Formation of 6,10‐Diphenyl‐Substituted Heptalene‐4,5‐dicarboxylates

It is shown that 4,8‐diphenylazulene ( 1 ) can be easily prepared from azulene by two consecutive phenylation reactions with PhLi, followed by dehydrogenation with chloranil. Similarly, a Me group can subsequently be introduced with MeLi at C(6) of 1 (Scheme 2). This methylation led not only to the expected main product, azulene 2 , but also to small amounts of product 3 , the structure of which has been determined by X‐ray crystal‐structure analysis (cf. Fig. 1). As expected, the latter product reacts with chloranil at 40° in Et₂O to give 2 in quantitative yields. Vilsmeier formylation of 1 and 2 led to the formation of the corresponding azulene‐1‐carbaldehydes 4 and 5 . Reduction of 4 and 5 with NaBH₄/BF₃ ? OEt₂ in diglyme/Et₂O 1 : 1 and BF₃ ? OEt₂, gave the 1‐methylazulenes 6 and 7 , respectively. In the same way was azulene 9 available from 6 via Vilsmeier formylation, followed by reduction of azulene‐1‐carbaldehyde 8 (Scheme 3). The thermal reactions of azulenes 1, 6 , and 7 with excess dimethyl acetylenedicarboxylate (ADM) in MeCN at 100° during 72 h afforded the corresponding heptalene‐4,5‐dicarboxylates 11, 12 , and 13 , respectively (Scheme 4). On the other hand, the highly substituted azulene 9 gave hardly any heptalene‐4,5‐dicarboxylate.     

Formation of 3-Sulfonyl-Substituted Benzo[a]heptalene-2,4-diols from Heptalene-1,2-dicarboxylates and Lithiomethyl Phenyl Sulfones

On treatment with 6 mol-equiv. of lithiomethyl phenyl sulfone at −78° in THF, dimethyl 5,6,8,10-tetramethylheptalene-1,2-dicarboxylate ( 1′b ) gives, after raising the temperature to −10° and addition of 6 mol-equiv. of BuLi, followed by further warming to ambient temperature, the corresponding 3-(phenylsulfonyl)benzo[a]heptalene-2,4-diol 2b in yields up to 65% (cf. Scheme 6 and Table 2), in contrast to its double-bond-shifted (DBS) isomer 1b which gave 2b in a yield of only 6% [1]. The bisanion [ 9 ]²⁻ of the cyclopenta[a]heptalen-1(1H)-one 9 (cf. Fig. 1), carrying a (phenylsulfonyl)methyl substituent at C(11b), seems to be a key intermediate on the reaction path to 2b , because 9 is transformed in high yield into 2b in the presence of 6 mol-equiv. of BuLi in the temperature range of −10° to room temperature (cf. Scheme 7). Heptalene-dicarboxylate 1′b was also transformed into benzo[a]heptalene-2,4-diols 2c – g by a number of lithiated methyl X-phenyl sulfones and BuLi (cf. Scheme 9 and Table 3).     

New Results in the Synthesis of Styrylazulene Derivatives: Application of the ‘Anil synthesis’ to the preparation of azulenes substituted with styryl groups at the seven-membered ring

The synthesis of 4,6,8-trimethyl-1-[(E)-4-R-styryl]azulenes 5 (R=H, MeO, Cl) has been performed by Wittig reaction of 4,6,8-trimethylazulene-1-carbaldehyde ( 1 ) and the corresponding 4-(R-benzyl)(triphenyl)phosphonium chlorides 4 in the presence of EtONa/EtOH in boiling toluene (see Table 1). In the same way, guaiazulene-3-carbaldehyde ( 2 ) as well as dihydrolactaroviolin ( 3 ) yielded with 4a the corresponding styrylazulenes 6 and 7 , respectively (see Table 1). It has been found that 1 and 4b yield, in competition to the Wittig reaction, alkylation products, namely 8 and 9 , respectively (cf. Scheme 1). The reaction of 4,6,8-trimethylazulene ( 10 ) with 4b in toluene showed that azulenes can, indeed, be easily alkylated with the phosphonium salt 4b . 4,6,8-Trimethylazulene-2-carbaldehyde ( 12 ) has been synthesized from the corresponding carboxylate 15 by a reduction (LiAlH₄) and dehydrogenation (MnO₂) sequence (see Scheme 2). The Swern oxidation of the intermediate 2-(hydroxymethyl)azulene 16 yielded only 1,3-dichloroazulene derivatives (cf. Scheme 2). The Wittig reaction of 12 with 4a and 4b in the presence of EtONa/EtOH in toluene yielded the expected 2-styryl derivatives 19a and 19b , respectively (see Scheme 3). Again, the yield of 19b was reduced by a competing alkylation reaction of 19b with 4b which led to the formation of the 1-benzylated product 20 (see Scheme 3). The ‘anil synthesis’ of guaiazulene ( 21 ) and the 4-R-benzanils 22 (R=H, MeO, Cl, Me₂N) proceeded smoothyl under standard conditions (powered KOH in DMF) to yield the corresponding 4-[(E)-styryl]azulene derivatives 23 (see Table 4). In minor amounts, bis(azulen-4-yl) compounds of type 24 and 25 were also formed (see Table 4). The ‘anil reaction’ of 21 and 4-NO₂C₆H₄CH=NC₆H₅ ( 22e ) in DMF yielded no corresponding styrylazulene derivative 23e . Instead, (E)-1,2-bis(7-isopropyl-1-methylazulen-4-yl)ethene ( 27 ) was formed (see Scheme 4). The reaction of 4,6,8-trimethylazulene ( 10 ) and benzanil ( 22a ) in the presence of KOH in DMF yielded the benzanil adducts 28 to 31 (cf. Scheme 5). Their direct base-catalyzed transformation into the corresponding styryl-substituted azulenes could not be realized (cf. Scheme 6). However, the transformation succeeded smoothly with KOH in boiling EtOH after N-methylation (cf. Scheme 6).     

Formation of 2‐(Phenylsulfonyl)resorcinols (=2‐(Phenylsulfonyl)benzene‐1,3‐diols) from Symmetrically Substituted Maleic Anhydrides (=Furan‐2,5‐diones)

Treatment of symmetrically substituted maleic anhydrides (=furan‐2,5‐diones) 6 with lithium (phenylsulfonyl)methanide, followed by methylation of the adduct with MeI/K₂CO₃ in acetone, give the corresponding 4,5‐disubstituted 2‐methyl‐2‐(phenylsulfonyl)cyclopent‐4‐ene‐1,3‐diones 8 (Scheme 3). Reaction of the latter with lithium (phenylsulfonyl)methanide in THF (?78°) and then with 4 mol‐equiv. BuLi (?5° to r.t.) leads to 5,6‐disubstituted 4‐methyl‐2‐(phenylsulfonyl)benzene‐1,3‐diols 9 (Scheme 4).     

Crystallization studies of poly(trimethylene terephthalate) using thermal analysis and far‐infrared spectroscopy

Crystallization of poly(trimethylene terephthalate) (PTT) by annealing was examined using density measurement, differential scanning calorimetry, and far‐infrared spectroscopy (FIR). Crystallinity, measured by density, increased slowly up to the T_a of 185 °C and increases rapidly once T_a exceeds 185 °C. It was found that thermally induced crystallization is mainly temperature‐dependent above T_a = 185 °C and temperature‐ and time‐dependent below T_a = 60 °C. Two melting transitions, T and T, were observed for those samples annealed above 120 °C. No significant change in T was observed as a function of T_a while T showed strong dependency on T_a. Digital subtraction of the amorphous contribution from the semicrystalline FIR spectra provided characteristic spectra of amorphous and crystalline PTT. The bands at 373, 282, and 92 cm^?1 were assigned to the crystalline phase, while the bands at 525, 406, and 351 cm^?1 were attributed to the amorphous phase. It was shown that FIR spectroscopy can be used as a means to estimate the degree of crystallinity of PTT. The band ratio of 373 and 501 cm^?1 was plotted against crystallinity measured by density and reasonably good correlation was obtained. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1675–1682, 2007     

A Detailed Investigation of the Reaction of 5,9-Diphenylbenz[a]azulene with Dialkyl Acetylenedicarboxylates Leading to Dialkyl 8,12-Diphenylbenzo[a]heptalene-6,7-dicarboxylates

The synthesis of 5,9-diphenylbenz[a]azulene ( 1 ) from 1,3-diphenylcyclopent[a]indene-2,8-dione ( 4 ) and cyclopropene has been re-investigated. The reduction of the decarbonylated cycloadduct 5 with LiAlH₄/AlCl₃ in Et₂O leads not only to the expected 7,10-dihydrobenz[a]azulene 6 , but also to small amounts of the cyclopropa[b]fluorenes exo- 7 and endo- 7 (cf. Scheme 2), the structures of which have been determined by X-ray crystal-structure analysis (cf. Fig. 1). The reaction of 1 with dialkyl acetylenedicarboxylates (ADR) in MeCN at 100° in the presence of 2 mol-% of catalysts such as [RuH₂(PPh₃)₄] results mainly in the formation of the expected 8,12-diphenylbenzo[a]heptalene-6,7-dicarboxylates 3 . A thorough investigation of the reaction mixture of 1 and dimethyl acetylenedicarboxylate (ADM) revealed the presence of a number of intermediates and side products (Scheme 5). Most important was the isolation and identification of the cyclobutene intermediate 9a (cf. Fig. 4), which is formed by a zwitterionic rearrangement of the primary adduct 2a of 1 and ADM and represents the direct precursor of the heptalene-diester 3a . Compounds of type 9a have so far only been postulated as necessary intermediates in the thermal reaction of azulenes and ADR to give corresponding heptalenedicarboxylates. Compound 9a is photochemically unstable and undergoes rearrangement even under the influence of normal laboratory light into a mixture of trans- 10a and cis- 10a (Scheme 8). Both diastereoisomers are also found in the original reaction mixture of 1 and ADM, but not when the reaction is performed under exclusion of light. On heating in MeCN at 100°, or better in DMF at 150°, trans- 10a and cis- 10a undergo rearrangement to the fluoranthene-1,2-dicarboxylate 11a (Scheme 9), which is also present in the original reaction mixture of 1 and ADM. The catalysts do not accelerate the reaction of 1 and ADR, but they lead to better yields of the benzo[a]heptalene-6,7-dicarboxylates 3 , especially in the reaction of 1 with diisopropyl acetylenedicarboxylate (ADiP) (cf. Tables 1 and 2).     

Remarkable Enhancement of the Rate of Cathodic Reduction of Hydrocarbonate Anions at Palladium in the Presence of Caesium Cations

Steady-state polarization curves, representative of the electrochemical reduction of HCO ions at a smooth palladium cathode, obtained in CsHCO₃ and NaHCO₃ solutions, are compared. The net current densities, associated with the electroreduction of HCO anions, measured in 1M CsHCO₃ solution are shown to be up to 9 times larger than those observed in 1M NaHCO₃ solution. This result is interpreted in terms of a direct involvement of the Cs⁺ cations in the reaction at the cathode through the formation of ion pairs with the HCO anions.     

Formation of· CH2CH2CO + and C2H6+· in the metastable decompositions of ionized ethyl formate

The products of the metastable decompositions of ionized ethyl formate (a) are characterized. The loss of water from a produces ^·CH₂CH₂CO⁺, a rarely reported product. Loss of H appears to produce CH₂=CHC(OH). The third decomposition is an unusual formation of C₂H. This work demonstrates that a previous supposition that isomerization to different intermediates is involved in the losses of ethene and of water from a is correct.     

Thermal Reaction of Azulenes with Dimethyl Acetylenedicarboxylate in Supercritical Carbon Dioxide

1,3,4,6,8-Pentamethylazulene ( 9 ), when heated at 100° in supercritical CO₂ at 150 bar in the presence of 4 equiv. of dimethyl acetylenedicarboxylate (ADM), led to the formation of 16% of a 1:1 mixture of dimethyl 3,5,6,8,10-pentamethylheptalene-1,2-dicarboxylate 12a ) and its double-bond-shifted isomer 12b as well as 4% of the corresponding azulene-1,2-dicarboxylate 13 (Scheme 4). The formation of the [1 + 2] adduct 11 (cf. Scheme 2) was not observed. Similarly, benz[a]azulene ( 25 ) yielded in supercritical CO₂ (150°/170 bar) in the presence of 4 equiv. of ADM dimethyl benzo[d]heptalene-6,7-dicarboxylate ( 29 ; 30%) and dimethyl benzo[a]cyclopent[cd]azulene-1,2-dicarboxylate ( 28 ; 22%; Scheme 5). The reaction of 5,9-diphenylbenz[a]azulene ( 26 ) and ADM in supercritical CO₂ (100°/150 bar) gave the corresponding benzo[d]heptalene-6,7-dicarboxylate 31 (22%) and dimethyl 5,9-diphenyl-4b,10-etheno-10H-benz[a]azulene-11,12-dicarboxylate( 30 ; 25%; Scheme 5).     

Kinetics and mechanism of the cationic polymerization of tetrahydrofuran in solution: THF-CH3NO2 system

Polymerization of tetrahydrofuran (THF) in CH₃NO₂ solvent was initiated with 1,3-dioxolan-2-ylium cations with AsF and SbF anions, as well as with esters of FSO₃H and CF₃SO₃H acids. Polymerization shows in this solvent a living feature: values of k_p (determined directly from the semilogarithmic kinetic plots) were the same for all of the listed above initiators; thus k_p is the same for AsF, CF₃SO, FSO, and SbF anions. The identity of the k_p values for complex and noncomplex (ester-forming) anions comes from the fact that in CH₃NO₂ solvent equilibrium between macroesters and macroion pairs is shifted almost completely (K_e = 33.0 at 25°C and |THF|₀ = 7.0M) to the macroions side. Dissociation constants of the polytetrahydrofuranium ion pairs (CF₃SO and SbF anions) were measured (e.g., K_D = 2 × 10^?3 M at 25°C and |THF|₀ = 7.0M; i.e., at D = 22.8, ΔH_D = ?3.8 ± 6 kcal mole; ΔS_D = ?25 ± 2 eu). On the basis of the known values of K_D, and therefore dissociation degrees α, rate constants of propagation on the free and paired THF cations (k and k) were determined for a large range of degrees of dissociation (α from 0.15 to 0.52). The rate constants k and k were found to be the same within an experimental error of measurements (± 15% of the value of k_p). Apparently, the polytetrahydrofuranium cations are highly solvated or even separated from their anions by molecules of THF itself. At these conditions the reactivities of the solvated “free” and solvated (or separated) paired cations became undistinguishable.     

Metallorganische Verbindungen der Lanthanoide. 111. Synthese und Charakterisierung kationischer Metallocen-Komplexe der Lanthanoide. Röntgenstrukturanalyse von [CpYb(THF)2][BPh4]

Organometallic Compounds of the Lanthanoids. 111. Synthesis and Characterization of Cationic Metallocene Complexes of the Lanthanoides. X-Ray Crystal Structure of [Cp Yb(THF)₂][BPh₄] Cationic organolanthanoide compounds [(C₅H₄R)₂Sm(THF)₂][BPh₄] (R = ^tBu ( 1 ), SiMe₃ ( 2 )), [PyrSm(THF)][BPh₄] ( 3 ) (Pyr* = NC₄H₂^tBu₂-2,5), [CpLn(THF)₂][BPh₄] (Cp* = C₅Me₅; Ln = Y ( 4 ), Yb ( 5 )), and [(C₅Me₄Et)₂ Ln(THF)₂][BPh₄] (Ln = Y ( 6 ), Sm ( 7 )) have been synthesized by oxidation of the divalent metallocenes [(C₅H₄R)₂Sm(THF)₂] (R = ^tBu, SiMe₃), [PyrSm(THF)], [CpYb(THF), and [(C₅Me₄Et)₂Sm(THF)] with Ag[BPh₄] and by protolysis of the lanthanoide alkyls [CpYMe(THF)], [CpYbCH(SiMe₃)₂], and [(C₅Me₄Et)₂LnCH(SiMe₃)₂] (Ln = Y, Sm) by [NEt₃H][BPh₄]. The ¹H- and ¹³C-NMR spectra of the new compounds are discussed. 5 crystallizes in the space group P2₁/c with a = 10.604(7), b = 21.749(3), c = 19.124(4) Å, β = 96.47(4)°, Z = 4 and V = 4383(3) ų (R = 0.0291 for 8517 observed reflections with F_o ≥ 4σ (F_o).     

Assembly of Chiral Two- and Three-dimensional Copper(I) Pseudohalide Based Coordination Polymers with Asymmetrically Substituted Pyrazine and Pyrimidine Ligands

The coordination polymers [(CuCN)₂(μ-2 Mepyz)], [CuCN(μ-2 Mepyz)] and [CuCN(μ-4 Mepym)] ( 1 – 3 ) (2 Mepyz = 2-methylpyrazine; 4 Mepym = 4-methylpyrimidine) may be prepared by self-assembly in acetonitrile solution at 100 °C ( 1 , 3 ) or without solvent at 20 °C ( 2 ). All three contain [CuCN] chains that are bridged by the bidentate aromatic ligands into sheets in 1 and 3 D frameworks in 2 and 3 . Reaction of CuSCN with these heterocyclic diazines at 100 °C leads to formation of the lamellar coordination polymers [(CuSCN)(μ-2 Mepyz)] ( 4 ) and [CuSCN · (4 Mepym-κN1)] ( 5 ), which contain respectively [CuSCN] chains and trans-trans fused [CuSCN] sheets as substructures. The presence of an asymmetric substitution pattern in 2 Mepyz and 4 Mepym induces the adoption of a chiral structure by 2 and 5 (space groups P2₁2₁2₁ and P1).     

SCF and MC–SCF Study of CO2 with bond angle variation

Multiconfiguration (MC ) SCF calculations are reported for CO₂ for bond angles between 60° and 180°. The ground state configuration is found to be …?5a4b∣b∣a for small bending angles and …?6a3b∣b∣a for large bending angles, the change in ground state character occurring at a bond angle of about 100°. The force constant for bending obtained from the MC –SCF function is about 8.0% lower than the corresponding SCF value, and in considerably better agreement with experiment.     

Cationic RhI Complexes of Azulenes and Their Catalytic Activity on the Formation of Heptalene-1,2-dicarboxylates from Dimethyl Acetylenedicarboxylate and Azulenes

[Rh¹(η⁵-azulene)(cod)]⁺BF complexes 3a–g (cod = (Z,Z)-cycloocta-1,5-diene) have been synthesized by reaction of [Rh¹(cod)]⁺BF in THF with the corresponding azulenes 1a–g (Table 1). The structure of [Rh¹(cod)(η⁵-guaiazulene)]⁺BF ( 3a ) has been determined by X-ray diffraction analysis (Fig. 1 and 2). The Rh-atom is oriented above the five-membered ring of the azulene with almost equal Rh? C distances to all five C-atoms of the ring. The (Z,Z)-cycloocta-1,5-diene ring occurs in two enantiomorphic distorted (C_2v → C₂) tub conformations in the crystals (Fig. 3). In CDCl₃ solution, the cod ligand in the complexes 3 shows a dynamic behavior on the ¹H-NMR time scale which is best explained by rotation of the cod ligand relative to the azulene ligands around an imaginary cod? Rh? azulene axis. The new complexes 3 catalyze the formation of heptalene-1,2-dicarboxylates 2 from dimethyl acetylenedicarboxylate (ADM) and the corresponding azulenes 1 just as effectively as [RuH₂(PPh₃)₄] and the analogous [RhH(PPh₃)₄] complex in MeCN solution (Table 3). On grounds of simplicity, 3 can be generated in situ, when [RhCl(cod)]₂ is applied as catalyst (Table 3).     

Synthesis and Chiroptical Properties of Dimethyl 8,12-Diphenylbenzo[d]heptalene-6,7-dicarboxylate

6,10-Diphenylbenz[a]azulene ( 3 ) was reacted with dimethyl acetylenedicarboxylate (ADM) in the presence of 2 mol-% of [RuH₂(PPh₃)₄] in MeCN at 100° to yield a 7:1 mixture of dimethyl 2,6-diphenyl-9,10-benzotricyclo[6.2.2.0^1,7]dodeca-2,4,6,9,11-pentaene-11,12-dicarboxylate ( 4 ) and dimethyl 8,12-diphenylbenzo[d]heptalene-6,7-dicarboxylate ( 5 ; Scheme 2). The tricycle 4 , when heated in DMF at 150° for 1 h led to the formation of 81.5% of the heptalene-6,7-dicarboxylate 5 and 15% of the starting azulene 3 . No rearrangement of tricycle 4 was observed, when it was heated at temperatures up to 180° in pseudocumene. The heptalene-6,7-dicarboxylate 5 was easily separated into its antipodes (PM)-and (MP)- 5 on a Chiracel column (cf. Fig. 2). On heating at 150° for 1 h, (MP)- 5 showed no racemization at all. The Ru-catalyzed reaction of benz[a]azulene ( 6 ) with ADM led to the formation of dimethyl 9,10-benzotricyclo[6.2.2.0^1,7]dodeca-2,4,6,9,11-pentaene-11,12-dicarboxylate ( 7 ; Scheme 3). However, the formation of the corresponding heptalene-6,7-dicarboxylate could not be observed.     

Kinetics and mechanism of the cationic polymerization of tetrahydrofuran in solution. THF–CH2Cl2 and THF–CH2Cl2/CH3NO2 systems

Cationic polymerization of tetrahydrofuran (THF) in CH₂Cl₂ solvent and in mixed CH₂Cl₂/CH₃NO₂ solvent was initiated with 1,3-dioxolan-2-ylium cations with AsF and SbF anions. Dissociation constants of the polytetrahydrofuranium ion pairs into ions were measured (e.g., K_D = 1.5 × 10^?5M at 25°C and [THF]₀ = 7.0M; CH₂Cl₂ solvent) and were found to be more than 100 times lower than in CH₃NO₂ solvent at the same [THF]₀ and temperature. The rate constants k and k, measured for degrees of dissociation ranging from 0.03 to 0.35 in CH₂Cl₂, were the same within an experimental error of measurements (±15% of the value of k_p). Dependence of k( = k = k) on the dielectric constant was a monotonous function in three different solvents, namely, CCl₄, CH₂Cl₂, and CH₃NO₂, which covered a large range of dielectric constants of the medium (from D = 5 to D = 22) and degrees of dissociation of the macroion pairs, α (from 0.03 to more than 0.70). Thus a decrease in the dielectric constant increases the rate constant k in the whole range of studied polarities of the medium. This result confirms an earlier conclusion that the rate constant of propagation does not depend on the state of aggregation of ions and k = k.     

Benzo[a]heptalenes from Heptaleno[1,2‐c]furans. Part 2

It is shown in this ‘Part 2’ that heptaleno[1,2‐c]furans 1 react thermally in a Diels–Alder‐type [4+2] cycloaddition at the furan ring with vinylene carbonate (VC), phenylsulfonylallene (PSA), α‐(acetyloxy)acrylonitrile (AAN), and (1Z)‐1,2‐bis(phenylsulfonyl)ethene (ZSE) to yield the corresponding 1,4‐epoxybenzo[d]heptalenes (cf. Schemes 1, 5, 6, and 8). The thermal reaction of 1a and 1b with VC at 130° and 150°, respectively, leads mainly to the 2,3‐endo‐cyclocarbonates 2,3‐endo‐ 2a and ‐ 2b and in minor amounts to the 2,3‐exo‐cyclocarbonates 2,3‐exo‐ 2a and ‐ 2b . In some cases, the (P*)‐ and (M*)‐configured epimers were isolated and characterized (Scheme 1). Base‐catalyzed cleavage of 2,3‐endo‐ 2 gave the corresponding 2,3‐diols 3 , which were further transformed via reductive cleavage of their dimesylates 4 into the benzo[a]heptalenes 5a and 5b , respectively (Scheme 2). In another reaction sequence, the 2,3‐diols 3 were converted into their cyclic carbonothioates 6 , which on treatment with (EtO)₃P gave the deoxygenated 1,4‐dihydro‐1,4‐epoxybenzo[d]heptalenes 7 . These were rearranged by acid catalysis into the benzo[a]heptalen‐4‐ols 8a and 8b , respectively (Scheme 2). Cyclocarbonate 2,3‐endo‐ 2b reacted with lithium diisopropylamide (LDA) at ?70° under regioselective ring opening to the 3‐hydroxy‐substituted benzo[d]heptalen‐2‐yl carbamate 2,3‐endo‐ 9b (Scheme 3). The latter was O‐methylated to 2,3‐endo‐(P*)‐ 10b . The further way, to get finally the benzo[a]heptalene 13b with MeO groups in 1,2,3‐position, could not be realized due to the fact that we found no way to cleave the carbamate group of 2,3‐endo‐(P*)‐ 10b without touching its 1,4‐epoxy bridge (Scheme 3). The reaction of 1a with PSA in toluene at 120° was successful, in a way that we found regioisomeric as well as epimeric cycloadducts (Scheme 5). Unfortunately, the attempts to rearrange the products under strong‐base catalysis as it had been shown successfully with other furan–PSA adducts were unsuccessful (Scheme 4). The thermal cycloaddition reaction of 1a and 1b with AAN yielded again regioisomeric and epimeric adducts, which could easily be transformed into the corresponding 2‐ and 3‐oxo products (Scheme 6). Only the latter ones could be rearranged with Ac₂O/H₂SO₄ into the corresponding benzo[a]heptalene‐3,4‐diol diacetates 20a and 20b , respectively, or with trimethylsilyl trifluoromethanesulfonate (TfOSiMe₃/Et₃N), followed by treatment with NH₄Cl/H₂O, into the corresponding benzo[a]heptalen‐3,4‐diols 21a and 21b (Scheme 7). The thermal cycloaddition reaction of 1 with ZSE in toluene gave the cycloadducts 2,3‐exo‐ 22a and ‐ 22b as well as 2‐exo,3‐endo‐ 22c in high yields (Scheme 8). All three adducts eliminated, by treatment with base, benzenesulfinic acid and yielded the corresponding 3‐(phenylsulfonyl)‐1,4‐epoxybenzo[d]heptalenes 25 . The latter turned out to be excellent Michael acceptors for H₂O₂ in basic media (Scheme 9). The Michael adducts lost H₂O on treatment with Ac₂O in pyridine and gave the 3‐(phenylsulfonyl)benzo[d]heptalen‐2‐ones 28a and 3‐exo‐ 28b , respectively. Rearrangement of these compounds in the presence of Ac₂O/AcONa lead to the formation of the corresponding 3‐(phenylsulfonyl)benzo[a]heptalene‐1,2‐diol diacetates 30a and 30b , which on treatment with MeONa/MeI gave the corresponding MeO‐substituted compounds 31a and 31b . The reductive elimination of the PhSO₂ group led finally to the 1,2‐dimethoxybenzo[a]heptalenes 32a and 32b . Deprotonation experiments of 32a with t‐BuLi/N,N,N′,N′‐tetramethylethane‐1,2‐diamine (tmeda) and quenching with D₂O showed that the most acid C? H bond is H? C(3) (Scheme 9). Some of the new structures were established by X‐ray crystal‐diffraction analyses (cf. Figs. 1, 3, 4, and 5). Moreover, nine of the new benzo[a]heptalenes were resolved on an anal. Chiralcel OD‐H column, and their CD spectra were measured (cf. Figs. 8 and 9). As a result, the 1,2‐dimethoxybenzo[a]heptalenes 32a and 32b showed unexpectedly new Cotton‐effect bands just below 300 nm, which were assigned to chiral exciton coupling between the heptalene and benzo part of the structurally highly twisted compounds. The PhSO₂‐substituted benzo[a]heptalenes 30b and 31b showed, in addition, a further pair of Cotton‐effect bands in the range of 275–245 nm, due to chiral exciton coupling of the benzo[a]heptalene chromophore and the phenylsulfonyl chromophore (cf. Fig. 10).     

Studies for a Variable Synthesis of Colchicinoids: Construction of Ring A on a Heptalene Moiety

It is shown that heptalene‐4,5‐dicarboxylates 2 , which react with lithiated methyl sulfones mainly in a Michael fashion at C(3) (cf. Scheme 2), so that the formation of 3‐sulfonylbenzo[a]heptalene‐2,4‐diols 5 is repressed or completely suppressed, can be transformed into corresponding pseudo‐esters 15 (Scheme 4). These pseudo‐esters, on treatment with lithiated methyl sulfones, followed by addition of BuLi, furnish the 3‐sulfonylbenzo[a]heptalene‐2,4‐diols 5 in excellent‐to‐moderate yields without formation of Michael adducts or their follow‐up products (cf. Scheme 5 and 6). The reaction of the pseudo‐ester 15a with Li[¹³C]H₂SO₂Ph, followed by treatment with non‐labeled LiCH₂SO₂Ph and then BuLi, led to the exclusive formation of 3‐(phenylsulfonyl)‐[1‐¹³C]benzo[a]heptalene‐2,4‐diol 5a* (Scheme 9). This experiment demonstrates that the (phenylsulfonyl)acetyl groups at C(4) and C(5) of the heptalene core retain their individual positions in the course of the benzo[a]heptalene‐2,4‐diol formation. These findings are only compatible with an intramolecular rearrangement mechanism as depicted in Scheme 10.     

Thermal Reaction of Azulene and Some of Its Symmetrically Substituted Methyl Derivatives with Dimethyl Acetylenedicarboxylate

It is shown that azulene ( 1 ) and dimethyl acetylenedicarboxylate (ADM) in a fourfold molar excess react at 200° in decalin to yield, beside the known heptalene- ( 5 ) and azulene-1,2-dicarboxylates ( 6 ), in an amount of 1.6% tetramethyl (1RS,2RS,5SR,8RS)-tetracyclo[6.2.2.2^2,50^1,5]tetradeca-3,6,9,11,13-pentaene-3,4,9,10-tetracarboxylate(‘anti’-7) as a result of a SHOMO (azulene)/LUMO(ADM)-controlled addition of ADM to the seven-membered ring of 1 followed by a Diels-Alder reaction of the so formed tricyclic intermediate 16 (cf. Scheme 3) with a second molecule of ADM. The structure of ‘anti’-7 was confirmed by an X-ray diffraction analysis. Similarly, the thermal reaction of 5,7-dimehtylazulene ( 3 ) with excess ADM in decalin at 120° led to the formation of ca. 1% of ‘anti’- 12 , the 7,12-dimethyl derivative of‘anti’-7, beside of the corresponding heptalene- 10 and azulene-1,2-dicaboxylated (cf Scheme 2). The introduction of Me groups at C(1)and C(3)of azulene ( 1 ) and its 5,7-dimethyl derivative 3 strongly enhance the thermal formation of the corresponding tetracyclic compound. Thus, 1,3-dimethylazulene ( 2 ) in the presence of a sevenfold molar excess of ADM at 200° yielded 20% of ‘anti’- 9 beside an equal amount of dimethyl 3-mehtylazulene-1,2-dicarboxylate ( 8 ;cf. Scheme 1), and 1,3,5,7-tetramethylazulene ( 4 ) with a fourfold molar excess of ADM AT 200° gave a yield of 37% of‘anti’- 15 beside small amount of the corresponding heptalene- 13 and azulene-1,2-dicarboxylates 14 (cf.Scheme 2).     

Studies on the composition and kinetics of chromium(III)-alanine system

Kinetics of the complex formation of chromium(III) with alanine in aqueous medium has been studied at 45, 50, and 55°C, pH 3.3–4.4, and μ = 1 M (KNO₃). Under pseudo first-order conditions the observed rate constant (k_obs) was found to follow the rate equation: Values of the rate parameters (k_an, k, K_IP, and K) were calculated. Activation parameters for anation rate constants, ΔH^≠(k_an) = 25 ± 1 kJ mol^?1, ΔH^≠(k) = 91 ± 3 kJ mol^?1, and ΔS^≠(k_an) = ?244 ± 3 JK^?1 mol^?1, ΔS^≠(k) = ?30 ± 10 JK^?1 mol^?1 are indicative of an (I_a) mechanism for k_an and (I_d) mechanism for k routes (‥substrate Cr(H₂O) is involved in the k route whereas Cr(H₂O)₅OH²⁺ is involved in k′ route). Thermodynamic parameters for ion-pair formation constants are found to be ΔH°(K_IP) = 12 ± 1 kJ mol^?1, ΔH°(K) = ?13 ± 3 kJ mol^?1 and ΔS°(K_IP) = 47 ± 2 JK^?1 mol^?1, and ΔS°(K) = 20 ± 9 JK^?1 mol^?1.