Triethylamine-catalyzed one-pot synthesis of trithiocarbonates from carbon disulfide, thiols, and alkyl halides in water

Symmetrical and unsymmetrical trithiocarbonates were prepared by a simple and efficient one-pot reaction of thiols, carbon disulfide, and alkyl halides in the presence of triethylamine in water at room temperature. Correspondence: Barahman Movassagh, Department of Chemistry, K.N. Toosi University of Technology, P.O. Box 16315–1618, Tehran, Iran.     

A novel and efficient synthesis of alkyl thiocyanates from alkyl halides in water using phase transfer catalysts

1,4-Bis(triphenylphosphonium)-2-butene dichloride(BTPBDC) and 1,4-bis(triphenyl phosphonium)-2-butene dithiocyanate (BTPBDT) were prepared and used as phase-transfer catalysts.Alkyl halides were converted efficiently to the corresponding alkyl thiocyanates under mild reaction conditions in water.No evidence for the formation of isothiocyanates as by-product of the reaction was observed.     

A novel dual-nano assisted synthesis of symmetrical disulfides from aryl/alkyl halides

Here, we have reported a novel approach towards dual-nano assisted synthesis of disulfides from coupling of alkyl/aryl halides and sulfur nanoparticles. The indium oxide nanoparticles as catalyst expedite the conversion and sulfur nanoparticle notably enhances the miscibility, providing a faster, high yielding and cost-effective process in ethanol-water system. The method has synthetic advantages in terms of mild reaction framework, catalyst regeneration, and absence of any sulfide or polysulfide linkage as by-product leading to a column free synthesis. A variety of alkyl, aryl and heteroaryl symmetrical disulfides are obtained in good to excellent yields up to exceeding 98%.     

Catalytic synthesis of dimethyl sulfide from dimethyl disulfide and methanol

The reaction of dimethyl disulfide with methanol was studied at atmospheric pressure and temperature of 350°C in the presence of catalysts containing acid and basic sites.     

A simple,efficient synthesis of lenthionine and 1,2,4,6-tetrathiepane from dimethyl disulfide

A synthetic route to the important cyclic polysulfide, lenthlonine, and a related natural product is outlined.     

A safe and mild synthesis of organic carbonates from alkyl halides and tetrabutylammonium alkyl carbonates

A safe and mild procedure for the synthesis of mixed organic carbonates is described. Reaction of commercially available tetrabutylammonium methoxide and ethoxide with carbon dioxide yields the corresponding methyl and ethyl tetrabutylammonium carbonates (TBAMC and TBAEC). The reactions of these new compounds with several different alkyl halides give methyl and ethyl carbonates in high yields. The use of classic toxic and harmful chemicals such as phosgene and carbon monoxide is avoided.     

Microwave-promoted solvent-free synthesis of N-(diphenylmethylene)glycine alkyl esters

The efficient synthesis of N-(diphenylmethylene) glycine alkyl esters was achieved for the first microwave irradiation under solvent-free condition,using PEG or quaternary ammonium salts as phase transfer catalysts(PTCs).Under the optimum conditions, N-(diphenylmethylene) glycine alkyl esters were obtained in excellent yields in most cases.     

A new reagent for the efficient synthesis of disulfides from alkyl halides

Benzyltriethylammonium tetracosathioheptamolybdate [(C₆H₅CH₂N(Et)₃)₆Mo₇S₂₄] has been found to be a superior sulfur transfer reagent for the conversion of alkyl halides to the corresponding disulfides in excellent yields under very mild reaction conditions.     

Synthesis of Te-alkyl carbamotelluroates from tellurium,carbon monoxide,amines, and alkyl halides

Lithium amides reacted with tellurium under atmospheric pressure of carbon monoxide to yield lithium carbamotelluroates which were trapped with alkyl halides to give Te-alkyl carbamotelluroates in good yields. Results of control experiments suggested that lithium carbamotelluroates were formed by the reaction of tellurium with carbamoyllithiums generated in situ from lithium amides and carbon monoxide. It was revealed also that yields were improved when tellurium was preliminarily treated with lithium amides prior to the introduction of carbon monoxide into the reaction media.     

Alkylation of salts ofN-(β-hydroxyalkyl)-N′-hydroxydiazeneN-oxides with alkyl halides and dimethyl sulfate

Salts ofN-(β-hydroxyalkyl)-N′-hydroxydiazeneN-oxides, RCH(OH)CH₂N(O)=NO⁻ M⁺ (R=Me, Prⁱ, or Bu^t; and M=Li, Na, K, Ag, NH₄, or Me₄N), were prepared. Their alkylation with alkyl halides R′X (X=Cl, Br, or I) and dimethyl sulfate was studied. Generally, alkylation afforded mixtures ofN-(β-hydroxyalkyl)-N′-alkoxydiazeneN-oxides RCH(OH)CH₂N(O)=NOR′ andO-alkyl-N-(β-hydroxyalkyl)-N-nitrosohydroxylamines RCH(OH)CH₂N(NO)OR′. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1996–2001, October, 1998.     

Functionalization of carbon dioxide and carbon disulfide using a stable uranium(III) alkyl complex

A rare uranium(III) alkyl complex, Tp*(2)U(CH(2)Ph) (2) (Tp* = hydrotris(3,5-dimethylpyrazolyl)borate), was synthesized by salt metathesis from Tp*(2)UI (1) and KCH(2)Ph and fully characterized using (1)H NMR, infrared, and electronic absorption spectroscopies as well as X-ray crystallography. This complex has a uranium-carbon distance of 2.57(2) ?, which is comparable to other uranium alkyls reported. Treating this compound with either carbon dioxide or carbon disulfide results in insertion into the uranium-carbon bond to generate Tp*(2)U(κ(2)-O(2)CCH(2)Ph) (3) and Tp*(2)U(SC(S)CH(2)Ph) (4), respectively. These species, characterized spectroscopically and by X-ray crystallography, feature new carboxylate and dithiocarboxylate ligands. Analysis by electronic absorption spectroscopy supports the trivalent oxidation state of the uranium center in both of these derivatives. Addition of trimethylsilylhalides (Me(3)SiX; X = Cl, I) to 3 results in the release of the free silyl ester, Me(3)SiOC(O)CH(2)Ph, forming the initial uranium monohalide species, Tp*(2)UX, which can then be used over multiple cycles for the functionalization of carbon dioxide.     

Synthesis of 2,5-disubstituted oxazoles from aldehydes and N-(tosylmethyl)imino synthons. Application to the synthesis of pimprinine analogues

A series of N-(tosylmethyl)imino compounds [TosCH₂N?C(L)A] has been applied to a new base-induced, one-operational synthesis of 2,5-disubstituted oxazoles from aromatic aldehydes. For substituent A of the imino compounds, which becomes the 2-substituent in the oxazoles, has been chosen methoxy, methyl and phenyl. The new method has been used also to synthesize seven pimprinine analogues, i.e., 5-(-3)indolyl)oxazoles.     

The rapid and efficient synthesis of disulfides from alkyl and acyl halides

Various symmetrical dialkyl and diacyl disulfides are prepared easily in high yields from the corresponding alkyl and acyl halides under mild and nonaqueous conditions using N,N′-dibutyl-N,N,N′,N′-tetramethyl-ethylenediammonium tetrahydroborate (BTMETB) or N,N′-dibenzyl-N,N,N′,N′-tetramethylethylenediammonium tetrahydroborate (BZTMETB) and elemental sulfur. The quaternary diammonium borohydrides were easily prepared by treatment of the corresponding quaternary diammonium chloride or bromide with alkaline solution of sodium borohydride at room temperature. Correspondence: Mahmood Tajbakhsh, Department of Chemistry, Mazandaran University, Babolsar, Iran.     

The rapid and efficient synthesis of disulfides from alkyl and acyl halides

Various symmetrical dialkyl and diacyl disulfides are prepared easily in high yields from the corresponding alkyl and acyl halides under mild and nonaqueous conditions using N,N′-dibutyl-N,N,N′,N′-tetramethyl-ethylenediammonium tetrahydroborate (BTMETB) or N,N′-dibenzyl-N,N,N′,N′-tetramethylethylenediammonium tetrahydroborate (BZTMETB) and elemental sulfur. The quaternary diammonium borohydrides were easily prepared by treatment of the corresponding quaternary diammonium chloride or bromide with alkaline solution of sodium borohydride at room temperature.     

A series of novel 2,6-bis(imino)pyridyl iron catalysts: synthesis, characterization and ethylene oligomerization

A series of novel 2,6-bis(imino)pyridyl iron complexes {2,6-(2-X-4-Y-5-ZC₆H₂NCCH₃)₂C₅H₃N}FeCl₂ (X = Cl, Y = CH₃, Z = H (2); X = Br, Y = CH₃, Z = H (3); X = F, Y = H, Z = CH₃ (4); X = Cl, Y = H, Z = CH₃ (5); X = Cl, Y = F (7)) have been synthesized and characterized with elemental analysis and IR. These iron coordinative complexes, activated with methylaluminoxane (MAO), lead to highly active ethylene oligomerization (>10⁷ g/mol Fe h) and the products are mostly linear α-olefins (>90%). The catalytic activities and product properties depend on the substituents on aryl rings and the reaction conditions. As reaction temperature increases, the catalytic activities decrease rapidly and more low-molar-mass products are produced. The product distributions are almost independent of the Al/Fe molar ratio, but the catalytic activities change in different trends when the ortho-substituents on the aryl rings are different. The other three complexes have also been synthesized for comparison to investigate the steric hindrance and electronic effect on the properties of complexes. The complex with adaptable steric hindrance and electronic properties exhibits the highest catalytic activities.     

Copolymerization of carbon disulfide and N-(β-cyanoethyl)ethylenimine

It was found that carbon disulfide copolymerizes with N-(β-cyanoethyl) ethylenimine by using water as a catalyst. The copolymerization was conducted in detail by using water as a catalyst in the temperature range between 0 and 50°C with various initial concentrations of carbon disulfide and N-(β-cyanoethyl)ethylenimine in the absence of solvent. The copolymer obtained was always composed of the two monomers: 1:1 ratio, independent of the initial concentration of the monomers. The copolymer was white solid material soluble in dimethyl sulfoxide, insoluble in other usual organic solvents and decomposed at 155°C. Spectroscopic analysis of the copolymer combined with the results of elemental analysis indicates that the copolymer had the following structure:      

Reactions of bis(tetrazole)phenylenes. Surprising formation of vinyl compounds from alkyl halides

The reactions of 1,2-bis(tetrazol-5-yl)benzene (1), 1,3-bis(tetrazol-5-yl)benzene (2), 1,4-bis(tetrazol-5-yl)benzene (3), 1,2-(Bu₃SnN₄C)₂C₆H₄ (4), 1,3-(Bu₃SnN₄C)₂C₆H₄ (5) and 1,4-(Bu₃SnN₄C)₂C₆H₄ (6) with 1,2-dibromoethane were carried out by two different methods in order to synthesise pendant alkyl halide derivatives of the parent bis-tetrazoles. This lead to the formation of several alkyl halide derivatives, substituted at either N1 or N2 on the tetrazole ring, as well as the surprising formation of several vinyl derivatives. The crystal structures of both 1,2-[(2-vinyl)tetrazol-5-yl)]benzene (1-N,2-N′) (1b) and 1,3-bis[(2-bromoethyl)tetrazol-5-yl]benzene (2-N,2-N′) (5d) are discussed.     

A novel synthesis of 2,3-dihydrooxazoles from dimethyl n-ethoxycarbonylmethyliminodithiocarbonate and aromatic aldehydes

We report the synthesis of 5-aryl-2-ethoxycarbonyl-4-methylthio-2,3-dihydrooxazoles from a cyclocondensation reaction betweeen dimethyl N-ethoxycarbonylmethyliminodithiocarbonate and aromatic aldehydes.     

A novel copper-catalyzed,one-pot synthesis of symmetric organic disulfides from alkyl and aryl halides: potassium 5-methyl-1,3,4-oxadiazole-2-thiolate as a novel sulfur transfer reagent

A new method is reported for the synthesis of symmetric diaryl and dialkyl disulfides from aryl and alkyl halides in the presence of copper using potassium 5-methyl-1,3,4-oxadiazole-2-thiolate as the base, ligand, and sulfur-transfer reagent.     

A novel stereoselective one-pot conversion of alcohols into alkyl halides mediated by N,N'-diisopropylcarbodiimide

Alcohols can be converted in high yields to the corresponding alkyl halides in a one-pot procedure via the corresponding O-alkylisourea; very short reaction times are possible when microwave irradiation is used.