Predistortion techniques for synthesizing coupled microring filters with loss

A general method based on the predistortion technique is presented for determining the optimum coupling parameters of multiple-coupled microring filters in the presence of known uniform resonator loss. The technique involves predistorting the filter transfer function by shifting its poles and zeros to compensate for loss in the microring resonators due to material absorption, surface roughness scattering, coupling loss and bending loss. It is shown that by sacrificing some in-band insertion loss, both the amplitude and group delay responses of the filter can be recovered when loss is present. Application of the method to synthesizing lossy microring filters in both the digital z-domain and analog s-domain will be presented. The proposed technique is general in that it can be applied to both amplitude and phase filters constructed of coupled microresonators in the most general two-dimensional coupling topology.     

Performance Investigation of Photonic Crystal-Based Microring Resonator for Optical Signal Processing

Abstract

A detailed theoretical analysis is presented to characterize wave propagation at 1,550 nm inside a glass (SiO₂) microring resonator implemented using photonic crystal technology. A photonic crystal reflection is used at each microring resonator corner to enhance the bending efficiency. The characteristics of both photonic crystal beam splitter and microring resonator bending losses are analyzed and investigated using both effective refractive index and finite difference time domain methods. Analytical expressions are also derived to describe the field enhancement inside the microring resonator, the transfer function of the microring resonator, and the main parameters characterizing the resonator such as resonator band width and quality factor. The analysis is also extended to characterize a drop filter implemented using photonic crystal-based microring resonator. The results indicate clearly that the effective refractive index method can give accurate results if one starts the calculations with finite difference time domain-estimated beam splitter parameters. Further, bending efficiency as high as 99% can be obtained using a ten-post layer photonic crystal mirror at each microring resonator corner.     

双微环谐振腔耦合的双波长半导体激光器（英）

提出一种新颖的单片集成双微环耦合的双波长半导体激光器结构。集成于激光腔内的2个微环谐振腔作为模式选择滤波器,通过游标效应选择谐振模式,同时还可作为等效的反射镜面以形成行波腔。这种无需解理的行波激光腔代替了需要解理面的法布里-珀罗驻波腔。理论仿真表明,跟驻波腔结构相比,行波腔双微环激光器结构简单,可获得约34 mA的较低的阈值电流和大于31 dB的边模抑制比。合理地控制有源区的增益峰值和谐振模式分布,该激光器能提供一致性和稳定性较好的双波长激光输出。     

Multi-soliton generation with extremely narrow free spectrum range for multiplexed sensors via optical network

We propose a new system of multiplexer sensors using the localized soliton pulse generated by a microring resonator in optical networks. A large bandwidth signal is generated by a soliton pulse propagating within the microring resonator, which is allowed to form the multiplexed sensors. Two forms of soliton pulses are generated and localized, i.e. temporal and spatial solitons. The required soliton pulses with specified wavelengths can be localized and formed the sensing. This is formed by using an optical add/drop multiplexer incorporating in the optical network, where the localized soliton pulses are available for add/drop signals to/from the optical network. The change in physical parameter measured the change in soliton wavelength, which formed the measurement.     

Wide-range tuning of polymer microring resonators by the photobleaching of CLD-1 chromophores

We present a simple and effective method for the postfabrication trimming of optical microresonators. We photobleach CLD-1 chromophores to tune the resonance wavelengths of polymer microring resonator optical notch filters. A maximum wavelength shift of -8.73 nm is observed. The resonators are fabricated with a soft-lithography molding technique and have an intrinsic Q value of 2.6 x 10(4) and a finesse of 9.3. The maximum extinction ratio of the resonator filters is -34 dB, indicating that the critical coupling condition has been satisfied.     

Filter synthesis for periodically coupled microring resonators

The theory of filter synthesis using periodically coupled microring resonators is developed as a means to overcome the fabrication sensitivities inherent in conventional higher-order filters, while still achieving desirable spectral characteristics. Each resonator in the array can compensate for deficiencies in any of the others. These filters exhibit a boxlike shape and very high extinction ratios.     

Slotted Photonic Crystal Microring Resonators

We propose using a slotted photonic crystal nanobeam to construct a microring resonator. The transmission characteristics of the slotted photonic crystal nanobeam and the microring resonator are demonstrated by two-dimensional finite-difference time-domain simulation, and the mechanism of these characteristics is analyzed considering the introduction of the slot. The refractive index sensitivity of the slotted photonic crystal microring resonator is evaluated to be larger than those of a slot waveguide microring resonator and a nonslotted photonic crystal microring resonator.     

Vertically coupled GaInAsP--InP microring resonators

Vertically coupled microring resonator channel-dropping filters are demonstrated in the GaInAsP-InP material system. These devices were fabricated without regrowth. In this method, low-loss single-mode waveguides are removed from the growth substrate and bonded to a GaAs transfer substrate with benzocyclobutene. This permits fabrication of vertically coupled waveguides on both sides of the epilayer. Optical quality facets are obtained by cleaving through the transfer substrate. Operation of single-mode, single-ring optical channel-dropping filters is demonstrated.     

传输矩阵法分析微环谐振器阵列传输特性

微环谐振器可用作未来高密度、超大规模集成光路的基本构件,其重要发展方向之一是多环化、阵列化,微环谐振器阵列近来成为研究的热点。基于定向耦合器、环形谐振腔、直波导腔的基本单元传输矩阵,建立了用于分析微环谐振器阵列传输特性的传输矩阵模型。讨论了列间距对传输特性的影响,并数值模拟了不同尺度的奇数行和偶数行情况下谐振器阵列的传输特性。结合此传输矩阵模型,讨论了通过改变微环谐振器阵列的尺度以及耦合系数以实现滤波特性改善的方案。最后数值研究了最小尺度微环谐振器阵列传输特性与腔间耦合系数的关系。     

Single-photon all-optical switching using coupled microring resonators

We study the nonlinear phase response of a microring resonator coupled to a bus waveguide and the use of this nonlinear phase shift to store information in the microring resonator and enhance the switching characteristics of a Mach-Zehnder interferometer (MZI). By introducing coupling between adjacent microring resonators, the switching characteristics of the MZI can be exponentially enhanced as a function of the number of microring resonators, when compared to the linear enhancement for uncoupled resonators. With only a few moderate-finesse microring resonators, the switching power can be reduced to attowatt level, allowing for photonic switching devices that operate at single-photon level in ordinary optical waveguides.      

1×|N 信道聚合物微环谐振器电光开关阵列的开关特性

利用耦合模理论、电光调制理论和微环谐振理论,提出了一个完善合理的聚合物微环谐振器电光开关阵列模型.该器件由1条水平信道、N条竖直信道和N个微环构成,在微环上施加不同方式的驱动电压,可以实现N＋1条信道的开关功能.以1×8信道结构为例,在1 550 nm谐振波长下对该器件进行了优化设计和模拟分析.其结果是：微环波导芯的截面尺寸为1.7×1.7 μm2,波导芯与电极间的缓冲层厚度为2.5 μm,电极厚度为0.2 μm,微环半径为13.76 μm,微环与信道间的耦合间距为0.14 μm,输出光谱的3 dB带宽约为0.05 nm,开关电压约为12.6 V,插入损耗约为0.67~1.26 dB,串扰小于－20 dB,开关时间约为11.35 ps.     

Mode cycling in microring optical resonators

Electromagnetic resonators are important not only as realizable models of fundamental concepts in classical and quantum physics, based on the existence and properties of eigenmodes, but also in the practical design of lasers, amplifiers, sensors, filters, and delay lines. Coupled-eigenmode systems may be realized via the multiple eigenmodes of a single resonator or by the coupling of a mode across multiple resonators. Mode cycling is demonstrated as a distinct concept of sequential population transfer in coupled multiple-eigenvalue resonators. Based on this principle, a coupled polymeric microring resonator interferometer is fabricated and characterized; the device achieves greater than 30 dB extinction and (loaded) Q approximately 5.5 x 10(3).     

聚合物波导微环谐振器的无热化设计

从波导微环谐振器的谐振方程出发,推导出了波导微环谐振器的无热化条件和谐振波长温度依赖特性表达式,分析了硅衬底PSQ聚合物波导微环谐振器滤波功能的温度特性。通过选择合适的聚合物衬底来取代传统的硅衬底,可极大地减小聚合物波导微环谐振器的温度敏感性,给出了聚合物衬底选择的方法。研究结果表明,所设计的全聚合物波导微环谐振器,在温度从20～65℃范围内谐振波长漂移量最大值为-0.0085 nm,温度依赖波长漂移率最大值为-0.00090 nm/K,实现了无热化。     

Analyzing and tailoring spectra of arbitrary microring resonator arrays based on six transfer cells and simulated annealing algorithm

A simple approach based on six transfer cells and simulated annealing algorithm for analyzing and tailoring the spectra of arbitrary microring resonator arrays is presented. Coupling coefficients, ring sizes, and waveguide lengths of microring resonator arrays can be arbitrary in this approach. After developing this approach, several examples are demonstrated and optimized for various configurations of microring resonator arrays. Simulation results show that this approach is intuitive, efficient, and intelligent for applications based on microring resonator arrays.     

Embedded ring resonators for microphotonic applications

We propose a new type of optical resonator that consists of embedded ring resonators (ERRs). The resonators exhibit unique amplitude and phase characteristics and allow designing compact filters, modulators, and delay elements. A basic configuration of the ERRs with two rings coupled in a point-to-point manner is discussed under two operating conditions. An ERR-based microring modulator shows a high operation speed up to 30 GHz. ERRs with distributed coupling are briefly described as well.     

Electro-optically tunable microring resonators on lithium niobate

Electro-optical tuning of a microring resonator fabricated on lithium niobate (LiNbO3) is presented. The device structure, including microring resonator and couplers, is designed in detail and is produced by titanium diffusion on the wet-etched LiNbO3 ridge surface. The resonance wavelengths for TM and TE polarizations can be tuned by electro-optic effect. The output characteristics of through port and drop port in the microring resonators are measured, and the effect of applied voltage on the shift of resonant wavelength is discussed. The presented microring resonators have the features of fast tuning speed, high material stability, bidirection wavelength shift, and no heating interference. Realization of such a microring resonator on LiNbO3 makes the utilization of electro-optic tuning and nonlinear effects in the versatile photonic applications of microring resonators achievable.     

Photonic microring resonator modulated resonance response analysis

This paper presents the resonance response analysis of a photonic microring resonator. It covers the mathematical as well as simulation analysis on the modulated signals. The mathematical formulation provides a relation of several microring resonator parameters that could potentially affect the ring resonator performances. The simulation shows a graphical representation of the ring resonator full-width at half-max, quality factor (Q-factor) as well as the depth of the resonance at different modulation voltages applied to the ring. Several parameters have also been altered which is the ring radius, the coupling coefficient of the waveguides as well as the waveguide material group index. With this investigation, we determine the possible cause of the change in Q factor of a silicon microring resonator when the resonance is modulated and the possible solution to minimize the problem.     

基于硅基槽波导的单纤三向滤波器的研究

设计了基于硅基槽波导的微环谐振型单纤三向滤波器。基于电磁场理论得到了二维情形下的硅基槽波导的模场及有效折射率随波长的变化关系,在此基础上,利用硅基槽微环谐振腔谐振波长与微环半径的关系,优化得到了可将1490nm和1550nm两个下载波长分开的谐振环半径,并同时将1310nm波长上传,三个波长信号从不同端口输出,成功地实现了三向器滤波功能。利用传递函数法模拟了所设计的硅基槽微环谐振型三向滤波器的输出光谱,结果显示其串扰可低至-16.9dB。     

Generating entangled photons via enhanced spontaneous parametric downconversion in AlGaAs microring resonators

Spontaneous parametric downconversion (SPDC) can be enhanced in double-channel side-coupled microring resonator structures, generating entangled photons spatially separated in different channels. The enhancement is even more drastic in single-channel side-coupled microring resonator structures, although the generated entangled photons are not spatially separated, and it might be most interesting to use a ring tuned for nondegenerate SPDC.     

Modeling and analysis of silicon-on-insulator elliptical microring resonators for future high-density integrated photonic circuits

We propose a novel resonator containing an elliptical microring based on a silicon-on-insulator platform. Simulations using the three-dimensional finite-difference time-domain method show that the novel elliptical microring can efficiently enhance the mode coupling between straight bus waveguides and resonator waveguides or between adjacent resonators while preserving relatively high intrinsic quality factors with large free spectral range. The proposed resonator would be an alternative choice for future high-density integrated photonic circuits.