The structural, electronic and optical properties of CdxZn1 − xSe ternary alloys

The structural, electronic, and optical properties of Cd_xZn_1 − xSe alloys are investigated using the first-principles plane-wave pseudopotential method within the LDA approximations. In particular, the lattice constant, bulk modulus, electronic band structures, density of state, and optical properties such as dielectric functions, refractive index, extinction coefficient and energy loss function are calculated and discussed. Our results agree well with the available data in the literature.     

Structural, magnetic and electronic transport properties of MnxGe1−x/Ge(0 0 1) films grown by MBE at 350 °C

We report on the structural, magnetic and electronic transport properties of thin Mn_xGe_1−x films grown at 350 °C. Isolated Mn₅Ge₃ nanoclusters, about 100 nm in size, were formed at the top surface of the film, dominating the magnetic properties of the whole film. Electronic transport properties show Mn doping effect indicating the presence of substitutional Mn ions dispersed in the Ge host, contributing to the formation of a Mn_xGe_1−x diluted phase. Electrical behaviour indicates a saturation effect with the raise of the nominal Mn concentration in the film, above x ≅ 0.03.     

Structural,electronic and optical properties of CdxZn1 − xS alloys from first-principles calculations

Structural, electronic and optical properties as well as structural phase transitions of ternary alloy Cd_xZn_1 − xS have been investigated using the first-principles calculations based on the density functional theory. We found that the crystal structure of Cd_xZn_1 − xS alloys transforms from wurtzite to zinc blende as Cd content of x=0.83$x=0.83$. Effect of Cd content on electronic structures of Cd_xZn_1 − xS alloys has been studied. The bandgaps of Cd_xZn_1 − xS alloys with wurtzite and zinc blende structures decrease with the increase of Cd content. Furthermore, dielectric constant and absorption coefficient also have been discussed in detail.     

Effect of Cr on the magnetic properties of evaporated CoxCr1−x/Si(1 0 0) and CoxCr1−x/glass thin films

Series of Co_xCr_1−x thin films have been evaporated under vacuum onto Si(1 0 0) and glass substrates. Thickness ranges from 17 to 220 nm, and x from 0.80 to 0.88. Alternating gradient field magnetometer (AGFM) measurements provided saturation magnetization values ranging from 220 to 1200 emu/cm³. Values of squareness exceeding 0.8 have been measured. Coercive field may reach values up to 700 Oe, depending on the percentage of chromium, as well as the substrate nature and the direction of the applied magnetic field. The saturation magnetization value decreases as the Cr content increases. In order to study their dynamical magnetic properties, Brillouin Light Scattering (BLS) measurements have been performed on these samples. Stiffness constant value and anisotropy magnetic field were adjusted to fit the experimental BLS spectra. These results are analyzed and correlated.     

High-temperature electrical properties of magnesiowustite Mg1 − xFexO and spinel Fe3 − x − yMgxCryO4 ceramics

Phase relationships, thermal expansion and electrical properties of Mg_1 − xFe_xO (x = 0.1-0.45) cubic solid solutions and Fe_{3 − x − y}Mg_xCr_yO_4 ± δ (x = 0.7-0.95; y = 0 or 0.5) spinels were studied at 300-1770 K in the oxygen partial pressure range from 10 Pa to 21 kPa. Increasing iron content enlarges the spinel phase stability domain at reduced oxygen pressures and elevated temperatures. The total conductivity of the spinel ceramics is predominantly n-type electronic and is essentially p(O₂)-independent within the stability domain. The computer simulations using molecular dynamics technique confirmed that overall level of ion diffusion remains low even at high temperatures close to the melting point. Temperature dependencies of the total conductivity in air exhibit a complex behavior associated with changing the dominant defect-chemistry mechanism from prevailing formation of the interstitial cations above 1370-1470 K to the generation of cation vacancies at lower temperatures, and with kinetically frozen cation redistribution in spinel lattice below 700-800 K. The average thermal expansion coefficients of the spinel ceramics calculated from dilatometric data in air vary in the range (9.6-10.0) × 10^− 6 K^− 1 at 300-500 K and (13.2-16.1) × 10^− 6 K^− 1 at 1050-1370 K. Mg_1 − xFe_xO solid solutions undergo partial decomposition on heating under oxidizing and mildly reducing conditions, resulting in the segregation of spinel phase and conductivity decrease.     

Structural studies of evaporated CoxCr1−x/Si (1 0 0) and CoxCr1−x/glass thin films

Series of Co_xCr_1−x thin films have been evaporated under vacuum onto Si (1 0 0) and glass substrates. Chemical composition and interface properties have been studied by modelling Rutherford backscattering spectra (RBS) using SIMNRA programme. Thickness ranges from 17 to 220 nm, and x from 0.80 to 0.88. Simulation of the energy spectra shows an interdiffusion profile in the thickest films, but no diffusion is seen in thinner ones. Microscopic characterizations of the films are done with X-ray diffraction (XRD) measurements. All the samples are polycrystalline, with an hcp structure and show a 〈0 0 0 1〉 preferred orientation. Atomic force microscopies (AFM) reveal very smooth film surfaces.     

Surface defect states of CdTexS1 − x quantum dots

Properties of surface defect states of CdTe_xS_1 − x quantum dots with an average diameter of 7 nm are investigated experimentally. The stoichiometric ratio is found to be for by use of the energy dispersive analysis of x-ray. The photoluminescence spectrum, the photoluminescence excitation spectrum, and the surface passivation are adopted to characterize the properties of surface defect states. The energy levels of surface defect states of CdTe_xS_1 − x quantum dots are also determined.     

First-principles calculations of the structural, electronic and optical properties of cubic BxGa1−xAs alloys

Density functional calculations are performed to study the structural, electronic and optical properties of technologically important B_xGa_1−xAs ternary alloys. The calculations are based on the total-energy calculations within the full-potential augmented plane-wave (FP-LAPW) method. For exchange-correlation potential, local density approximation (LDA) and the generalized gradient approximation (GGA) have been used. The structural properties, including lattice constants, bulk modulus and their pressure derivatives, are in very good agreement with the available experimental and theoretical data. The electronic band structure, density of states for the binary compounds and their ternary alloys are given. The dielectric function and the refractive index are also calculated using different models. The obtained results compare very well with previous calculations and experimental measurements.     

AlN, GaN, AlxGa1 − xN nanotubes and GaN/AlxGa1 − xN nanotube heterojunctions

Semiconductor optoelectronic devices based on GaN and on InGaN or AlGaN alloys and superlattices can operate in a wide range of wavelengths, from far infrared to near ultraviolet region. The efficiency of these devices could be enhanced by shrinking the size and increasing the density of the semiconductor components. Nanostructured materials are natural candidates to fulfill these requirements. Here we use the density functional theory to study the electronic and structural properties of (10,0) GaN, AlN, Al_xGa_1 − xN nanotubes and GaN/Al_xGa_1 − xN heterojunctions, 0<x<1. The Al_xGa_1 − xN nanotubes exhibit direct band gaps for the whole range of Al compositions, with band gaps varying from 3.45 to 4.85 eV, and a negative band gap bowing coefficient of −0.14 eV. The GaN/Al_xGa_1 − xN nanotube heterojunctions show a type-I band alignment, with the valence band offsets showing a non-linear dependence with the Al content in the nanotube alloy. The results show the possibility of engineering the band gaps and band offsets of these III-nitrides nanotubes by alloying on the cation sites.     

Desorption of surfactant and sintering of surface-modified PdxNi1 − x nanoparticles

A series of Pd_xNi_1 − x nanoparticles in a diameter of 6-7 nm were prepared by wet chemical reduction. They were then modified with two surfactants, stearic acid (SA) and polyethylene glycol (PEG). Desorption of the surfactant was studied using a temperature programmed desorption technique, and the sintering behavior of surface-modified Pd_xNi_1 − x nanoparticles was examined. Since surface energy of the nanoparticles depends on the alloy composition, it can be correlated with the desorption temperature of surfactant from the nanoparticle surface. Because Ni has a higher surface energy, the surfactant desorption temperature increases as the Ni content increases. With the same stoichiometry, the desorption temperature of SA is always higher than that of PEG. The SA-modified nanoparticles have higher thermal stability and are less sintered than PEG-modified nanoparticles. The sintering and growth behavior of the nanoparticles can be correlated with variation of surface energy due to different surface modification.     

Magnetic and electronic structure in new iron-based layered SrFe1 − xCoxAsF systems

By using the first-principles calculation, we study the structural, magnetic, and electronic properties of the SrFeAsF compound and its Co-doped counterpart SrFe_1 − xCo_xAsF (x=0.125). It is shown that the competition of the nearest and next-nearest neighbor exchange coupling J₁ and J₂ between Fe ions gives rise to a frustrated striped antiferromagnetic order in SrFeAsF and an accompanied lattice distortion, while for the Co-doped case, both J₁ and J₂ decrease significantly as well as the lattice distortion, and thus the antiferromagnetic order is suppressed greatly. This is further confirmed by the electronic structure calculation that the density of states at the Fermi level increases with Co doping as well as the itinerancy of Fe d electron.     

Effect of Cr substitution on the multiferroic properties of BiFe1 − xCrxO3 compounds

Single-phase BiFe_1 − xCr_xO₃ (x=0, 0.05 and 0.1) compounds are synthesized by a sol-gel process. The lattice parameters decrease and the magnetizations increase with the Cr content. Moreover, the magnetoelectric coupling between magnetic order and ferroelectric order at room temperature was enhanced.     

Magnetic characterization of Bi(Fe1 − xMnx)O3

Bi(Fe_1 − xMn_x)O₃ ceramics (x up to 0.3) were prepared by rapid sintering. Weak ferromagnetism with two magnetic anomalies at low temperatures was observed for Bi(Fe_0.95Mn_0.05)O₃ and Bi(Fe_0.9Mn_0.1)O₃. From temperature-dependent magnetic relaxation measurements, the anomalies at 20 K and 100 K are related to the freezing of cluster spin glass.     

Phase and electrical behaviour in the Bi14W1 − xLaxO24 − 3x/2 system

The compositional and thermal dependencies of phase and electrical behaviour of compositions in the system Bi₁₄W_1 − xLa_xO_{24 − 3x/2} (0.00 < x < 1.00) have been studied by X-ray powder diffraction, differential thermal analysis and a.c. impedance spectroscopy. The system exhibits polymorphism and phase separation, which shows both compositional and thermal dependence. Compositions with x = 0.25 and x = 0.50 exhibit a single phase tetragonal structure at room temperature. In contrast, the x = 0.75 composition at room temperature shows a mixture of a cubic phase and a secondary β-Bi₂O₃ related tetragonal phase. A full solid solution is observed at high temperatures, corresponding to the occurrence of a δ-Bi₂O₃ type phase. The appearance of the various phases correlates well with the observed electrical behaviour. The x = 0.75 composition exhibits exceptionally high conductivity at high temperatures (σ₈₀₀ = 1.34 S cm^− 1), but also shows significant phase separation at lower temperatures.     

Growth of BaxSr1−xSO4 nano-steps on barite (0 0 1) face

Crystal growth has been promoted in the fluid cell of an Atomic Force Microscope (AFM) by passing Ba-Sr-SO₄ aqueous solutions over barite (0 0 1) cleavage surfaces. Steps advance in structural continuity with the original barite (0 0 1) surfaces and two-dimensional nucleation occurs preferentially on the newly-formed terraces. The terraces are, on average, 7.5% lower than pure barite terraces. Since the ionic radius of Sr²⁺ is smaller that the ionic radius of Ba²⁺, the reduction of terrace height is consistent with an extensive incorporation of Sr²⁺ into the barite structure. Therefore, it can be considered that the newly-formed terraces have compositions corresponding to terms of the Ba_xSr_1−xSO₄ solid solution. A non-linear dependence of step rate on [SrSO₄] concentration in the solution (and therefore on supersaturation) has been found. The growth behaviour has been discussed by considering both the physicochemical properties of the Ba_xSr_1−xSO₄ solid solution-aqueous solution (SS-AS) system and a kinetic-based step growth model.     

Magnetism of surface alloys of the type MxN1−x/Rh(1 1 1)

We present a density functional theory study on the magnetic properties of two-dimensional surface alloys of the type M_xN_1−x (M=Fe, Co and Ni; N=Pt, Au, Ag, Cd and Pb) on Rh(1 1 1) for x=0.0, 0.25, 0.33, 0.5, 0.67, 0.75 and 1.0, in two types of geometric arrangements—striped phases or linear-chain type, and non-striped phases or mixed checkerboard type. Many pairs among these are bulk-immiscible but show mixing on the surface. We find that the trend in the magnetic moment of surface alloys of N with a given M follows the number of valence electrons in N: the higher the number of valence electrons, the lower the magnetic moment. Overlayer atoms when put on hcp sites show higher moment compared to fcc sites. In general, for a given composition x, linear-chain type structures show a reduced magnetic moment compared to checkerboard type structures. We find that Pb, when alloyed with magnetic elements (Fe, Co and Ni), has a lowering effect on their magnetic moments.     

Effect of a LaSrCoO3 buffer layer on Pb1 − xLaxTi1 − x/4O3 films studied by polarized Raman spectroscopy

A confocal Raman investigation of Pb_1 − xLa_xTi_1 − x/4O₃ (PLT) thin films grown by RF magnetron sputtering on PbO_x/Pt/Ti/SiO₂/Si substrates with an intermediate LaSrCoO₃ (LSCO) layer was performed. The influence of the LaSrCoO₃ buffer layer was analyzed taking advantage of the observed Raman spectral band variation, which varied according to different manufacturing procedures. In the presence of a LSCO layer, the A1(1TO) Raman mode, which was indicative of tetragonal distortion, was pronouncedly enhanced, and a slight deviation from the (0 0 1) plane of the film was observed from the angular dependence of the polarized Raman spectral intensity. Furthermore, the spectral band variation as well as the residual stress along the in-depth direction was measured in the film from cross-sectional spectral line scans. This latter measurement showed a relaxation of the lattice mismatch in the presence of LSCO and PbO layers.     

Size dependence of lattice parameter for SixGe1−x nanoparticles

The phenomenon of the influence of the size of a material on its properties has been predicted theoretically and was confirmed for many materials experimentally by many researchers. It is a purpose of this paper to increase understanding of the influence of size on properties for silicon, germanium and alloy silicon-germanium nanoparticles. The relationships between lattice parameter and inverse particle radius had been investigated. The data obtained from the experiments show an unpredicted result that the lattice parameter of the Si_xGe_1−x nanoparticle expands by up to 1.5% when the size of the particle decreases to 7 nm. A calibration technique for a higher precision measurement of the lattice parameter is presented. The particles under investigation were deposited on an amorphous carbon substrate in order to prevent the influence of the misfit between deposit and crystalline substrate on the particle’s behavior.     

First-principles study of structural, electronic and magnetic properties in Cd1−xFexS diluted magnetic semiconductors

In this paper, we report theoretical investigations of structural, electronic and magnetic properties of ordered dilute ferromagnetic semiconductors Cd_1−xFe_xS with x=0.25, 0.5 and 0.75 in zinc blende (B3) phase using all-electron full-potential linear muffin tin orbital (FP-LMTO) calculations within the density functional theory and the generalized gradient approximation. The analysis of band structures, density of states, total energy, exchange interactions and magnetic moments reveals that both the alloys may exhibit a half-metallic ferromagnetism character. The value of calculated magnetic moment per Fe impurity atom is found to be 4 μ_B. Moreover, we found that p-d hybridization reduces the local magnetic moment of Fe from its free space charge value of 4 μ_B and produces small local magnetic moments on Cd and S sites.