Tunable and reconfigurable microwave photonic filter based on cascaded modulation for multi-taps generation

In this paper, a theoretical analysis and experiment to obtain the tunable and reconfigurable microwave photonic filter is proposed. The sidebands generated by cascaded modulation serve as the multi-taps, and then the reconfigurability and tunability can be realized by adjusting the operating condition of intensity modulators and the optical phase shifting between modulators.     

All-optical microwave notch filter with flat passband based on semiconductor optical amplifier

An all-optical filter structure for interference mitigation of microwave signals is proposed and demonstrated. The structure is based on a recirculating delay line loop (RDLL) and a fiber Bragg grating. The RDLL is comprised of a semiconductor optical amplifier (SOA) followed by a tunable narrowband optical filter and an optical variable delay line. Negative tap is generated using wavelength conversion based on the cross-gain modulation of amplified spontaneous emission spectrum of the SOA. A negative band-pass filter and a broadband all-pass filter are synthesized to achieve a narrow notch filter with flat passband which can excise interference with minimal impact on the wanted signal over a wide microwave range. Experimental results show the notch rejection ratio of 30 dB, good shape factor and tunability.     

Microwave photonic filter with multiple taps based on single semiconductor optical amplifier

A novel technique to implement a microwave photonic filter structure with multiple taps and arbitrary frequency response is presented. The proposed filter is based on Four-Wave Mixing (FWM) and Cross-Gain Modulation (XGM) in a semiconductor optical amplifier (SOA). Two-tap notch filter and three-tap bandpass filter with arbitrary bipolar tap generation, high rejection ratio, and widely tunability are successfully demonstrated in the experiment. Extensions to this concept by adding new probe light to provide more taps and improve the bandwidth to high frequency regime are also discussed.     

基于半导体光放大器的一阶IIR微波光子学滤波器及其品质因素分析

对基于半导体光放大器(SOA)环形腔结构的一阶无限冲击响应(IIR)微波光子学滤波器的品质因数(Q值)进行了实验和理论研究. 通过在有源环内置入窄带光滤波器,并调节有源环的输入光功率、SOA抽运电流、实验得到的最高Q值接近200. 理论分析表明为了得到较高的Q值,应尽可能提高信噪比和信号光的环路增益. 在考虑了 SOA中放大的自发辐射(ASE)噪声的基础上,计算了输入光功率、SOA抽运电流、环内光滤波器的带宽对Q值的影响. 数值计算的结果与实验现象基 关键词： 微波光子学滤波器 Q值')" href="#">Q值 半导体光放大器 放大的自发辐射     

A tunable and reconfigurable microwave photonic filter based on two cascaded modulators and a dispersive medium

A novel tunable and reconfigurable microwave photonic filter based on two cascaded modulators and a dispersive medium is proposed, theoretically discussed and experimentally demonstrated. A single-wavelength LD and a modulator (either a Mach-Zehnder modulator or a phase modulator which can avoid the dc bias drift problem) are used to obtain a multi-wavelength optical source. By adjusting the modulation frequency and the bias voltage on the modulators, the wavelength spacing and the relative amplitude of the optical tones change, thus making the filter tunable and reconfigurable. The experimental results show that the proposed filters have good tunability and reconfigurability and the mainlobe-to-sidelobe ratio of around 25 dB is achieved.     

Novel tunable microwave photonic notch filter using a 3 × 3 coupler based Sagnac loop

We propose a simple and stable structure to realize a tunable negative coefficients microwave photonic notch filter. A 3 × 3 coupler based Sagnac loop interferometer with an asymmetrically placed phase modulator is used to acquire the notches. Our system is simply implemented and with good stability. Theoretical analysis and experimental results are presented and show a good agreement. The structure is proved to be a robust filter with more than 35 dB rejection deep notches.     

A tunable single-passband microwave photonic filter with positive and negative taps using a fiber Mach-Zehnder interferometer and phase modulation

In this paper, a tunable single-passband microwave photonic filter with positive and negative taps based on phase modulation and a fiber Mach-Zehnder interferometer (FMZI)) is presented, theoretically analyzed and experimentally demonstrated. The FMZI as the slicing filter results in a single-bandpass characteristic for the presented filter, and by using phase modulation, a number of negative taps are generated, thus making the baseband resonance suppressed, which is desirable for microwave photonic filter's application. The wavelength spacing of the FMZI can be tuned by employing an optical variable delay line, making the present filter continuously tunable. A tunable single-passband microwave photonic filter without baseband resonance is achieved in the experiment. The present filter shows an extinction ratio of up to ∼20 dB and good tuning linearity.     

Microwave photonic filter with a continuously tunable central frequency using an SOI high-Q microdisk resonator

Utilizing a high-Q microdisk resonator(MDR) on a single silicon-on-insulator(SOI) chip, a compact microwave photonic filter(MPF) with a continuously tunable central frequency is proposed and experimentally demonstrated. Assisted by the optical single side-band(OSSB) modulation, the optical frequency response of the MDR is mapped to the microwave frequency response to form an MPF with a continuously tunable central frequency and a narrow 3-dB bandwidth. In the experiment, using an MDR with a compact size of 20×20 μm2and a high Q factor of 1.07×105, we obtain a compact MPF with a high rejection ratio of about 40 dB, a 3-dB bandwidth of about 2 GHz, and a frequency tuning range larger than12 GHz. Our approach may allow the implementation of very compact, low-cost, low-consumption, and integrated notch MPF in a silicon chip.     

A software tool to evaluate the frequency response of a microwave photonic filter in MATLAB based on a Graphical User Interface

The aim of this paper is to describe the development and application of a software tool in MATLAB based on a Graphical User Interface that allows evaluation of the frequency response of a microwave photonic filter. Microwave photonic filters have potential applications in optical communication systems. The main characteristic of this software tool is the friendly way to edit the parameters involved to determine the frequency response. In order to validate the results obtained by the use of this software tool, a series of experiments were carried out in our laboratory and the results were compared qualitatively showing a good agreement. The developed software has a potential application as a didactic tool in a course of microwave electro-optical systems.     

A novel all optical method of implementing an n-bit wavelength encoded complete digital data comparator using nonlinear semiconductor optical amplifiers

Data comparator is the integral part of arithmetic and logical unit of any electronic or optical data processor. Due to some inherent limitations of electronics it cannot be possible to obtain a super fast operation (over terahertz limit) from electronic comparators. Again wavelength encoding technique has been established as an excellent one over other existing optical data encoding techniques. Semiconductor optical amplifier (SOA) technologies have shown their strong potentiality of realizing many all-optical systems. In this communication the authors have proposed a new scheme of developing all-optical wavelength encoded n bit binary comparator exploiting the four-wave mixing, wavelength filtering, wavelength conversion and nonlinear polarization rotation capabilities property of nonlinear semiconductor optical amplifiers. The scheme can be used for comparing signed and unsigned optical binary data of any bit wide numbers as well. The comparator is especially suitable for use as a building block in a larger optical circuit, such as in an all optical telecommunications switch.