High-resolution infrared spectra of HCF3 in the ν6 (500 cm) and 2ν6 (1000 cm) regions: rovibrational analysis and accurate determination of the ground state constants C0 and DK

The high-resolution infrared spectrum of HCF₃ was studied in the ν₆ fundamental (near 500 cm⁻¹) and in the 2ν₆ overtones (near 1000 cm⁻¹) regions. The present study reports on the analysis of the hot bands in the ν₆ region, as well as the first observation and assignment of the 2ν₆² perpendicular band. Using ν₆, 2ν₆^±2–ν₆^±1 and 2ν₆² experimental wavenumbers, accurate coefficients C₀ and D_K⁰ of the K-dependent ground-state energy terms were obtained, using the so-called “loop method.” Ground-state energy differences Δ(K,J)=E₀(K,J)−E₀(K−3,J) were obtained for K=3–30. A least-squares fit of 81 such differences gave the following results (in cm⁻¹): C₀=0.1892550(15); D_K⁰=2.779(26) × 10⁻⁷.     

High-resolution infrared study of the 2ν3 (A1, E) and ν1 + ν3 (E) bands of NF3

The 2ν₃ overtone (A₁, E) and the ν₁ + ν₃ (E) combination bands of the oblate symmetric top ¹⁴NF₃ were studied by FTIR spectroscopy with a resolution of 2.5 × 10⁻³ cm⁻¹. Nearly 500 lines up to K_max/J_max = 30/43 were observed for the weak A₁ component reaching the v₃ = 2⁰ substate (1803.1302 cm⁻¹), the majority of which corresponded to reinforced K = 3p-type transitions. For the strong E component reaching the v₃ = 2^±2 substate (1810.4239 cm⁻¹), about 3550 transitions were assigned up to K_max/J_max = 65/69, favoring a clear observation of the ℓ(4, −2) and ℓ(4, 4) splittings within the kℓ = −2 and +4 sublevels, respectively. The two v₃ = 2 substates are linked by the ℓ(2, 2)- and ℓ(2, −1)-type interactions, providing severe crossings, respectively, at K′ = 6 and near K′ = 24 on the v₃ = 2⁺² side. A model working in the D-reduction and including all these ℓ-type interactions could reproduce together 3695 nonzero weighted experimental data (NZW) through 33 free parameters with a standard deviation of σ = 0.357 × 10⁻³  cm⁻¹. As for the ν₁ + ν₃ (E) combination band, about 3690 lines were assigned up to K_max/J_max = 45/55. Its v₁ = v₃ = 1 upper state (1931.577 5 cm⁻¹) was treated using the same model recently applied to the v₃ = 1 (E, 907.5413 cm⁻¹) state. It yielded 21 free parameters through 3282 NZW experimental data, adjusted with σ = 0.344 × 10⁻³  cm⁻¹ in the D-reduction. For the two excited states, the small and unobserved ℓ(0, 6) interaction was tested as useless. To confirm the adequacy of the vibrationally isolated models used, some other reductions of the Hamiltonian were tried. For the v₃ = 2 state, the D-, L-, and LD-reductions led to similar σ’s, while the Q one was not successful. For the v₁ = v₃ = 1 state, the D- and Q-reductions gave comparable σ’s, while the QD-reduction was not as good. The corresponding unitary equivalence relations are generally more nicely fulfilled for the v₃ = 2 state than for the v₁ = v₃ = 1 state. The three derivable anharmonicity constants in cm⁻¹ are x₃₃ = −4.1528, g₃₃ = +1.8235 and x₁₃ = −7.9652.     

Electronic and magnetic properties and their response to pressure in Ni2MnB

The electronic structure and magnetic properties of Ni₂MnB upon pressure up to 20 GPa have been studied by using the density functional theory (DFT) method. The results indicate that ferromagnetic ordered Ni₂MnB in L2₁ structure is more stable than the nonmagnetic one. The magnetic moments of Ni and Mn atoms as well as the total magnetic moment of Ni₂MnB are found to decrease weakly with increasing pressure. The pressure derivative of the total magnetic moment is −3.07×10⁻³ GPa⁻¹. The equilibrium bulk modulus and its derivative from the Murnaghan equation of state (EOS) are B₀=247.7 GPa, B′=4.98.     

EPR of Fe3+ ion and symmetry of [AIF5·H2O]2? complex ion in (NH4)2AIF5·H2O single crystals

We used the spin-Hamiltonian method for the analysis of the electron paramagnetic resonance (EPR) spectrum of Fe³⁺ as a probe ion in (NH₄)₂AlF₅·H₂O single crystalline basic material. The theoretical expressions for the magnetic field (at which the fine structure transition lines appear) versus the angle between the magnetic field and the axis of symmetry of the magnetic complex are also given. These values were calculated by applying the perturbation theory to the second-order terms. From the experimental results (at 300 K and 9.21 GHz), the spin-Hamiltonian parameters were deduced:D=(668±10)·10⁻⁴ T,E=(−56±10)·10⁻⁴ T,a=(−54±10)·10⁻⁴ T,F=(30±10)·10⁻⁴ T. An isotropic superhyperfine structure was evidenced for the five fluorine ions. The obtained EPR data were used to determine the local symmetry of the Al³⁺ ion. A good agreement with X-ray diffraction measurements was found.     

Structural studies on Na0.75CoO2 thermoelectric material at high pressures

The crystal structure of Na_0.75CoO₂ was studied at ambient and low temperatures down to 10 K at pressures up to 40 GPa using synchrotron x-rays and a diamond cell in angle dispersion geometry. A reduction in the c/a ratio was observed at both conditions with the application of pressure. An increase in Co–O bond lengths and a decrease in Na–O bond lengths were observed above 10 GPa. The results of the density functional calculations performed agree well with the pressure induced bond length changes. The anomalous change in the c/a ratio and bond lengths indicate a pressure induced isostructural phase transition above 10 GPa. Bulk modulus calculations show this compound is less compressible than its hydrated analogues.     

High-Resolution Infrared Spectroscopy of Methyl Isocyanide: The ν3, ν6, and ν7 + ν8 Bands

The vibration-rotation spectrum of methyl isocyanide (CH₃NC) has been recorded with the aid of a high-resolution Fourier transform spectrometer in the region 1370 to 1560 cm⁻¹ containing the perpendicular band of the fundamental vibration ν₆ (species E), the weaker parallel band of the ν₃ (A₁) fundamental, and the perpendicular combination band ν₇ + ν₈ (E) enhanced by Fermi resonance with ν₆. Sixteen hundred seventy well-resolved lines were assigned to 15 subbands of ν₆, 6 subbands of ν₃, and 3 subbands of ν⁻₇ + ν⁻₈. A strong x, y-Coriolis resonance between ν₃ and ν₆ and Fermi resonance between ν^±₆ and the E component ν₇ + ν₈, as well as between ν₃ and the A_1,2 components ν^±₇ + ν₈, greatly affects the spectrum. Additional weaker anharmonic interaction of ν₆ with the ν₄ + 2ν²₈ combination and higher-order rotational interactions connecting the various states were also detected in the spectrum. All of these interactions have been incorporated into a 9 × 9 Hamiltonian matrix used for modeling the upper states of the observed transitions. A set of spectroscopic constants is reported for the upper states of the bands ν₃, ν₆, and ν₇ + ν₈ and for ν₄ + 2ν²₈ which reproduces the observed lines with an overall standard deviation of 0.0012 cm⁻¹.     

New ferromagnetic La3Co2TaO9 double perovskite: Structural and magnetic properties

The new double perovskite La₃Co₂TaO₉ has been prepared by a solid-state procedure. The crystal and magnetic structures have been studied from X-ray powder diffraction (XRPD) and neutron powder diffraction (NPD) data. Rietveld refinements were performed in the monoclinic space group P2₁/n. The structure consists of an ordered array of alternating B′O₆ and B″O₆ octahedra sharing corners, tilted along the three pseudocubic axes according to the Glazer notation a⁻b⁻c⁺. Rietveld refinements show that at RT the cell parameters are a=5.6005(7) Å, b=5.6931(7) Å, c=7.9429(9) Å and β=89.9539(7)°, and the refined crystallographic formula of this “double perovskite” can be written as La₂(Co)_2d(Co_1/3Ta_2/3)_2cO₆. Magnetization measurements and low-temperature NPD data show that the perovskite is a ferromagnet with T_C=72 K. At high T it follows the Curie–Weiss law with an effective magnetic moment of 3.82μ_B per Co ion which is very close to spin only Co²⁺ (HS).     

In situ high-pressure X-ray diffraction experiments and ab initio calculations of Co2P

In situ high-pressure experiments of Co2P are carried out by means of angle dispersive X-ray diffraction with diamond anvil cell technique. No phase transition is observed in the present pressure range up to 15 GPa at room temperature, even at high temperature and 15 GPa. Results of compression for Co2P are well presented by the second-order Birch-Murnaghan equation of state with V0 = 130.99(2)3 (1=0.1 nm) and K0 = 160(3) GPa. Axial compressibilities are described by compressional modulus of the axis: Ka = 123(2) GPa, Kb = 167(8) GPa and Kc = 220(7) GPa. Theoretical calculations further support the experimental results and indicate that C23-type Co2P is stable at high pressure compared with the C22-type phase.     

The ν1 and ν3 stretching fundamental bands of PD3

The infrared (IR) spectrum of PD₃ has been recorded in the 1580–1800 cm⁻¹ range at a resolution of 0.0027 cm⁻¹. About 2400 rovibrational transitions with J^′=K^′22 have been measured and assigned to the ν₁ (A₁) and ν₃ (E) stretching fundamentals. These include 506 “perturbation-allowed” transitions with selection rules Δ(k−l)=±3. Splittings of the K^′′=3 lines have been observed. Effects of strong perturbations are evident in the spectrum. Therefore the rovibrational Hamiltonian adopted for the analysis explicitly takes into account the Coriolis and k-type interactions between the v₁=1 and v₃=1 states, and includes also several essential resonances within these states. The rotational structure in the v₁=1 and v₃=1 vibrational states up to J^′=K^′=18 was reproduced by fitting simultaneously all experimental data. Thirty-four parameters reproduced 1950 transitions retained in the final cycle with a standard deviation of the fit equal to 4.9 × 10⁻⁴ cm⁻¹ (about the precision of the experimental measurements).     

Millimeter-Wave and High-Resolution Infrared Spectra of Monoisotopic SCSe: Equilibrium, Ground State, and ν1, mν2, and nν3 Rovibrational Parameters

The Fourier transform infrared spectrum of monoisotopic SC⁸⁰Se has been investigated in the ν₂, ν₃, 2ν₂, 2ν₃, and ν₁ regions with a resolution between 3 and 4 × 10⁻³ cm⁻¹. In addition, the millimeter-wave spectrum has been studied in the region 150 to 320 GHz, and ground and ν₂ = 1 excited state transitions have been measured. Ground state constants, B₀ = 2043.285 4(4) MHz and D₀ = 146.53(5) Hz, have been determined from a merge of millimeter-wave data and ground state combination differences spanning J values up to 77 and 143, respectively. The band centers ν₂ = 352.341 075(9) cm⁻¹ and ν₃ = 505.480 06(5)cm⁻¹ have been determined. The rovibrational parameters of numerous overtone and combination levels (ν₁ν^l2₂ν₃) = 02⁰0, 02²0, 03¹0, 03³0, 04⁰0, 04²0, 00⁰2, and 00⁰3 have been obtained from polynomial analyses whose standard deviations ranged from 0.7 to 3.5 × 10⁻⁴ cm⁻¹. The 10⁰0 level, ν_eff 1435.840 cm⁻¹, is anharmonically perturbed by the 04⁰0 level, with an avoided crossing at J = 55, and W₁₂₂₂₂ = 0.963 09(1) cm⁻¹. Transitions to both the upper (E⁺) and lower (E⁻) sublevels of the dyad were observed for 1 ≤ J′ ≤ 117 and 4 ≤ J′ ≤ 171, respectively, and the deperturbed wavenumbers ν₁ = 1435.542 76(2) and 4ν⁰₂ = 1432.725 00(3) cm⁻¹ were derived. Furthermore, a local crossing of the E⁻ and 04²0 levels involving l-type resonance was observed at J = 91.     

High pressure investigation on double perovskite Ba2MgWO6

The results of high-pressure angle dispersive X-ray diffraction measurements up to 34.3 GPa on the double perovskite Ba₂MgWO₆ are presented. The ambient rock salt phase (SG: Fm-3m) is found to be stable up to the highest pressure of the present measurements. The third order Birch-Murnaghan equation of state when fitted to pressure-volume data, yielded a zero pressure bulk modulus (B₀),and its first and second pressure derivatives as 137.0(81) GPa, and 3.9(5) and −0.03 GPa⁻¹, respectively.     

High-resolution infrared and millimeterwave spectra of the v3=1 vibrational state of NF3 at 907 cm

The ν₃^±1 perpendicular band of ¹⁴NF₃ ( cm⁻¹) has been studied with a resolution of 2.5 × 10⁻³ cm⁻¹, and 3682 infrared (IR) transitions (J_max=55, K_max=45) have been assigned. These transitions were complemented by 183 millimeterwave (MMW) rotational lines (J_max=25, K_max=19) in the 150–550 GHz region (precision 50–100 kHz). The kl=+1 level reveals a strong A₁/A₂ splitting due to the l(2,2) rotational interaction (q=−4.05 × 10⁻³ cm⁻¹) while the kl=−2 and +4 levels exhibit small A₁/A₂ splittings due to l(2,−4) and l(0,6) rotational interactions. All these splittings were observed by both experimental methods. Assuming the v₃=1 vibrational state as isolated, a Hamiltonian model of interactions in the D reduction, with l(2,−1) rotational interaction (r=−1.96 × 10⁻⁴ cm⁻¹) added, accounted for the observations. A set of 26 molecular constants reproduced the IR observations with σ_IR=0.175 × 10⁻³ cm⁻¹ and the MMW data with σ_MMW=134 kHz. The Q reduction was also performed and found of comparable quality while the QD reduction behaved poorly. This may be explained by a predicted Coriolis interaction between v₃=1 and v₁=1 (A₁, 1032.001 cm⁻¹) which induces a slow convergence of the Hamiltonian in the QD reduction but has no major influence on the other reductions. The experimental equilibrium structure could be calculated as: r_e(N–F)=1.3676 Å and (FNF)=101.84°.     

Magnetic behaviour of Cu2FeGeSe4

Measurements of magnetic susceptibility χ as a function of temperature T and of magnetisation M as a function of applied magnetic field H at a number of fixed temperatures were made on polycrystalline samples of Cu₂FeGeSe₄. The χ versus T data show that an antiferromagnetic transition occurs at 20 K and that a second transition occurs at 8 K, indicating a transition to weak ferromagnetic form. The M versus H curves indicated that at all temperatures below 70 K bound magnetic polarons (BMP) occur, in the paramagnetic, antiferromagnetic and weak ferromagnetic ranges. Below 8 K, the M versus H curves exhibited magnetic hysteresis, and this is attributed to the interaction of the BMPs with tetragonally anisotropic matrix. The B versus H curves were well fitted by a Langevin-type of equation, and the variation of the fitting parameters determined as a function of temperature. These showed that above 20 K the total BMP magnetisation fell almost linearly with increasing temperature and effectively disappeared at 70 K. The number of BMPs remained practically constant with temperature having a mean value of 6.55×10¹⁸/cm³. The analysis gave a value of 213 μ_B for the average magnetic moment of a BMP, corresponding to 42.4 Fe atoms. Using a simple spherical model, this gives the radius of a BMP as 12.0 Å.     

Paramagnetic and spin-glass properties of pyrochlore-like oxides Ln2Mn2/3Mo4/3O7 (Ln=Sm, Gd, Tb, or Y)

The magnetic properties of complex oxides Ln ₂Mn_2/3Mo_4/3O₇ (Ln=Sm, Gd, Tb, or Y) with a pyrochlore-type structure are studied in the temperature range 2–300 K. For all compounds in the paramagnetic state, the temperature dependence of the magnetic susceptibility is described by a generalized Curie-Weiss law with a temperature-independent component of ∼10⁻⁶ cm³/g and with a Weiss constant Θ<0 and |Θ|<16 K. At low temperatures (T<10–12 K), the compounds have spin-glass properties; they exhibit magnetic and temperature hysteresis and the typical dependences of the imaginary and real parts of the dynamic magnetic susceptibility on temperature and the frequency of an ac magnetic field in a wide range of magnetization relaxation times. The data obtained suggest that d electrons are responsible for the formation of frustrated exchange interactions in the compounds and that 4f electrons in the compounds with Sm or Tb provide strong magnetic-anisotropy effects. __________ Translated from Fizika Tverdogo Tela, Vol. 46, No. 2, 2004, pp. 287–295. Original Russian Text Copyright ? 2004 by Korolev, Bazuev.     

The bulk modulus of SmFeAs(O0.93F0.07)

The crystal structure of SmFeAs(O_0.93F_0.07) has been investigated under high pressure (up to ∼9 GPa) by means of synchrotron powder diffraction analysis followed by Rietveld refinement. The bulk modulus was calculated (K₀ = 103 GPa) using a 3rd order Birch–Murnaghan equation of state and resulted in quite good agreement with theoretical calculations reported for LaFeAsO. The linear compressibilities β_a and β_c are 2.11(4) and 4.56(7) × 10⁻³ GPa⁻¹, respectively.     

Diborane : High-resolution infrared rovibration studies of B2D6

Studies of five comparatively unperturbed infrared active bands in the spectrum of ¹⁰B₂D₆ were undertaken with a resolution of ca. 0.05 cm⁻¹. These comprise three type-A bands (ν₁₇, ν₁₈, and ν₅ + ν₁₅), one type-B band (ν₈), and one type-C band (ν₁₄). Ground-state rotational and quartic centrifugal distortion constants were determined for the first time from a total of over 400 combination differences. Sets of upper-state parameters were determined for all five bands studied, and the effects of a number of minor Coriolis interactions between fundamental vibrations are discussed.     

Reduction of hysteresis loss and large magnetocaloric effects in substituted compounds of itinerant-electron metamagnets La(FexSi1−x)13

The maximum value of hysteresis loss E_h^MAX due to the itinerant-electron metamagnetic (IEM) transition of La(Fe_xSi_1−x)₁₃ and the partially substituted compounds La_1−zCe_z(Fe_0.86Si_0.14)₁₃ and La_1−z′Pr_z′(Fe_0.86Si_0.14)₁₃ increases when the magnetocaloric effects (MCEs) become large. It should be noted that the reduction of E_h^MAX without the decrease of large MCEs is achieved in La_1−zCe_z(Fe_0.86Si_0.14)₁₃ and La_1−z′Pr_z′(Fe_0.86Si_0.14)₁₃. For both the compound systems mentioned above, the critical temperature T₀ for the IEM transition decreases and the difference between T₀ and the Curie temperature T_C becomes larger with decreasing T_C. These results are consistent with the magnetic phase diagram of La(Fe_0.86Si_0.14)₁₃ under hydrostatic pressure. Consequently, the reduction of E_h^MAX in La_1−zCe_z(Fe_0.86Si_0.14)₁₃ and La_1−z′Pr_z′(Fe_0.86Si_0.14)₁₃ is closely related with the magnetovolume effects.     

Influence of oxygen growth pressure on laser ablated Cr-doped In2O3 thin films

We present a systematic investigation of the effects of oxygen growth pressure on the structural, optical, and electrical properties of In₂O₃:Cr thin films grown by pulsed laser deposition. X-ray diffraction analysis showed increases in lattice constant from 10.103 Å to 10.337 Å, and in particle size from 13.9 nm to 35.5 nm as the oxygen growth pressure increased from 7.5 × 10⁻⁶ Torr to 7.5 × 10⁻³ Torr, respectively. The observed shift in the X-ray diffraction peaks to lower angles was assumed to be caused by the reduction in the lattice defect density, precisely oxygen vacancies. The optical transparency increased with partial oxygen pressure (P_O2), and an average transmittance of 85% was obtained at 7.5 × 10⁻³ Torr. The films are highly conducting with resistivity as low as 2 × 10⁻⁴ Ω cm and mobility as high as 133 cm/V s. Temperature dependent resistivity measurements in the 45 < T < 300 K temperature range reveal that films grown at 7.5×10⁻⁶≤P_O2≤7.5×10⁻⁴ Torr exhibit negative temperature coefficient of resistivity (TCR) below approximately T = 60 K, T = 120 K, T = 160 K; then positive TCR in the temperature intervals 60 < T < 300 K, 120 < T < 300 K, and 160 < T < 300 K, respectively. This suggests that two disparate mechanisms govern electrical dc transport in the two temperature regions. Film grown at P_O2 of 7.5 × 10⁻³ Torr displayed typical semiconducting behavior with negative TCR in the whole temperature region.     

The bending energy levels of C2H2

Absorption spectra of C₂H₂ have been recorded between 50 and 1450 cm⁻¹, with a resolution always better than 0.005 cm⁻¹, using two different Fourier transform spectrometers. Analysis of the data provided two sets of results. First, the bending levels with Σ_t V_t(t = 4, 5) ≤ 2 were characterized by a coherent set of 34 parameters derived from the simultaneous analysis of 15 bands, performed using a matrix Hamiltonian. The following main parameters were obtained (in cm⁻¹): ω₄⁰ = 608.985196(14), ω₅⁰ = 729.157564(10); B₀ = 1.17664632(18), α₄ = −1.353535(86) × 10⁻³, α₅ = −2.232075(40) × 10⁻³; q₄⁰ = 5.24858(12) × 10⁻³, and q₅⁰ = 4.66044(12) × 10⁻³, with the errors (1σ) on the last quoted digit. Second, a more complete set of bending levels with Σ_t V_t ≤ 4, some of which have never previously been reported, and also including V₂ = 1 have been fitted to 80 parameters. This simultaneous fit involved 43 bands and used the same full Hamiltonian matrix. Some perturbations which affect the higher excited levels are discussed.     

Structure and chemical bond characteristics of LaB6

The structure and chemical bond characteristics of LaB₆ have been achieved by means of the density functional theory using the state-of-the-art full-potential linearized augmented plane wave (FPLAPW) method, which are implemented within the EXCITING code. The results show our optimized lattice constant a (4.158 Å), parameter z (0.1981) and bulk modulus B (170.4 GPa) are in good agreement with the corresponding experimental data. Electron localization function (ELF) shows the La–La bond mainly is ionic bond, La–B bond is between ionic and covalent bond while the covalent bond between the nearest neighbor B atoms (B2 and B3) is a little stronger than that between the nearer neighbor B atoms (B1 and B4).