首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
A numerical technique is developed for the simulation of free surface flows and interfaces. This technique combines the strength on the finite element method (FEM) in calculating the field variables for a deforming boundary and the versatility of the volume-of-fluid (VOF) technique in advection of the fluid interfaces. The advantage of the VOF technique is that it allows the simulation of interfaces with large deformations, including surface merging and breaking. However, its disadantage is that is solving the flow equations, it cannot resolve interfaces smaller than the cell size, since information on the subgrid scale is lost. Therefore the accuracy of the interface reconstruction and the treatment of the boundary conditions (i.e. viscous stresses and surface tension forces) become grid-size-dependent. On the other hand, the FEM with deforming interface mesh allows accurate implementation of the boundary conditions, but it cannot handle large surface deformations occurring in breaking and merging of liquid regions. Combining the two methods into a hybrid FEM-VOF method eliminates the major shortcomings of both. The outcome is a technique which can handle large surface deformations with accurate treatment of the boundary conditions. For illustration, two computational examples are presented, namely the instability and break-up of a capillary jet and the coalescence collision of two liquid drops.  相似文献   

2.
This paper proposes a hybrid volume-of-fluid (VOF) level-set method for simulating incompressible two-phase flows. Motion of the free surface is represented by a VOF algorithm that uses high resolution differencing schemes to algebraically preserve both the sharpness of interface and the boundedness of volume fraction. The VOF method is specifically based on a simple order high resolution scheme lower than that of a comparable method, but still leading to a nearly equivalent order of accuracy. Retaining the mass conservation property, the hybrid algorithm couples the proposed VOF method with a level-set distancing algorithm in an implicit manner when the normal and the curvature of the interface need to be accurate for consideration of surface tension. For practical purposes, it is developed to be efficiently and easily extensible to three-dimensional applications with a minor implementation complexity. The accuracy and convergence properties of the method are verified through a wide range of tests: advection of rigid interfaces of different shapes, a three-dimensional air bubble's rising in viscous liquids, a two-dimensional dam-break, and a three-dimensional dam-break over an obstacle mounted on the bottom of a tank. The standard advection tests show that the volume advection algorithm is comparable in accuracy with geometric interface reconstruction algorithms of higher accuracy than other interface capturing-based methods found in the literature. The numerical results for the remainder of tests show a good agreement with other numerical solutions or available experimental data. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

3.
In this paper, we introduce numerical methods that can simulate complex multiphase flows. The finite volume method, applying Cartesian cut-cell is used in the computational domain, containing fluid and solid, to conserve mass and momentum. With this method, flows in and around any geometry can be simulated without complex and time consuming meshing. For the fluid region, which involves liquid and gas, the ghost fluid method is employed to handle the stiffness of the interface discontinuity problem. The interaction between each phase is treated simply by wall function models or jump conditions of pressure, velocity and shear stress at the interface. The sharp interface method “coupled level set (LS) and volume of fluid (VOF)” is used to represent the interface between the two fluid phases. This approach will combine some advantages of both interface tracking/capturing methods, such as the excellent mass conservation from the VOF method and good accuracy of interface normal computation from the LS function. The first coupled LS and VOF will be generated to reconstruct the interface between solid and the other materials. The second will represent the interface between liquid and gas.  相似文献   

4.
This paper describes a finite‐volume volume‐of‐fluid (VOF) method for simulating viscous free surface flows on dynamically adaptive quadtree grids. The scheme is computationally efficient in that it provides relatively fine grid resolution at the gas–liquid interface and coarse grid density in regions where flow variable gradients are small. Special interpolations are used to ensure volume flux conservation where differently sized neighbour cells occur. The numerical model is validated for advection of dyed fluid in unidirectional and rotating flows, and for two‐dimensional viscous sloshing in a rectangular tank. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

5.
In this paper, we apply two purely irrotational theories of the motion of a viscous fluid, namely, viscous potential flow (VPF) and the dissipation method to the problem of the decay of waves on the surface of a sphere. We treat the problem of the decay of small disturbances on a viscous drop surrounded by gas of negligible density and viscosity and a bubble immersed in a viscous liquid. The instantaneous velocity field in the viscous liquid is assumed to be irrotational. In VPF, viscosity enters the problem through the viscous normal stress at the free surface. In the dissipation method, viscosity appears in the dissipation integral included in the mechanical energy equation. Comparisons of the eigenvalues from VPF and the dissipation approximation with those from the exact solution of the linearized governing equations are presented. The results show that the viscous irrotational theories exhibit most of the features of the wave dynamics described by the exact solution. In particular, VPF and DM give rise to a viscous correction for the frequency that determines the crossover from oscillatory to monotonically decaying waves. Good to reasonable quantitative agreement with the exact solution is also shown for certain ranges of modes and dimensionless viscosity: For large viscosity and short waves, VPF is a very good approximation to the exact solution. For ‘small’ viscosity and long waves, the dissipation method furnishes the best approximation.  相似文献   

6.
An innovative Flexible Coupled Level Set (LS) and Volume of Fluid (VOF) algorithm (flexCLV) to simulate two-phase flows at the microscale on unstructured and non-uniform meshes is proposed. The method combines the advantages of the VOF method in terms of mass conservation and the LS method in terms of accuracy of the surface tension implementation and can handle both 2D and 3D domains discretized by either structured hexaedra or unstructured tetrahedral grids with high aspect ratio elements, thus guaranteeing flexibility and robustness. The method is implemented within the VOF-based OpenFOAM’s solver interFoam, which is retained as the base algorithm for the interface advection, while the surface tension force is calculated by using the level set function reconstructed from the VOF’s fraction. The method is first validated in static flow conditions by simulating a circular bubble at equilibrium and then in dynamic flow conditions by studying a freely bubble rising in both 2D and 3D domains discretized by both structured and unstructured meshes. The proposed flexCLV algorithm is then used to simulate the dynamics of confined bubbles in circular microchannels in the low capillary number regime. 2D and 3D mesh grids with high aspect ratio elements are utilized to discretized the liquid film at the tube’s walls. The numerical results are compared with the available literature and simulations performed with the original interFoam solver in terms of bubble shape and velocity, thickness of the liquid film and amplitude of the bubble tail oscillations. Results compare very well with the experimental measurements and demonstrate the superior accuracy of the coupled flexCLV method with respect to the original VOF method when surface tension and accurate interface representation play a fundamental role. Importantly, the present study also provides a precious insight on the time-dependent patterns appearing on the bubble surface in the visco-inertial regime, which could be here investigated in detail.  相似文献   

7.
8.
A new model coupling two basic models, the model based on interface tracking method and the two-fluid model, for simulating gas–liquid two-phase flow is presented. The new model can be used to simulate complex multiphase flow in which both large-length-scale interface and small-length-scale gas–liquid interface coexist. By the physical state and the length scale of interface, three phases are divided, including the liquid phase, the large-length-scale-interface phase (LSI phase) and the small-length-scale-interface phase (SSI phase). A unified solution framework shared by the two basic models is built, which makes it convenient to perform the solution process. Based on the unified solution framework, the modified MCBA–SIMPLE algorithm is employed to solve the Navier–Stokes equations for the proposed model. A special treatment called “volume fraction redistribution” is adopted for the special grids containing all three phases. Another treatment is proposed for the advection of large-length-scale interface when some portion of SSI phase coalesces into LSI phase. The movement of the large-length-scale interface is evaluated using VOF/PLIC method. The proposed model is equivalent to the two-fluid model in the zone where only the liquid phase and the SSI phase are present and to the model based on interface tracking method in the zone where only the liquid phase and the LSI phase are present. The characteristics of the proposed model are shown by four problems.  相似文献   

9.
SH 波入射时半空间界面裂纹与圆形衬砌的相互作用   总被引:1,自引:0,他引:1  
利用复变函数和Green函数法研究了双相介质半空间界面裂纹及界面附近圆形衬砌对SH 波的散射与动应力集中问题。首先,采用映像思想构造满足自由边界条件的散射波表达式,进而求解所需的Green函数;其次,采用裂纹切割技术构造裂纹,并根据连续性条件建立了求解该问题的无穷代数方程组;最后,给出了不同入射波数时界面裂纹与衬砌的相互作用。结果表明,裂纹的存在显著放大了衬砌界面的动应力集中。  相似文献   

10.
In this paper, we study an interface transport scheme of a two‐phase flow of an incompressible viscous immiscible fluid. The problem is discretized by the characteristics method in time and finite elements method in space. The interface is captured by the level set function. Appropriate boundary conditions for the problem of mold filling are investigated, a new natural boundary condition under pressure effect for the transport equation is proposed, and an algorithm for computing the solution is presented. Finally, numerical experiments show and validate the effectiveness of the proposed scheme. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

11.
采用光滑粒子动力学SPH方法建立液滴冲击弹性基底的流固耦合数值模型,给出描述粘性流体和弹性固体运动的SPH离散方程和数值处理格式,引入人工耗散项来抑制标准SPH方法的数值震荡。为模拟液滴的表面张力效应,通过精确检测边界粒子,采用拉格朗日插值方法计算表面法向量和曲率,结合界面理论中的连续表面力CSF方法,建立了适用于自由表面液滴的表面力模型,方形液滴变形的模拟结果与拉普拉斯理论解吻合较好。随后,采用SPH流固耦合模型模拟1.0 mm直径水滴以不同速度(0.2 m/s~3.0 m/s)冲击两种薄板型基底,分析了基底弹性变形对液滴铺展、收缩以及回弹行为的影响。  相似文献   

12.
The Navier–Stokes–Boussinesq equations governing the transport of momentum, mass and heat in a non-isothermal liquid bridge with a temperature-dependent surface tension are solved using a vorticity-stream-function formulation together with a non-orthogonal co-ordinate transformation. The equations are discretized using a pseudo-unsteady semi-implicit finite difference scheme and are solved by the ADI method. A Picard-type iteration is adopted which consists of inner and outer iterative processes. The outer iteration is used to update the shape of the free surface. Two schemes have been used for the outer iteration; both use the force balance normal to the free surface as the distinguished boundary condition. The first scheme involves successive approximation by the direct solution of the distinguished boundary condition. The second scheme uses the artificial force imbalance between the fluid pressure, viscous and capillary forces at the free surface which arises when the boundary condition for force balance normal to the surface is not satisfied. This artificial imbalance is then used to change the surface shape until the distinguished boundary condition is satisfied. These schemes have been used to examine a variety of model liquid bridge situations including purely thermocapillary-driven flow situations and mixed thermocapillary- and bouyancy-driven flow.  相似文献   

13.
A new numerical algorithm for attached cavitation flows is developed. A cavitation model is implemented in a viscous Navier–Stokes solver. The liquid–vapour interface is assumed as a free surface boundary of the computation domain. Its shape is determined with an iterative procedure to match the cavity surface to a constant pressure boundary. The pressure distribution, as well as its gradient along the wall, is taken into account in updating the cavity shape iteratively. A series of computations are performed for the cavitating flows across three kinds of headform/cylinder bodies: conic, ogival and hemispheric heads. A range of cavitation numbers is investigated for each headform/cylinder body. The obtained results are reasonable and the iterative procedure of cavity shape updating is quite stable. The superiority of the developed cavitation model and algorithm is demonstrated. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

14.
A mixed boundary element and finite element numerical algorithm for the simultaneous prediction of the electric fields, viscous flow fields, thermal fields and surface deformation of electrically conducting droplets in an electrostatic field is described in this paper. The boundary element method is used for the computation of the electric potential distribution. This allows the boundary conditions at infinity to be directly incorporated into the boundary integral formulation, thereby obviating the need for discretization at infinity. The surface deformation is determined by solving the normal stress balance equation using the weighted residuals method. The fluid flow and thermal fields are calculated using the mixed finite element method. The computational algorithm for the simultaneous prediction of surface deformation and fluid flow involves two iterative loops, one for the electric field and surface deformation and the other for the surface tension driven viscous flows. The two loops are coupled through the droplet surface shapes for viscous fluid flow calculations and viscous stresses for updating the droplet shapes. Computing the surface deformation in a separate loop permits the freedom of applying different types of elements without complicating procedures for the internal flow and thermal calculations. Tests indicate that the quadratic, cubic spline and spectral boundary elements all give approximately the same accuracy for free surface calculations; however, the quadratic elements are preferred as they are easier to implement and also require less computing time. Linear elements, however, are less accurate. Numerical simulations are carried out for the simultaneous solution of free surface shapes and internal fluid flow and temperature distributions in droplets in electric fields under both microgravity and earthbound conditions. Results show that laser heating may induce a non-uniform temperature distribution in the droplets. This non-uniform thermal field results in a variation of surface tension along the surface of the droplet, which in turn produces a recirculating fluid flow in the droplet. The viscous stresses cause additional surface deformation by squeezing the surface areas above and below the equator plane.  相似文献   

15.
We present experimental results showing that large amplitude capillary waves at a liquid–vapour interface substantially enhance the interfacial heat and mass transfer. The experiments have been conducted in a circular cylinder that is partially filled with a wetting liquid of low boiling point temperature and pressurized by its vapour. The interfacial capillary waves are sub-harmonically excited by oscillating the circular cylinder at 50 Hz with forcing amplitude A in the direction normal to the liquid surface. The upper part of the test cell containing the vapour is heated to a temperature slightly below the boiling point temperature at the operating pressure. When the interface is at rest, the pressure decrease due to condensation is small. However, in the presence of interfacial capillary waves the rate of pressure decrease is substantial. The results show that the vapour condensation rate with respect to the diffusive vapour flux at an undisturbed interface, which is a Nusselt number, increases with the square of the wave amplitude that is proportional to the forcing amplitude. A model is developed that expresses the pressure variation in terms of Jacob number, the temperature gradient in the liquid at the interface and the capillary wave motion. This model allows extrapolation of the results to other fluids and configurations.  相似文献   

16.
Viscous stress contributes to momentum transfer between two phases, which plays an important role in both industrial applications and environmental processes. Near a wavy interface, the flow is modulated and produces a spatially non-uniform normal and tangential viscous stress. This study presents measurements of these stresses at a liquid–gas interface populated with two-dimensional millimeter scale waves performed with multiphase particle image velocimetry. Large datasets enable conditional phase-averaging of the data based on wave steepness, which increases the precision of the results and allows statistical analysis. For the first time at this scale, the spatial distribution of normal and tangential viscous stress is obtained for a large range of wave steepness (ak = 0–1, with a the amplitude and k the wavenumber). As the steepness increases, the mean shear stress over a wavelength decreases in magnitude, while the normal viscous stress increases. These trends are linear for ak < 0.6, and correlations are proposed. At ak > 0.7, flow separation is observed in the gas phase near the troughs and drastically alters the viscous stress distribution.  相似文献   

17.
A study is made of the stability of the plane-parallel flow of a viscous liquid in a layer with a free boundary, under weightless conditions. The motion of the liquid is due to the dependence of the surface tension on the temperature. An exact solution for an unperturbed boundary is obtained by the same method used in [1], but with a more general boundary condition for the temperature. A study of the stability was carried out by the method of small vibrations, taking account of the perturbation of the free boundary. The article discusses the asymptotic behavior of long waves at small Reynolds numbers, and the conditions for instability are found.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 6, pp. 94–98, November–December, 1971.  相似文献   

18.
We model the hydrodynamics of a shear cell experiment with an immiscible nematic liquid crystal droplet in a viscous fluid using an energetic variational approach and phase-field methods [86]. The model includes the coupled system for the flow field for each phase, a phase-field function for the diffuse interface and the orientational director field of the liquid crystal phase. An efficient numerical scheme is implemented for the two-dimensional evolution of the shear cell experiment for this initial data. The same model reduces to an immiscible viscous droplet in a viscous fluid, which we simulate first to compare with other numerical and experimental behavior. Then we simulate drop deformation by varying capillary number (independent of liquid crystal physics), liquid crystal interfacial anchoring energy and Oseen–Frank distortional elastic energy. We show the number of eventual droplets (one to several) and “beads on a string” behavior are tunable with these three physical parameters. All stable droplets possess signature quadrupolar shear and normal stress distributions. The liquid crystal droplets always possess a global surface defect structure, called a boojum, when tangential surface anchoring is imposed. Boojums [79], [32] consist of degree +1/2 and ?1/2 surface defects within a bipolar global orientational structure.  相似文献   

19.
Green’s functions for transversely isotropic thermoelastic biomaterials are established in the paper. We first express the compact general solutions of transversely isotropic thermoelastic material in terms of harmonic functions and introduce six new harmonic functions. The three-dimensional Green’s function having a concentrated heat source in steady state is completely solved using these new harmonic functions. The analytical results show some new phenomena of temperature and stress distributions at the interface. The temperature contours are normal to the interface for the isotropic material but not for the orthotropic one. The normal stress contours are parallel to the interface at the boundary in the isotropic region only and shear failure is most likely at the heat source due to the highly degenerated direction of shear stress contours.  相似文献   

20.
A stencil-like volume of fluid (VOF) method is proposed for tracking free interface. A stencil on a grid cell is worked out according to the normal direction of the interface, in which only three interface positions are possible in 2D cases, and the interface can be reconstructed by only requiring the known local volume fraction information. On the other hand, the fluid-occupying-length is defined on each side of the stencil, through which a unified fluid-occupying volume model and a unified algorithm can be obtained to solve the interface advection equation. The method is suitable for the arbitrary geometry of the grid cell, and is extendible to 3D cases. Typical numerical examples show that the current method can give "sharp" results for tracking free interface.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号