Nanocomposites of nanocrystalline cellulose for enzyme immobilization

We describe the synthesis, characterization and use of a composite material made of a renewable source and metallic nanoparticles for biosensing applications. Nanocrystalline cellulose (NCC) is a product isolated from natural cellulose fibers, which is of approximately 100 nm long and 10 nm wide in size. We augmented the surface area and tailored the chemical affinity of NCC by optimally dressing it with gold nanoparticles (AuNPs). The deposition of AuNPs on NCC was controlled by using cationic polyethylenimine (PEI) at different pHs. AuNPs were thiol-functionalized using different linkers prior to enzyme immobilization. The enzyme (glucose oxidase or GOx) was conjugated on the composite by carbodiimide coupling, and subsequent activation of linker-carboxylic acid group. Our results showed that GOx was attached to the surface of the NCC nanocomposite. Moreover, the amount of GOx loaded onto the support depended on the length of the thiol-linker used. The lower value (20.3 mg/mg of support) was obtained with the longer thiol-linker (11 carbon chain) compared to 25.2 mg/mg of support for the smaller thiol-linker (3 carbon chain).     

Amperometric hydrogen peroxide biosensor based on the immobilization of heme proteins on gold nanoparticles-bacteria cellulose nanofibers nanocomposite

A novel matrix, gold nanoparticles-bacterial cellulose nanofibers (Au-BC) nanocomposite was developed for enzyme immobilization and biosensor fabrication due to its unique properties such as satisfying biocompatibility, good conductivity and extensive surface area, which were inherited from both gold nanoparticles (AuNPs) and bacterial cellulose nanofibers (BC). Heme proteins such as horseradish peroxidase (HRP), hemoglobin (Hb) and myoglobin (Mb) were successfully immobilized on the surface of Au-BC nanocomposite modified glassy carbon electrode (GCE). The immobilized heme proteins showed electrocatalytic activities to the reduction of H₂O₂ in the presence of the mediator hydroquinone (HQ), which might be due to the fact that heme proteins retained the near-native secondary structures in the Au-BC nanocomposite which was proved by UV-vis and IR spectra. The response of the developed biosensor to H₂O₂ was related to the amount of AuNPs in Au-BC nanocomposite, indicating that the AuNPs in BC network played an important role in the biosensor performance. Under the optimum conditions, the biosensor based on HRP exhibited a fast amperometric response (within 1 s) to H₂O₂, a good linear response over a wide range of concentration from 0.3 μM to 1.00 mM, and a low detection limit of 0.1 μM based on S/N = 3. The high performance of the biosensor made Au-BC nanocomposite superior to other materials as immobilization matrix.     

Effect of freeze-thawing on lipid bilayer-protected gold nanoparticles

In this study, varieties of lipid bilayer-protected gold nanoparticles (AuNPs) were synthesized through a simple wet chemical method, and then the effect of freeze-thawing on the as-prepared AuNPs was investigated. The freeze-thawing process induced fusion or fission of lipid bilayers tethered on the AuNPs. The UV-vis spectra and transmission electron microscopy experiments revealed that the disruption of lipid bilayer structures on the nanoparticles led to the fusion or aggregation of AuNPs. The role of freeze-thawing in the evolution of lipid bilayer-protected AuNPs was studied. The addition of adequate sucrose, a well-known cryoprotectant, effectively prevented the fusion or aggregation of lipid bilayer-protected AuNPs undergoing the freeze-thawing process. The possible mechanism of sucrose preserving the integrity of the lipid bilayer-protected AuNPs was also discussed.     

溶胶-凝胶法原位复合PVA/HA水凝胶的结构表征与性能研究

采用溶胶-凝胶原位复合的方法制备了聚乙烯醇/羟基磷灰石生物活性复合水凝胶,探讨了HA含量对复合水凝胶结构性能的影响,用X射线衍射分析、红外光谱分析、DSC、扫描电镜等方法对HA在PVA水凝胶体系中的晶态结构及分散状态进行了表征,并与物理共混复合法进行了比较.研究发现,采用溶胶-凝胶法原位复合可在PVA水凝胶中形成具有生物活性的HA结晶结构,且分散良好,分布均匀.HA粉体作为异相成核剂,促进了PVA水凝胶基体的结晶,提高了复合水凝胶的力学性能.     

Self-assembly and encoding of polymer-stabilized gold nanoparticles with surface-enhanced Raman reporter molecules

Polymer-stabilized gold nanoparticles (AuNPs) were prepared and encoded with a range of surface-enhanced Raman reporter molecules. A range of as-synthesized polymers produced by reversible addition fragmentation chain transfer (RAFT) polymerization were demonstrated to self-assemble at the surface of AuNPs dispersed in water. The method involved the coprecipitation of polymer-gold conjugates by the addition of polymer dissolved in a water-miscible solvent to gold AuNPs dispersed in water. This method represents a simplification of the preparation of polymer-stabilized AuNPs compared with other published methods, in that the AuNPs do not need to be first transferred to an organic solvent. The process enabled the polymer stabilized AuNPs to be easily recovered by filtration or by phase transfer of the AuNPs to an organic solvent in which the RAFT polymer was soluble. The polymer-stabilized AuNPs were characterized by a range of methods including UV-visible spectrophotometry, transmission electron microscopy, thermogravimetric analysis, dynamic light scattering, and attenuated total reflection Fourier transform infrared spectroscopy. Furthermore, 1H pulsed field gradient spin echo NMR was utilized to characterize the self-diffusion of the polymer-stabilized AuNPs. Finally, we then demonstrated that these polymer-stabilized AuNPs maintained their ability to be encoded with surface-enhanced Raman spectroscopy reporter molecules.     

基于DNA电化学发光传感器研究金纳米颗粒对量子点的电化学发光影响

纳米金颗粒具有高的消光系数和良好的表面等离子体共振特性, 其等离子体共振特性受纳米金颗粒的尺寸和周围环境等因素的影响. 本文基于半导体纳米晶电化学发光信号对金纳米颗粒的距离依赖性制备了DNA电化学发光传感器. 首先利用循环伏安法(CV)在玻碳电极(GCE)表面原位沉积金纳米颗粒(AuNPs), 巯基丙酸包裹的CdS量子点(QDs)与氨基修饰的双链DNA (dsDNA)通过酰胺键缩合, 形成量子点修饰的双链DNA(QDs-dsDNA). 最后将QDs-dsDNA 通过dsDNA 另一端的巯基组装到纳米金表面, 得到CdS QDs-DNA/AuNPs/GCE电化学发光传感器. 在优化电极表面QDs-dsDNA密度、金纳米颗粒沉积方法等实验条件的基础上, 对不同传感器的表面性质进行了表征, 如形貌和电化学阻抗等. 进一步通过控制纳米金和CdS QDs之间的DNA研究了纳米金对CdS QDs发光信号的影响作用. 结果显示DNA链的长度和类型对发光信号有着重要的影响. 最后将此传感器用于环境污染物的DNA损伤检测, 显示出很好的灵敏响应.     

用金纳米粒子修饰硅纳米线及复合结构的光谱性质研究

在溶液中以正己硫醇作稳定剂, 利用HAuCl4与HF处理后的硅纳米线(SiNWs)的氧化还原反应, 在SiNWs表面负载金纳米粒子(AuNPs). 通过调整HAuCl4的浓度, 得到了AuNPs粒径从3.2到7.0 nm的AuNPs/SiNWs复合结构, 并对这种复合结构进行了紫外-可见吸收光谱和荧光光谱研究. 紫外-可见吸收光谱研究表明, 负载不同粒径的AuNPs的SiNWs在530～580 nm间有明显的由AuNPs表面等离子体共振引起的吸收, 且随着AuNPs粒径的增加, 该吸收峰发生红移. 负载前后的荧光光谱表明, 在红光和绿光区负载AuNPs的SiNWs的荧光峰与HF处理后SiNWs的荧光峰峰形相当, 峰位变化不大; 但在蓝光区, 不同于HF处理前后SiNWs的发射峰(464 nm左右), 负载了AuNPs的SiNWs在423 nm的位置处出现了强荧光峰, 这个峰是AuNPs费米能级的电子与sp或d带的空穴辐射复合产生的.     

金纳米粒子膜的电化学合成及SERS活性分析

Surface-enhanced Raman scattering(SERS)-active gold nanoparticles(AuNPs) films were prepared with a one-step electrochemical method. The orthogonal design was used to investigate the experimental conditions influencing the morphologies and the SERS activity of the AuNPs. A condition was found to obtain the optimal SERS activity. The SEM study reveals that the AuNPs films were composed of closely packed AuNPs. The Finite Difference Time Domain(FDTD) simulation result indicates that the coupling between particles plays an important role in the enhancement SERS of AuNPs.     

Highly Sensitive Impedimetric Biosensor Based on Thermolysin Immobilized on a GCE Modified with AuNP-decorated Graphene for the Detection of Ochratoxin A

The fabrication of a thermolysin-based biosensor capable of detecting ochratoxin A (OTA) from food samples is described. The electrochemical deposition of calcium cross-linked cellulose film (CCLC) and gold nanoparticles (AuNPs) on graphene (GR) for modification of a glassy carbon electrode (GCE) is the first step. Then the thermolysin (TLN) enzyme in a polyvinyl alcohol (PVA)/polyethylenimine (PEI) matrix is immobilized. The impedimetric biosensor response is linear from 0.2 nM to 100 nM with a detection limit of 0.2 nM. The obtained stable and reproducible biosensor is then applied for the detection of OTA in spiked extracts from coffee beans.     

Vibrational spectroscopic characterization of 4-acylamidobenzenethiol-stabilized gold nanoparticles

A simple preparation method of gold nanoparticles (AuNPs) with 4-acylamidobenzenethiol derivative (BD) was improved to obtain the larger size of AuNPs which exhibited localized surface plasmon resonance. The spectroscopic characterizations of two kinds of BD-stabilized AuNPs were carried out by means of ATR-FTIR and Raman spectroscopy in order to clarify the conformation and orientation of BDs adsorbed on AuNPs. The relation between the stability of AuNPs and the adsorbed states of BDs were also discussed. The average sizes of the resulting AuNPs were 18 nm for BD1 and 30 nm for BD2, respectively. It was found that the BD1-capped AuNPs formed large aggregates. The results of vibrational spectroscopy revealed that loosely packed self-assembled monolayer (SAM) of BD1 molecules was formed on the surface of the AuNPs; on the other hand, densely packed SAM was formed in the case of BD2. We concluded the difference behavior between the two types of molecules was caused by the functional groups. The sulfuryl groups of BD2 induced highly ordered SAM and suppressed aggregate formation of AuNPs.     

Self-assembly of ionic liquid (BMI-PF6)-stabilized gold nanoparticles on a silicon surface: chemical and structural aspects

Ultrafine monodisperse gold nanoparticles (AuNPs) were synthesized by an elegant sputtering of gold onto 1- n-butyl-3-methylimidazolium hexafluorophosphate (BMI-PF(6)) ionic liquid. It was found that the BMI-PF(6) supramolecular aggregates were loosely coordinated to the gold nanoparticles and were replaceable with thiol molecules. The self-assembly of BMI-PF(6)-stabilized AuNPs onto a (3-mercaptopropyl)trimethoxysilane (MPS)-functionalized silicon surface in 2D arrays, followed by dodecanethiol (DDT) treatment, have been demonstrated using X-ray photoelectron spectroscopy, field emission scanning electron microscopy, and contact angle measurements. DDT treatment of tethered AuNPs revealed two types of interactions between AuNPs and the MPS-functionalized surface: (a) AuNPs anchor through Au-S chemisorption linkage resulting in strong immobilization and (b) some of the AuNPs are supported by physisorption, driven by BMI-PF(6). The attachment of these particles remains unchanged with sonication. The replacement of BMI-PF(6) aggregates from physisorbed AuNPs with DDT molecules advances the dilution of their interaction with the MPS-functionalized surface, and they subsequently detach from the silicon surface. The present finding is promising for the immobilization of ionic liquid-stabilized nanoparticles, which is very desirable for electronic and catalytic device fabrication. Additionally, these environmentally friendly AuNPs are expected to replace conventional citrate-stabilized AuNPs.     

Amphiphilic Janus Gold Nanoparticles Prepared by Interface‐Directed Self‐Assembly: Synthesis and Self‐Assembly

Materials with Janus structures are attractive for wide applications in materials science. Although extensive efforts in the synthesis of Janus particles have been reported, the synthesis of sub‐10 nm Janus nanoparticles is still challenging. Herein, the synthesis of Janus gold nanoparticles (AuNPs) based on interface‐directed self‐assembly is reported. Polystyrene (PS) colloidal particles with AuNPs on the surface were prepared by interface‐directed self‐assembly, and the colloidal particles were used as templates for the synthesis of Janus AuNPs. To prepare colloidal particles, thiol‐terminated polystyrene (PS‐SH) was dissolved in toluene and citrate‐stabilized AuNPs were dispersed in aqueous solution. Upon mixing the two solutions, PS‐SH chains were grafted to the surface of AuNPs and amphiphilic AuNPs were formed at the liquid–liquid interface. PS colloidal particles decorated with AuNPs on the surfaces were prepared by adding the emulsion to excess methanol. On the surface, AuNPs were partially embedded in the colloidal particles. The outer regions of the AuNPs were exposed to the solution and were functionalized through the grafting of atom‐transfer radical polymerization (ATRP) initiator. Poly[2‐(dimethamino)ethyl methacrylate] (PDMAEMA) on AuNPs were prepared by surface‐initiated ATRP. After centrifugation and dissolving the colloidal particles in tetrahydrofuran (THF), Janus AuNPs with PS and PDMAEMA on two hemispheres were obtained. In acidic pH, Janus AuNPs are amphiphilic and are able to emulsify oil droplets in water; in basic pH, the Janus AuNPs are hydrophobic. In mixtures of THF/methanol at a volume ratio of 1:5, the Janus AuNPs self‐assemble into bilayer structures with collapsed PS in the interiors and solvated PDMAEMA at the exteriors of the structures.     

Rapid synthesis of bovine serum albumin-conjugated gold nanoparticles using pulsed laser ablation and their anticancer activity on hela cells

Nanoscience research aims to produce nanoparticles without adverse effects for medical applications. The pulsed laser ablation (PLA) technique was utilized in this study to synthesize gold nanoparticles (AuNPs) using bovine serum albumin (BSA) in simulated body fluid (SBF) at the fundamental wavelength of the Nd: YAG laser (1064 nm). BSA acted as a stabilizer, reducing and capping agent to produce spherically shaped AuNPs (diameter 3–10 nm). The successful synthesis of AuNPs was confirmed through color changes and UV–vis spectroscopy. The agglomeration and precipitation of AuNPs are attributed to the presence of BSA in the solution, and electrostatic repulsion interactions between BSA and Au nanoclusters. The effect of salt concentration of SBF on BSA stability as well as the interaction of BSA conjugated AuNPs to form complexes was studied using molecular dynamic simulations. Our results show that the stability of AuNPs-BSA conjugates increase with the salt concentration of BSA. Moreover, the synthesized AuNPs exhibit low toxicity and high biocompatibility, supporting their application in drug delivery. Investigation of the cytotoxic effect of the synthesized AuNPs show that normal fibroblast cells (L929) remain intact after treatment whereas a dose-dependent inhibition effect on the growth of cervix cancer cells (HeLa) is observed. In general, this study presents an effective, environmentally-friendly, and facile approach to the synthesis of multifunctional AuNPs using the PLA technique, as a promising efficacious therapeutic treatment of cervical cancer.     

Formulation of gold nanoparticles with hibiscus and curcumin extracts induced anti-cancer activity

Gold nanoparticles (AuNPs) have shown a potential for biological applications due to their biocompatibility and high efficiency in drug delivery. Most of the times, the chemical routs are being used to synthesize the AuNPs products. In this paper, eco-friendly non-chemical rout was used to prepare AuNPs by utilizing hibiscus and curcumin extracts as reducing and stabilizing agents, and subsequently their anticancer activities were investigated. The synthesized AuNPs were characterized by using ultraviolet–visible spectroscopy (UV–Vis spectroscopy), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). UV–Vis spectroscopy analysis confirmed the characteristics absorption peak of gold, and FTIR findings were highlighted the characteristics boding. SEM and TEM analyses showed that the particles were predominantly spherical in shape. The particles were well dispersed when they were prepared under Hibiscus extracts with average size ～ 13 nm. An interesting morphology was observed when AuNPs were prepared with curcumin, where particles displayed an interconnected morphology (average size ～ 18 nm). The anticancer cell activity of AuNPs was studied against human colorectal carcinoma cells (HCT-116) and breast cancer cells (Michigan Cancer Foundation-7 (MCF-7)). The results of anticancer study showed that the treatment of cancer cells with AuNPs decreased the number of cells significantly as compared to control cells. The AuNPs -Hibiscus specimen showed a better inhibiting property than AuNPs -Curcumin, which is attributed to their uniform dispersion and small size.     

Gold-nanosphere formation using food sample endogenous polyphenols for in-vitro assessment of antioxidant capacity

In this work it was demonstrated that sample endogenous polyphenols are selectively driving the gold-nanoparticle (AuNPs)-formation process when representative food samples were used as natural sources of reducing compounds. The process of AuNPs formation was characterized by UV-visible spectroscopy and was described by a sigmoidal curve (R (2)?≥?0.990) which gave information about the polyphenol concentration at which the localized surface plasmon resonance (LSPR) absorption reached its half-value, X (c) (50) , and about AuNPs production per polyphenol concentration unit, K (AuNPs). The behavior of phenolic acids was different, with lower X (c) (50) and higher K (AuNPs) values than flavonoids. For the food samples tea, apple, pear, wine, and honey X (c) (50) values were 0.22, 7.3, 11.5, 20.4, 30.3, and 53.5 (mg mL(-1)) and K (AuNPs) values were 28.7, 0.70, 0.60, 0.20, 0.14, and 0.10 (mg(-1) mL), respectively. Excellent correlation between K (AuNPs) and total phenolics (TP) was obtained (r?=?0.98, p-value? apple > pear > wine > honey. The reproducibility of the AuNPs formation approach was excellent, not only for polyphenol standards (RSD?相似文献   

Electrochemical Aptasensor Based on Au Nanoparticles Decorated Porous Carbon Derived from Metal-Organic Frameworks for Ultrasensitive Detection of Chloramphenicol

A facile and sensitive electrochemical aptamer sensor (aptasensor) based on Au nanoparticles-decorated porous carbon (AuNPs/PC) composite was developed for the efficient determination of the antibiotic drug chloramphenicol (CAP). AuNPs modified metal-organic framework (AuNPs/ZIF-8) is applied as a precursor to synthesize the porous carbon with homogeneous AuNPs distribution through a direct carbonization step under nitrogen atmosphere. The as-synthesized AuNPs/PC exhibits high surface area and improved conductivity. Moreover, the loading AuNPs could enhance the attachment of the aptamers on the surface of electrode through the Au–S bond. When added to CAP, poorly conductive aptamer-CAP complexes are formed on the sensor surface, which increases the hindrance to electron transfer resulting in a decrease in electrochemical signal. Based on this mechanism, the developed CAP aptasensor represents a wide linear detection range of 0.1 pM to 100 nM with a low detection limit of 0.03 pM (S/N = 3). In addition, the proposed aptasensor was employed for the analysis of CAP in honey samples and provided satisfactory recovery.     

Hetero-assembly of gold nanoparticles on a DNA origami template

Hetero-assembling of spherical building blocks with well-defined spatial distribution holds great significance in developing chiral nanostructures. Herein, a strategy for hetero-assembling of gold nanoparticles(Au NPs) was demonstrated using rigid bifacial DNA origami as templates. By tuning the sizes and the fixed location of Au NPs on DNA origami, right-handed and left-handed Au NPs nanostructures were respectively constructed. Gel electrophoresis indicated the formation of the DNA origami-Au NPs complex and transmission electron microscopy(TEM) visually displayed the arrangement of Au NPs in these two chiral structures. The spatial configuration and 3D geometry of Au NPs were further illustrated by the stereographic TEM with tilting angles from ?30° to 30°. This strategy provides a universal approach to construct the asymmetrical 3D geometries, which may have potential applications in biomimicking and nanophotonics.     

Gold nanoparticle-based homogeneous fluorescent aptasensor for multiplex detection

We developed a homogeneous fluorescence assay for multiplex detection based on the target induced conformational change of DNA aptamers. DNA aptamers were immobilized on quantum dots (QDs), and QDs conjugated ssDNA was adsorbed on the surface of gold nanoparticles (AuNPs) by electrostatic interaction between uncoiled ssDNA and the AuNPs. Subsequently the fluorescence of QDs was effectively quenched by the AuNPs due to fluorescence resonance energy transfer (FRET) of QDs to AuNPs. In the presence of targets, the QDs conjugated aptamers were detached from AuNPs by target induced conformational change of aptamers, consequently the fluorescence of the QDs was recovered proportional to the target concentration. In this study, three different QD/aptamer conjugates were used for multiplex detection of mercury ions, adenosine and potassium ions. In a control experiment, all of the three targets were simultaneously detected with high selectivity.     

Electrooxidation of ethylene glycol using gold nanoparticles electrodeposited on pencil graphite in alkaline medium

The electrooxidation of ethylene glycol(EG) on the surface of gold nanoparticles(AuNPs) in alkaline medium was investigated.AuNPs were electrodeposited on pencil graphite(PG) by fast scan cyclic voltammetry.Different sizes of AuNPs deposited on the surface of PG(AuNPs/PG) were used for the electrooxidation process.AuNPs were electrodeposited on PG at various deposition times in the same potential range but with different scan rates and scan cycles.Scanning electron microscopy(SEM),transmission electron microscopy(TEM) and X-ray diffraction(XRD) were used to visualize and characterize the prepared AuNPs/PG electrodes.Cyclic voltammograms were also used to investigate the electrooxidation of EG.The effects of EG and supporting electrolyte concentrations,scan rate,particle size of AuNPs and final potential limit on the electrooxidation process have been investigated.Further studies showed that the electrooxidation of EG is affected by temperature of the medium.The prepared AuNPs showed stability after long-term use.     

Green synthesis of Au nanoparticles immobilized on halloysite nanotubes for surface-enhanced Raman scattering substrates

A facile and green route was introduced to synthesize Au nanoparticles immobilized on halloysite nanotubes (AuNPs/HNTs) used for surface-enhanced Raman scattering substrates. The naturally occurring HNTs were firstly functionalized with a large amount of -NH(2) groups by N-(β-aminoethyl)-γ-aminopropyl trimethoxysilane (AEAPTES), which possesses one lone electron pair and will "anchor" Au ions to form a chelate complex. Then, with the addition of tea polyphenols (TP), the Au ions were reduced on the surface of the previously formed Au-NH(2) chelate complex to form AuNPs. Transmission electron microscopy (TEM) and field emission scanning electron microscopy (FE-SEM) observations indicate that a large amount of AuNPs were synthesized on HNTs. The AuNPs are irregularly spherical and densely dispersed on HNTs and the diameter of the nanoparticles varies from 20 to 40 nm. The interactions between AuNPs and -NH(2) groups were verified by X-ray photoelectron spectroscopy (XPS) and the results showed that the functional groups can "anchor" AuNPs through the chelating effect. The as-prepared AuNPs/HNTs nanomaterials with several nanometers gaps among nanoparticles were used as a unique surface-enhanced Raman scattering substrate, which possessed strong and distinctive Raman signals for R6G, indicating the remarkable enhancement effect of the AuNPs/HNTs.