Ammeline–melamine–formaldehyde resins. Preparation and properties

Ammeline–melamine–formaldehyde resins (AMF Resins) containing 5–100 mol % of ammeline, were synthesized by polymerization of the preformed sodium salt of ammeline, melamine, and formaldehyde in basic medium by three methods. These resins, when cured, constitute a new class of thermosets. The rate of hydroxymethylation of the amino groups of the ammeline salt with formaldehyde was somewhat larger then that of the amino groups on melamine. At higher pH values ammeline insolubility was not a problem. The AMF resin composition was approximately equal to the mol ratio of the components originally charged. Both ammeline and melamine were consumed over the entire reaction period. Thus, it is possible to make approximately uniform random ammeline-melamine-formaldehyde resins (AMF) with any mol ratio of ammeline salt to melamine. By controlling the pH of the solution from which the resins were isolated, the (SINGLE BOND) O⁻ Na⁺/(SINGLE BOND) OH ratio could be varied. Resin melting points varied widely with the mol fraction of ammeline and the (SINGLE BOND) O⁻ Na⁺/(SINGLE BOND) OH ratio. AMF resin solubilities, shelf lives, cloud points, and water tolerance depended upon the method of preparation, pH, and other factors. The sodium salt of ammeline was hydroxymethylated in water more readily than ammeline. More highly methylolated ammeline species were readily formed in solution but upon precipitation only bis-N-hydroxymethylammeline was isolated. © 1996 John Wiley & Sons, Inc.     

应用亲水作用色谱检测鸡蛋和肉中三聚氰胺及三聚氰酸二酰胺

应用亲水作用色谱(HILIC)对从市场上购买的鸡蛋和肉中的三聚氰胺及三聚氰胺降解产物三聚氰酸二酰胺进行了检测。采用的色谱柱为ZIC-HILIC柱,流动相为3 mmol/L磷酸二氢铵溶液(pH 6.9)-乙腈(20:80, v/v),流速为0.8 mL/min,检测波长为220 nm。在该体系下,三聚氰胺和三聚氰酸二酰胺的保留时间适中,与样品中的内源性物质有良好的分离。样品经0.1%磷酸提取,偏磷酸及乙腈沉淀蛋白质和糖类物质,以及P-SCX固相萃取柱净化。三聚氰胺和三聚氰酸二酰胺在0.4～40 mg/L范围内与峰面积呈良好的线性关系,样品定量限(按信噪比(S/N)不小于10计)为2 mg/kg,在2～10 mg/kg添加水平下的平均回收率为80%～105%,相对标准偏差小于10%。该方法具有良好的分离选择性,可用于鸡蛋和肉中三聚氰胺和三聚氰酸二酰胺的同时检测。     

Vibrational spectra of melamine diborate,C3N6H62H3BO3

IR and Raman spectra of melamine diborate have been recorded and analysed. Band assignments are given based on the vibrations of melamine and boric acid molecules. Three sets of frequencies observed for the N-H stretching mode region is ascribed to different types of hydrogen bonds in the amino groups of the triazine ring. Due to the lower symmetry of the melamine and boric acid molecules in the crystal, activation of inactive modes and lifting of the degeneracy of certain vibrational modes are observed. Lower symmetry of the melamine molecule in the crystal has resulted in the decrease of intensity of the Raman active melamine band around 1490 cm(-1). All the internal modes of boric acid molecule were identified. All the ring breathing modes of melamine molecule show frequency shift towards the high wavenumber side. In other words, hydrogen bonding affects the ring breathing modes of melamine.     

Fast quantitative determination of melamine and its derivatives by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

A simple, sensitive and fast method for the determination of melamine and its derivatives in milk powder using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) was developed. Neither time-consuming sample preparation, nor special target plates, or other extra equipment are necessary. The common matrix sinapinic acid (SA) was used with a dried-droplet preparation. Detection limits (signal-to-noise (S/N) ratio = 3) for standard solutions of melamine, ammeline and cyanuric acid were 10, 25 and 10 μg/L, respectively. The limit of quantification (LOQ) for melamine was 25 μg/L and excellent linearity (R(2): 0.9990) was maintained over the range of 10-2000 μg/L. Ammeline and cyanuric acid were analyzed with an LOQ of 50 μg/L and also excellent linearity (R(2): 0.9997 and R(2): 0.9998). Good accuracy and precision were obtained for all concentrations within the range of the standard curve. The developed method was successfully used for the determination of melamine, ammeline and cyanuric acid in milk powder samples with a simple sample preparation. The LOQ of melamine was 0.5 μg/g. Ammeline and cyanuric acid were detectable at 0.5 and 5 μg/g. This method showed excellent accuracy, precision and linearity and significantly reduces the needed analysis time, as only approximately 10 s/sample measuring time is required. To the authors' knowledge, this is the first published method to quantify melamine and derivatives by MALDI-TOF-MS.     

Preparation of melamine molecularly imprinted polymer by computer‐aided design

Melamine was chosen as template, methacrylic acid was chosen as functional monomer, and divinylbenzene, ethylene glycol dimethacrylate, trimethylolpropane trimethylacrylate were chosen as cross‐linking agents, respectively. The WB97XD/6‐31G(d, p) method was used to calculate the geometry optimization of the different imprinting ratios, the action sites, the bonding situation, and the optimization of the cross‐linking agents. The nature of the imprinting effect was also studied by the atoms in molecules theory. The theoretical results showed that melamine interacts with methacrylic acid by hydrogen bonding, and the melamine molecularly imprinted polymers with a molar ratio of 1:6 have the most hydrogen bonds and the most stable structure. Divinylbenzene is the best cross‐linking agent for the melamine molecularly imprinted polymers. The melamine molecularly imprinted polymers were synthesized by precipitation polymerization. The results showed that the maximum adsorption capacity for molecularly imprinted polymers towards melamine is 19.84 mg/g, and the adsorption quantity of the polymers to melamine is obviously higher than that of cyromazine, cyanuric acid, and trithiocyanuric in milk. This study could provide theoretical and experimental references for the screening of the imprinting ratio and the cross‐linking agent for the given template and monomer system.     

Supramolecular chirality of the hydrogen-bonded complex Langmuir-Blodgett film of achiral barbituric acid and melamine

Complex monolayers of barbituric acid and melamine were formed by spreading a chloroform solution of amphiphilic barbituric acid on the subphase of melamine solution. It was confirmed that the complex monolayer was formed through in situ complementary hydrogen bonding at the air-water interface. It was interesting to find that the complex LB films showed supramolecular chirality although both of the molecules were achiral, as verified by the circular dichroism spectral measurements. It was suggested that the pi-pi stacking of the neighboring barbituric acid and melamine group in a helical sense resulted in the chirality of the molecular assemblies. Due to the directionality of the hydrogen bonding, the BA-M film could form regular aligned nanofibers on the AFM images. Increasing the subphase temperature will lead to the decrease of CD intensity and the change of the morphologies. We suggested that the strength of the hydrogen bonding resulted in the difference.     

DFT Study on the Effect of Hydrogen-bond Formation on the Adsorption of Aminotriazines on Graphene

DFT calculations have been performed to explore the aminotriazine adsorption on graphene surfaces.Relative energies,equilibrium geometries and electronic structures of monomer and dimer of aminotriazine molecules adsorbed at the surface were investigated and analyzed in details.It was found that the hydrogen atoms in the NH2 group of aminotriazine molecules are directed toward the graphene surface,and the adsorption energy increases as the NH2 group is added.The adsorbed aminotriazine molecules facilely form a dimer through the hydrogen bonding interactions,and the two aromatic rings of optimized structure of 2-amino-1,3,5-triazine(B) dimmer(denoted by B2) and melamine(D) dimmer(denoted by D2) are parallel to the graphene sheet.The large deviation of the averaged adsorption energy of B2 and D2 compared to monor adsorption may reflect the increase of π-π repulsion and the effect of hydrogen bond formation.The electronic structure analyses reveal that the formation of hydrogen bonds in melamine dimer has great influence on the adsorption mode at the graphene surface.     

Quantitative Bestimmung von Melamin, Ammelin, Ammelid und Cyanurs?ure im quatern?ren Gemisch. II

Zusammenfassung Zur quantitativen Bestimmung von Melamin, Ammelin, Ammelid und CyanursÄure im quaternÄren Gemisch werden in einer Probe Melamin, Ammelin und Ammelid mit Hilfe eines Anionenaustauschers durch aufeinanderfolgende Eluierung mit Wasser, 0,5 bzw. 2 N NaOH-Lösungen getrennt und spektrophotometrisch in saurer Lösung bei 235, 230 und 215 nm bestimmt. CyanursÄure wird in einer zweiten Probe durch Zurückhalten der Cyanurbasen auf einem stark sauren Kationenaustauscher abgetrennt und als Melamincyanurat gravimetrisch bestimmt. Im Vergleich mit der früher von uns gegebenen chemischen Methode [6] ist die gegenwÄrtige vorteilhafter, da sie bei ungefÄhr gleicher Genauigkeit schneller und mit kleineren Substanzmengen zum Ziel führt.

---

Quantitative determination of melamine, ammeline, ammelide and cyanuric acid in the quaternary mixture. II

A method for the quantitative determination of melamine, ammeline, ammelide and cyanuric acid in a quaternary mixture is proposed. In one sample melamine, ammeline and ammelide are separated from an anion-exchanger by succesive elution with water, 0.5 and 2 N NaOH solutions, respectively, and are determined spectrophotometrically in an acid solution at 235 nm, 230 nm and 215 nm. In a second sample, cyanuric acid is separated on a strongly acid cation-exchanger by retaining the cyanuric bases and is determined gravimetrically as melamine cyanurate. In comparison with the chemical method previously proposed [6] the present one is more advantageous since it offers the same accuracy, yet more rapidly, and requiring smaller samples.

---

---

I. Mitteilung: G. Ostrogovich u. R. Bacaloglu [6].     

Simultaneous determination of cyromazine,melamine and their biodegradation products by ion-pair high-performance liquid chromatography

An ion-pair high-performance liquid chromatography with ultraviolet detection method for the determination of cyromazine, melamine and its biodegradation products (ammeline, ammelide, cyanuric acid and biuret) was developed. C18 column was utilised to separate the six analytes with a mobile phase consisting of perchloric acid-ammonia solution and acetonitrile, under gradient elution and variable flow rate. The detection wavelengths were 205 nm for cyanuric acid and biuret and 222 nm for cyromazine, melamine, ammeline and ammelide. For analysis of sediment samples, the extraction solution containing acetonitrile, ammonia and water (80:10:10 by volume) was used to extract the analytes from sediment matrix. Using the extraction method for the spiked sediment sample, high linearity of matrix-matched standard curve could be obtained for the six analytes. The method detection limit was 0.1 μg g^?1 for melamine and cyromazine, 0.2 μg g^?1 for ammeline and ammelide, 1.2 μg g^?1 for cyanuric acid and 1.0 μg g^?1 for biuret in sediment matrix. The recoveries of these compounds were 70.1–98.3% and the relative standard deviations were 0.5–4.4%. Finally, the proposed method was successfully applied to the analysis of the sediment sample near the wastewater outlet of a melamine-producing factory.     

Hierarchical organization of a robust porphyrin cage self-assembled by hydrogen bonds

Porphyrins appended with four rigid hydrogen bonding motifs on the meso positions were synthesized and self-assembled into a cofacial cage with four complementary bis(decyl)melamine units in dry solvents. The hydrocarbon chains on the melamine mediate the formation of nanofilms on surfaces as the solvent slowly evaporates.     

Development of a high performance liquid chromatography method and a liquid chromatography-tandem mass spectrometry method with pressurized liquid extraction for simultaneous quantification and confirmation of cyromazine, melamine and its metabolites in foods of animal origin

Simple and sensitive methods have been developed for simultaneous detection of cyromazine, melamine and their metabolites (ammeline, ammelide and cyanuric acid) in samples of animal origins. These include a high performance liquid chromatography (HPLC) method and a liquid chromatography-tandem mass spectrometry (LC-MS/MS) method and are useful in regular monitoring and in toxicity studies of these molecules. Representative samples used in this study include muscles and livers of swine, bovine, sheep and chicken, kidneys of swine, bovine and sheep, and milk powder. A new sample preparation procedure with pressurized liquid extraction (PLE) at 1400psi and 70°C was investigated. Quantification of these five compounds by HPLC was achieved using an APS-2 column with UV detection at 230 nm. Limit of detection (LOD) was at 10 μgkg(-1), and limit of quantification (LOQ) was at 40 μgkg(-1). Recoveries of the five analytes in spiked samples ranged from 72.2% to 115.4% with RSD less than 12%. Confirmatory analysis of the analytes was performed using LC-MS/MS in selected reaction monitoring (SRM) mode. The LOD and LOQ were 5 μgkg(-1) and 15 μgkg(-1), respectively. This is the first simultaneous analysis of cyromazine, melamine, ammeline, ammelide and cyanuric acid residues in complex tissue samples using PLE and HPLC. It is expected that these methods will find many practical applications in evaluating the safety of cyromazine, melamine and their metabolites.     

Self-assembly and molecular recognition of adenine- and thymine-functionalized nucleolipids in the mixed monolayers and thymine-functionalized nucleolipids on aqueous melamine at the air-water interface

Self-assembly and molecular recognition of the monolayers composed of an equimolar mixture of adenine- and thymine-functionalized nucleolipids at the air-water interface have been investigated in detail using surface pressure-molecular area isotherms and in situ infrared reflection absorption spectroscopy (IRRAS). Prior to molecular recognition, the adenine moieties in the monolayer were almost oriented on an end-on mode through π-stacking and hydrogen bonding interactions, and the C-C-C planes of the alkyl chains were preferentially oriented perpendicular to the water surface, while the thymine moieties in the monolayer were involved in hydrogen bonding almost with a flat-on orientation. On aqueous subphases containing complementary bases, no significant molecular recognition was observed for the monolayers of individual nucleolipids. In the monolayer of equimolar mixture, molecular recognition occurred between the adenine and thymine moieties through hydrogen bonding probably with the development of cyclic structures of adenine-thymine-adenine-thymine quartets. Although molecular recognition between the monolayer of thymine-functionalized nucleolipids and aqueous melamine took place through triple hydrogen bonds, no melamine binding to the monolayer of equimolar mixture was observed, which reflects the formation of the quartets in the mixed monolayers at the air-water interface. FTIR and small-angle X-ray diffraction (XRD) results of the corresponding Langmuir-Blodgett films support the hydrogen bonding recognition and molecular orientation.     

Two-dimensional self-assembled structures of melamine and melem at the aqueous solution-Au(111) interface

Self-assembled structures of melamine and the condensed melamine derivative melem were investigated at aqueous solution-Au(111) interfaces by cyclic voltammetry and in situ scanning tunneling microscopy (STM) observation. The adsorption/desorption behaviors of both molecules on Au(111) surfaces could be controlled by varying the electrochemical potential and solution concentration. In the negative potential region, self-assembled structures of melem and melamine were constructed by double hydrogen bonding systems between nitrogen atoms of triazine rings and amine groups. In addition, melem formed a closely packed structure at potentials of between -0.3 and -0.15 V or in solutions at higher concentrations.     

Hydrogen-bonded PTCDA-melamine networks and mixed phases

A stable hydrogen-bonding junction is formed between 3,4,9,10-perylene-3,4,9,10-tetracarboxylic-dianhydride (PTCDA) and 1,3,5-triazine-2,4,6-triamine (melamine). This bimolecular system was studied on the Ag-Si(111) square root 3 x square root R 30 degrees surface at sub-monolayer coverage, and two distinct phases are observed. A hexagonal lattice is formed that is stabilized by hydrogen bonding between PTCDA and melamine. This phase, in which melamine acts as a 3-fold vertex, is a close analogue to the 3,4,9,10-perylene-3,4,9,10-tetracarboxylic-diimide-melamine network reported recently. To our knowledge this hydrogen-bonding junction has not been previously observed and might not be expected due to lone pair repulsion. However we confirm that this combination is stable using ab initio methods. In the second intermixed phase parallel rows of PTCDA molecules coexist with an array of melamine molecules, and we propose a model for this structure.     

Visual detection of melamine in milk samples based on label-free and labeled gold nanoparticles

Melamine that can cause serious damage to the organs of animal or human beings was found to bind to polythymine via hydrogen bonding. With this novel discovery, colorimetric detection of melamine based on label-free and labeled gold nanoparticles was developed, respectively. Both of the methods revealed good selectivity for melamine over other components that may exist in milk and good anti-influence ability. The raw milk samples were pretreated according to the National standard method combined with a solid phase extraction monolithic column. The accurate quantification of melamine as low as 41.7 nM and 46.5 nM was obtained, respectively. It also guarantees fast and reliable readout with naked eyes, making visual detection possible. Further comparison between label-free and labeled based methods was discussed in this paper.     

Tailoring the Self-assembly of Melamine on Au (111) via Doping with Cu Atoms

The doping effect of Cu on the self-assembly film of melamine on an Au(111) surface has been investigated with scanning tunneling microscopy (STM). The evaporated Cu adatoms occupy the positions underneath the amino groups and change the hydrogen bonding pattern between the melamine molecules. Accordingly, the self-assembly structure has changed stepwise from a well-defined honeycomb into a track-like and then a triangular structure depending on the amount of Cu adatoms. The interaction between Cu adatom and melamine is moderate thus the Cu adatoms can be released upon mild heating to around 100℃. These findings are different from previous observations of either the coordination assembly or the physically trapped metal adatoms.     

Rational Design of Nanofibers and Nanorings through Complementary Hydrogen‐Bonding Interactions of Functional π Systems

A simple protocol to create nanofibers and ‐rings through a rational self‐assembly approach is described. Whereas the melamine–oligo(p‐phenylenevinylene) conjugate 1 a self‐aggregates to form ill‐defined nanostructures, conjugate 1 b , which possesses an amide group as an additional interactive site, self‐aggregates to form 1D nanofibers that induce gelation of the solvent. AFM and XRD studies have shown that dimerization through the melamine–melamine hydrogen‐bonding interaction occurs only for 1 b . Upon complexation with 1/3 equivalents of cyanuric acid (CA), conjugate 1 a provides well‐defined, ring‐shaped nanostructures at micromolar concentrations, which open to form fibrous assemblies at submillimolar concentrations and organogels in the millimolar concentration range. Apparently, the enhanced aggregation ability of 1 a by CA is a consequence of columnar organization of the resulting discotic complex 1 a ₃ ? CA. In contrast, coaggregation of 1 b with CA does not provide well‐defined nanostructures, probably due to the interference of complementary hydrogen‐bonding interactions by the amide group.     

亲水色谱-串联质谱法对牛奶与奶粉中三聚氰胺及其衍生物含量的测定

建立了牛奶和奶粉中三聚氰胺及其3种衍生物（三聚氰酸、三聚氰酸一酰胺、三聚氰酸二酰胺）的亲水色谱-串联质谱检测方法（HILIC-MS/MS）。牛奶样品直接用乙腈超声波提取;奶粉样品先用水溶解后再加乙腈超声波提取,高速离心后以乙腈-水为流动相,采用亲水作用色谱柱分离这4种化合物,在电喷雾正、负电离切换多反应监测模式下进行定性与定量分析,三聚氰酸一酰胺与三聚氰酸二酰胺含量在50～10000μg/kg之间、三聚氰胺与三聚氰酸在25～5000μg/kg之间,均获得良好的线性。方法检出限（LOD）为5～20μg/kg,定量下限（LOQ）为50～100μg/kg,3个添加水平的平均回收率为81%～97%。该方法简便、快速、准确,可满足牛奶及奶粉中三聚氰胺、三聚氰酸、三聚氰酸一酰胺、三聚氰酸二酰胺测定的需要。     

Proton-driven conformational change in a 2-aryl-p-carborane constrained by an intramolecular C-H?O hydrogen bond

2-(2-Hydroxyphenyl)-p-carborane forms an intramolecular hydrogen bonding based on the results of X-ray, IR, and ¹H NMR studies. The hydrogen bonding is released by the addition of acid in solution. Density functional theory (DFT) calculations on the phenol, phenolate and protonated phenol structures indicated two stable conformational state, hydrogen bonding form for phenol and phenolate, and dihydrogen bonding form for protonated phenol.     

Telomere structure and stability: covalency in hydrogen bonds, not resonance assistance, causes cooperativity in guanine quartets

We show that the cooperative reinforcement between hydrogen bonds in guanine quartets is not caused by resonance-assisted hydrogen bonding (RAHB). This follows from extensive computational analyses of guanine quartets (G(4)) and xanthine quartets (X(4)) based on dispersion-corrected density functional theory (DFT-D). Our investigations cover the situation of quartets in the gas phase, in aqueous solution as well as in telomere-like stacks. A new mechanism for cooperativity between hydrogen bonds in guanine quartets emerges from our quantitative Kohn-Sham molecular orbital (MO) and corresponding energy decomposition analyses (EDA). Our analyses reveal that the intriguing cooperativity originates from the charge separation that goes with donor-acceptor orbital interactions in the σ-electron system, and not from the strengthening caused by resonance in the π-electron system. The cooperativity mechanism proposed here is argued to apply, beyond the present model systems, also to other hydrogen bonds that show cooperativity effects.