An amide-based second coordination sphere promotes the dimer pathway of Mn-catalyzed CO2-to-CO reduction at low overpotential

The [fac-Mn(bpy)(CO)₃Br] complex is capable of catalyzing the electrochemical reduction of CO₂ to CO with high selectivity, moderate activity and large overpotential. Several attempts have been made to lower the overpotential and to enhance the catalytic activity of this complex by manipulating the second-coordination sphere of manganese and using relatively stronger acids to promote the protonation-first pathway. We report herein that the complex [fac-Mn(bpy-CONHMe)(CO)₃(MeCN)]⁺ ([1-MeCN]⁺; bpy-CONHMe = N-methyl-(2,2′-bipyridine)-6-carboxamide) as a pre-catalyst could catalyze the electrochemical reduction of CO₂ to CO with low overpotential and high activity and selectivity. Combined experimental and computational studies reveal that the amide NH group not only decreases the overpotential of the Mn catalyst by promoting the dimer and protonation-first pathways in the presence of H₂O but also enhances the CO₂ electroreduction activity by facilitating C–OH bond cleavage, making [1-MeCN]⁺ an efficient CO₂ reduction pre-catalyst at low overpotential.

The amide NH group decreases the overpotential of Mn-based CO₂ reduction catalysts by promoting the dimer and protonation-first pathways in the presence of H₂O and enhances the CO₂ electroreduction activity by facilitating C–OH bond cleavage.     

Selective electrochemical reduction of carbon dioxide to ethanol via a relay catalytic platform

Efficient electroreduction of carbon dioxide (CO₂) to ethanol is of great importance, but remains a challenge because it involves the transfer of multiple proton–electron pairs and carbon–carbon coupling. Herein, we report a CoO-anchored N-doped carbon material composed of mesoporous carbon (MC) and carbon nanotubes (CNT) as a catalyst for CO₂ electroreduction. The faradaic efficiencies of ethanol and current density reached 60.1% and 5.1 mA cm⁻², respectively. Moreover, the selectivity for ethanol products was extremely high among the products produced from CO₂. A proposed mechanism is discussed in which the MC–CNT/Co catalyst provides a relay catalytic platform, where CoO catalyzes the formation of CO* intermediates which spill over to MC–CNT for carbon–carbon coupling to form ethanol. The high selectivity for ethanol is attributed mainly to the highly selective carbon–carbon coupling active sites on MC–CNT.

The relay catalytic platform is very efficient and selective for CO₂ electroreduction to ethanol.     

CO2 Absorption Mechanism by the Nonaqueous Solvent Consisting of Hindered Amine 2-[(1,1-dimethylethyl)amino]ethanol and Ethylene Glycol

In this work, we studied the CO₂ absorption mechanism by nonaqueous solvent comprising hindered amine 2-[(1,1-dimethylethyl)amino]ethanol (TBAE) and ethylene glycol (EG). The NMR and FTIR results indicated that CO₂ reacted with an -OH group of EG rather than the -OH of TBAE by producing hydroxyethyl carbonate species. A possible reaction pathway was suggested, which involves two steps. In the first step, the acid–base reaction between TBAE and EG generated the anion HO-CH₂-CH₂-O-; in the second step, the O⁻ of HO-CH₂-CH₂-O⁻ attacked the C atom of CO₂, forming carbonate species.     

Non-metal boron atoms on a CuB12 monolayer as efficient catalytic sites for urea production

An electrocatalytic C–N coupling reaction to convert CO₂ and N₂ into urea under mild conditions has been proposed to be a promising alternative experimentally, but the development of highly stable, low-cost and high-performance non-metal catalytic sites remains rare and challenging. Herein, a global-minimum CuB₁₂ monolayer with superior stability has been identified based on first-principles computations, and the most significant finding is that the CuB₁₂ monolayer possesses the best catalytic activity among the reported urea catalysts thermodynamically and kinetically. All possible reaction pathways to form urea (NH₂CONH₂) starting from the CO₂ molecule and N₂ molecule, including the CO₂ pathway, OCOH pathway, CO pathway, NCON pathway and mixed pathway, as well as the kinetic energy barriers of six possible C–N coupling reactions are systematically investigated. Non-metal B atoms at the midpoint of the edges of the squares act as excellent catalytic sites with a limiting potential of urea production of 0.23 V through the CO₂ pathway and OCOH pathway and the lowest kinetic energy barrier of C–N bond formation (0.54 eV) through the reaction *CO + *NHNH → *NHCONH. Therefore, this study not only identifies the first non-metal B catalytic sites for urea formation, but also perfects the reaction mechanism to convert CO₂ and N₂ into urea, which could provide great guiding significance to explore other high-performance urea catalysts.

Non-metal B atoms at the midpoint of the edges of the squares is confirmed to be the excellent catalytic sites on CuB₁₂ monolayer presents superior catalytic activity thermodynamically and kinetically than the reported urea catalysts.     

Favoring CO Intermediate Stabilization and Protonation by Crown Ether for CO2 Electromethanation in Acidic Media

The large-scale deployment of CO₂ electroreduction is hampered by deficient carbon utilization in neutral and alkaline electrolytes due to CO₂ loss into (bi)carbonates. Switching to acidic media mitigates carbonation, but suffers from low product selectivity because of hydrogen evolution. Here we report a crown ether decoration strategy on a Cu catalyst to enhance carbon utilization and selectivity of CO₂ methanation under acidic conditions. Macrocyclic 18-Crown-6 is found to enrich potassium cations near the Cu electrode surface, simultaneously enhancing the interfacial electric field to stabilize the *CO intermediate and accelerate water dissociation to boost *CO protonation. Remarkably, the mixture of 18-Crown-6 and Cu nanoparticles affords a CH₄ Faradaic efficiency of 51.2 % and a single pass carbon efficiency of 43.0 % toward CO₂ electroreduction in electrolyte with pH=2. This study provides a facile strategy to promote CH₄ selectivity and carbon utilization by modifying Cu catalysts with supramolecules.     

Iron-catalyzed α-C–H functionalization of π-bonds: cross-dehydrogenative coupling and mechanistic insights

The deprotonation of propargylic C–H bonds for subsequent functionalization typically requires stoichiometric metal alkyl or amide reagents. In addition to the undesirable generation of stoichiometric metallic waste, these conditions limit the functional group compatibility and versatility of this functionalization strategy and often result in regioisomeric mixtures. In this article, we report the use of dicarbonyl cyclopentadienyliron(ii) complexes for the generation of propargylic anion equivalents toward the direct electrophilic functionalization of propargylic C–H bonds under mild, catalytic conditions. This technology was applied to the direct conversion of C–H bonds to C–C bonds for the synthesis of several functionalized scaffolds through a one-pot cross dehydrogenative coupling reaction with tetrahydroisoquinoline and related privileged heterocyclic scaffolds. A series of NMR studies and deuterium-labelling experiments indicated that the deprotonation of the propargylic C–H bond was the rate-determining step when a Cp*Fe(CO)₂-based catalyst system was employed.

[Cp*Fe(CO)₂]⁺ facilitates the α-deprotonation of unsaturated C–C bond for propargylic and allylic C–H functionalization. Mechanistic studies reveal insights into the superior performance of the electron-rich and hindered ligand on iron.     

Electrochemical C–N coupling with perovskite hybrids toward efficient urea synthesis

Electrocatalytic C–N coupling reaction by co-activation of both N₂ and CO₂ molecules under ambient conditions to synthesize valuable urea opens a new avenue for sustainable development, while the actual catalytic activity is limited by poor adsorption and coupling capability of gas molecules on the catalyst surface. Herein, theoretical calculation predicts that the well-developed built-in electric field in perovskite hetero-structured BiFeO₃/BiVO₄ hybrids can accelerate the local charge redistribution and thus promote the targeted adsorption and activation of inert N₂ and CO₂ molecules on the generated local electrophilic and nucleophilic regions. Thus, a BiFeO₃/BiVO₄ heterojunction is designed and synthesized, which delivers a urea yield rate of 4.94 mmol h⁻¹ g⁻¹ with a faradaic efficiency of 17.18% at −0.4 V vs. RHE in 0.1 M KHCO₃, outperforming the highest values reported as far. The comprehensive analysis further confirms that the local charge redistribution in the heterojunction effectively suppresses CO poisoning and the formation of the endothermic *NNH intermediate, which thus guarantees the exothermic coupling of *N N* intermediates with the generated CO via C–N coupling reactions to form the urea precursor *NCON* intermediate. This work opens a new avenue for effective electrocatalytic C–N coupling under ambient conditions.

The local charge redistribution in BiFeO₃/BiVO₄ hybrids promotes the targeted adsorption and activation of inert gas molecules and guarantees the exothermic coupling of *N N* with generated CO via C–N coupling reactions to form *NCON* precursor.     

Low temperature methanation of CO2 over an amorphous cobalt-based catalyst

CO₂ methanation is an important reaction in CO₂ valorization. Because of the high kinetic barriers, the reaction usually needs to proceed at higher temperature (>300 °C). High-efficiency CO₂ methanation at low temperature (<200 °C) is an interesting topic, and only several noble metal catalysts were reported to achieve this goal. Currently, design of cheap metal catalysts that can effectively accelerate this reaction at low temperature is still a challenge. In this work, we found that the amorphous Co–Zr_0.1–B–O catalyst could catalyze the reaction at above 140 °C. The activity of the catalyst at 180 °C reached 10.7 mmol_CO2 g_cat⁻¹ h⁻¹, which is comparable to or even higher than that of some noble metal catalysts under similar conditions. The Zr promoter in this work had the highest promoting factor to date among the catalysts for CO₂ methanation. As far as we know, this is the first report of an amorphous transition metal catalyst that could effectively accelerate CO₂ methanation. The outstanding performance of the catalyst could be ascribed to two aspects. The amorphous nature of the catalyst offered abundant surface defects and intrinsic active sites. On the other hand, the Zr promoter could enlarge the surface area of the catalyst, enrich the Co atoms on the catalyst surface, and tune the valence state of the atoms at the catalyst surface. The reaction mechanism was proposed based on the control experiments.

It is discovered that an amorphous transition metal catalyst Co–Zr0.1–B–O could effectively accelerate CO2 methanation, at a rate that is comparable to or even higher than that of some noble metal catalysts under similar conditions.     

Effect of Ethylene Glycol and Its Oligomers on the Copper(II) Electroreduction Kinetics in Halide-Containing Acid Sulfate Solutions

The kinetics of the copper electroreduction in acid sulfate solutions containing ethylene glycol derivatives (EG) with the common formula HO-(CH₂-CH₂-O)_m-H is studied by means of voltammetry and impedance spectroscopy. All the EG (m≤6) display weak surface activity and barely effect the cathodic kinetics in the absence of halides. Halides can initiate inhibiting adsorption of EG only when the number of ether oxygen atoms in them is 3 (m ≤ 4), by inhibiting the first-electron transfer onto ions Cu²⁺. These effects are discussed invoking notions on the formation of pseudocrown structures in the adsorption layer.     

Electroreduction of CO2 on Single‐Site Copper‐Nitrogen‐Doped Carbon Material: Selective Formation of Ethanol and Reversible Restructuration of the Metal Sites

It is generally believed that CO₂ electroreduction to multi‐carbon products such as ethanol or ethylene may be catalyzed with significant yield only on metallic copper surfaces, implying large ensembles of copper atoms. Here, we report on an inexpensive Cu‐N‐C material prepared via a simple pyrolytic route that exclusively feature single copper atoms with a CuN₄ coordination environment, atomically dispersed in a nitrogen‐doped conductive carbon matrix. This material achieves aqueous CO₂ electroreduction to ethanol at a Faradaic yield of 55 % under optimized conditions (electrolyte: 0.1 m CsHCO₃, potential: ?1.2 V vs. RHE and gas‐phase recycling set up), as well as CO electroreduction to C₂‐products (ethanol and ethylene) with a Faradaic yield of 80 %. During electrolysis the isolated sites transiently convert into metallic copper nanoparticles, as shown by operando XAS analysis, which are likely to be the catalytically active species. Remarkably, this process is reversible and the initial material is recovered intact after electrolysis.     

The Influence of Hydrogen Bond Donors on the CO2 Absorption Mechanism by the Bio-Phenol-Based Deep Eutectic Solvents

Recently, deep eutectic solvents (DESs), a new type of solvent, have been studied widely for CO₂ capture. In this work, the anion-functionalized deep eutectic solvents composed of phenol-based ionic liquids (ILs) and hydrogen bond donors (HBDs) ethylene glycol (EG) or 4-methylimidazole (4CH₃-Im) were synthesized for CO₂ capture. The phenol-based ILs used in this study were prepared from bio-derived phenols carvacrol (Car) and thymol (Thy). The CO₂ absorption capacities of the DESs were determined. The absorption mechanisms by the DESs were also studied using nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR), and mass spectroscopy. Interestingly, the results indicated that CO₂ reacted with both the phenolic anions and EG, generating the phenol-based carbonates and the EG-based carbonates, when CO₂ interacted with the DESs formed by the ILs and EG. However, CO₂ only reacted with the phenolic anions when the DESs formed by the ILs and 4CH₃-Im. The results indicated that the HBDs impacted greatly on the CO₂ absorption mechanism, suggesting the mechanism can be tuned by changing the HBDs, and the different reaction pathways may be due to the steric hinderance differences of the functional groups of the HBDs.     

Quasi-square-shaped cadmium hydroxide nanocatalysts for electrochemical CO2 reduction with high efficiency

Powered by a renewable electricity source, electrochemical CO₂ reduction reaction is a promising solution to facilitate the carbon balance. However, it is still a challenge to achieve a desired product with commercial current density and high efficiency. Herein we designed quasi-square-shaped cadmium hydroxide nanocatalysts for CO₂ electroreduction to CO. It was discovered that the catalyst is very active and selective for the reaction. The current density could be as high as 200 mA cm⁻² with a nearly 100% selectivity in a commonly used H-type cell using the ionic liquid-based electrolyte. In addition, the faradaic efficiency of CO could reach 90% at a very low overpotential of 100 mV. Density functional theory studies and control experiments reveal that the outstanding performance of the catalyst was attributed to its unique structure. It not only provides low Cd–O coordination, but also exposes high activity (002) facet, which requires lower energy for the formation of CO. Besides, the high concentration of CO can be achieved from the low concentration CO₂via an adsorption-electrolysis device.

Quasi-square cadmium hydroxide nanocrystals (Cdhy-QS) showed outstanding performance for electroreduction CO₂ to CO.     

Fast oxygen ion migration in Cu–In–oxide bulk and its utilization for effective CO2 conversion at lower temperature

Efficient activation of CO₂ at low temperature was achieved by reverse water–gas shift via chemical looping (RWGS-CL) by virtue of fast oxygen ion migration in a Cu–In structured oxide, even at lower temperatures. Results show that a novel Cu–In₂O₃ structured oxide can show a remarkably higher CO₂ splitting rate than ever reported. Various analyses revealed that RWGS-CL on Cu–In₂O₃ is derived from redox between Cu–In₂O₃ and Cu–In alloy. Key factors for high CO₂ splitting rate were fast migration of oxide ions in the alloy and the preferential oxidation of the interface of alloy–In₂O₃ in the bulk of the particles. The findings reported herein can open up new avenues to achieve effective CO₂ conversion at lower temperatures.

Efficient activation of CO₂ at low temperature was achieved by reverse water–gas shift via chemical looping (RWGS-CL) by virtue of fast oxygen ion migration in a Cu–In structured oxide, even at lower temperatures.     

Atomically Precise Copper Nanoclusters for Highly Efficient Electroreduction of CO2 towards Hydrocarbons via Breaking the Coordination Symmetry of Cu Site

We propose an effective highest occupied d-orbital modulation strategy engendered by breaking the coordination symmetry of sites in the atomically precise Cu nanocluster (NC) to switch the product of CO₂ electroreduction from HCOOH/CO to higher-valued hydrocarbons. An atomically well-defined Cu₆ NC with symmetry-broken Cu−S₂N₁ active sites (named Cu₆(MBD)₆, MBD=2-mercaptobenzimidazole) was designed and synthesized by a judicious choice of ligand containing both S and N coordination atoms. Different from the previously reported high HCOOH selectivity of Cu NCs with Cu−S₃ sites, the Cu₆(MBD)₆ with Cu−S₂N₁ coordination structure shows a high Faradaic efficiency toward hydrocarbons of 65.5 % at −1.4 V versus the reversible hydrogen electrode (including 42.5 % CH₄ and 23 % C₂H₄), with the hydrocarbons partial current density of −183.4 mA cm⁻². Theoretical calculations reveal that the symmetry-broken Cu−S₂N₁ sites can rearrange the Cu 3d orbitals with as the highest occupied d-orbital, thus favoring the generation of key intermediate *COOH instead of *OCHO to favor *CO formation, followed by hydrogenation and/or C−C coupling to produce hydrocarbons. This is the first attempt to regulate the coordination mode of Cu atom in Cu NCs for hydrocarbons generation, and provides new inspiration for designing atomically precise NCs for efficient CO₂RR towards highly-valued products.     

Reversible addition of ethylene to a pincer-based boryl-iridium unit with the formation of a bridging ethylidene

This report examines reactions of a series of Ir complexes supported by the diarylboryl/bis(phosphine) PBP pincer ligand with ethylene: (PBP)IrH₄ (1), (PBP)IrH₂(CO) (2), and (PBP)Ir(CO)₂ (3). The outcomes of these reactions differ from those typical for Ir complexes supported by other pincer ligands and do not give rise to simple ethylene adducts or products of insertion of Ir into the C–H bond of ethylene. Instead, the elements of ethylene are incorporated into the molecules to result in B–C bonds. In the case of 2 and 3, ethylene addition results in the formation of B/Ir bridging ethylidene complexes 5 and 6. For 6, the addition of ethylene (and the analogous addition of 1-hexene) is shown to be partially reversible. Addition of ethylene to 2 and 3 is remarkable because they are saturated at Ir and yet the net outcome is such that ethylene binds without replacing any ligands already present. A mechanistic inquiry suggests that dissociation of CO from 3 or 6 is necessary in order for the addition or loss of ethylene to proceed.

(PBP)Ir pincer complexes containing a boryl-iridium linkage reversibly bind ethylene as an ethylidene bridging B and Ir.     

H2-induced CO adsorption and dissociation over Co/Al2O3 catalyst

The activation of adsorbed CO is an important step in CO hydrogenation. The results from TPSR of pre-adsorbed CO with H2 and syngas suggested that the presence of H2 increased the amount of CO adsorption and accelerated CO dissociation. The H2 was adsorbed first, and activated to form H＊ over metal sites, then reacted with carbonaceous species. The oxygen species for CO2 formation in the presence of hydrogen was mostly OH^＊, which reacted with adsorbed CO subsequently via CO^＊＋OH^＊ → CO2^＊＋H^＊; however, the direct CO dissociation was not excluded in CO hydrogenation. The dissociation of C-O bond in the presence of H2 proceeded by a concerted mechanism, which assisted the Boudourd reaction of adsorbed CO on the surface via CO^＊＋2H^＊ → CH^＊＋OH^＊. The formation of the surface species （CH） from adsorbed CO proceeded as indicated with the participation of surface hydrogen, was favored in the initial step of the Fischer-Tropsch synthesis.     

Highly Selective Electrochemical Reduction of CO2 to Alcohols on an FeP Nanoarray

Electrochemical reduction of CO₂ into various chemicals and fuels provides an attractive pathway for environmental and energy sustainability. It is now shown that a FeP nanoarray on Ti mesh (FeP NA/TM) acts as an efficient 3D catalyst electrode for the CO₂ reduction reaction to convert CO₂ into alcohols with high selectivity. In 0.5 m KHCO₃, such FeP NA/TM is capable of achieving a high Faradaic efficiency (FE ) up to 80.2 %, with a total FE of 94.3 % at ?0.20 V vs. reversible hydrogen electrode. Density functional theory calculations reveal that the FeP(211) surface significantly promotes the adsorption and reduction of CO₂ toward CH₃OH owing to the synergistic effect of two adjacent Fe atoms, and the potential‐determining step is the hydrogenation process of *CO.     

Topological engineering of two-dimensional ionic liquid islands for high structural stability and CO2 adsorption selectivity

Ionic liquids (ILs) as green solvents and catalysts are highly attractive in the field of chemistry and chemical engineering. Their interfacial assembly structure and function are still far less well understood. Herein, we use coupling first-principles and molecular dynamics simulations to resolve the structure, properties, and function of ILs deposited on the graphite surface. Four different subunits driven by hydrogen bonds are identified first, and can assemble into close-packed and sparsely arranged annular 2D IL islands (2DIIs). Meanwhile, we found that the formation energy and HOMO–LUMO gap decrease exponentially as the island size increases via simulating a series of 2DIIs with different topological features. However, once the size is beyond the critical value, both the structural stability and electrical structure converge. Furthermore, the island edges are found to be dominant adsorption sites for CO₂ and better than other pure metal surfaces, showing an ultrahigh adsorption selectivity (up to 99.7%) for CO₂ compared with CH₄, CO, or N₂. Such quantitative structure–function relations of 2DIIs are meaningful for engineering ILs to efficiently promote their applications, such as the capture and conversion of CO₂.

Multi-scale simulations reveal the structure and properties of the two-dimensional ionic liquid islands supported by graphite, and the island edges show an ultrahigh adsorption selectivity for CO₂ compared with CH₄, CO, or N₂.     

Regulation of Coordination Number over Single Co Sites: Triggering the Efficient Electroreduction of CO2

The design of active, selective, and stable CO₂ reduction electrocatalysts is still challenging. A series of atomically dispersed Co catalysts with different nitrogen coordination numbers were prepared and their CO₂ electroreduction catalytic performance was explored. The best catalyst, atomically dispersed Co with two‐coordinate nitrogen atoms, achieves both high selectivity and superior activity with 94 % CO formation Faradaic efficiency and a current density of 18.1 mA cm^?2 at an overpotential of 520 mV. The CO formation turnover frequency reaches a record value of 18 200 h^?1, surpassing most reported metal‐based catalysts under comparable conditions. Our experimental and theoretical results demonstrate that lower a coordination number facilitates activation of CO₂ to the CO₂^.? intermediate and hence enhances CO₂ electroreduction activity.