Synthesis,Separation, and Characterization of Optically Pure C76 Mono-Adducts

Nucleophilic Bingel cyclopropanation of D₂-C₇₆ with bis[(S)-1-phenylbutyl] 2-bromomalonate in toluene in the presence of base yielded three constitutionally isomeric pairs of diastereoisomeric mono-adducts together with one other constitutional isomer. All seven mono-adducts were isolated in optically pure form by prep. HPLC on a (S,S)-Whelk-O1 chiral stationary phase. They represent the first optically pure adducts of an inherently chiral fullerene. Characterization by UV/VIS, CD, ¹³C- and ¹H-NMR spectroscopy allowed identification of pairs of stereoisomers and symmetry assignments: the two pairs of diastereoisomers which were isolated as the major product possess C₁ symmetry, whereas the third pair of diastereoisomers, which is a minor product, is C₂-symmetrical. The circular dichroism spectra of the optically active C₇₆-adducts showed very pronounced Cotton effects resulting from strong chiroptical contributions of the chiral fullerene chromophore with the maximum observed Δε values being twice as high than those previously measured for optically active adducts of achiral fullerenes with a chiral addition pattern. Whereas the regioselectivity of mono-additions to C₇₀ correlates with the degree of local bond curvature and the regioselectivity of multiple Bingel cyclopropanations of C₆₀ with electronic parameters such as coefficients of the lowest unoccupied molecular orbital (LUMO), no such simple predictive correlations exist for the nucleophilic addition to C₇₆. Despite full spectral characterization, an unambiguous structural assignment of the isolated compounds was not possible, except for the two C₂-symmetrical isomers. Based on considerations of local bond curvature and the previous experiences with the chemistry of C₇₀, the structures of the C₂-symmetrical stereoisomers were assigned as (S,S,^fC)- 3 and (S,S,^fA)- 3 , resulting from addition to the polar α-type C(1)? C(6) bond.     

Achiral and Chiral Higher Adducts of C70 by Bingel Cyclopropanation

Five optically active isomeric C₇₀ bis-adducts with (R)-configured chiral malonate addends were prepared by Bingel cyclopropanation (Scheme 1) and their circular dichroism (CD) spectra investigated in comparison to those of the corresponding five bis-adducts with (S)-configured addends (Fig. 2). Pairs of diastereoisomers, in which the inherently chiral addition patterns on the fullerene surface have an enantiomeric relationship, display mirror-image shaped CD spectra that are nearly identical to those of the corresponding pairs of enantiomers (Fig. 3, b and c). This result demonstrates that the Cotton effects arising from the chiral malonate addends are negligible as compared to the chiroptical contribution of the chirally functionalized fullerene chromophore. A series of four stereoisomeric tetrakis-adducts (Fig. 4) was prepared by Bingel cyclopropanation starting from four stereoisomeric bis-adducts. A comparison of the CD spectra of both series of compounds showed that the magnitude of the Cotton effects does not decrease with increasing degree of functionalization (Fig. 5). Bingel cyclopropanations of C₇₀ in Me₂SO are dramatically faster than in apolar solvents such as CCl₄, and the reaction of bis-adducts (±)- 13 and 15 with large excesses of diethyl 2-bromomalonate and DBU generated, via the intermediacy of defined tetrakis-adducts (±)- 16 and 17 , respectively, a series of higher adducts including hexakis-, heptakis-, and octakis-adducts (Table 1). A high regioselectivity was observed up to the stage of the hexakis-adducts, whereas this selectivity became much reduced at higher stages of addition. The regioselectivity of the nucleophilic cyclopropanations of C₇₀ correlates with the coefficients of the LUMO (lowest unoccupied molecular orbital) and LUMO+1 at the positions of preferential attack calculated by restricted Hartree-Fock – self-consistent field (RHF-SCF) methods (Figs. 9 – 11). Based on predictions from molecular-orbital calculations (Fig. 11) and the analysis of experimental ¹³C-NMR data (Fig. 7, a), the structure of a unique hexakis-adduct ((±)- 22 , Fig. 12), prepared from (±)- 13 , was assigned. The C₂-symmetrical compound contains four 6−6-closed methanofullerene sub-structures in its polar regions (at the bonds C(1)−C(2), C(31)−C(32), C(54)−C(55), and C(59)−C(60)), and two 6−5-open methanofullerene sub-structures parallel to the equator (at C(22)−C(23) and C(26)−C(27)). The 6−5-open sub-structures are formed by malonate additions to near-equatorial 6−5 bonds with enhanced LUMO coefficients, followed by valence isomerization (Fig. 12).     

Cyclophane-Type Fullerene-dibenzo[18]crown-6 Conjugates with trans-1, trans-2, and trans-3 Addition Patterns: Regioselective Templated Synthesis,X-Ray Crystal Structure,Ionophoric Properties,and Cation-Complexation-Dependent Redox Behavior

The fullerene-crown ether conjugates (±)- 1 to (±)- 3 with trans-1 ((±)- 1 ), trans-2 ((±)- 2 ), and trans-3 ((±)- 3 ) addition patterns on the C-sphere were prepared by Bingel macrocyclization. The trans-1 derivative (±)- 1 was obtained in 30% yield, together with a small amount of (±)- 2 by cyclization of the dibenzo[18]crown-6(DB18C6)-tethered bis-malonate 4 with C₆₀ (Scheme 1). When the crown-ether tether was further rigidified by K⁺-ion complexation, the yield and selectivity were greatly enhanced, and (±)- 1 was obtained as the only regioisomer in 50% yield. The macrocyclization, starting from a mixture of tethered bis-malonates with anti ( 4 ) and syn ( 10 ) bisfunctionalized DB18C6 moieties, afforded the trans-1 ((±)- 1 , 15%), trans-2 ((±)- 2 , 1.5%), and trans-3 ((±)- 3 , 20%) isomers (Scheme 2). Variable-temperature ¹H-NMR (VT-NMR) studies showed that the DB18C6 moiety in C₂-symmetrical (±)- 1 cannot rotate around the two arms fixing it to the C-sphere, even at 393 K. The planar chirality of (±)- 1 was confirmed in ¹H-NMR experiments using the potassium salts of (S)-1,1′-binaphthalene-2,2′-diyl phosphate ((+)-(S)- 19 ) or (+)-(1S)-camphor-10-sulfonic acid ((+)- 20 ) as chiral shift reagents (Fig. 1). The DB18C6 tether in (±)- 1 is a true covalent template: it is readily removed by hydrolysis or transesterification, which opens up new perspectives for molecular scaffolding using trans-1 fullerene derivatives. Characterization of the products 11 (Scheme 3) and 18 (Scheme 4) obtained by tether removal unambiguously confirmed the trans-1 addition pattern and the out-out geometry of (±)- 1 . VT-NMR Studies established that (±)- 2 is a C₂-symmetrical out-out trans-2 and (±)- 3 a C₁-symmetrical in-out trans-3 isomer. Upon changing from (±)- 1 to (±)- 3 , the distance between the DB18C6 moiety and the fullerene surface increases and, correspondingly, rotation of the ionophore becomes increasingly facile. The ionophoric properties of (±)- 1 were investigated with an ion-selective electrode membrane (Fig. 2 and Table 2), and K⁺ was found to form the most stable complex among the alkali-metal ions. The complex between (±)- 1 and KPF₆ was characterized by X-ray crystal-structure analysis (Figs. 3 and 4), which confirmed the close tangential orientation of the ionophore atop the fullerene surface. Addition of KPF₆ to a solution of (±)- 1 resulted in a large anodic shift (90 mV) of the first fullerene-centered reduction process, which is attributed to the electrostatic effect of the K⁺ ion bound in close proximity to the C-sphere (Fig. 5). Smaller anodic shifts were measured for the KPF₆ complexes of (±)- 2 (50 mV) and (±)- 3 (40 mV), in which the distance between ionophore and fullerene surface is increased (Table 3). The effects of different alkali- and alkaline-earth-metal ion salts on the redox properties of (±)- 1 were investigated (Table 4). These are the first-ever observed effects of cation complexation on the redox properties of the C-sphere in fullerene-crown ether conjugates.     

Hexakis‐Adducts of [60]Fullerene with Different Addition Patterns: Templated Synthesis,Physical Properties,and Chemical Reactivity

Representatives of two classes of hexakis‐adducts of C₆₀ were prepared by templated synthesis strategies. Compound 8 with a dipyridylmethano addend in a pseudo‐octahedral addition pattern was obtained by DMA‐templated addition (DMA=9,10‐dimethylanthracene; Scheme 1) and served as the starting material for the first supramolecular fullerene dimer 2 . Hexakis‐adduct 12 also possesses a pseudo‐octahedral addition pattern and was obtained by a sequence of tether‐directed remote functionalization, tether removal, and regioselective bis‐functionalization (Scheme 2). With its two diethynylmethano addends in trans‐1 position, it is a precursor for fascinating new oligomers and polymers that feature C₆₀ moieties as part of the polymeric backbone (Fig. 1). With the residual fullerene π‐electron chromophore reduced to a `cubic cyclophane'‐type sub‐structure (Fig. 4), and for steric reasons, 8 and 12 no longer display electrophilic reactivity. As a representative of the second class of hexakis‐adducts, (±)‐ 1 , which features six addends in a distinct helical array along an equatorial belt, was prepared by a route that involved two sequential tether‐directed remote functionalization steps (Schemes 3 and 5). In compound (±)‐ 1 , π‐electron conjugation between the two unsubstituted poles of the carbon sphere is maintained via two (E)‐stilbene‐like bridges (Fig. 4). As a result, (±)‐ 1 features very different chemical reactivity and physical properties when compared to hexakis‐adducts with a pseudo‐octahedral addition pattern. Its reduction under cyclic voltammetric conditions is greatly facilitated (by 570 mV), and it readily undergoes additional, electronically favored Bingel additions at the two sterically well‐accessible central polar 6‐6 bonds under formation of heptakis‐ and octakis‐adducts, (±)‐ 30 and (±)‐ 31 , respectively (Scheme 6). The different extent of the residual π‐electron delocalization in the fullerene sphere is also reflected in the optical properties of the two types of hexakis‐adducts. Whereas 8 and 12 are bright‐yellow (end‐absorption around 450 nm), compound (±)‐ 1 is shiny‐red, with an end‐absorption around 600 nm. This study once more demonstrates the power of templated functionalization strategies in fullerene chemistry, providing addition patterns that are not accessible by stepwise synthetic approaches.     

Macrocyclization on the fullerene core: Direct regio- and diastereoselective multi-functionalization of [60]fullerene,and synthesis of fullerene-dendrimer derivatives

The macrocyclization between buckminsterfullerene, C₆₀, and bis-malonate derivatives in double Bingel reaction provides a versatile and simple method for the preparation of covalent bis-adducts of C₆₀ with high regio- and diastereoselectivity. A combination of spectral analysis, stereochemical considerations, and X-ray crystallography (Fig. 2) revealed that out of the possible in-in, in-out, and out-out stereoisomers, the reaction of bis-malonates linked by o-, m-, or p-xylylene tethers afforded only the out-out ones (Scheme 1). In contrast, the use of larger tethers derived from 1,10-phenanthroline also provided a first example, (±)- 19 (Scheme 2), of an in-out product. Starting from optically pure bis-malonate derivatives, the new bis-functionalization method permitted the diastereoselective preparation of optically active fullerene derivatives (Schemes 4 and 5) and, ultimately, the enantioselective preparation (enantiomeric excess ee > 97%) of optically active cis-3 bis-adducts whose chirality results exclusively from the addition pattern (Fig. 6). The macrocyclic fixation of a bis-malonate with an optically active, 9,9′-spirobi[9H-fluorene]-derived tether to C₆₀ under generation of 24 and ent- 24 with an achiral addition pattern (Scheme 4) was found to induce dramatic changes in the chiroptical properties of the tether chromophore such as strong enhancement and reversal of sign of the Cotton effects in the circular dichroism (CD) spectra (Figs. 4 and 5). By the same method, the functionafized bis-adducts 50 and 51 (Schemes 10 and 11) were prepared as initiator cores for the synthesis of the fullerene dendrimers 62 , 63 , and 66 (Schemes 12 and 13) by convergent growth. Finally, the new methodology was extended, to the regio- and diastereoselective construction of higher cyclopropanated adducts. Starting from mono-adduct 71 , a clipping reaction provided exclusively the all-cis-2 tris-adduct (±)- 72 (Scheme 14), whereas the similar reaction of bis-adduct 76 afforded the all-cis-2 tetrakis-adduct 77 (Scheme 15). Electrochemical investigations by steady-state voltammetry (Table 2) in CH₂Cl₂ (+0.1M Bu₄NPF₆) showed that all macroeyciic bis(methano)fullerenes underwent multiple reduction steps, and that regioisomerism was not much influencing the redox potentials, All cis-2 bis-adducts gave an instable dianion which decomposed during the electrochemical reduction. In CH₂Cl₂, the redox potential of the fullerene core in dendrimers 62, 63 , and 66 is not affected by differences in size and density of the surrounding poly(ether-amide) dendrons. The all-cis-2 tris- and tetrakis(meihano)fullercnes (±) -72 and 77 , respectively, are reduced at more negative potential than previously reported all-e tris- and tetrakis-adducts with methane bridges that are also located along an equatorial belt. This indicates a larger perturbation of the original fullerene π-chromophore and a larger raise in LUMO energy in the former derivatives.     

Bis- through Tetrakis-Adducts of C60 by Reversible Tether-Directed Remote Functionalization and systematic investigation of the changes in fullerene properties as a function of degree,pattern, and nature of functionalization

By the tether-directed remote functionalization method, a series of bis- to hexakis-adducts of C₆₀, i.e., 1 – 7 (Fig. 1), had previously been prepared with high regioselectivity. An efficient method for the removal of the tether-reactive-group conjugate was now developed and its utility demonstrated in the regioselective synthesis of bis- to tetrakis(methano)fullerenes ( = di- to tetracyclopropafullerenes-C₆₀-I_h) 9 – 11 starting from 4, 5, and 7, respectively (Schemes 2, 4, and 5). This versatile protocol consists of a ¹O₂ ene reaction with the two cyclohexene rings in the starting materials, reduction of the formed mixture of isomeric allylic hydroperoxides to the corresponding alcohols, acid-promoted elimination of H₂O to cyclohexa-1,3-dienes, Diels-Alder addition of dimethyl acetylenedicarboxylate, retro-Diels-Alder addition, and, ultimately, transesterification. In the series 9 – 11 , all methano moieties are attached along an equatorial belt of the fullerene. Starting from C_2v-symmetrical tetrakis-adduct 15 , transesterification with dodecan-1-ol or octan-1-ol yielded the octaesters 16 and 17 , respectively, as noncrystalline fullerene derivatives (Scheme 3). The X-ray crystal structure of a CHCl₃ solvate of 11 (Fig. 3) showed that the residual conjugated π-chromophore of the C-sphere is reduced to two tetrabenzopyracylene substructures connected by four biphenyl-type bonds (Fig. 5). In the eight six-membered rings surrounding the two pyracylene (= cyclopent[fg]acenaphthylene) moieties, 6–6 and 6–5 bond-length alteration (0.05 Å) was reduced by ca. 0.01 Å as compared to the free C₆₀ skeleton (0.06 Å) (Fig. 4). The crystal packing (Fig. 6) revealed short contacts between Cl-atoms of the solvent molecule and sp²- and sp³-C-atoms of the C-sphere, as well as short contacts between Cl-atoms and O-atoms of the EtOOC groups attached to the methano moieties of 11 . The physical properties and chemical reactivity of compounds 1 - 11 were comprehensively investigated as a function of degree and pattern of addition and the nature of the addends. Methods applied to this study were UV/VIS (Figs. 7–11), IR, and NMR spectroscopy (Table 2), cyclic (CV) and steady-state (SSV) voltammetry (Table 1), calculations of the energies of the lowest uunoccupied mmolecular orbitals (LUMOs) and electron affinities (Figs. 12 and 13), and evaluation of chemical reactivity in competition experiments. It was found that the properties of the fullerene derivatives were not only affected by the degree and pattern of addition but also, in a remarkable way, by the nature of the addends (methano vs. but-2-ene-1, 4-diyl) anellated to the C-sphere. Attachment of multiple thano moieties along an equatorial belt as in the series 8 – 11 induces only a small perturbation of the original fullerene π-chromophore. In general, with increasing attenuation of the conjugated fullerene π-chromophore, the optical (HOMO-LUMO) gap in the UV/VIS spectrum is shifted to higher energy, the number of reversible one-electron reductions decreases, and the first reduction potential becomes increasingly negative, the computed LUMO energy increases and the electron affinity decreases, and the reactivity of the fullerene towards nucleophiles and carbenes and as dienophile in cycloadditions decreases.     

Methanofullerene Molecular Scaffolding: Towards C60-substituted poly(triacetylenes) and expanded radialenes,preparation of a C60–C70 hybrid derivative,and a novel macrocyclization reaction

The synthesis of (E)-hex-3-ene-l, 5-diynes and 3-methylidenepenta-1, 4-diynes with pendant methano[60]-fullerene moieties as precursors to C₆₀-substituted poly(triacetylenes) (PTAs, Fig. 1) and expanded radialenes (Fig. 2) is described. The Bingel reaction of diethyl (E)-2, 3-dialkynylbut-2-ene-1, 4-diyl bis(2-bromopropane-dioates) 5 and 6 with two C₆₀ molecules (Scheme 2) afforded the monomeric, silyl-protected PTA precursors 9 and 10 which, however, could not be effectively desilylated (Scheme 4). Also formed during the synthesis of 9 and 10 , as well as during the reaction of C₆₀ with thedesilylated analogue 16 (Scheme 5 ), were the macrocyclic products 11, 12 , and 17 , respectively, resulting from double Bingel addition to one C-sphere. Rigorous analysis revealed that this novel macrocyclization reaction proceeds with complete regio- and diastereoselectivity. The second approach to a suitable PTA monomer attempted N, N′-dicyclohexylcarbodiimide(DCC)-mediated esterification of (E)-2, 3-diethynylbut-2-ene-l, 4-diol ( 18 , Scheme 6) with mono-esterified methanofullerene-dicarboxylic acid 23 ; however, this synthesis yielded only the corresponding decarboxylated methanofullerene-carboxylic ester 27 (Scheme 7). To prevent decarboxylation, a spacer was inserted between the reacting carboxylic-acid moiety and the methane C-atom in carboxymethyl ethyl 1, 2-methano[60]fullerene-61, 61-dicarboxylate ( 28 , Scheme 8), and DCC-mediated esterification with diol 18 afforded PTA monomer 32 in good yield. The formation of a suitable monomeric precursor 38 to C₆₀-substituted expanded radialenes was achieved in 5 steps starting from dihydroxyacetone (Schemes 9 and 10), with the final step consisting of the DCC-mediated esterification of 28 with 2-[1-ethynyl(prop-2-ynylidene)]propane-1, 3-diol ( 33 ). The first mixed C₆₀-C₇₀ fullerene derivative 49 , consisting of two methano[60]fullerenes attached to a methano[70]fullerene, was also prepared and fully characterized (Scheme 13). The C_s-symmetrical hybrid compound was obtained by DCC-mediated esterification of bis[2-(2-hydroxy-ethoxy)ethyl] 1, 2-methano[70]fullerene-71, 71-dicarboxylate ( 46 ) with an excess of the C₆₀-carboxylic acid 28 . The presence of two different fullerenes in the same molecule was reflected by its UV/VIS spectrum, which displayed the characteristic absorption bands of both the C₇₀ and C₆₀ mono-adducts, but at the same time indicated no electronic interaction between the different fullerene moieties. Cyclic voltammetry showed two reversible reduction steps for 49 , and comparison with the corresponding C₇₀ and C₆₀ mono-adducts 46 and 30 indicated that the three fullerenes in the composite fullerene compound behave as independent redox centers.     

Supramolecular Fullerene Chemistry: A Comprehensive Study of Cyclophane‐Type Mono‐ and Bis‐Crown Ether Conjugates of C70

The covalently templated bis‐functionalization of C₇₀, employing bis‐malonate 5 tethered by an anti‐disubstituted dibenzo[18]crown‐6 (DB18C6) ether, proceeds with complete regiospecificity and provides two diastereoisomeric pairs of enantiomeric C₇₀ crown ether conjugates, (±)‐ 7a and (±)‐ 7b , featuring a five o'clock bis‐addition pattern that is disfavored in sequential transformations (Scheme 1). The identity of (±)‐ 7a was revealed by X‐ray crystal‐structure analysis (Fig. 6). With bis‐malonate 6 containing a syn‐disubstituted DB18C6 tether, the regioselectivity of the macrocylization via double Bingel cyclopropanation changed completely, affording two constitutionally isomeric C₇₀ crown ether conjugates in a ca. 1 : 1 ratio featuring the twelve ( 16 ) and two o'clock ((±)‐ 15 ) addition patterns, respectively (Scheme 3). The X‐ray crystal‐structure analysis of the twelve o'clock bis‐adduct 16 revealed that a H₂O molecule was included in the crown ether cavity (Figs. 7 and 8). Two sequential Bingel macrocyclizations, first with anti‐DB18C6‐tethered ( 5 ) and subsequently with syn‐DB18C6‐tethered ( 6 ) bis‐malonates, provided access to the first fullerene bis‐crown ether conjugates. The two diastereoisomeric pairs of enantiomers (±)‐ 28a and (±)‐ 28b were formed in high yield and with complete regioselectivity (Scheme 9). The cation‐binding properties of all C₇₀ crown‐ether conjugates were determined with the help of ion‐selective electrodes (ISEs). Mono‐crown ether conjugates form stable 1 : 1 complexes with alkali‐metal ions, whereas the tetrakis‐adducts of C₇₀, featuring two covalently attached crown ethers, form stable 1 : 1 and 1 : 2 host‐guest complexes (Table 2). Comparative studies showed that the conformation of the DB18C6 ionophore imposed by the macrocyclic bridging to the fullerene is not particularly favorable for strong association. Reference compound (±)‐ 22 (Scheme 4), in which the DB18C6 moiety is attached to the C₇₀ sphere by a single bridge only and, therefore, possesses higher conformational flexibility, binds K⁺ and Na⁺ ions better by factors of 2 and 20, respectively. Electrochemical studies demonstrate that cation complexation at the crown ether site causes significant anodic shifts of the first reduction potential of the appended fullerene (Table 3). In case of the C₇₀ mono‐crown ether conjugates featuring a five o'clock functionalization pattern, addition of 1 equiv. of KPF₆ caused an anodic shift of the first reduction wave in the cyclic voltammogram (CV) by 70 to 80 mV, which is the result of the electrostatic effect of the K⁺ ion bound closely to the fullerene core (Fig. 14). Addition of 2 equiv. of K⁺ ions to C₇₀ bis‐crown ether conjugates resulted in the observation of only one redox couple, whose potential is anodically shifted by 170 mV with respect to the corresponding wave in the absence of the salt (Fig. 16). The synthesis and characterization of novel tris‐ and tetrakis‐adducts of C₇₀ are reported (Schemes 5 and 6). Attempts to prepare even more highly functionalized derivatives resulted in the formation of novel pentakis‐ and hexakis‐adducts and a single heptakis‐adduct (Scheme 7), which were characterized by ¹H‐ and ¹³C‐NMR spectroscopy (Fig. 10), as well as matrix‐assisted laser‐desorption‐ionization mass spectrometry (MALDI‐TOF‐MS). Based on predictions from density‐functional‐theory (DFT) calculations (Figs. 12 and 13), structures are proposed for the tris‐, tetrakis‐, and pentakis‐adducts.     

Stereoanalysis of fullerenes with a chiral molecular framework

Stereoanalysis of three fullerene molecules with a chiral molecular framework C₃₂, C₇₆, and C₇₈ and achiral fullerene C₆₀ molecule was carried out. Comparative quantitative analysis of the degree of chirality showed topology to be the major factor governing the chirality of fullerenes. A procedure for determining the relative contribution of topological chirality to the total chirality of the molecule is proposed. Structural fragments responsible for chirality are found. The title fullerenes are assigned to the corresponding subclasses of homochirality. A classification system of isomeric fullerenes is proposed.     

Synthesis, curing kinetics and thermal properties of novel difunctional chiral and achiral benzoxazines with double chiral centers

Novel difunctional chiral and achiral benzoxazine monomers were synthesized from the reaction of bisphenol A with paraformaldehyde and primary amines, including S-(+)-3-methyl-2-butylamine and rac-(±)-3-methyl-2-butylamine, by solventless method. The chemical structures of chiral and achiral benzoxazines were identified by fourier transform infrared, nuclear magnetic resonance (¹H NMR and ¹³C NMR). The curing behavior and non-isothermal curing kinetics of chiral and achiral benzoxazine monomers were investigated by differential scanning calorimeter (DSC). Isoconversional methods based on Friedman and Kissinger–Akahira–Sunose were applied to analyze the curing process of chiral and achiral benzoxazines. The thermal properties of cured polymers were characterized by DSC and thermogravimetry. The results suggested that the optical purity and stereo-configuration for chiral and achiral benzoxazines have definite influence on curing behavior and thermal properties despite the same chemical structure. Chiral benzoxazine displayed typical characteristics of difunctional benzoxazines. Achiral benzoxazine showed distinctly double peaks in DSC exotherms due to the presence of racemic and mesomeric isomers. The thermal properties of achiral polybenzoxazine were slightly higher than those of chiral polybenzoxazine, and were much higher than those of other bisphenol A-C₃–C₈ linear aliphatic amine-based polybenzoxazines because of tight packing, low free volume, and abundant intramolecular and intermolecular hydrogen bonds in network structure of polymers.     

Optically Active Macrocyclic cis‐3 Bis‐Adducts of C60: Regio‐ and Stereoselective Synthesis,Exciton Chirality Coupling,and Determination of the Absolute Configuration,and First Observation of Exciton Coupling between Fullerene Chromophores in a Chiral Environment

A series of optically active cis‐3 bis‐adducts, such as (R,R,^fC)‐ 16 (Scheme 6), was obtained regio‐ and diastereoselectively by Bingel macrocyclization of C₆₀ with bis‐malonates, which contain optically active tethers derived from 1,2‐diols. The absolute configuration of the inherently chiral addition pattern in cis‐3 bis‐adducts had previously been determined by comparison of calculated and experimental circular dichroism (CD) spectra. Full confirmation of these earlier assignments was now obtained by an independent method based on semiempirical AM1 (`Austin Model 1') and OM2 (`Orthogonalization Method 2') calculations combined with ¹H‐NMR spectroscopy. It was found computationally that bis‐malonates [CHR(OCOCH₂COOEt)]₂, which contain (R,R)‐ or (S,S)‐butane‐2,3‐diol derivatives as optically active tethers, preferentially form out‐out cis‐3 bis‐adducts of C₆₀ as a single diastereoisomer in which the alkyl groups R adopt a gauche conformation, while the two glycolic H‐atoms are in an antiperiplanar (ap) and the ester linkages to the fullerene in a gauche relationship (Figs. 2 and 5). In contrast, in the less favorable diastereoisomer, which should not form, the alkyl groups R adopt an ap and the H‐atoms a gauche conformation, while the ester bridges to the fullerene remain, for geometric reasons, locked in a gauche conformation. According to the OM2 calculations, the geometry of the fully staggered tether in the free bis‐malonates closely resembles the conformation of the tether fragment in the bis‐adducts formed. These computational predictions were confirmed experimentally by the measurement of the coupling constant between the vicinal glycolic H‐atoms in the ¹H‐NMR spectrum. For (R,R,^fC)‐ 16 , ³J(H,H) was determined as 7.9 Hz, in agreement with the ap conformation, and, in combination with the calculations, this allowed assignment of the ^fC‐configuration to the inherently chiral addition pattern. This conformational analysis was further supported by the regio‐ and diastereoselective synthesis of cis‐3 bis‐adducts from bis‐malonates, including tethers derived from cyclic glycol units with a fixed gauche conformation of the alkyl residues R at the glycolic C‐atoms. Thus, a bis‐malonate of (R,R)‐cyclohexane‐1,2‐diol provided exclusively cis‐3 bis‐adduct (R,R,^fC)‐ 20 in 32% yield (Scheme 7). Incorporation of a tether derived from methyl 4,6‐O,O‐benzylidene‐α‐D ‐glucopyranoside into the bis‐malonate and Bingel macrocyclization diastereoselectively produced the cis‐3 stereoisomer (α,D ,^fA)‐ 22 (Scheme 8) as the only macrocyclic bis‐adduct. If the geometry of the alkyl groups R at the glycolic C‐atoms of the tether component deviates from a gauche relationship, as in the case of tethers derived from exo cis‐ and trans‐norbornane‐2,3‐diol or from trans‐cyclopentane‐1,2‐diol, hardly any macrocyclic product is formed (Schemes 5 and 9). The absolute configurations of the various optically active cis‐3 bis‐adducts were also assigned by comparison of their CD spectra, which are dominated by the chiroptical contributions of the inherently chiral fullerene chromophore (Figs. 1, 3, and 4). A strong chiral exciton coupling was observed for optically active macrocyclic cis‐3 bis‐adducts of C₆₀ with two appended 4‐(dimethylamino)benzoate ((S,S,^fC)‐ 26 ; Fig. 6) or meso‐tetraphenylporphyrin ((R,R,^fC)‐ 28 ; Fig. 7) chromophores. Chiral exciton coupling between two fullerene chromophores was observed for the first time in the CD spectrum of the threitol‐bridged bis‐fullerene (R,R)‐ 35 (Fig. 9).     

On the Mechanisms of Enantioselective Reactions Using α,α,α′,α′ -Tetraaryl-1,3-dioxolane-4,5-dimethanol(TADDOL)-Derived Titanates: Differences between C2- and C1-symmetrical TADDOLs – facts,implications and generalizations

The titanates derived from α,α,α′,α′-tetraaryl-1,3-dioxolane-4,5-dimethanols (TADDOLs, prepared from tartrate) act as catalysts for enantioselective additions of dialkylzinc compounds to aldehydes. For the standard reaction chosen for this investigation of the mechanism, the addition of diethylzinc to benzaldehyde, there is very little change of selectivity with different aryl substituents on the TADDOLate ligands (Tables 2–4, examples). With 0.02 to 0.2 equiv. of the chiral titanates, selectivities above 90% are observed only in the presence of excess tetraisopropyl titanate! According to NMR measurements (Fig. 2), the chiral bicyclic titanate and the achiral titanate do not react to give new species under these conditions. From experiments with different stoichiometries of the components, and with different achiral or chiral OR groups on the Ti-atom of the seven-membered ring titanate, it is concluded (i) that a single chiral titanate is involved in the product-forming step, (ii) that the bulky TADDOLate ligand renders the Ti-center catalytically more active than that of (i-PrO)₄Ti, due to fast dynamics of ligand exchange on the sterically hindered Ti-center (Table 5, Fig. 3), and (iii) that the role of excess (i-PrO)₄Ti is to remove – by ligand exchange – the product alkoxides (R*O) from the catalytically active Ti-center (Scheme 4, Table 6). Three new crystal structures of TADDOL derivatives (two clathrates with secondary amines, and a dimethyl ether) have been determined by X-ray diffraction (Figs. 5–7), and are compared with those previously reported. The distances between the C(aryl)₂O oxygen atoms in the C₂- and C₁-symmetrical structures vary from 2.58 to 2.94 Å, depending upon the conformation of their dioxolane rings and the presence or absence of an intramolecular H-bond (Fig. 8). A single-crystal X-ray structure of a spiro-titanate, with two TADDOLate ligands on the Ti-atom, is described (Fig. 9); it contains six different seven-membered titanate-ring conformations in the asymmetric unit (Fig. 10), which suggests a highly flexible solution structure. The structures of Ti TADDOLate complexes are compared with those of C₂-symmetrical Ru, Rh, and Pd disphosphine chelates (Table 7). A common topological model is presented for all nucleophilic additions to aldehydes involving Ti TADDOLates (Si attack with (R,R)-derivatives, relative topicity unlike; Fig. 11). Possible structures of complexes containing bidentate substrates for Ti TADDOLate-mediated ene reactions and cycloadditions are proposed (Fig. 12). A simple six-membered ring chair-type arrangement of the atoms involved can be used to describe the result of TADDOLate-mediated nucleophilic additions to aldehydes and ketones, with Ti, Zr, Mg, or Al bearing the chiral ligand (Scheme 6). A proposal is also made for the geometry of the intermediate responsible for enantioselective hydrogenation of N-(acetylamino)cinnamate catalyzed by Rh complexes containing C₂-symmetrical diphosphines (Fig. 13).     

C2-Symmetrical Pyrrolidine Derivatives Chiral Auxiliaries in Radical Chemistry

Fumaramides 3b and 3c bearing the C₂-symmetrical pyrrolidine moieties (2R,5R)-2,5-bis(methoxymethyl)pyrrolidine ( 2b ) or 1,3:4,6-di-O-benzylidene-2,5-dideoxy-2,5-imino-L -idit ( 2c ), respectively, as a chiral auxiliary lead to high diastereoselectivities in radical reactions (‘tin method’;Scheme 1). Removal of the chiral auxiliaries affords the corresponding alkylated fumaric acids Scheme 2. Single-crystal X-ray structures of 3b and 3c support arguments that lead to the model of 1,4-stereoinduction.     

The Chirality of Icosahedral Fullerenes: a Comparison of the Tripling (leapfrog), Quadrupling (chamfering), and Septupling (capra) Transformations

Fullerene polyhedra of icosahedral symmetry have the midpoints of their 12 pentagonal faces at the vertices of a macroicosahedron and can be characterized by the patterns of their hexagonal faces on the (triangular) macrofaces of this macroicosahedron. The numbers of the vertices in fullerene polyhedra of icosahedral symmetry satisfy the Goldberg equation v=20(h ²+hk+k ²), where h and k are two integers and 0 <h≥ k≥ 0 and define a two-dimensional Goldberg vector G = (h, k). The known tripling (leapfrog), quadrupling (chamfering), and septupling (capra) transformations correspond to the Goldberg vectors (1, 1), (2, 0), and (2, 1), respectively. The tripling and quadrupling transformations applied to the regular dodecahedron generate achiral fullerene polyhedra with the full I _h point group. However, the septupling transformation destroys the reflection operations of the underlying icosahedron to generate chiral fullerene polyhedra having only the I icosahedral rotational point group. Generalization of the quadrupling transformation leads to the fundamental homologous series of achiral fullerene polyhedra having 20 n ² vertices and Goldberg vectors (n, 0). A related homologous series of likewise achiral fullerene polyhedra having 60 n ² vertices and Goldberg vectors (n, n) is obtained by applying the tripling transformation to regular dodecahedral C₂₀ to give truncated icosahedral C₆₀ followed by the generalized operations (as in the case of quadrupling) for obtaining homologous series of fullerenes. Generalization of the septupling (capra) transformation leads to a homologous series of chiral C_20m fullerenes with the I point group and Goldberg vectors G=(h, 1) where m=h ²+h+1.     

Fullerene-Acetylene Molecular Scaffolding: Chemistry of 2-functionalized 1-ethynylated C60, oxidative homocoupling,hexakis-adduct formation,and attempted synthesis of C

On the way to the fullerene-acetylene hybrid carbon allotropes 2 and 6 , the oxidative homocoupling of the 2-functionalized 1-ethynylated C₆₀ derivatives 11, 12, 14 , and 15 was investigated. Under Glaser-Hay conditions, the two soluble dumbbell-shaped bisfullerenes 17 and 18 , with two C₆₀ moieties linked by a buta-1,3-diynediyl bridge, were formed in 52 and 82% yield, respectively (Scheme 2). Cyclic-voltammetric measurements revealed that there is no significant electronic communication between the two fullerene spheres via the buta-1,3-diynediyl linker. Removal of the 3,4,5,6-tetrahydro-2H-pyran-2-yl (Thp) protecting groups in 18 gave in 80% yield the highly insoluble dumbbell 19 with methanol groups in the 2,2′-positions of the buta-1,3-diynediyl-bridged carbon spheres. Attempted conversion of 19 to the all-carbon dianion 6 (C) via base-induced elimination of formaldehyde was not successful presumably due to exo-dig cyclization of the formed alkoxides. The occurrence of this cyclization under furan formation was proven for 2-[4-(trimethylsilyl)buta-1,3-diyn-1-yl][60]fullerene-1-methanol ( 21 ), a soluble model compound for 19 (Scheme 3). To compare the properties of ethynylated fullerene mono-adducts to those of corresponding higher adducts, hexakis-adducts 26 and 28 with an octahedral functionalization pattern resulting from all-e (equatorial) additions were prepared by the reversible-template method of Hirsch (Scheme 4). Reaction of the ethynylated mono-adducts 25 or 13 with diethyl 2-bromomalonate/1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) in the presence of 1,9-dimethylanthracene (DMA) as reversible template led to 26 and 28 in 28 and 22% yield, respectively. Preliminary experiments indicated a significant change in reactivity and NMR spectral properties of the fullerene addends with increasing degree of functionalization.     

手性有机酸薄层色谱保留指数的拓扑模型

基于Kier的分子连接性指数及邻接矩阵提出新型分子连接性指数（^mG_t^v）;引入手性指数（w_j）并建立了手性连接性指数（^mG_t^v）：^mG_t^v=^mG_t^v×w_j。^mG_t^v适用于手性分子、非手性分子及内消旋异构体的结构差异表征。用多元统计回归研究18种手性羟酸和氨基酸的薄层色谱保留指数（R_M）与^mG_t^v的定量构效关系,经最佳变量子集回归建立其四元数学模型,传统的判定系数（R²）为0.973,逐一剔除法（leave-one-out,LOO）的交互验证系数（Q²）为0.950,结果证明具有良好的稳健性及预测能力。根据进入该模型的4个手性连接性指数（⁰C_p^v、²C_p^v、C_ch^v、⁵C_p^v）可知,影响手性有机酸保留指数的主要因素是分子的二维结构特征和分子的手性特征以及柔韧性、折叠程度等三维结构因素。从上可见,新建手性连接性指数对手性有机酸的保留指数表征具有合理性与有效性,为预测手性有机酸的保留指数提供了一种有效方法。     

Near-Infrared-Absorbing Chiral Open [60]Fullerenes

Though [60]fullerene is an achiral molecular nanocarbon with I_h symmetry, it could attain an inherent chirality depending upon a functionalization pattern. The conventional chiral induction of C₆₀ relies mainly upon a multiple addition affording a mixture of achiral and chiral isomers while their chiral function would be largely offset by the existence of pseudo-mirror plane(s). These are major obstacles to proceed further study on fullerene chirality and yet leave its understanding elusive. Herein, we showcase a carbene-mediated synthesis of C₁-symmetric chiral open [60]fullerenes showing an intense far-red to near-infrared absorption. The large dissymmetry factor of |g_abs|=0.12 was achieved at λ=820 nm for circular dichroism in benzonitrile. This is, in general, unachievable by other small chiral organic molecules, demonstrating the potential usage of open [60]fullerenes as novel types of chiral chromophores.     

Macrotricyclic Steroid Receptors by Pd°-Catalyzed Cross-Coupling Reactions: Dissolution of cholesterol in aqueous solution and investigations of the principles governing selective molecular recognition of steroidal substrates

Three double-decker cyclophane receptors, (±)- 2 , (±)- 3 , and (±)- 4 with 11–13-Å deep hydrophobic cavities were prepared and their steroid-binding properties investigated in aqueous and methanolic solutions. Pd°-Catalyzed cross-coupling reactions were key steps in the construction of these novel macrotricyclic structures. In the synthesis of D₂-symmetrical (±)- 2 , the double-decker precursor (±)- 7 was obtained in 14% yield by fourfold Stille coupling of equimolar amounts of bis(tributylstannyl)acetylene with dibromocyclophane 5 (Scheme 1). For the preparation of the macrotricyclic precursor (±)- 15 of D₂-symmetrical (±)- 3 , diiodocylophane 12 was dialkynylated with Me₃SiC?CH to give 13 using the Sonogashira cross-coupling reaction; subsequent alkyne deprotection yielded the diethynylated cyclophane 14 , which was transformed in 42% yield into (±)- 15 by Glaser-Hay macrocyclization (Scheme 2). The synthesis of the C₂-symmetrical conical receptor (±)- 4 was achieved via the macrotricyclic precursor (±)- 25 , which was prepared in 20% yield by the Hiyama cross-coupling reaction between the diiodo[6.1.6.1]paracyclophane 19 and the larger, dialkynylated cyclophane 17 (Scheme 4). Solid cholesterol was efficiently dissolved in water through complexation by (±)- 2 and (±)- 3 , and the association constants of the formed 1:1 inclusion complexes were determined by solid-liquid extraction as K_a = 1.1 × 10⁶ and 1.5 × 10⁵ l mol^?1, respectively (295 K) (Table 1). The steroid-binding properties of the three receptors were analyzed in detail by ¹H-NMR binding titrations in CD₃OD. Observed steroid-binding selectivities between the two structurally closely related cylindrical receptors (±)- 2 and (±)- 3 (Table 2) were explained by differences in cavity width and depth, which were revealed by computer modeling (Fig. 4). Receptor (±)- 2 , with two ethynediyl tethers linking the two cyclophanes, possesses a shallower cavity and, therefore, is specific for flatter steroids with a C(5)?C(6) bond, such as cholesterol. In contrast, receptor (±)- 3 , constructed with longer buta-1,3-diynediyl linkers, has a deeper and wider hydrophobic cavity and prefers fully saturated steroids with an aliphatic side chain, such as 5α-cholestane (Fig. 7). In the 1:1 inclusion complexes formed by the conical receptor (±)- 4 (Table 3), testosterone or progesterone penetrate the binding site from the wider cavity side, and their flat A ring becomes incorporated into the narrower [6.1.6.1]paracyclophane moiety. In contrast, cholesterol penetrates (±)- 4 with its hydrophobic side chain from the wider rim of the binding side. This way, the side chain is included into the narrower cavity section shaped by the smaller [6.1.6.1]paracyclophane, While the A ring protrudes with the OH group at C(3) into the solvent on the wider cavity side (Fig. 8). The molecular-recognition studies with the synthetic receptors (±)- 2 , (±)- 3 , and (±)- 4 complement the X-ray investigations on biological steroid complexes in enhancing the understanding of the principles governing selective molecular recognition of steroids.     

Photophysical properties of novel water soluble fullerene derivatives

The spectroscopic and photophysical properties for a series of bis-adduct derivatives of C₆₀ have been studied using a combination of time-resolved and steady state techniques, including picosecond single photon counting and laser flash photolysis. The electronic absorption and fluorescence spectra are red shifted with respect to those of C₆₀. As with the parent fullerene, the main deactivation channel of the excited singlet state is intersystem crossing with the yields of singlet oxygen ranging from 0.63 to 0.97. Our results demonstrate that the photophysical properties depend on the addition pattern of the addends.     

Asymmetric synthesis of α-substituted alkylphosphonates based on symmetrical dialkyl phosphites

Chiral C₂-symmetrical dialkyl phosphites and C₃-symmetrical trialkyl phosphites, derived from (−)-borneol, (−)-menthol, and 1,2∶5,6-di-O-isopropylidene-α-d-glucofuranose, were studied as the starting reagents for the preparation of chiral organophosphorus compounds. The reactions of C₂-symmetrical dialkyl phosphites and C₃-symmetrical trialkyl phosphites with aldehydes and amines or aldehydes are accompanied by asymmetrical induction at the α-carbon atom to yield optically active α-aminoalkylphosphanates or α-hydroxyalkylphosphonates, respectively. The stereoselectivity of the reaction depends on the structure of the starting compounds and the reaction conditions. Translated fromIzvestiya Akademii, Nauk, Seriya Khimicheskaya, No. 8, pp. 1588–1593, August, 1999.