共查询到20条相似文献,搜索用时 31 毫秒
1.
Based on Timoshenko beam model, a theoretical model of radially polarized piezoelectric ceramic tubes is investigated. In the model, the piezoelectric effects are considered, and the shear correction factor is introduced which reveals effects of the size of the cross-section and Poisson’s ratio. Based on the model, the particular attentions are devoted to effects of the boundary conditions at two ends on flexural resonance frequencies of the piezoelectric ceramic tubes. Changing the sizes of the tubes and the mass loads at both free ends, the variations of the flexural resonance frequencies of free–free piezoelectric ceramic tubes are calculated theoretically. Besides, the flexural resonance frequencies of the piezoelectric ceramic tube cantilevers with mass loads at one free end are also investigated theoretically. To verify accuracy of the theoretical mode, the flexural resonance frequencies for different lengths of the piezoelectric ceramic tubes and different loaded masses are measured experimentally. The theoretical results agree well with the experimental measurement, which demonstrates that the model is accurate for analyzing the flexural resonance frequencies of the piezoelectric ceramic tubes with mass loads. 相似文献
2.
Theoretical analysis and experimental validation of radial cascaded composite ultrasonic transducer
下载免费PDF全文
![点击此处可从《中国物理 B》网站下载免费的PDF全文](/ch/ext_images/free.gif)
《中国物理 B》2021,(4)
A radial cascaded composite ultrasonic transducer is analyzed.The transducer consists of three short metal tubes and two radially polarized piezoelectric ceramic short tubes arranged alternately along the radial direction.The short metal tubes and the piezoelectric ceramic short tubes are connected in parallel electrically and in series mechanically,which can multiply the input sound power and sound intensity.Based on the theory of plane stress,the electro-mechanical equivalent circuit of radial vibration of the transducer is derived firstly.The resonance/anti-resonance frequency equation and the expression of the effective electromechanical coupling coefficient are obtained.Excellent electromechanical characteristics are determined by changing the radial geometric dimensions.Two prototypes of the transducers are designed and manufactured to support the analytical theory.It is concluded that the theoretical resonance/anti-resonance frequencies are consistent with the numerical and experimental results.When R_2 is at certain values,both the anti-resonance frequency and effective electromechanical coupling coefficient corresponding to the second mode have maximal values.The radial cascaded composite ultrasonic transducer is expected to be used in the fields of ultrasonic water treatment and underwater acoustics. 相似文献
3.
Y. Wasserman 《Journal of sound and vibration》1978,59(2):181-194
In this work, exact formulae have been obtained for determining the lowest natural frequencies and critical loads of elastic circular arches with flexibly supported ends for symmetrical vibration in the direction perpendicular to the initial curvature of the arch. This investigation is concerned with three cases of load behaviour during the process of deformation. The values of the frequencies and critical loads are shown to be dependent on the opening angle of the arch, on the stiffness of the flexibly supported ends and on the ratio of the flexural rigidity to the torsional rigidity of the arch cross-section. 相似文献
4.
Shuyu L 《The Journal of the Acoustical Society of America》2002,112(2):511-517
Based on the classical torsional and flexural vibrational theory of a slender rod, the prestressed sandwich torsional-flexural composite mode piezoelectric ceramic ultrasonic transducer is studied. This type of transducer consists of the slender metal rods and the longitudinally and tangentially polarized piezoelectric ceramic rings. The resonance frequency equations for the torsional and flexural vibrations in the transducers are derived. The simultaneous resonance of the torsional and flexural vibrations in the transducer is acquired by correcting the length of the metal slender rods resulting from the piezoelectric ceramic elements. The experimental results show that the measured resonance frequencies of the transducers are in good agreement with the computed ones, and the measured resonance frequencies of the torsional and the flexural vibrations in the composite transducers are also in good agreement with each other. 相似文献
5.
Study on the Langevin piezoelectric ceramic ultrasonic transducer of longitudinal-flexural composite vibrational mode 总被引:1,自引:0,他引:1
Lin S 《Ultrasonics》2006,44(1):109-114
In this paper, the Langevin longitudinal-flexural composite mode piezoelectric ultrasonic transducer is studied. This type of transducers consists of slender metal rods and longitudinally polarized piezoelectric ceramic rings. The resonance frequency equations for the longitudinal and flexural vibrations in the transducer are derived. By correcting the length of the metal slender rods, the simultaneous resonance of the longitudinal and flexural vibrations in the transducer is acquired. The experimental results show that the measured resonance frequencies of the transducers are in good agreement with the computed ones, and the measured resonance frequencies of the longitudinal and the flexural vibrations in the composite transducers are also in good agreement with each other. 相似文献
6.
Shuyu L 《The Journal of the Acoustical Society of America》2001,109(3):949-957
Air-coupled transducers for producing ultrasonic radiation in gases are studied. The transducer consists of a circular thin plate in flexural vibration and a sandwich longitudinal electromechanical vibrator that is attached to the center of the plate. The lowest-order axially symmetric flexural vibrational mode of a circular thin plate is analyzed. The equivalent circuits of the circular plate in flexural vibration and the compound transducer are presented and the frequency equation is derived. The radiated ultrasonic field of the circular thin plate in flexural vibration is calculated and the directivity pattern is obtained theoretically. Some transducers of this type are designed according to the frequency equation, and their resonance frequencies are measured. The measured resonance frequencies are in good agreement with the theoretical results, and the calculated radiation ultrasonic field is also in good agreement with the measured results of a previous work. 相似文献
7.
D.J. MEAD 《Journal of sound and vibration》2002,249(1):101-127
This paper examines the natural frequencies and modes of transverse vibration of two simple redundant systems comprising straight uniform Euler-Bernoulli beams in which there are internal self-balancing axial loads (e.g., loads due to non-uniform thermal strains). The simplest system consists of two parallel beams joined at their ends and the other is a 6-beam rectangular plane frame. Symmetric mode vibration normal to the plane of the frame is studied. Transcendental frequency equations are established for the different systems. Computed frequencies and modes are presented which show the effect of (1) varying the axial loads over a wide range, up to and beyond the values which cause individual members to buckle (2) pinning or fixing the beam joints (3) varying the relative flexural stiffness of the component beams. When the internal axial loads first cause any one of the component beams to buckle, the fundamental frequency of the whole system vanishes. The critical axial loads required for this are determined. A simple criterion has been identified to predict whether a small increase from zero in the axial compressive load in any one member causes the natural frequencies of the whole system to rise or fall. It is shown that this depends on the relative flexural stiffnesses and buckling loads of the different members. Computed modes of vibration show that when the axial modes reach their critical values, the buckled beam(s) distort with large amplitudes while the unbuckled beam(s) move either as rigid bodies or with bending which decays rapidly from the ends to a near-rigid-body movement over the central part of the beam. The modes of the systems with fixed joints change very little (if at all) with changing axial load, except when the load is close to the value which maximizes or minimizes the frequency. In a narrow range around this load the mode changes rapidly. The results provide an explanation for some computed results (as yet unpublished) for the flexural modes and frequencies of flat plates with non-uniform thermal stress distributions. 相似文献
8.
提出了一种阶梯圆环径向振动压电超声换能器,根据力电类比原理建立了阶梯圆环及阶梯圆环换能器的径向振动等效电路,推导了阶梯圆环的径向共振频率方程和位移放大系数,在此基础上进一步推导了换能器的径向共振和反共振频率方程。通过理论推导和有限元仿真模拟分析了阶梯圆环压电超声换能器的径向振动性能。结果表明,增大阶梯圆环中内外环的径向厚度之比K1或减小轴向厚度之比K2,阶梯圆环的一阶径向共振频率减小,二阶径向共振频率增大;在二阶径向共振模式下,K1、K2值在一定范围内阶梯圆环可实现由内向外的径向位移振幅放大;随着压电陶瓷圆环的内半径增大,阶梯圆环压电超声换能器的一阶、二阶径向共振和反共振频率减小,二阶径向共振下的有效机电转换系数趋于零;增大阶梯圆环内环的外半径,换能器的一阶径向共振和反共振频率减小,二阶径向共振和反共振频率先增大后减小,理论推导与仿真模拟结果符合良好。本文研究结果为阶梯圆环压电超声换能器的工程应用提供理论参考。 相似文献
9.
Flexural resonance vibrations of piezoelectric ceramic tubes in Besocke-style scanners with nanometer resolution are studied by using an electro-mechanical coupling Timoshenko beam model.Meanwhile,the effects of friction,the first moment,and moment of inertia induced by mass loads are considered.The predicted resonance frequencies of the ceramic tubes are sensitive to not only the mechanical parameters of the scanners,but also the friction acting on the attached shaking ball and corresponding bending moment on the tubes.The theoretical results are in excellent agreement with the related experimental measurements.This model and corresponding results are applicable for optimizing the structures and performances of the scanners. 相似文献
10.
Lin S 《Ultrasonics》2006,44(Z1):e545-e548
The high power air-coupled compound ultrasonic transducer in flexural vibration is studied. The transducer consists of a sandwich longitudinal piezoelectric transducer and a circular thin plate in flexural vibration. The resonance frequency equation and the equivalent circuit of a circular radiator with clamped boundary condition are derived. The resonance frequency equation and the equivalent circuit of the compound transducer are also obtained. The radiated acoustic field of the circular thin plate radiator is analyzed and the directional pattern is calculated. It can be seen that when the vibrational order of the circular thin plate in flexural vibration is increased, the radiated acoustic field becomes complex. 相似文献
11.
The combination of ultrasound with atomic force microscopy (AFM) opens the high lateral resolution of scanning probe techniques in the nanometer range to ultrasonics. One possible method is to observe the resonance frequencies of the AFM sensors under different tip-sample interaction conditions. AFM sensors can be regarded as small flexible beams. Their lowest flexural and torsional resonance frequencies are usually found to be in a range between several kHz and several MHz depending on their exact geometrical shape. When the sensor tip is in a repulsive elastic contact with a sample surface, the local indentation modulus can be determined by the contact resonance technique. Contact resonances in the ultrasonic frequency range can also be used to improve the image contrast in other dynamic techniques as, for example, in the so-called piezo-mode. Here, an alternating electric field is applied between a conducting cantilever and a piezoelectric sample. Via the inverse piezoelectric effect, the sample surface is set into vibration. This excitation is localised around the contact area formed by the sensor tip and the sample surface. We show applications of the contact resonance technique to piezoelectric ceramics. 相似文献
12.
A new type of compound multifrequency ultrasonic transducer is analyzed in this paper. The compound multifrequency ultrasonic transducer consists of two sandwiched ultrasonic transducers and a rectangular radiator. In virtue of the coupling between longitudinal vibration of the sandwiched ultrasonic transducers and flexural vibration of the rectangular radiator, the compound multifrequency ultrasonic transducer can produce several resonance frequencies. Some compound multifrequency ultrasonic transducers are designed and simulated by finite element method (ANSYS), and modal shapes and harmonic response are analyzed. The compound multifrequency ultrasonic transducers are designed and manufactured. The resonance frequencies are measured and compared with the numerical results. The effect of the geometrical dimensions of the compound multifrequency ultrasonic transducer and the location of two sandwiched ultrasonic transducers on the compound multifrequency ultrasonic transducer is discussed. It is shown experimentally and numerically that the compound multifrequency ultrasonic transducer has several resonance frequencies. 相似文献
13.
Z. Celep 《Journal of sound and vibration》1978,61(3):375-381
In this paper the vibration and stability of a free-free beam subjected to direction-controlled axial loads at its ends are investigated. The eigencurves and mode shapes of the beam are presented for various values of the directional control parameter. It is found that the behaviour of the free-free beam subjected to compressive axial loads is unstable for any direction parameter—except for the follower loading case. However, the same beam subjected to tensile loads is stable. 相似文献
14.
模式转换型超声塑焊振动系统的设计 总被引:4,自引:0,他引:4
基于弯曲振动理论和耦合振动理论,设计了一种新型大尺寸筒形超声塑焊振动系统。该振动系统由纵向振动换能器及变幅杆、弯曲振动金属圆盘和耦合振动圆筒四部分组成。换能器和变幅杆的纵向振动驱动圆盘的二次弯曲模式振动,圆盘的二次弯曲模式振动激励圆筒的纵向模式振动,实现了工具头在较高频率下谐振。实验结果表明,振动系统的测试频率与计算频率比较符合,在大信号下测试的纵-弯-纵振动模式转换效果很好。研究结果为高频大尺寸超声焊接系统的设计提供了思路。 相似文献
15.
Lin Shuyu 《Ultrasonics》1994,32(6):461-465
The sandwiched piezoelectric ultrasonic torsional transducer was studied. The transducer consists of front and back metal cylinders, and coaxially segmented, tangentially polarized, piezoelectric ceramic tubes. The torsional vibration of the tangentially polarized piezoelectric ceramic slender tube was studied first and its electromechanical equivalent circuit was derived. Based on the network theory and the electromechanical equivalent circuit, the torsional vibration of the piezoelectric ceramic cylinder, formed by stacking a number of identical short piezoelectric ceramic rings, was analysed and the electromechanical equivalent circuit of the piezoelectric ceramic stack in torsional vibration was developed. Finally, the sandwiched ultrasonic torsional transducer was studied and resonance frequency equations were derived which can be used to design and calculate the torsional transducers for different applications. 相似文献
16.
本文对夹心式纵-扭复合振动模式压电超声换能进行了研究,从换能器的等效电路出发,在无耦合时,得出换热能器纵向振动模式及扭转振动模式的各自共振频率方程,实验表明,换能器各自共振频率的测试值与理论计算值基本符合。 相似文献
17.
本文对夹心式纵-扭复合振动模式压电超声换能器进行了研究.从换能器的等效电路出发,在无耦合时,得出了换能器中纵向振动模式及扭转振动模式的各自共振频率方程.实验表明,换能器各自共振频率的测试值与理论计算值基本符合. 相似文献
18.
19.
矩形板高阶模式超声振动辐射器的研究 总被引:1,自引:0,他引:1
在耦合振动理论以及矩形截面细棒弯曲振动的基础上,本文对矩形薄板的弯曲振动进行了研究,推出了自由边界矩形薄板的弯曲振动频率方程,研究了薄板的振动模式及其与共振频率的关系.实验表明,矩形薄板弯曲振动共振频率的测量值与计算值符合很好.用共振式矩形薄板作为超声清洗等液体中超声应用技术的声波辐射器具有声场分布均匀,换能器频率调节容易,声波辐射面大等优点,是一种很有前途的新型超声源。 相似文献
20.
径向复合压电陶瓷超声换能器的径向振动特性研究 总被引:1,自引:0,他引:1
对径向复合压电陶瓷超声换能器的径向振动特性进行了分析。该换能器由一个厚度极化的压电陶瓷实心圆盘和一个金属圆环在半径方向复合而成。论文首先研究了压电陶瓷圆盘及金属圆环的径向振动,推出了其径向振动的机电等效电路。在此基础上,利用换能器的径向边界条件,得出了径向复合压电陶瓷换能器的机电等效电路及其共振频率方程。探讨了换能器的共振频率和有效机电耦合系数与其几何尺寸之间的依赖关系。设计并实际制作了一些径向复合超声换能器,对其径向共振及反共振频率进行了测试,并利用有限元法进行了数值模拟。研究表明,利用文中理论得出的换能器的共振频率与实测值及数值模拟结果基本符合。 相似文献