Kerr nonlinear switch based on ultra-compact photonic crystal directional coupler

In this paper, an all optical switch based on nonlinear photonic crystal directional coupler has been simulated and analyzed by the finite difference time domain (FDTD) method. The lunched pump signal increases the refractive indices of the central row of the coupler, due to nonlinear Kerr effect, hence the coupler works in the nonlinear conditions and lightwave guides to the other output port. We have tried to increase the coupling efficiency and reduce the required power in the nonlinear status by optimizing the bends structure and increasing the interaction between dielectric and lightwave signal. Therefore, the input signal beam can be controlled to be exchanged between two output ports to earn the highest output power ratio and the smallest amount of power required for nonlinear performance, the physical length of the coupler is determined to be 20a, where a is the structure lattice constant.     

掺铒光纤非线性耦合器的实验研究

提出一种耦合参量可用光调控的掺铒光纤非线性耦合器.用熔融拉锥法熔合两根掺铒光纤,拉制成工作波长为155nm的3dB掺铒光纤耦合器.通过调变输入耦合器一臂的980nm泵浦光功率,可以改变两臂的传播常量差,从而改变耦合器两臂信号光的相对输出功率.通过测量输入泵浦光功率和两臂信号光输出功率,得到直通臂耦合比依赖于泵浦光功率的实验曲线.实验研究表明,当泵浦光功率从0 mW变化至20 mW时,耦合比的变化可达到40％.与理论模拟的结果一致.     

掺铒光纤环镜中超短光孤子的放大与压缩Ⅱ.环镜及输入脉冲特性对放大结果的影响

最近的研究发现,用掺铒光纤环镜放大并压缩超短光孤子不仅能避免常规掺铒光纤放大器中由于非线性效应引起的孤子畸变,而且可克服绝热放大技术中放大器长度随输入脉宽增大而指数规律增大的困难。进一步研究了环镜及输入脉冲特性对放大结果的影响。数值计算表明,对于确定的输入脉冲,当环镜参量(环镜长度、增益、耦合器功率耦合系数)在较大范围内变化时,环镜放大器的孤子输出性能基本稳定。对于确定的环镜,输入脉冲形状的变化、初始输入功率的起伏以及高阶效应等因素对放大结果的影响较小;相对而言,初始频率啁啾对输出孤子宽度的影响较大,但对输出孤子质量的影响并不严重。     

Gain-induced soliton switching in fiber nonlinear directional coupler

With study for switching characteristics and output coupling ratio of fiber nonlinear directional couplers (NLDC), we found that the influence elements on the switching characteristics and output coupling ratio had gain of core 1 and 2, nonlinear coefficient of those, the input power and width of input soliton. We also found numerically that switching efficiencies were improved by controlling gain of core 1, different output coupling ratio would be obtained by controlling gain of core 1 or 2. And we can change the gain by changing pump power of the optical fiber amplifiers. From this, we also made fiber coupler which output coupling ratio was changeable.     

硅基二维光子晶体耦合器理论研究

光子晶体是一种具有光子带隙的新型人工材料,利用其具有控制和限制光子运动的特性可以制成新颖的光学器件。利用硅基二维光子晶体,提出了一种4端口耦合器。采用时域有限差分法作为研究工具,TM模作为研究对象,从理论上分析了这种器件的特性。在不同的耦合长度下研究光在输出端的功率透射率。结果表明选择适当的耦合长度可以使光在器件中呈现不同的状态。进一步研究表明,通过改变器件内部介质柱的半径,可以改变光在输出端的输出功率。从而证实了这种器件不仅具有波长选择性,而且具有潜在的可调节性,这些特性使得这种器件在全光开关的应用上具有潜在的优势。     

Tapered fused fiber bundle coupler capable of 1 kW laser combining and 300 W laser splitting

A high efficiency 7 × 1 multimode fiber coupler using the method of fusion and tapering is reported. This coupler can be applied to combine laser power, ad it can be used as a 1 × 7 splitter with reversible simultaneously. In the experiment, for combiner, coupling output power of 1032 W is obtained with the input power of 1066 W. The total coupling efficiency is 96.8%. The average insertion loss of each input fiber is 0.14 dB at ∼150 W input power. To splitter, the sum of 7 output ports power is 294 W with the input power of 341 W, and the insertion loss is about 13.8%. This fiber coupler can be applied in pumping all-fiber double clad fiber laser, as well as power combination and splitting of fiber lasers.     

All-optical Steerable Directional Coupler Using Kerr Dark Spatial Soliton Waveguides

1.IntroductionOpticalspatialsolitoninduced-waveguidesareofgreatresearchinterestrecently[1-8]becauseoftheirPOtentialapplicationinopticalcommunicationsandopticalcompution.Asoliton--inducedwaveguidecanguidelightinself--focusingorself--defocusingKerr-typemediabecausethesolitonbeaminducesarefractive-indexprofileequivalenttoanordinarydielectricwaveguide.Soliton-inducedwaveguidecansupPOrtmanymodesofaprobebeampropagatingcoaxiallyalongthesolitonwaveguideSoliton-inducedwaveguideshaveadvantageovertheir…     

Soliton switching study using new normalized nonlinear Schrödinger equations

Soliton switching in a nonlinear directional coupler (NLDC) is studied by using new normalized nonlinear Schrödinger equations (NLSE). The resulted equations have one parameter κL_D only, this feature greatly simplifies the numerical study of soliton coupling in a NLDC, and it enables us to derive the soliton switching conditions based on numerical analysis. Numerical results show that most of the input soliton energy remains in the launched waveguide when input soliton normalized peak power is bigger than 2.5. It is contrary to the existing theoretical expectations which were derived using variational approach. The fundamental soliton switching conditions is also expressed in terms of input soliton pulse width. In addition, it is found that frequency chirp degrades soliton switching performance in a NLDC.     

SES微波脉冲压缩系统瞬态特性的模拟研究

 通过MATLAB编程,实现了储能切换（stored energy switch）方式产生高功率微波脉冲瞬态响应过程的模拟。程序可用于研究微波压缩系统的功率增益、储能转换效率及脉宽压缩比等主要指标与系统开关耦合腔的固有品质因数、输入与输出耦合系数的关系;并可用于对工作频率失谐、“开关”导通前的泄漏及“开关”启动时间的影响等进行分析,输出瞬态响应过程图像。     

On the radiation mode effects in integrated optical directional couplers

In this work we study the effect of radiation modes generated at the input of a directional coupler on its performance. We focus on the splitting ratio and the coupling length of the coupler. The Beam Propagation Method (BPM) is used for numerical simulation. Numerical results are compared to analytical expectations of the coupled mode theory (CMT). We show that, when the coupler is excited by a single mode fibre, ideal 3 dB couplers could be obtained by a simple adjustment of the exciting fibre. On the other hand, when the coupler has input and output bend structures, its coupling length as well as its splitting ratio are affected by the geometry of this bend.     

Photonic Crystal Power-splitter Based on Mode Splitting of Directional Coupling Waveguides

In the paper, a novel power-splitting scheme based on two dimensional photonic crystal (2D PhC) is proposed. The structure can be divided into three sections, including the input waveguide, coupling region, and output region, and the latter two sections consist of two parallel waveguides placed in proximity. The operation principle of the splitter is that only one of the super-modes splitting from the directional coupler can propagate through coupling region in the frequency range of interest. The radius of air holes next to the guiding region in coupling region is increased to avoid the acute back reflection at the entrance to the input waveguide induced by the modes mismatch between the input waveguide and coupling region. While in output region, the radius of these corresponding air holes is also increased so that the two splitting super-modes have same propagation constants to avoid the coupling between the two output waveguides. Moreover, as the length of coupling region is varied, its influence on the splitting performance is discussed, and it is verified that the relationship between the splitter length and bandwidth has a trade-off.     

Demonstration of an all-optical switching operation using an optical fiber grating coupler

An optical fiber grating coupler (FGC) is a fused optical fiber coupler with a tapered region in which refractive index-modulated gratings are written. In the FGC, the light with specific wavelength satisfying the Bragg condition of the grating can be dropped to one output port and other lights are transmitted to another output port when lights with various wavelengths are launched into the input port. The FGC can operate as an all-optical switch by controlling the Bragg wavelength of the grating using a third order nonlinear optical effect caused by a control light that are launched with a signal light. In this paper, an all-optical switching operation due to a third order nonlinear optical effect in an FGC is first demonstrated for a signal light with 1.55 μm-wavelength to be changed from one port of the FGC to another one by the 720 W peak of a control light from a Nd:YAG laser with 1.06 μm-wavelength. The switching efficiency obtained was 7%. It was clarified that a longer pulse length of the control light compared to the grating length is required to obtain a large Bragg wavelength shift for the switching. It was also clarified that the Bragg wavelength shift is caused by a third order nonlinear effect and a photothermal effect. A contribution of the photothermal effect was estimated. We also estimated the switching efficiency for pump power in the FGC switch.     

外腔共振和频系统中阻抗匹配的理论研究

外腔共振是提高和频效率的有效方法. 实现外腔共振高效和频需要基频光高效地耦合到外部谐振腔中, 因此系统要达到阻抗匹配. 本文分别建立了双波长和单波长外腔共振和频系统的理论模型, 分析了腔增强因子与耦合腔镜反射率、入射基频光功率等参数的依赖关系, 通过数值模拟获得最优化的共振光耦合腔镜反射率, 使系统达到阻抗匹配, 提高和频效率. 研究表明, 无论双波长还是单波长外腔共振和频系统, 共振基频光的最佳耦合腔镜反射率只会随着另一束共振或者不共振的基频光入射功率的增加而减小, 而其本身的入射功率变化则影响较小; 进一步分析表明, 若共振基频光的耦合腔镜反射率超过阻抗匹配值, 和频光功率将会迅速减小, 而小于阻抗匹配值时, 和频光功率减少速度相对较慢, 因此实验过程中要尽量避免过耦合的情况出现. 本文的理论分析过程将对外腔和频实验有一定的指导意义.     

Study of ultra-fast optical pulse propagation in a nonlinear directional coupler

We showed that the application of a soliton in a nonlinear coupler does not show a better switching performance than a Gaussian pulse, unlike what the existing theory expected. Like the Gaussian pulse, a soliton could also suffer distortion, broadening, or narrowing in a nonlinear directional coupler. In addition, by using a new normalized format the linearly coupled nonlinear Schrödinger equations were investigated. For the first time, we found that both the coupling behavior and the switching performance of pulses in a nonlinear coupler depend on the product of the coupling coefficient and the dispersion length. We also showed that for a given nonlinear coupler with a Gaussian-like or soliton-like pulse input, switching performance and whether a pulse breaks up or not mainly depend on the input pulse width, not the pulse shape. PACS 42.65.Tg; 42.65.Wi; 42.81.Qb     

MZ-MMI-based all-optical switch using nonlinear coupled waveguides

We propose an all-optical switch (AOS) based on Mach-Zehnder (MZ) and Multi-mode interference (MMI) using nonlinear closely coupled waveguides. The device operates by switching between two states of coupled waveguides. In first state the refractive index of waveguides are same and light field will completely couple to nonlinear waveguide in half length of coupler and will back in the second half. We will have π phase difference in this procedure and the input field will appear in Bar-state output. In the second state the refractive index of nonlinear waveguide increase with high intensity control field. In this case, we have lower coupling and change in phase. But, we choose the best refractive index change to obtain the phase change of multiple of 2π necessary for Cross-state in output. The beam propagation method is used to simulate the device operation.     

Analysis of a gained nonlinear directional coupler pulse switch

We have investigated the switching performance of a gained (nonlinear directional coupler) NLDC switch in the presence of both 2nd and 4th order gain nonlinearities. In this system, we have achieved a nearly complete pulse switching at half beat length of the coupler which implies about 40% reduction in the switching length as compared to the switching length reported in Trillo et al. (1988). We have shown that at the half beat length the output energy of each branch is equal to that of the input energy and hence the gained NLDC switches have ability to be cascaded. Our initial investigations reveal that this gained NLDC switch has remarkable performance and potential to be used in ultra-fast optical communication systems.     

Signal amplification based on the local nonlinear Mach–Zehnder interferometer

Using the phase modulation of spatial solitons, a new scheme for all-optical signal amplification has been proposed in this paper. The considered structure is composed of the nonlinear Mach–Zehnder interferometer (NMZI) with the straight control waveguide (CWG), the uniform nonlinear medium (NLM) and the linear output waveguide. The local NMZI functions like a phase shifter. The light-induced index changes in the local nonlinear MZI are responsible for the input beam routing in the uniform nonlinear medium. The coupling of the input beam to the output waveguide depends on its propagation direction in the NLM. It is shown that the signal launched at CWG can deflect the beam launched at the NMZI (input beam) and a modulated (amplified) output could be obtained at the output waveguide. Further, signal pulse may be reshaped by appropriately increasing the NLM length. In addition, amplification factor may be enhanced by increasing the NLM length and injecting an appropriate continuous wave beam along with the signal beam at CWG.     

Three-port beam splitters-combiners for interferometer applications

We derive generic phase and amplitude coupling relations for beam splitters-combiners that couple a single port with three output ports or input ports, respectively. We apply the coupling relations to a reflection grating that serves as a coupler to a single-ended Fabry-Perot ring cavity. In the impedance-matched case such an interferometer can act as an all-reflective ring mode cleaner. It is further shown that in the highly undercoupled case almost complete separation of carrier power and phase signal from a cavity strain can be achieved.     

2μm泵浦中红外硫化玻璃光纤拉曼激光器的理论分析与优化

根据2μm掺铥光纤激光泵浦中红外硫化玻璃光纤拉曼激光器的模型,采用非线性耦合方程组对激光器的性能进行了研究与分析。同时,对激光器各参数包括光纤长度、输出耦合器反射率、光纤散射损耗对激光器性能的影响进行了分析并给出了优化结果。数值仿真结果表明,在一定条件下,2μm泵浦硫化玻璃光纤产生拉曼激光的斜率效率可以超过85%。另外,光纤长度和输出耦合器反射率不仅对输出激光功率的影响很大,而且是相互影响的,必须同时进行优化。结果也表明,输出激光的功率随光纤散射损耗增加急剧线性下降。以上的结果可以用于硫化玻璃光纤级联拉曼激光器的实验指导和优化设计。     

紧凑型菱形缝隙V波段过模圆波导选模耦合器

设计了一种用于测量V波段过模高功率毫米波源在线功率的选模耦合器。利用小孔耦合理论和微元法对菱形耦合缝隙进行了理论分析，采用两组相同的菱形耦合缝隙实现选模功能，缩短了耦合器长度，增加了工作带宽。采用数值模拟的方法对耦合器结构进行优化设计，模拟结果表明:在60 GHz频点处，TM01模耦合度约为50 dB，TM02模耦合度仅为75 dB，对TM02模的抑制度为25 dB；在500 MHz带宽内对TM02模的抑制度大于15 dB，1 GHz带宽内的抑制度大于10 dB，可满足工作于TM01模的V波段高功率毫米波测试需求。同时针对工作于高次模TM0n（n=2,3,4,）的器件设计了可抑制TM01模的耦合器，为高次模工作的高功率毫米波器件的在线功率测量和模式诊断提供了技术方案。