Advanced modulation formats for delivery of heterogeneous wired and wireless access networks

It is believed that the integration of wired and wireless access networks (or heterogeneous network) will provide high bandwidth and flexibility for both fixed and mobile users in a single and cost-effective platform. Here, we propose and demonstrate a signal remodulated wired and wireless network with wireless signal broadcast. Dark-return-to-zero (DRZ) and polarization-shift-keying (PolSK) signals are used for the downstream wired and wireless applications respectively. At the remote antenna unit (RAU), the PolSK signal is demodulated to produce the binary-phase-shift-keying (BPSK) signal, which will be used for the wireless broadcast application. Signal remodulation is demonstrated using reflective semiconductor optical amplifier (RSOA) as a colorless reflective modulator in the optical networking unit (ONU)/RAU. The downstream signal is remodulated at the ONU/RAU to produce the non-return-to-zero (NRZ) upstream signal.     

Dual-Output Mach–Zehnder Modulator for Optical Access Networks

This paper employs dual-output Mach–Zehnder Modulator (MZM) for optical access networks without optical filters. Light waves generated from multiple laser sources are multiplexed and fed into dual-output MZM. Biasing the dual-output MZM at null point generates central carriers in one output port and first-order sidebands in another output port. Reflective semiconductor optical amplifier modulates both the central carriers and sidebands with wired and wireless data, respectively. The modulated optical signals are combined by polarization beam splitter and transmitted through 25-km single-mode fiber. The performance of the proposed scheme is proved by clear eye-diagrams and great bit error rate (BER) curves. Moreover, the power penalty at the BER of 10^-9 is less than 1 dB for both wired and wireless signals. Therefore, the proposed system simultaneously transmits wired and wireless signals.     

Bidirectional colorless wired and wireless WDM-PON with improved dispersion tolerance for radio over fiber

We propose and demonstrate a bidirectional transmission, hybrid wired and wireless access network based on subcarrier modulation (SCM) techniques. The scheme simultaneously enables the dispersion-tolerant transmission of millimeter (mm)-wave signals for use in wireless access networks, downstream baseband signals for optical wired access networks, and optical continuous-wave (CW) carriers for use in upstream data remodulations. Error-free transmissions through a 25-km length of single mode fiber (SMF) for both the downstream baseband and the remodulated upstream signals are confirmed by bit-error-rate (BER) measurements. The dispersion tolerance of the radio-over-fiber (RoF) signal is assessed using numerical simulations.     

Alternative Wired and 60-GHz Wireless Full Duplex Access Based on a Polarization Orthogonal Dual-Tone Optical Millimeter-Wave Signal

Abstract

A novel full duplex fiber wireless link providing alternative wired and 60-GHz wireless access is proposed based on a polarization orthogonal dual-tone optical millimeter-wave signal. In a hybrid optical network unit, the downlink optical signal can be decomposed as a single-sideband optical millimeter-wave signal (baseband optical signal) for wireless (wired) access by a polarization controller and polarization beam splitter. The uplink optical carrier abstracted from the downlink optical signal makes the hybrid optical network unit free from the optical source. The simulation results show that both downlinks and uplinks for either wired or wireless access can maintain quite good performance over 60 km of fiber.     

Full-Duplex Link Providing Alternative Wired and Wireless Broadband Access for the Wavelength-Division Multiplexing Passive Optical Network with a Uniform Converged Signal Format

Abstract

A full-duplex link implementing alternative wired and wireless access for wavelength-division multiplexing passive optical network is proposed with the uniformed three-tone converged optical signal, which provides a wired or wireless downlink access signal alternatively and an uplink optical carrier. The uplink optical carrier reversed by the converged optical signal makes the hybrid optical node unit free from the optical source. The simulation results show that the full-duplex link with a 10-Gb/s 16-quadrature amplitude modulation (16-QAM) downstream and 5 Gb/s binary upstream can provide both wired access with a bit-error rate below 10^?9 and radio-over-fiber-based wireless access with a bit-error rate below 10^?7 over 40 km of fiber without an optical source and optical amplifier in the hybrid optical node unit.     

Investigation of a high-speed optical FSK scheme for WDM-PON applications with centralized lightwave source

This paper proposes and numerically investigates a novel high-speed wavelength-division-multiplexed passive optical network (WDM-PON) architecture with colorless user terminals based on the use of orthogonal modulation scheme for downstream and upstream transmission. The 40 Gb/s optical frequency shift keyed (FSK) downstream data is generated based on carrier-suppressed modulation. At optical network unit, the downstream signal is directly re-modulated by the 2.5 Gb/s up-stream data and sent back with the same fiber. Error free transmission over 20 km single mode fiber can be observed for both downstream and upstream signals in our simulation. Power budget, tolerance of channel spacing, FSK tone spacing and dispersion are all investigated. Factors that might influence the stability of the system are analyzed and an extended hybrid wired/wireless version of the scheme is also given.     

基于CC2530的无线温度传感器网络的设计

传统的有线温度测量由于线路复杂常存在造价昂贵、信噪比低等问题,为解决这些弊端,设计了一种基于 CC2530和 ZigBee 协议的无线温度传感器网络,硬件结构非常简单,更有利于狭小空间下的温度监测。该系统使用DS18B20数字温度传感器对环境进行温度测量;以射频芯片CC2530为核心,使用其标准的增强型8051 CPU对数据进行处理与控制;使用ZigBee协议建立无线通信网络,将测得的环境温度通过LCD显示。最后,通过实验测试证明该系统可以有效地测量不同地点的温度并无线组网,能够实现低功耗、高精度、远距离的无线传输。     

基于光注入Fabry-Perot半导体激光器实现同步全光分路时钟提取与波长转换

提出了一种利用Fabry-Perot（FP）半导体激光器同步提取波长转换的分路光时钟的新方法,并对该方法进行了数值模拟和实验验证.光注入半导体激光器会产生非线性单周期振荡特性,利用交叉增益调制效应及对单周期振荡的微波锁频效应,可从光时分复用信号中提取出波长转换的分路光时钟.采用一个FP半导体激光器作为全光分路时钟提取及波长转换器,数值模拟实现了从波长为1555 nm、速率为2×20 Gb/s的光时分复用信号中提取出波长转换为1550 nm、重复频率为20 GHz的分路光时钟,实验完成了从波长为155024 nm、重复频率为1236 GHz光脉冲信号中提取出相位噪声为-105 dBc/Hz的波长为154591 nm、重复频率618 GHz的分频光时钟.此外还详细研究了注入光功率、波长失谐、FP激光器偏置电流及纵模选择对光时钟提取的影响,实验结果和数值模拟结果符合.该方法在光时分复用混合波分复用通信系统中实现全光解复用及波长路由有着重要的应用价值. 关键词： 波长转换 时钟提取 光注入 非线性动力学     

Investigation of broadcasting signal overlay using high-frequency filtering characteristics of RSOA in ASE seeded WDM access network

The simultaneous baseband and broadcasting signal transmission based on wavelength division multiplexing-passive optical network access network are proposed and their experimental verifications are shown. Amplified spontaneous emitting source modulated by broadcasting signal in radio frequency band at reflective semiconductor optical amplifier is provided as seed source for wired signal modulation. The filtered amplified spontaneous emitting source is aligned to each channel and modulated by the downlink baseband signal at RSOA. Simultaneous downstream transmission of baseband and broadcasting signals over 23-km SMF is experimentally verified. Mutual interference between broadcasting and baseband signals, nonlinearity by two tone analysis, and performance variation on temperature are investigated.     

Experimental demonstration of polarization multiplexing for simultaneously providing broadband wireless and wired access

A fiber-based wavelength-division-multiplexing (WDM) network utilizing polarization multiplexing (PolMUX) is proposed to simultaneously provide broadband wireless and wired services. In such a dual-service access network, the wireless and wired services are separately delivered in two orthogonal states of polarization with well independence in a single WDM channel. The impact of several polarization-dependent interferences becomes insignificant due to the relatively short transmission distance in access networks. The feasibility of PolMUX is experimentally demonstrated with a power penalty at BER = 10^-9 of about 0.5 dB and 1 dB for 2.5 Gb/s wired and wireless downstream services, respectively. The proposed system is compatible with the current reported techniques in either WDM passive optical networks (WDM-PON) or radio-over-fiber (ROF) systems.     

实时主动声定位系统设计*

针对在军事演习或爆炸实验中对冲击波超压传感器位置的精确定位,设计了一种实时主动声定位系统。该系统由声信号发射系统、声信号接收处理系统和无线监控终端系统三部分组成。声信号发射系统与无线监控终端以单片机STC12C5A60S2作为核心控制器,接收处理系统以ARM9系列的S3C2440作为核心控制器。发射系统发射四种已知频率的声信号,接收处理系统接收并处理收到的四种声信号,然后把处理结果反馈到无线监控终端。通过实验表明,该系统在一定条件下,能够稳定地发射、接收并处理声信号,达到实时定位目标,并在200 m范围内将定位误差控制在厘米级内。     

分块稀疏信号1-bit压缩感知重建方法

1-bit压缩感知理论指出:对稀疏信号进行少量线性投影并对投影信号进行1-bit量化,该1-bit信号包含足够的信息,从而能对原始信号进行高精度重建.然而,当信号难以进行稀疏表达时,传统1-bit压缩感知算法无法精确重建原始信号.前期研究表明,分块稀疏模型作为一种特殊的结构型稀疏模型,对于难以用传统稀疏模型进行表达的信号具有较好的表达作用.本文提出了一种针对分块稀疏信号的1-bit压缩感知重建方法,该方法利用分块稀疏的统计特性对信号进行数学建模,通过变分贝叶斯推断方法进行信号重建并在光电容积脉搏波(photoplethysmography)信号上进行了实验验证.实验结果表明,与现有1-bit压缩感知重建方法相比,本文方法重建精度更高,且收敛速度更快.     

On injection-locking of inhomogeneously pumped semiconductor lasers

The injection-locking of an inhomogeneously pumped two-section semiconductor laser enhances continuous wave (CW) operation. The injected signal can be used to change the mode of operation of the laser from pulsation to CW. In the pulsation regime, it causes an increase of the pulsation frequency. In the CW operation regime, the injected signal causes a reduction in the modulation characteristics peak.     

Cost-effective radio over fiber system for multi service wireless signal

The feasibility of the simultaneous transmission of several wireless signals over a cost-effective Radio over Fiber (RoF) link is investigated. A RoF link simulation tool is presented and applied to validate the experimental results in the case of the transmission of two wireless signals, one compliant to Universal Mobile Telecommunications Service (UMTS) and one to Worldwide Interoperability for Microwave Access (WiMAX) standards. The cross-talk between the transmitted signals is showed and related to the RoF transmitter's characteristic in terms of frequency chirping. Both for uplink and downlink of the wireless signal RoF distribution system practical design aspects are finally evidenced.     

WDM-PON upstream transmission using Fabry–Perot laser diodes externally injected by polarization-insensitive spectrum-sliced supercontinuum pulses

We propose, a novel upstream transmission scheme for high speed wavelength division multiplexed passive optical networks. Upstream transmission at bit rate of 2.5 Gb/s was demonstrated using a Fabry–Perot (FP) laser diode (LD) externally injected by a spectrum-sliced polarization-insensitive supercontinuum pulse source, located at central office. The impact of Rayleigh backscattering on transmission performance is also investigated. The proposed scheme is expected to be cost-effective since low-cost FP LDs are used for light sources.     

60 GHz Radio over Fiber Technology for Wireless Access by employing Narrow-Angle PSK Modulation

This paper investigates two key techniques used in 60 GHz Radio over Fiber (RoF) technology for wireless access, namely, the generation of 60 GHz signals and the distribution of 60 GHz local oscillator (LO). In the proposed model, a 60 GHz PSK signal is generated by a heterodyne of two subcarriers with narrow-angle PSK (NA-PSK) modulation, whose phase shift is equal to one half that of a normal PSK signal. Then we use a 60 GHz mixer to frequency mix two PSK signals in two different bands, 60 GHz and baseband. By doing this, the modulation information can be fully eliminated, resulting in a 60 GHz LO. In the wireless terminal, coherent demodulation is realized by a self-mixing of the transmitted 60 GHz PSK signal and LO. Thus no millimeter-wave (mm-wave) band oscillator is needed in the wireless terminal.     

某型指挥信息系统有线远传接口自动识别方法

为提高对指挥信息系统有线远距离传输接口测试的自动化水平,提出一种基于信号特征提取的信号类型自动识别方法。在对各类接口信号时域和频域特性分析的基础上,采用限幅滤波法实现对信号峰峰值的准确判断,通过基于Burg算法AR模型的谱估计方法实现信号频谱准确估计。依据提取到的信号峰峰值和频带宽度,采用双阀值判决方法对接口类别进行自动识别。实验结果表明,基于信号时频域特征差异的自动识别方法,能够有效区分3种类型15个接口,识别准确度达到87%以上。     

A Signal processing method of OFDM communication receiver based on CNN

Orthogonal frequency division multiplexing (OFDM) the signal processing is a key issue in wireless communication research. The multipath effect and Doppler shift of wireless communication channels can lead to distortion of the transmitted signal, which poses a considerable challenge to the information recovery of communication receivers. This paper presents the signal processing method of OFDM communication based on convolutional neural network (CNN). The method replaces all signal processing modules of the OFDM communication receiver with CNN, and the information is recovered by the CNN. In order to adapt to the processing of communication signals, we designed a one-dimensional convolutional neural network (1D-CONV-CNN) model as the neural network structures by this method. Simulation results indicate that the signal processing method effectively reduces the bit error rate (BER) and improves its performance compared with the conventional reception method under different channel conditions.     

F-P半导体激光器实现多波长注入锁定

F-P半导体激光器中对于TE模比TM模有更大的束缚系数,并且在其反射面上有更高的反射率.当TE模和TM模同时注入F-P半导体激光器的谐振腔时,TE模方向的信号得到增长,TM模方向的信号受到抑制.F-P半导体激光器的这种特性使得它类似于一个偏振器,但是其优越之处在于经过F-P半导体激光器注入锁定之后的光信号没有功率损耗.采用F-P半导体激光器的注入锁定原理,使入射光信号没有功率损耗地由偏振光转换为部分偏振光,降低了通信系统中传输信号的偏振敏感性,使传输信号的质量得到提高,实现了F-P半导体激光器三波长和四波长注入锁定.     

GHz frequency band soliton generation using integrated ring resonator for WiMAX optical communication

New system of optical soliton signal generation with a high frequency band is presented. Microring resonator can be used to generate soliton signals with high frequency of GHz. These signals can be transmitted via a wireless network system known as WiMAX, which is providing broadband wireless access up to 50 km. The soliton pulses are more stable with less loss during propagation which is good candidate compare to other current optical waves used in optical communication. In this study, soliton pulses with full width at half maximum of 3 MHz and FSR of 85 MHz could be generated using an add/drop filter system which is used to generate high frequency signals, required for wireless network systems. These pulses can be used as carrier signals in order to transmit information codes without significant changes, thus improving transmission quality and delivery of the right information.