Reactions of (η5-C5H5)2Tir compounds with organic cyanides

The syntheses and properties of the titanium(III) complexes Cp₂Tir · R′CN (R = C₆H₅, o-, m-, p-CH₃C₆H₄, CH₂C₆H₅, C₆F₅, Cl; R′ = CH₃, t-C₄H₉, C₆H₅, o-CH₃C₆H₄, 2,6-(CH₃)₂C₆H₃) are described. In the complexes the nitrogen atom of the cyanide ligands is coordinated to the metal. The thermal stabilities of the complexes depend markedly on R and R′; on heating they undergo a novel reaction in which two cyanide ligands are coupled by formation of a CC bond, while the metal is oxidized to titanium(IV).     

C2H4在Fe3C(100)表面吸附及脱氢裂解的密度泛函理论研究

采用自旋极化密度泛函理论和周期平板模型,对C₂H₄在铁基费托合成催化剂活性相之一Fe₃C（100）表面从热力学和动力学两个方面分析了C₂H₄在Fe₃C（100）表面进行脱氢和裂解反应的竞争性。结果表明,C₂H₄在Fe₃C（100）表面的μ-bridging吸附比π、di-σ吸附更加稳定;C₂H₄与Fe₃C（100）面的相互作用导致C₂H₄的C原子部分发生重新杂化（sp²→sp³）,使C原子呈近四面体结构。在Fe₃C（100）表面C₂H₄易于发生脱氢反应,C-C键裂解反应不具有竞争性。亚乙烯基CCH₂和乙烯基CHCH₂是Fe₃C（100）表面最丰的C₂物种,或是C₂H₄参与链增长的主要单体形式。     

Synthesis and x-ray crystallographic structural determination of the acetylene complex (η5−C5H5)2W2(CO)4(C2H2)

Reaction of photogenerated (η⁵?C₅H₅)₂W₂(CO)₄ with acetylene at 25°C yields a complex of the formula (η⁵-C₅H₅)₂W₂(CO)₄(C₂H₂). The crystal structure of the complex shows it to have a tetrahedrane-like W₂C₂ core. The C—C bond distance of the C₂H₂ unit is 1.33 Å which is close to that of ethylene, considerably longer than the 1.20 Å for acetylenes. The W—W distance is 2.987 Å which is ～0.25 Å shorter than the W—W distance in (η⁵-C₅H₅)₂W₂(CO)₆ but longer than that expected for (η⁵-C₅H₅)₂W₂(CO)₄. By analogy to the parent (η⁵-C₅H₅)₂M₂(CO)₆ species, the near-UV absorption in (η⁵-C₅H₅)₂M₂(CO)₄(C₂H₂) is assigned to a σ_b → σ^* transition. Owing to the shorter M—M bond in the C₂H₂ adducts, the σ_b → σ^* absorption is at higher energy than in the (η⁵-C₅H₅)₂M₂(CO)₆ complexes.     

AB Initio molecular orbital calculations on the si2h4molecule

Ab initio molecular orbital calculations using an extended Gaussian basis set have been performed on C₂H₄, CH₂SiH₂ and Si₂H₄. The species CH₂ and SiH₂ have also been examined. Geometries were partially optimized and the energy difference between the planar singlet and orthogonal or twist triplet geometries of Si₂H₄ was studied in order to provide a measure of the strength of the Si-Si bond in this molecule. Mulliken population analyses were carried out on CH₂CH₂ and SiH₂SiH₂, to further study the nature of the Si-Si double bond in comparison with the C—C double bond.     

Comparative study on the Al–Al multiple bond in Na2[Arx′AlAlArx′] and H2[Arx′AlAlArx′] (Arx′?=?C6H3-2, 6-(C6H5)2)

The Al–Al multiple bond in Na₂[Arx′AlAlArx′] (Arx′ = C₆H₃-2,6-(C₆H₅)₂) was investigated and compared with H₂[Arx′AlAlArx′] by electron localization function (ELF) method. The roles of sodium, hydrogen atoms, and bulky ligands in these two complexes were also discussed. The calculated results show that Na₂[Arx′AlAlArx′] and H₂[Arx′AlAlArx′] have different structural and electronic features. In Na₂[Arx′AlAlArx′], the Al–Al bond includes a σ bond, a normal π bond and a slipped π bond. In H₂[Arx′AlAlArx′], the direct Al–Al bond was substituted by two 3-center, 2-electron (3c–2e) bridged bonding, which formed by the hydrogen and two aluminum atoms. The bulky ligands play important stabilizing roles in both Na₂[Arx′AlAlArx′] and H₂[Arx′AlAlArx′].     

Fulvene—platinum complexes: x-ray crystal structure of [Pt(η2-C5H4CPh2)(PPh3)2]

Bis(cycloocta-1,5-diene)platinum reacts with 2,3,4,5-tetraphenylfulvene to afford the complex [Pt(η²-CH₂C₅Ph₄)(cod)] (cod  C₈H₁₂) in which the metal atom is coordinated to the exo-cyclic double bond of the fulvene. Related compounds [Pt(η²-CH₂C₅Ph₄L₂] (L  PPh₃, PMePh₂, PMe₂Ph, AsPh₃ or CNBu^t have also been prepared and characterised. Reaction of the complexes [Pt(C₂H₄)₂(L)] (L  P(cyclo-C₆H₁₁)₃, PPh₃ or AsPh₃) with 2,3,4,5-tetraphenylfulvene yields the compounds [Pt(C₂H₄)(η²-CH₂C₅PH₄)(L)]. NMR data for the new species are reported and discussed. 6,6-Diphenylfulvene reacts with [Pt(cod)₂] and PPh₃ ($\text{1}\text{2}$ mol ratio) to give the complex [Pt(η²-C₅H₄CPh₂)-(PPh₃)₂] in which the metal atom is bonded to carbon atoms C(2) and C(3) of the fulvene ring. This was established by an X-ray diffraction study. Crystals are monoclinic, space group P2₁/n, with Z  4 in a unit cell of dimensions a  13.761(4), b  21.653(13), c  17.395(6) Å, β,  104.46(2)°. The structure has been solved and refined to R  0.064 (R′  0.064) for 3139 independent diffracted intensifies measured at room temperature. The platinum atom is in a trigonal environment formed by the two ligated phosphorus atoms and the CC bond of the fulvene which is elongated to 1.52(3) Å. The c₅ fulvene ring is planar, and makes an angle of 108° with the coordination plane around the platinum. In this plane the metal atom is slightly asymmetrically bonded with PtC 2.15(2) and 2.24(2) Å, and PtP 2.280(6) and 2.301(6) Å.     

Dynamic Jahn–Teller effect and average structure of dicyclopentadienylcobalt, (C5H5)2Co,studied by gas phase electron diffraction

The molecular structure of (C₅H₅)₂Co has been determined by gas phase electron diffraction. The best agreement between calculated and experimental intensity curves is obtained with a model with eclipsed C₅H₅ rings (symmetry D_5h), but a model with staggered rings (symmetry D_5d) cannot be ruled out. The mean CoC and CC bond distances are 2.119(3) Å and 1.429(2) Å respectively. The average angle between the CH bonds and the C₅ ring is 2.1(0.8)°. The value obtained for the CC vibrational amplitude, l(CC) = 0.055(1) Å, is significantly larger than the amplitude calculated from a molecular force field and the corresponding amplitudes in (C₅H₅)₂Fe and (C₅H₅)₂Ni determined by electron diffraction, and confirms the presence of a dynamic Jahn—Teller effect of the magnitude calculated from ESR data. The average structure is compared with those of the metallocenes of the other first row transition elements.     

Temperature-programmed desorption/pulse surface reaction (tpd/tpsr) studies of CH4, C2H6, C2H4, and CO over a cobalt/MWNTs catalyst

Summary Temperature-programmed desorption (TPD) of CH₄, C₂H₆, C₂H₄, and CO and temperature-programmed pulse surface reactions (TPSR) of CH₄, C₂H₆, C₂H₄, CO, and CO/H₂ over a Co/MWNTs catalyst have been investigated. The TPD results indicated that CH₄ and C₂H₆ mainly exist as physisorbed species on the Co/MWNTs catalyst surface, whilst C₂H₄ and CO exist as both physisorbed and chemisorbed species. The TPSR results indicated that CH₄ and C₂H₆ do not undergo reaction between room temperature and 450^oC. Pulsed C₂H₄ can be transformed into CH₄ at 400 ^oC whilst pulsed CO can be transformed into CO₂ at 100 or 150^oC. In gaseous mixtures of CO and H₂ containing excess CO, the products of pulsed reaction were CH₃CHO and CH₃OH. When the ratio of CO and H₂ was 1:2, pulsed CO and H₂ were transformed into CH₃CHO, CH₃OH and CH₄. In H₂ gas flow, pulsed CO was transformed into a mixture of CH₃CHO and CH₄ between 200 and 250^oC and was transformed into CH₄ only above 250^oC.     

Formation of a four-electron donor carbonyl group in the decarbonylation of the unsaturated H2C2Fe2(CO)6 tetrahedrane as an alternative to an iron-iron triple bond

The unsaturated Fe₂C₂ tetrahedrane derivatives R₂C₂Fe₂(CO)₆ (R = Ph, ^tBu) are among the many products obtained from reactions of the alkynes RCCR with iron carbonyls. In this connection theoretical studies have been performed on the simplest such compounds H₂C₂Fe₂(CO)_n (n = 6, 5) for comparison with the experimentally known structure of the t-butyl derivative t-Bu₂C₂Fe₂(CO)₆ and in order to predict the decarbonylation pathways for such (alkyne)Fe₂(CO)₆ derivatives. These theoretical studies predict an Fe₂C₂ tetrahedrane structure for H₂C₂Fe₂(CO)₆ with a formal FeFe double bond very similar to the experimental structure for t-Bu₂C₂Fe₂(CO)₆. Decarbonylation of H₂C₂Fe₂(CO)₆ is predicted to give an H₂C₂Fe₂(CO)₅ isomer retaining the Fe₂C₂ tetrahedrane structure, with an FeFe double bond but with the unprecedented feature of a four-electron donor bridging carbonyl group in an M₂C₂ tetrahedrane structure. The formation of formal FeFe triple bonds appears to be avoided in even the higher energy H₂C₂Fe₂(CO)₅ structures. These include three triplet Fe₂C₂ tetrahedrane structures with formal FeFe double bonds as well as a coordinately unsaturated singlet structure, still with an FeFe double bond.     

Effect of the bridging ligands on the CO stretching force constants of the compounds Co2(CO)6(μ-Y)2 and Fe2(CO)6(μ-X)2 (where Y = CO,P, As,CR and X = S,SR, Se,PRR′, Br,I)

The molecular structures of (C₅H₅)₂V and (C₅H₅)₂Cr have been determined by gas phase electron diffraction. The best agreement between calculated and experimental curves is obtained for models with eclipsed C₅H₅ rings (symmetry D_5h), but models with staggered rings (symmetry D_5d) cannot be definitely ruled out. The MC and CC bond distances are 2.169(4) and 1.431(2) Å respectively in (C₅H₅)₂Cr, and 2.280(5) and 1.434(3) Å respectively in (C₅H₅)₂V. The CH bonds in (C₅H₅)₂Cr are bent 2.9(1.1)° out of the plane of the carbon atoms towards the metal atom.The molecular structures of the known di-π-cyclopentadienyl compounds of the first row transition elements are compared in the light of what is known about their electronic structures.     

Synthesis and structural characterization of [(C5H4)SiMe2(N-t-Bu)]Ti[(o-C6H4)C(Ph)C(Ph)], generated via an alkyne-Ti benzyne coupling reaction

The thermolysis of [(C₅H₄)SiMe₂(N-t-Bu)]TiPh₂ in the presence of diphenylacetylene proceeds at 80 °C in cyclohexane solution with the sole formation of the titanacyclic complex [(C₅H₄)SiMe₂(N-t-Bu)]Ti[(o-C₆H₄)C(Ph)C(Ph)], which has been characterized by solution NMR measurements and X-ray crystallographic analysis. This reaction is accompanied by the elimination of benzene and presumably occurs via coupling of a titanium benzyne intermediate with diphenylacetylene. The two chemically inequivalent Ti-C bonds of 2.081(7) and 2.103(6) Å in [(C₅H₄)SiMe₂(N-t-Bu)]Ti[(o-C₆H₄)C(Ph)C(Ph)] reflect the increased electrophilicity of the d⁰ Ti(IV) center arising from the presence of the bifunctional ansa-cyclopentadienyldimethylsilylamido ligand.     

Arylmercury(II) compounds involving intramolecular coordination via 2-Me2NCH2- and chiral (S)-2-Me2NCHMe-ring substituents

Arylmercury compounds of the type Ar₂Hg and ArHgX (X = Cl, OAc) have been synthesized and characterized by ¹H and ¹³C NMR spectroscopy; the Ar group was either 2-Me₂NCH₂C₆H₄ or (S)-2-Me₂NCH(Me)C₆H₄, both of which contain N-donor ligands. The observation of anisochronous NMe resonances in (S)-2-Me₂NCH(Me)C₆H₄HgX (X = Cl, OAc) at low temperature indicates that in solution the mercury centre is three-coordinate as a result of stable intramolecular HgN coordination     

Etude du mecanisme de photolyse des complexes cis- et trans-[PtCl2(C2H4)(4-CH3C5H4N)]. Influence de la concentration et de la longueur d'onde

Photodimerization, photoisomerization and photosubstitution quantum yields are measured for cis- and trans-[PtCl₂(C₂H₄)(4-CH₃C₅H₄N)], at various concentrations and wavelengths. Dissociation of the platinumethylene bond o?curs with a quantum yield nearly unity when the cis-compléx is irradiated in the charge transfer bands 5d → π^*(C₂H₄). Dissociation is also observed, but with a lower efficiency, at longer wavelengths. A cis → trans-photoisomerization reaction, probably via a low energy dd excited state is observed at 313,366 and 405 nm, with a constant quantum yield.     

Complexation and metallation of Ph2PCC(CH2)5CCPh2 in triosmium carbonyl clusters

Reaction of Ph₂PCC(CH₂)₅CCPh₂ with Os₃(CO)₁₀(NCMe)₂ affords Os₃(CO)₁₀(μ,η²-(Ph₂P)₂C₉H₁₀) (1) and the double cluster [Os₃(CO)₁₀]₂(μ,η²- (Ph₂P)₂C₉H₁₀)₂ (2), through coordination of the phosphine groups. Thermolysis of 1 in toluene generates Os₃(CO)₇(μ-PPh₂)(μ₃,η⁵-Ph₂PC₉H₁₀) (3) and Os₃(CO)₈(μ-PPh₂)(μ₃,η⁶-Ph₂P(C₉H₁₀)CO) (4). The molecular structures of 1, 3, and 4 have been determined by an X-ray diffraction study. Both 3 and 4 contain a bridging phosphido group and a carbocycle connected to an osmacyclopentadienyl ring, which are apparently derived from C-P bond activation and C-C bond rearrangement of the dpndy ligand governed by the triosmium clusters.     

Evidence for the distortion of C2H4 and C2H2 chemisorbed on W(100)

The adsorption of C₂H₄ on W(100) has been studied by ultraviolet photoelectron spectroscopy with hν = 21.22 eV. The spectrum measured after in initial saturation exposure at 80 K exhibits structure which correlates well with energy levels recently calculated by Demuth and Eastman (DE) for sp³ rehybridized C₂H₄. Dehydrogenation of the adsorbate, either by subsequent heating to 295 K or direct adsorption at 295 K, yields a spectrum which correlates with DE's calculation for sp² rehybridized C₂H₂. These results suggest that C₂H₄ and C₂H₂ may be distorted from their planar and linear structures respectively and that the CC bonds on these molecules are stretched by adsorption on W(100). Qualitative arguments suggest that the bonding site for both melecules is directly over a W atom and that the Dewar—Chatt model for πd bonding in organometallic compounds is applicable.     

Vapor phase hydrofluorination of acetylene to vinyl fluoride over La2O3-Al2O3 catalysts

A series of La-doped Al₂O₃ catalysts were prepared and tested for the vapor phase hydrofluorination of C₂H₂ to vinyl fluoride (CH₂CHF, VF). It was found that the La-doped catalyst gave a stable catalytic performance and a higher selectivity to the desired VF and a lower selectivity to coke deposition compared with the pure Al₂O₃ catalyst. The enhancement in VF selectivity on the La-doped catalyst was due to the elimination of acidic sites on the Al₂O₃ surface by the addition of La₂O₃, evidenced by NH₃-TPD results, which could also explain the declined selectivity to coke deposition on the catalyst. Raman result indicated there were two different vibration forms of CH distortion and CC expansion for the coke deposition.     

Die thermische reaktion von C5H5(CO)2FeNa mit benzimidchloriden C6H5(Cl)CNR

η⁵-C₅H₅(CO)₂FeNa reacts with the benzimide chlorides C₆H₅(Cl)CNR (R  CH(CH₃)₂, C₆H₅) in boiling THF to give the η¹-iminoacyl complexes η⁵-C₅H₅ (CO)₂Fe[η¹-C(C₆H₅)NR]. Alternatively, the new Fe complexes [η⁵-C₅H₅(CO)Fe$\text{C(C}{}_6\text{H}{}_5\text{)N(CH}{}_3\text{)C(C}{}_6\text{H}{}_5\text{)N}$CH₃PF₆ (IV) and [η⁵-C₅H₅(CO)₂FeC(C₆H₅)N(CH₃)C(C₆H₅)NCH₃]PF₆ (V) are formed under the same conditions, if R  CH₃. Hudrolysis of the CN single bond of the ligand in V, not stabilized by a chelate effects as in IV, results in the formation of [η⁵-C₅H₅(CO)₂FeC(C₆H₅)NHCH₃]PF₆ (VII). Reaction of η⁵-C₅H₅(CO)₂ with N-benyzylbenzimido chloride yields η⁵-C₅H₅(CO)₂FeCH₂C₆H₅ as the only isolated product.     

Thermal behaviour of two new salts of malonic acid: Cu(C3H2O4)·4H2O and Cu(NH4)2(C3H2O4)2

Two new salts of malonic acid have been prepared: the copper(II) malonate tetrahydrate and the copper(II)-ammonium double malonate. Their study by thermal analysis (TG and DTA) leads to the following results:Cu(C₃H₂O₄)·4H₂O: the dehydration is rather complex and it is only under careful conditions that an intermediate hydrate Cu(C₃H₂O₄)·3H₂O could be traced. At about 170°C the dehydration is not ended (the salt holds yet about 0.15H₂O) and the anhydrous salt occurs only at about 240°C. It decomposes immediately leading to residues the composition of which depends upon the surrounding atmosphere; the part played by the gas given off is discussed.Cu(NH₄)₂(C₃H₂O₄)₂: this salt melts and decomposes simultaneously at about 190°C. During the decomposition the copper nitride Cu₃N forms as intermediate compound (as well as copper metal). Concerning the final residues of the decomposition the results and the conclusions are the same as the ones of the previous case.     

Synthesis and reactions of a nucleophilic bis(μ-dimethylphosphido)dicobalt complex. The crystal and molecular structure of [C5H5Co(μ-PMe2)]2 and [(C5H5Co)2(μ-H)(μ-PMe2)2]BPh4

The bis(μ-dimethylphosphido)dicobalt complex [C₅H₅Co(μ-PMe₂)]₂ (II) has been prepared from Co(C₅H₅ and PMe₂H on almost quantitative yield. It has also been made by reduction of [C₅H₅Co(PMe₂H)₃]I₂ (IV) with NaH and from the reaction of [C₅H₅(PMe₃)Co(μ-CO)₂Mn(CO)C₅H₄Me] with PMe₂H. Protonation of II with CF₃CO₃H in the presence of NH₄PF₆ produces the PF₆^? salt of the (μ-hydrido)dicobalt cation [(C₅H₅Co)₂(μ-H)(μ-PMe₂)₂]⁺ (V) which reacts with aqueous NaOH to give II. Similar treatment of [C₅H₅Co(μ-SMe]₂ with CF₃CO₂H/NH₄PF₆ leads to the formation of [(C₅H₅Co)₂(μ-SMe)₃]PF₆ (VI). The nucleophilic character of complex II has also been demonstrated in the reaction with SO₂, which gives [(C₅H₅Co)₂ (μ-PMe₂)₂(μ-SO₂)] (VII). The crystal and molecular structures of II, the corresponding bis(μ-diphenylphosphido) compound [C₅H₅Co(μ-PPh₂)]₂ (III) and the BPh₄^? salt of V have been determined. In both neutral complexes the Co₂P₂ cores are similarly puckered, as reflected in the dihedral angle between the CoP₂ and P₂Co′ planes of 108.1 and 105.0° for R = Me and Ph, respectively. The CoCo bond length and the PP interatomic separations are essentially identical for both dimers. The CoCo bond length in V, 2.517(1) Å, is lower than that in II, 2.542(2) Å. The only obvious structural variation between the unprotonated and the protonated species is the large difference in the degree of canting of the C₅H₅ rings with respect to each other. The angles between the C₅(ring)-centroid and the CoCo line are ca. 150 and 167° in II and V, respectively, which reflects the influence of the bridging hydride ligand in the cationic complex.     

Alkynyl derivatives of gold complexes containing C6H3-5-Me-2-EPh2 (E = P, As) ligands

[Au₂Cl₂{μ-2,2′-Ph₂As(5,5′-Me₂C₆H₃C₆H₃)AsPh₂}] reacts with phenylacetylene or ethynylferrocene to give the corresponding digold(I) bis(alkynyl) derivatives [Au₂(CCR)₂{μ-2,2′-Ph₂As(5,5′-Me₂C₆H₃C₆H₃)AsPh₂}] [R = Ph (4), Fc (5)]. In contrast, products resulting from the reaction with 1,3- or 1,4-diethynylbenzene (deb) depend markedly on the dichlorodigold(I) complex to ligand ratio. When an excess of alkyne is used, the expected bis(alkynyl) complexes [Au₂X₂{μ-2,2′-Ph₂As(5,5′-Me₂C₆H₃C₆H₃)AsPh₂}] [X = 1,3-deb (6), 1,4-deb (7)] are obtained, but when using a 1:1 molar ratio poorly soluble, presumably polymeric, species are formed. Attempts to prepare a digold(II) bis(alkynyl) derivative by treatment of [Au₂Cl₂(μ-C₆H₃-5-Me-2-PPh₂)₂] with ethynylferrocene in the presence of NaOMe gives a mixture of species, the recrystallization of which yielded a crystal of [{2-(FcCC)-4-MeC₆H₃PPh₂}Au(CCFc)] (1). The reaction of [Au₂Cl₂(μ-C₆H₃-5-Me-2-AsPh₂)₂] with phenylacetylene, 1,3- or 1,4-deb gives a mixture of unidentified products.