Akt is involved in the inhibition of cell proliferation by EGF

Axin is a negative regulator of the Wnt/beta-catenin pathway and is involved in the regulation of axis formation and proliferation. Involvement of Axin in the regulation of other signaling pathways is poorly understood. In this study, we investigated the involvement of Akt in growth regulation by Axin in L929 fibroblasts stimulated by EGF. Akt activity was increased by EGF treatment and Ras activation, respectively. Both the EGF- and Ras-induced Akt activations were abolished by Axin induction, as revealed by both Western blot and immunocytochemical analyses. The proliferation and Akt activation induced by EGF were decreased by Axin induction, and the effects of EGF were abolished by treatment of an Akt-specific inhibitor. Therefore, Axin inhibits EGF-induced proliferation of L929 fibroblasts by blocking Akt activation.     

Fermented Oyster Extract Attenuated Dexamethasone-Induced Muscle Atrophy by Decreasing Oxidative Stress

It is well known that oxidative stress induces muscle atrophy, which decreases with the activation of Nrf2/HO-1. Fermented oyster extracts (FO), rich in γ-aminobutyric acid (GABA) and lactate, have shown antioxidative effects. We evaluated whether FO decreased oxidative stress by upregulating Nrf2/HO-1 and whether it decreased NF-κB, leading to decreased IL-6 and TNF-α. Decreased oxidative stress led to the downregulation of Cbl-b ubiquitin ligase, which increased IGF-1 and decreased FoxO3, atrogin1, and Murf1, and eventually decreased muscle atrophy in dexamethasone (Dexa)-induced muscle atrophy animal model. For four weeks, mice were orally administered with FO, GABA, lactate, or GABA+Lactate, and then Dexa was subcutaneously injected for ten days. During Dexa injection period, FO, GABA, lactate, or GABA+Lactate were also administered, and grip strength test and muscle harvesting were performed on the day of the last Dexa injection. We compared the attenuation effect of FO with GABA, lactate, and GABA+lactate treatment. Nrf2 and HO-1 expressions were increased by Dexa but decreased by FO; SOD activity and glutathione levels were decreased by Dexa but increased by FO; NADPH oxidase activity was increased by Dexa but decreased by FO; NF-κB, IL-6, and TNF-α activities were increased by Dexa were decreased by FO; Cbl-b expression was increased by Dexa but restored by FO; IGF-1 expression was decreased by Dexa but increased by FO; FoxO3, Atrogin-1, and MuRF1 expressions were increased by Dexa but decreased by FO. The gastrocnemius thickness and weight were decreased by Dexa but increased by FO. The cross-sectional area of muscle fiber and grip strength were decreased by Dexa but increased by FO. In conclusion, FO decreased Dexa-induced oxidative stress through the upregulation of Nrf2/HO-1. Decreased oxidative stress led to decreased Cbl-b, FoxO3, atrogin1, and MuRF1, which attenuated muscle atrophy.     

铂修饰光阴极及其在纳晶太阳能电池中的应用

分别用真空镀膜法、热分解法和电化学法制备了铂金修饰导电玻璃,并以此作为光阴极组装了染料敏化纳晶TiO₂太阳能电池.用SEM观察了铂金修饰导电玻璃表面形貌,发现用真空镀膜法制备的铂金膜结构缺陷多、不均匀,存在较多的污点.用热分解法制备的铂金膜具有多孔状结构,但存在较多的有机物分解的残留物.用电镀法制备的铂金膜结构均匀、排列规则、缺陷少、污染少.测定了所制备铂金膜的电阻,结果表明由电镀法所制得的铂金膜电阻最小,用热解法和真空镀膜法制得的铂金膜电阻较大.测定了DSSC电池的光电性能,发现用电镀法制得的铂金膜的催化性能最好,大大提高了DSSC电池的性能;其次是热分解法,由真空镀膜法制备的铂金膜对电池的性能没有多大改善.     

湿化学法制备硅纳米线阵列及其光电化学产氢性能分析

为了探究不同方法条件下制备的硅纳米线阵列电极产氢性能异同,文中分别采用了两步金属辅助催化无电刻蚀法、一步金属辅助催化无电刻蚀法以及阳极氧化法来制备硅纳米线阵列用作为光电分解水电池光阴极材料。通过FESEM、XRD和UVVis-IR DRS等手段对实验样品的形貌、晶型、减反性表征,发现相比于其他2种方法所得硅纳米线样品,两步金属辅助催化无电刻蚀法制备的硅纳米线结构晶型保持更好,表面缺陷更少。光电化学测试表明两步金属辅助催化无电刻蚀法制备的硅纳米线光电化学性能表现最优,其光电流密度值是一步法的4倍,阳极氧化法的40倍;转移电荷电阻仅是一步法制备的硅纳米线阵列阻值的1/3,阳极氧化法制备的1/1 000。     

Kinetic studies of free-radical polymerizations of I-vinylimidazole initiated by benzoyl peroxide and azoisobutyronitrile

Kinetic features of radical polymerizations of 1-vinylimidazole initiated by azoisobutyronitrile and by benzoyl peroxide have been investigated in several solvents and at several temperatures. Polymerizations initiated both by the azo compound and by the peroxide have abnormally low monomer exponents and abnormally high initiator exponents, features first noted by Bamford and Schofield and attributed by them to degradative addition of monomer. Polymerizations initiated by benzoyl peroxide appear to be further complicated by induced decomposition of the initiator; conversion vs time curves, especially for polymerizations in dimethylformamide and particularly at 80°C, show pronounced curvature. These curves can be approximately interpreted in terms of the Tobolsky theory of “dead-end” radical polymerization.     

Friedel-Crafts Polymers. 6. Friedel-Crafts Polycondensation of p-Xylylerte Dibromide with Salicylic Acid and β-Resorcyiic Acid

Polymers were prepared by condensing p-xylylene dibromide separately with salicylic acid and β-resorcylic acid in the presence of anhydrous ferric chloride in dioxane. The polymer samples_were characterized by elemental analysis, by IR spectral study, by M determined by vapor pressure osmometry, by nonaqueous conducto-metric titration in pyridine, by TGA in air, and by viscosity measurements of polymer solutions in DMF. Polymeric metal chelates of Cu²⁺, Co²⁺, Zn²⁺, Ni²⁺, and Fe³⁺ with polymer samples were prepared and characterized by elemental analysis, by IR spectral study, and by TGA in air. The chelation ion-exchange properties of the polymer samples were studied by employing the batch equilibration method.     

Oxidations and reductions of iron-cyanogen compounds of cobalt,nickel, cadmium and zinc

I. Cobalt ferrocyanide is oxidized by bromine water, by nitrous acid or by hydrogen peroxide in presence of acids to cobalt ferroferricyanide (cobalt Prussian blue), while cobalt ferricyanide is reduced by sulfurous acid to cobalt Prussian blue.II. Nickel ferrocyanide is oxidized by nitrous acid or by hydrogen peroxide in presence of acids to nickel ferricyanide.III. Nickel ferrocyanide and cadmium ferrocyanide are oxidized by bromine water to the ferricyanides.IV. The ferricyanides of nickel, cadmium and zinc are reduced by sulfurous acid to the ferrocyanides.     

Synthesis, properties, and applications of urethane-modified acrylated poly(ester-amide)s

Epoxy resin-based unsaturated poly(ester-amide) resins (UPEAs) were treated with acryloyl chloride to afford acrylated UPEAs resins (AUPEAs). Urethane-based acrylated poly(ester-amide)s prepared by reaction with diisocyanate were characterized by elemental analysis, by molecular weight determination (by vapour pressure osmometry), by IR spectral study, and by thermogravimetry. The curing of interacting blends was monitored by differential scanning calorimetry (DSC). On the basis of DSC data in-situ glass-reinforced composites were prepared from the resulting materials and their mechanical, electrical, and chemical properties were characterized. Unreinforced blends were characterized by thermogravimetry.     

增塑化学微交联聚氯乙烯中化学交联和物理交联的协同作用

由氯乙烯／ 邻苯二甲酸二烯丙基酯（ＶＣ／ＤＡＰ） 悬浮共聚合成了化学微交联聚氯乙烯（ＰＶＣ） 树脂,并进行增塑加工．共聚得到的化学交联ＰＶＣ 具有溶胶／ 凝胶分配特性,交联密度较低;化学交联ＰＶＣ 的溶胶和凝胶均存在分子链缠结作用,尤其当凝胶含量较高时,物理缠结对凝胶交联密度有较大贡献．化学交联对增塑ＰＶＣ 结晶性的影响较小,因此在增塑化学微交联ＰＶＣ 中同时存在化学交联网络和以分子链物理缠结点和微晶为交联点的物理交联网络,两者协同影响增塑ＰＶＣ 材料的性能．     

湿化学法制备硅纳米线阵列及其光电化学产氢性能分析

为了探究不同方法条件下制备的硅纳米线阵列电极产氢性能异同,文中分别采用了两步金属辅助催化无电刻蚀法、一步金属辅助催化无电刻蚀法以及阳极氧化法来制备硅纳米线阵列用作为光电分解水电池光阴极材料.通过FESEM、XRD和UV-Vis-IRDRS等手段对实验样品的形貌、晶型、减反性表征,发现相比于其他2种方法所得硅纳米线样品,两步金属辅助催化无电刻蚀法制备的硅纳米线结构晶型保持更好,表面缺陷更少.光电化学测试表明两步金属辅助催化无电刻蚀法制备的硅纳米线光电化学性能表现最优,其光电流密度值是一步法的4倍,阳极氧化法的40倍;转移电荷电阻仅是一步法制备的硅纳米线阵列阻值的1/3,阳极氧化法制备的1/1000.     

Determination of Mg, Ti and Cl in Ziegler-Natta catalysts by WDXRF

A method for determination of Mg, Ti and Cl in Ziegler-Natta (ZN) catalysts by wavelength dispersive X-ray fluorescence (WDXRF) spectrometry was developed. For comparative reasons, Ti was determined by spectrophotometry, Mg by complexometry and Cl by argentometric titration. Direct pressing was shown to be unsuitable for sample preparation due to catalyst decomposition. For Ti and Mg measurements, catalyst samples were calcinated at 1000 °C and pressed at 275 MPa. Their determination by the fundamental parameters based on the Ti Ka line measurement was shown to be equivalent to those results obtained by univariate calibration or by the classical methods. Cl was determined by aqueous extraction, followed by deposition on a support. Chloride loss was observed. Fixation of Cl as AgCl on polytetrafluoroethylene (FHLC) millipore membrane afforded the best results. Nevertheless, measurements by WDXRF were shown to be inferior to those obtained by argentometric titration.     

方波伏安法评估聚苯胺膜修饰电极的电荷传输速度

研究导电聚合物的电荷传输机制与速度对于其在应用方面的研究极为重要［‘］．例如在电池的研究中，充放电的速度决定于导电聚合物的电荷传输速度；在电致变色器件的研究中，响应时间也是决定于导电聚合物在氧化还原态间的变化速度，即电荷传输速度．显然较低的电荷传输速度不利于器件的实用化，因此人们必须找到一种能够迅速准确评价电荷传输速度的方法，由于导电聚合物是一个特殊的体系，用一般的电化学方法对其电荷传输速度进行测定时常常遇到这样或那样的问题［‘j．一般说来，导电聚合物的氧化还原过程中均伴随着抗衡离子的运动．体系…     

Preparation of cyclopentadienes and diazocyclopentadienesvia cyclopentenolones and cyclopentenones

The structure and stereochemistry of the cyclopentenolones obtained by condensation of dialkyl ketones with benzil have been studied by NMR spectroscopy. These enolones were converted into cyclopentenones and cyclopentadienes. Alkyl-substituted cyclopentadienes required phenyllithium to effect their conversion by toluenesulphonyl azide into diazo-cyclopentadienes; otherwise piperidine sufficed as base catalyst.2,3,4-Triphenyldiazocyclopentadiene was simply procured by reaction of the condensation product of benzil and phenylacetone with toluenesulphonylhydrazone followed by alkali. Cyclohexyl- and methoxy-triphenylcyclopentadienes were prepared by photolytic decomposition of diazotriphenylcyclopentadiene in cyclohexane or methanol respectively.     

Friedel-Crafts Polymers. 5. Friedel-Crafts Polycondensation of p-Xylylene Dichloride with Salicylaldehyde and o-Hydroxyacetophenone

Polymers were prepared by condensing p-xylylene dichloride (PXDC) separately with salicylaldehyde (SAL) and o-hydroxy-acetophenone (OHAC) in the presence of anhydrous ferric chloride in dioxane. The polymer samples were characterized by elemental analysis, measurement of their M by vapor pressure osmometry, by nonaqueous conductometric titration in pyridine, by IR spectral study, by TGA in air, and by viscometric study in DMF. The ion-exchange capacities of these polymeric ligands for selected metal ions were measured by the batch equilibration method and compared. Polymeric metal chelates of PXDC-SAL and PXDC-OHAC polymer samples with Cu^{2 +}, Ni²⁺, Co²⁺, Fe³ and Zn^{2 +} were prepared and characterized by elemental analyses, by IR spectral study, and by thermal analyses.     

New designer drug 2,5-dimethoxy-4-ethylthio-beta-phenethylamine (2C-T-2): studies on its metabolism and toxicological detection in rat urine using gas chromatography/mass spectrometry

Studies are described on the metabolism and the toxicological analysis of the phenethylamine-derived designer drug 2,5-dimethoxy-4-ethylthio-beta-phenethylamine (2C-T-2) in rat urine using gas chromatography/mass spectrometry (GC/MS) after enzymatic cleavage of conjugates, liquid-liquid extraction and derivatization. The structures of 14 metabolites were assigned tentatively by detailed interpretation of their mass spectra. Identification of these metabolites indicated that 2C-T-2 was metabolized by sulfoxidation followed by N-acetylation and either hydroxylation of the S-ethyl side chain or demethylation of one methoxy group, O-demethylation of the parent compound followed by N-acetylation and sulfoxidation, deamination followed by reduction to the corresponding alcohol followed by partial glucuronidation and/or sulfation or by oxidation to the corresponding acid followed either by partial glucuronidation or by degradation to the corresponding benzoic acid derivative followed by partial glucuronidation. Furthermore, 2C-T-2 was metabolized by N-acetylation of the parent compound followed either by O-demethylation and sulfoxidation or by S-dealkylation, S-methylation and sulfoxidation. The authors' systematic toxicological analysis (STA) procedure using full-scan GC/MS after acid hydrolysis, liquid-liquid extraction microwave-assisted acetylation allowed the detection of an intake of a dose of 2C-T-2 in rat urine, which corresponds to a common drug users' dose. Assuming similar metabolism, the described STA procedure should be suitable for proof of an intake of 2C-T-2 in human urine.     

Substoichiometric determination of phosphorus

Phosphorus in orchard leaves (NBS SRM-1571) and spinach (SRM-1570) was determined by various substoichiometric analytical methods such as the direct method, GRASHCHENKO's method and the method of carrier amount variation. All samples were labelled with³²P radioisotope. The data obtained by the method of carrier amount variation were also treated by the method of least squares instead of De VOE's method. Phosphorus concentration in orchard leaves was 0.206±0.011% by the direct method, 0.219±0.011% by GRASHCHENKO's method, 0.211±0.011% by the method of carrier amount variation and 0.207±0.007% by the method of least squares, respectively. These values agree with the value reported by NBS (0.21±0.01%). Furthermore, these concentrations obtained by various substoichiometric methods were compared with those by radioactivation reported in a prevoius paper.     

Chemical composition and antibacterial activity of Origanum saccatum P.H. Davis essential oil obtained by solvent-free microwave extraction: comparison with hydrodistillation

The components of the essential oils (EOs) obtained by solvent-free microwave extraction (SFME) and hydrodistillation (HD) from endemic Origanum saccatum P.H. Davis were identified by using GC/MS. The main constituents of both EOs obtained by SFME and HD, respectively, from O. saccatum were p-cymene (72.5 and 70.6%), thymol (9.32 and 8.11%), and carvacrol (7.18 and 6.36%). The EO obtained by SFME contained substantially higher amounts of oxygenated compounds and lower amounts of monoterpenes than did the EO obtained by HD. The antibacterial activities of the EOs obtained by SFME and HD were evaluated with the disc diffusion method by comparison with 10 different bacterial strains. The antibacterial activity of the EO extracted by SFME was found to be more effective than that of the EO extracted by HD against seven of the tested bacteria.     

Theoretical study of the influence of small angle scattering on diffraction enhanced imaging

Small angle scattering plays an important role in diffraction enhanced imaging (DEI). The DEI equation proposed by Chapman is accepted and widely used by many applications in medical, biological and material researches. However, in this framework the contribution of the small angle scattering determined by the crystal analyzer is neglected and the extinction contrast caused by the rejection of the small angle scattering by the analyzer is not explicitly expressed. In this contribution we introduce two additional terms in the DEI equation that describe the additional background introduced by the small angle scattering collected by the analyzer crystal and the extinction contrast associated to the rejection of the small angle scattering by the analyzer crystal, respectively. Four kinds of images of the DEI method were considered by using these revised equations and results were presented and discussed.     

Growth, structural, optical, thermal and mechanical properties of ammonium pentaborate single crystal

Nonlinear optical single crystals of ammonium pentaborate (APB) were grown by the slow cooling method from aqueous solution. Grown crystal was characterized by powder X-ray diffraction (PXRD) and FT-IR spectral analysis. Perfection of the grown crystal was evaluated by high-resolution X-ray diffractometry (HRXRD). The effect of nylon threading on the perfection of the grown bigger crystal was also studied by HRXRD. The range and percentage of optical transmission was ascertained by recording UV-vis-NIR spectrum. Thermal properties were investigated by TG-DTA and DSC analyses. Its mechanical hardness was estimated by Vickers microhardness tester.