of D （nm） and x. High-temperature series expansions （HTSEs） combined with the Pade approximant are used to calculate the critical temperature of （CoxFe1-x）A（Znl-xFe1＋x）BO4, and the critical exponent associated with magnetic susceptibility is obtained.     

Magnetism influenced by structural disorder in melt-spun DyMn6 − x Ge6 − x Fe x Al x (x = 2.5, 3)

Different chemical and/or geometrical orders were found in melt-spun DyMn_6???x Ge_6???x Fe _x Al _x with x = 2.5 and 3 having fully amorphous and mixed (crystalline and amorphous) structure, respectively. Thermal variations in magnetization M from liquid helium up to room temperature for both samples are similar. Magnetization value at zero field cooled curve reaches about 0.1 μ_B per formula unit at 2 K and then increases. Two maxima are visible, the first at 50 K (a sharp effect) and the second very broad ranging from 150 to 200 K. ⁵⁷Fe Mössbauer spectrometry investigation revealed a remaining magnetic component in addition to a prevailing quadrupolar feature. Application of a weak external magnetic field causes an increase in the mean hyperfine magnetic field B _hyp and the volume fraction of magnetic component. This observation was confirmed by results of M(T), M(H) and AC magnetic susceptibility measurements. In short-range ordered crystallographic zones characteristic of melt-spun DyMn_6???x Ge_6???x Fe _x Al _x (x = 2.5, 3) alloys, the related magnetic ordering, called the mictomagnetism or the cluster spin glass appears.     

Hydrogenation of FeCoZr–Al2O3 nanocomposites studied by Mössbauer spectroscopy and magnetometry

Hydrogenation effects on crystalline and magnetic structure of nanocomposites (FeCoZr) _x (Al₂O₃)_100???x , 38?≤?x?≤?63 at.% are studied by ⁵⁷Fe Mössbauer spectroscopy and magnetometry. Variations of local structure, blocking temperature and mean FeCoZr nanoparticles’ volume are discussed with respect to (i) composition and (ii) two competing processes—H₂ incorporation and annealing—occurred during treatment in H₂ plasma.     

Local structure and water cleaning ability of iron oxide nanoparticles prepared by hydro-thermal reaction

Nanoparticles (NPs) of Fe₃O₄ and γFe₂O₃ synthesized by hydrothermal reaction were characterized by X-ray diffractometry (XRD), ⁵⁷Fe-Mössbauer spectroscopy and field emission scanning electron microscopy (FE-SEM). A decrease in concentration of methylene blue (MB) aqueous solution due to bulk Fe⁰-NP γFe₂O₃ mixture with the mass ratio of 3:7 was measured by ultraviolet-visible light absorption spectroscopy (UV-Vis). The Mössbauer spectrum of NP Fe₃O₄ prepared from hydrothermal reaction was composed of two sextets with absorption area (A), isomer shift (δ) and internal magnetic field (H _int) of 56.3 %, 0.34_±0.03 mm s^???1 and 49.0_±0.30 T for tetrahedral (T _d) Fe^III, and 43.7 %, 0.66_±0.11 mm s^???1 and 44.0_±0.71 T for octahedral (O _h) Fe^II?+?III. The Fe^II/Fe^III ratio was determined to be 0.280 for NP Fe₃O₄, giving ‘x’ of 0.124 in Fe_3???xO_4. These results show that NP Fe₃O₄ prepared by hydrothermal reaction was not regular but nonstoichiometric Fe₃O₄. Consistent results were observed for XRD patterns of NP Fe_3???xO₄ indicating sharp intense peaks at 2Θ of 30.2, 35.7 and 43.3° with a large linewidth of 0.44°, yielding the crystallite size of 29–37 nm from the Scherrer’s equation. Iso-thermal annealing of NP Fe_3???xO₄ at 250 °C for 30 min resulted in the precipitation of NP γFe₂O₃ with δ of 0.33_±0.03 mm s^???1 and H _intof 46.4_±0.27 T due to magnetic tetrahedral Fe^III. The Debye temperature of NP Fe_3???xO₄ was respectively estimated to be 267_±5.45 K for Fe $^{\mathrm{III}}(T_{\mathrm{d}})$ and 282_±7.17 K for Fe $^{\mathrm{II+III}}(O_{\mathrm{h}})$ , both of which were smaller than that obtained for bulk Fe₃O₄ of 280_±4.15 K and 307_±5.70 K, indicating that the chemical environment of iron of NPs is less rigid than that of the bulk compounds. A leaching test using methylene blue (MB) and mixture of bulk Fe⁰-NP γFe₂O₃ (3:7) showed a remarkable decrease in MB concentration from 1.90 × 10^???2 to 9.49 × 10^???4 mM for 24 h with the first order rate constant (k _MB) of 2.1 × 10^???3 min^???1. This result verifies that MB decomposing ability is enhanced by using NP γFe₂O₃ compared with the k _MB of 1.1 × 10^???4 min^???1 previously obtained from the leaching test using MB and bulk mixture of Fe⁰???γFe₂O₃ (3:7).     

Magnetic studies of Bi x Y3-x Fe5O12 fabricated using conventional method

A series of Bi substituted yttrium iron garnet (Bi-YIG) nanoparticles with nominal formula of Bi _x Y_3???x Fe₅O₁₂ in which x varied in steps of 0.0, 0.25 and 0.5 are prepared by conventional method. Vibration sample magnetometer (VSM) at Room temperature (RT) shows saturation magnetization decreases from 27.4 to 25.2 (emu/g) as x value increases from 0.0 to 0.5. Room temperature ⁵⁷Fe Mössbauer spectra are recorded for these series. The hyperfine field value for octahedral and tetrahedral of samples increases from 484 and 390 kOe to 491 and 397 kOe respectability, as Bi replaces Y in (Bi _x Y_3???x Fe₅O₁₂) atom with increasing x value. The effect of Bi^3?+? substitution for Y^3?+? on lattice constants, morphology and magnetic properties of pure YIG has been investigated.