SnS_2纳米材料的水热合成及光催化性质(英文)

在不同的表面活性剂和硫源的条件下,采用水热法制备了多种形貌的SnS2纳米材料,详细讨论了反应条件对其形貌和性质的影响,并采用X射线衍射(XRD)、扫描电镜(SEM)、和BET比表面积法对制备的样品的物相、形貌和组成进行了表征,通过光催化降解罗丹明B研究了所得样品的光催化性能。结果表明:表面活性剂和硫源对产物的结构和形貌起到了重要的作用。当Sn4+与表面活性剂的物质量的比为1∶1时,样品均为纯的六方相SnS2。采用柠檬酸三钠为表面活性剂、硫脲为硫源时制得的SnS2纳米片具有最大的比表面积,同时表现出了最优的光催化性能。     

聚合物保护贵金属纳米粒子的相转移技术

依据聚乙烯吡咯烷酮(PVP)在水中的溶解度随温度升高而降低的特性,建立了将PVP保护的金、银、铂纳米粒子从水相转移到油相的简单而有效的相转移技术.方法是利用电化学还原法先于水溶液中制备粒度均匀的金属纳米粒子,然后向电化学合成后的金属纳米水溶胶中加入适量正丁醇,在搅拌条件下升温至80℃即可使金属纳米粒子从水相转移至有机相.纳米粒子的相转移效率很高,而且相转移后粒子在油相中分散很好,没有团聚现象发生.在此基础上进一步建立在油水混合体系电化学合成金属纳米粒子的实验方法,为收集纳米粒子和制备纳米粒子薄膜提供了新的有效途径.     

油-水界面反应制备不同微/纳结构的系列金属硫化物

利用二硫化碳与水不混溶的特点,设计了油相为溶有单质硫的二硫化碳溶液、水相为金属盐水溶液的两相体系,在100 ℃溶剂热条件下发生反应,制备出具有不同微/纳结构的系列金属硫化物,如CdS、PbS和CuS枝晶、ZnS微米球和Ag₂S花生状纳米球结构等,证实了该合成方法具有通用性。通过X射线衍射(XRD)、透射电子显微镜(TEM)和场发射扫描电子显微镜(FE-SEM)等手段对产物进行成分与结构的表征,提出了油-水界面反应制备微/纳结构金属硫化物的可能机理,并用荧光分光光度计(PL)对产物的光学性质进行了研究。     

不完全相反转乳化过程分散相水滴形态发展研究

相反转乳化技术是制备高分子树脂水基分散体系的新方法[1～4].相反转指多组分体系(如油/水/乳化剂)中的连续相在一定条件下相互转化的过程,如在油/水/乳化剂体系中,其连续相由水相向油相(或从油相变为水相)的转变.在连续相转变区,体系的界面张力最低,因而分散相的尺寸最小.同理,可利用相反转技术直接将高分子树脂乳化为尺寸很小的水基微粒,即制备高分子树脂的水基分散体系.由于高分子树脂的粘弹性及相反转过程的复杂性,对高分子树脂的相反转乳化过程的机理研究较少.杨振忠[5]等通过调节高分子非离子型乳化剂浓度,可以有效地控制相反转完善程…     

界面交联制备聚多巴胺复合纳滤膜的性能调控

通过多巴胺在水溶液中的自聚-组装,形成聚多巴胺(PDA)纳米聚集体,进一步以尺寸可调的PDA纳米聚集体为水相反应物,以酰氯为油相单体,通过界面交联法制备了渗透选择性优异的复合纳滤膜,其分离性能可通过水相pH值进行调控.采用紫外吸收光谱和动态光散射等表征了PDA聚集体在水相中的结构特点,分析了复合膜表面的微观结构与物化性质.研究发现,随着水相pH值由中性(pH=6)向强碱性(pH=13)逐渐过渡,复合膜的Na_2SO_4截留率呈先增后减趋势.在水相pH=12时,制得的复合膜于0.4 MPa下纯水通量可达64 L m~(-2) h~(-1),Na_2SO_4的截留率达90%,对染料日落黄的截留率达97%.与文献报道的PDA表面沉积法相比,此方法大大缩短了PDA沉积时间,提高了制膜效率,所制备的复合纳滤膜分离性能可调.     

不同形貌和尺寸的锂离子电池SnS负极材料

通过高能球磨、微波辅助合成和化学合成方法制备不同形貌和不同尺寸的SnS材料. 运用X射线衍射和透射电镜对其结构和形貌进行分析. 在透射电镜下观察发现, 所得SnS材料呈现出纳米颗粒、层片和纳米棒状. 电化学测试结果表明, 高能球磨和化学合成(无表面活性剂加入)得到的SnS材料有较好的电化学性能, 在循环40个周期后仍分别有375和414 mAh·g-1 的电化学容量. 纳米级SnS电极材料良好的电化学性能有赖于其紧凑的纳米结构, 一定的形貌及合适的尺寸. 尽管非活性相Li2S可以帮助维持SnS电极在充放电过程中的稳定结构, 但SnS的形貌及尺寸才是获得良好电化学性能的SnS电极的关键因素.     

溶胶-凝胶法可控制备氧化锡纳米晶包覆碳纳米管

采用溶胶-凝胶法制备了氧化锡纳米晶包覆的碳纳米管。自由Sn4+离子从稳定的Sn柠檬酸配合物中缓慢释放出来,迁移到碳纳米管上,并在碳纳米管上沉积形成了SnO2纳米晶,沉积过程完全为异相成核方式,在碳纳米管外并没有发现单独的SnO2纳米晶。这种溶胶-凝胶方法还可以用来制备无氯离子污染的、低团聚的纯SnO2纳米晶。     

离子液体在多水相液液平衡体系中的作用

通过用短链离子液体(1-乙基-3-甲基咪唑溴盐[C2mim]Br、1-丁基-3-甲基咪唑溴盐[C4mim]Br)部分或全部取代SDS/DTAB/PEG/NaBr/H2O多水相体系中的无机盐NaBr,用长链离子液体十二烷基-3-甲基咪唑溴盐[C12mim]Br部分取代体系中阳离子表面活性剂DTAB,系统研究了离子液体在分相体系中的作用及其对分相体系性质的影响.研究表明,SDS/DTAB/PEG/NaBr/H2O混合体系形成的四水相体系可以看作"聚合物双水相"与"表面活性剂双水相"共存的结果.短链离子液体([C2mim]Br、[C4mim]Br)较强的亲水性能赋予其较强的盐析能力,在混合体系中表现出明显的盐效应,保证了四水相体系中"聚合物双水相"的存在.短链离子液体与聚合物之间的相互作用及其对表面活性剂之间相互作用的影响均不可忽略.对混合体系的相行为,共存多相的性质有重要的影响.而长链离子液体[C12mim]Br主要通过自身的疏水作用影响"表面活性剂双水相"的性质,充当表面活性剂的角色.然而,[C12mim]Br与DTAB分子结构上的差异,导致表面活性剂分子在"表面活性剂双水相"的两相重新分配,影响了对应两相的体积及萃取能力.可见,通过调节离子液体的烷基链长、混合体系中的含量等可获得具有特定性质的多水相体系.     

高速逆流色谱分离与鉴定牡荆化学成分

采用制备型高速逆流色谱与高效液相色谱联用的方法分离纯化牡荆中的活性化学成分.通过对溶剂系统和参数条件的优化,获得较好的分离条件.溶剂体系:氯仿-甲醇-水(体积比4:3:2),上相(水相)为固定相,下相(有机相)为流动相,正相洗脱;进样质量浓度20 g·L-1;流速2.0 mL·min-1;转速850 r·min-.进一...     

两相滴定法研究溶剂萃取机理的通用计算机程序

基于Marquardt-Fletcher改进的Gauss-Newton法,编写了1个从pH滴定结果计算酸性萃取剂在两相溶液中的分配常数、在水溶液中的电离常数及其金属络合物在水相和有机相中形成常数的通用计算机程序SCTPT。本程序能计算含有20个M_iA_iH_k型络合物存在的两相体系,对初值无严格要求,可在4～15个数量级内变化,并已用于PMBP--Cu²⁺,PMBPZn²⁺的苯-水体系,结果满意。     

New metal-rich sulfides Ni(6)SnS(2) and Ni(9)Sn(2)S(2) with a 2D metal framework: synthesis, crystal structure, and bonding

Two new, metal-rich nickel-tin sulfides Ni(6)SnS(2) and Ni(9)Sn(2)S(2) were found by establishing phase relations in the ternary Ni-Sn-S system at 540 degrees C. Their single crystals were prepared by means of chemical vapor transport reactions. Single crystal X-ray diffraction was used for the determination of their crystal structures. Both compounds crystallize in a tetragonal system (I4/mmm, No. 139, Z = 2, a = 3.646(1) A, c = 18.151(8) A for Ni(6)SnS(2), and a = 3.678(1) A, c = 25.527(8) A for Ni(9)Sn(2)S(2)). Their crystal structures represent a new structure type and can be considered as assembled from bimetallic nickel-tin and nickel-sulfide slabs alternating along the crystallographic c axis. DFT band structure calculations showed the bonding within the bimetallic slabs to have a delocalized, multicenter nature, typical for metallic systems, and predominantly classical, pairwise bonding between nickel and sulfur.     

First‐Principles Study of Na‐Ion Battery Performance and Reaction Mechanism of Tin Sulfide as Negative Electrode

We study the Na‐ion battery characteristics of SnS as a negative electrode by first‐principles calculations. From energy analyses, we clarify the discharge reaction process of the Na/SnS half‐cell system. We show a phase diagram of Na?Sn?S ternary systems by constructing convex‐hull curves, and show a possible reaction route considering intermediate products in discharge reactions. Voltage‐capacity curves are calculated based on the Na?SnS reaction path that is obtained from the ternary phase diagram. It is found that the conversion reactions and subsequently the alloying reactions proceed in the SnS electrode, contributing to its high capacity compared with the metallic Sn electrode, in which only the alloying reactions progresses stepwise. To verify the calculated reaction process, x‐ray absorption spectra (XAS) are calculated and compared with experimental XAS at S K‐edge, showing meaningful XAS changes associated with Na₂S and SnS in discharged and charged states, respectively.     

Self-assembly of luminescent Sn(IV)/Cu/S clusters using metal thiolates as metalloligands

Through the use of (Bu4N)2[Sn3S4(edt)3] (edt=SCH2CH2S(2-)) and Sn(SPh)4 as metalloligands, three neutral compounds have been obtained: [(Ph3P) 2Cu] 2SnS(edt)(2).2CH2Cl2.H2O (1a), [(Ph3P) 2Cu]2SnS(edt)2.2DMF.H2O (1b), and [(Ph3P)Cu] 2Sn(SPh)(6).3H 2O (2). Single-crystal X-ray diffraction studies revealed that compounds 1a and 1b contain the same neutral butterfly-like [(Ph3P)2Cu]2SnS(edt)2 cluster, which consists of one central SnS 5 dreich trigonal bipyramid sharing one vertex and two sides with two slightly distorted CuS 2P2 tetrahedrons. Compound 2 has a linear [(Ph3P)Cu]2Sn(SPh)6 cluster that is composed of a central distorted SnS 6 octahedron sharing two opposite planes with two slightly distorted CuS 3P tetrahedrons. Compound 1a exhibited an emission at 568 nm (tau=12.86 micros) in the solid state, while in CH 2Cl 2 solution, 1a exhibited a green emission at 534 nm (tau=4.75 micros). Compound 2 showed an intense red emission at 696 nm (tau=3.64 micros) upon excitation at 307 nm in the solid state.     

K2Ag6Sn3S10: a quaternary sulfide composed of silver sulfide layers pillared by zigzag chains 1infinity[SnS3]2-

A novel framework K(2)Ag(6)Sn(3)S(10) was synthesized solvothermally and characterized by single-crystal diffraction. The framework comprises [Ag(6)SnS(4)](2+) cationic layers pillared by [SnS(3)](2)(-) zigzag chains formed by vertex-sharing SnS(4) tetrahedra, and potassium ions are located in 1D channels. This compound crystallizes in the orthorhombic Pbcn space group with a = 24.0201(2) A, b = 6.4017(3) A, c = 13.3056(4) A, Z = 4. Its thermal and optical properties are studied.     

Formation of tin and lead molecular species in electrothermal atomizers

The vaporization of slurries of Sn and Pb compounds has been followed by the continuous collection of the absorption spectra of the vapour phase. In the case of Sn the formation of SnO(g) has been observed during the vaporization of Sn and SnO₂, and the formation of SnS(g) has been observed in the presence of CaSO₄ and FeS₂. In the case of Pb the only molecular species detected was PbS(g), that originated during the vaporization of PbSO₄ in the presence of CaSO₄. From the spectral data of the identified species, molecular absorption bands are selected to follow the vaporization process of each species at constant wavelength. The vaporization curves show that SnS(g) evolves before the appearance of Sn atomic vapours, but the formation of SnO(g) occurs contemporaneously with the appearance of the atomic vapours. The vaporization of PbS is slightly delayed in comparison with the formation of Pb atoms.     

Vapor Phase Synthesis of SnS Facilitated by Ligand-Driven “Launch Vehicle” Effect in Tin Precursors

Extraordinary low-temperature vapor-phase synthesis of SnS thin films from single molecular precursors is attractive over conventional high-temperature solid-state methods. Molecular-level processing of functional materials is accompanied by several intrinsic advantages such as precise control over stoichiometry, phase selective synthesis, and uniform substrate coverage. We report here on the synthesis of a new heteroleptic molecular precursor containing (i) a thiolate ligand forming a direct Sn-S bond, and (ii) a chelating O^N^N-donor ligand introducing a “launch vehicle”-effect into the synthesized compound, thus remarkably increasing its volatility. The newly synthesized tin compound [Sn(SBu^t)(tfb-dmeda)] 1 was characterized by single-crystal X-ray diffraction analysis that verified the desired Sn:S ratio in the molecule, which was demonstrated in the direct conversion of the molecular complex into SnS thin films. The multi-nuclei (¹H, ¹³C, ¹⁹F, and ¹¹⁹Sn) and variable-temperature 1D and 2D NMR studies indicate retention of the overall solid-state structure of 1 in the solution and suggest the presence of a dynamic conformational equilibrium. The fragmentation behavior of 1 was analyzed by mass spectrometry and compared with those of homoleptic tin tertiary butyl thiolates [Sn(SBu^t)₂] and [Sn(SBu^t)₄]. The precursor 1 was then used to deposit SnS thin films on different substrates (FTO, Mo-coated soda-lime glass) by CVD and film growth rates at different temperatures (300–450 °C) and times (15–60 min), film thickness, crystalline quality, and surface morphology were investigated.     

Unusual syntheses, structures, and electronic properties of compounds containing ternary, T3-type supertetrahedral M/Sn/S anions [M5Sn(mu3-S)4(SnS4)4](10- (M = Zn, Co)

A recently discovered series of quaternary compounds of the general type [K(m)(ROH)(n)()][M(x)Sn(y)()Se(z)] (R = H, Me), containing ternary anions with [SnSe(4)](4-)-coordinated transition metal centers (M = Co, Mn, Zn, Cd, Hg) has now been extended by the synthesis and characterization of the two ortho-thiostannate-coordinated species, [Na(10)(H(2)O)(32)][M(5)Sn(mu(3)-S)(4)(SnS(4))(4)].2H(2)O (M = Zn (1), Co (2)). The central structural motifs of compounds 1 and 2 are highly charged [M(5)Sn(mu(3)-S)(4)(SnS(4))(4)](10-) anions, being the first T3-type supertetrahedral ternary anions reported to date. The exposure of single crystals of 2 to a dynamic vacuum for several hours resulted in the reversible formation of a partially dehydrated, but still monocrystalline material of the composition [Na(10)(H(2)O)(6)][Co(5)Sn(mu(3)-S)(4)(SnS(4))(4)] (3). The loss of 28 of the 34 water molecules only slightly affects the internal structure of the ternary anion in 3 and leads to a significant compacting of the crystal structure with closer linkage of the [Co(5)Sn(5)S(20)](10-) cluster units via the Na(+) cations. Magnetic measurements on 3 show that the ground state of the Co/Sn/S cluster is S = 1/2, indicating a significant antiferromagnetic coupling between the Co centers, which has also been rationalized by DFT investigations of the electronic situation in the ternary subunits of 1-3.     

SnS薄膜的两步法制备及其光电性能研究

用两步法制备了SnS薄膜,首先在玻璃衬底上用磁控溅射法沉积一层Sn薄膜,然后在220℃下加热炉中硫化60 min.对该薄膜进行结构、表面形貌和光电性能分析,结果表明:制备的SnS薄膜为p型导电,有明显的(040)方向择优取向;薄膜表面致密,S和Sn原子非常接近化学计量比;薄膜呈现高于5×10⁴ cm^-1的吸收系数和持续光电导效应,其直接带隙约为1.23 eV,适合作为太阳能电池的吸收层材料和用于制作光敏器件.     

Syntheses and X-ray diffraction, photochemical, and optical characterization of Cu2SixSn1-xS3 (0.4 < or = x < or = 0.6) for photovoltaic applications

The study of the pseudobinary system Cu(2)SnS(3-)Cu(2)SiS(3) shows that a solid solution (Cu(2)Si(x)Sn(1-x)S(3)) exists in the range 0.4 < or = Si/(Sn+Si) < or = 0.6. Based on diffuse reflectance and photoelectrochemical measurements these compounds show potential as absorber materials for photovoltaic devices. The compounds were prepared at 850 degrees C from copper sulfide, silicon, tin, and sulfur and were analyzed with single-crystal (for x approximately 0.40) and powder diffraction techniques. Optical band gaps of 1.25, 1.35, and 1.45 eV were observed for the three compositions x = 0.39, 0.48, and 0.61; cathodic photocurrent occurring is significant.     

Phase behavior and phase-transfer catalysis of tetrabutylammonium salts. Interface-mediated catalysis

The phase behavior and component composition of the coexisting phases in the tetrabutylammonium bromide (TBABr)/benzene/water/NaBr four-component system were strongly influenced by the temperature, TBABr content, and NaBr concentration. The phase-transfer catalytic activity of TBABr for the reaction of decyl methanesulfonate with sodium bromide was closely related to the phase behavior. Under O (oil-rich phase) + L (TBABr-rich liquid phase) + W (aqueous phase) triphase conditions, the influences of temperature and stirring speed on the phase-transfer catalytic activity were small compared with those under O + W biphase conditions. The addition of other quaternary salts that were able to form w/o aggregates in the O phase enhanced the TBABr catalytic activity even under O + W conditions. The relationship between phase behavior and catalytic activity of tetrabutylammonium chloride or iodide (TBACl or TBAI) was also examined. The results strongly suggested that the catalysis of TBAX was attributable to the interfacial reactions of TBAX with the substrate. The interface includes the water-oil microinterface formed in the microemulsion-like L phase as well as the bulk water-oil interface.