Van Der Waals heterogeneous layer‐layer carbon nanostructures involving π···H‐C‐C‐H···π···H‐C‐C‐H stacking based on graphene and graphane sheets

Noncovalent interactions involving aromatic rings, such as π···π stacking, CH···π are very essential for supramolecular carbon nanostructures. Graphite is a typical homogenous carbon matter based on π···π stacking of graphene sheets. Even in systems not involving aromatic groups, the stability of diamondoid dimer and layer‐layer graphane dimer originates from C − H···H − C noncovalent interaction. In this article, the structures and properties of novel heterogeneous layer‐layer carbon‐nanostructures involving π···H‐C‐C‐H···π···H‐C‐C‐H stacking based on [n ]‐graphane and [n ]‐graphene and their derivatives are theoretically investigated for n = 16–54 using dispersion corrected density functional theory B3LYP‐D3 method. Energy decomposition analysis shows that dispersion interaction is the most important for the stabilization of both double‐ and multi‐layer‐layer [n ]‐graphane@graphene. Binding energy between graphane and graphene sheets shows that there is a distinct additive nature of CH···π interaction. For comparison and simplicity, the concept of H‐H bond energy equivalent number of carbon atoms (noted as NHEQ), is used to describe the strength of these noncovalent interactions. The NHEQ of the graphene dimers, graphane dimers, and double‐layered graphane@graphene are 103, 143, and 110, indicating that the strength of C‐H···π interaction is close to that of π···π and much stronger than that of C‐H···H‐C in large size systems. Additionally, frontier molecular orbital, electron density difference and visualized noncovalent interaction regions are discussed for deeply understanding the nature of the C‐H···π stacking interaction in construction of heterogeneous layer‐layer graphane@graphene structures. We hope that the present study would be helpful for creations of new functional supramolecular materials based on graphane and graphene carbon nano‐structures. © 2017 Wiley Periodicals, Inc.     

Conducting π Columns of Highly Symmetric Coronene,The Smallest Fragment of Graphene

Coronene, which is the smallest D_6h‐symmetric polycyclic aromatic hydrocarbon, attracts particular attention as a basic component of electronic materials because it is the smallest fragment of graphene. However, carrier generation by physical methods, such as photo‐ or electric field‐effect, has barely been studied, primarily because of the poor π‐conduction pathway in pristine coronene solid. In this work we have developed unprecedented π‐stacking columns of cationic coronene molecules by electrochemical hole‐doping with polyoxometallate dianions. The face‐to‐face π–π interactions as well as the partially charged state lead to electrical conductivity at room temperature of up to 3 S cm^?1, which is more than 10 orders of magnitude higher than that of pristine coronene solid. Additionally, the robust π–π interactions strongly suppress the in‐plane rotation of the coronene molecules, which has allowed the first direct observation of the static Jahn–Teller distortion of cationic coronene molecules.     

Synthesis of Ultrastable Ag Nanoplates/Polyethylenimine–Reduced Graphene Oxide and Its Application as a Versatile Electrochemical Sensor

Investigations on Ag nanostructures/reduced graphene oxide composites have been frequently reported, yet the morphology control of those loaded Ag nanocrystals is still challenging. We herein develop a facile method to grow triangular Ag nanoplates (AgP) on polyethylenimine‐modified reduced graphene oxide (AgP/PEI‐rGO). The AgP/PEI‐rGO hybrids show unexpected high stability against chloride ions (Cl^?) and hydrogen peroxide (H₂O₂), which is possibly due to the strong interaction between surface Ag atoms with the amine groups of PEI. In the chronoamperometry measurements for detecting H₂O₂, N₂H₄, and NaNO₂, the AgP/PEI‐rGO hybrid shows very wide linear ranges (usually 10^?6–10^?2 mol L^?1 for H₂O₂, N₂H₄, and NaNO₂) and low detection limits (down to ≈1×10^?7 mol L^?1), which demonstrate the promising electrochemical sensor applications of these metal/graphene hybrids with well‐defined morphologies and facets. In addition, this strategy could be extended to the deposition of other noble metals on rGO with controlled morphologies.     

Review: Graphene-supported coordination complexes and organometallics: properties and applications

Recent advances in the functionalization of graphene (G) and graphene oxide (GO) using classical coordination complexes, as well as σ- and π-organometallic compounds as precursors, are discussed. Graphene can form hybrids via covalent or non-covalent interactions with metal complexes of carboxylates, amines, polypyridine compounds, a host of N,O-containing ligands, porphyrins, phthalocyanines, carbonyls, cyclopentadienyls, pyrene-containing moieties, and other aromatic structures. The hybrid constructs are interesting for applications in catalysis, energy storage, and corrosion inhibition and present interesting possibilities of modulating the electronic structure of graphene.     

Synergistically Directed Assembly of Aromatic Stacks Based Metal‐Organic Frameworks by Donor‐Acceptor and Coordination Interactions

A synergistically directed assembly approach to distinctive metal‐organic frameworks utilizing both donor‐acceptor (D‐A) interaction from aromatic systems and coordination interactions is presented. Based on such an approach, the coronene‐tpt (tpt = 2,4,6‐tri(4‐pyridyl)‐1,3,5‐triazine) stacks based coronene‐MOF‐1 — 4 have been successfully fabricated. Their structural discrepancies with coronene‐ absent control products, 1′ — 4′ , illustrate clearly the significance of coronene‐tpt based D‐A interactions in these architectures. All these coronene‐MOFs contain varied coronene‐tpt stacks as organic secondary building blocks (SBUs), which are closely interrelated with the coordination based framework structures. Moreover, porous coronene‐MOF‐1 and ‐2 exhibit high physicochemical stability and significant light hydrocarbons storage and separation performances.     

Synthesis of Robust MOFs@COFs Porous Hybrid Materials via an Aza-Diels–Alder Reaction: Towards High-Performance Supercapacitor Materials

Metal–organic frameworks (MOFs) and covalent organic frameworks (COFs) have attracted enormous attention in recent years. Recently, MOF@COF are emerging as hybrid architectures combining the unique features of the individual components to enable the generation of materials displaying novel physicochemical properties. Herein we report an unprecedented use of aza-Diels–Alder cycloaddition reaction as post-synthetic modification of MOF@COF-LZU1, to generate aza-MOFs@COFs hybrid porous materials with extended π-delocalization. A a proof-of-concept, the obtained aza-MOFs@COFs is used as electrode in supercapacitors displaying specific capacitance of 20.35 μF cm⁻² and high volumetric energy density of 1.16 F cm⁻³. Our approach of post-synthetic modification of MOFs@COFs hybrids implement rational design for the synthesis of functional porous materials and expands the plethora of promising application of MOFs@COFs hybrid porous materials in energy storage applications.     

Recent advances of hexaazatriphenylene (HAT) derivatives: Their applications in self-assembly and porous organic materials

As a rigid and planar aza-based heteroaromatic scaffold, hexaazatriphenylene (HAT) exhibits excellent electron-deficient property and high π-π stacking tendency, which makes it an ideal building block in the construction of supramolecular architectures and functional materials. In addition, HATs have also been picked out as building blocks for the construction of novel porous organic polymers, one of the most attractive fields of porous materials in the past decade, which includes intrinsic microporosity (PIMs), π-conjugated microporous polymers (CMPs), and covalent organic frameworks (COFs). In this digest paper, the synthetic methods of HAT derivatives have been briefly introduced and some recent advances of HATs in the applications of supramolecular self-assembly and porous organic materials have been highlighted.     

Porous graphene oxide-based carbon artefact with high capacity for methylene blue adsorption

A three-dimensional porous graphene oxide (PGO) material prepared by hydrothermal method was selected to adsorb methylene blue (MB), which demonstrates a high MB adsorption capacity, up to 1100 mg g^?1 in alkaline solution at room temperature. The influences of different pore structures and different contents of oxygen-containing functional groups on MB adsorption behaviors were studied in detail, which indicated that the high MB adsorption capacity is mainly ascribed to the synergistic effect of the large number of oxygen-containing functional groups and the interconnected 3D porous network. Moreover, based on the investigation on the adsorption kinetics and the effect of pH value on MB adsorption, we propose a two-step adsorption kinetics for PGO, which involved in two interactions between MB molecular and porous graphene oxide-based carbon: electrostatic force and π-π stacking. Besides, the calculation of the activation energies indicates that chemisorption dominates the adsorption for PGO in comparison with physisorption for three-dimensional porous graphene materials which has low adsorption capacity because of the removal of functional groups. The results are of great significance for the design and environmental applications of PGO as a promising adsorbent material for water purification.     

Efficient Degradation of Cellulose in Its Homogeneously Aqueous Solution over 3D Metal-Organic Framework/Graphene Hydrogel Catalyst

Catalytic degradation of cellulose to chemicals is an attracting topic today for the conversion of biomass, and the development of novel catalysts is a key point. Since metal-organic frameworks (MOFs) possess uniform, continuous, and permeable channels, they are valuable candidate as catalysts. Here, a new 3D MOF/graphene catalyst was prepared by in situ growth of the zeolitic imidazolate frameworks (ZIF-8) nanoparticles inside the pore of an as-formed 3D reduced graphene oxide (rGO) hydrogel. The ZIF-8/rGO nanocomposite owns both micropores and mesopores with large specific surface area and plenty of acids sites, which is an idea catalyst for biomass degradation. Cellulose was dissolved in alkaline aqueous solution at first, and then it was degraded efficiently over the new catalyst under hydrothermal condition. The conversion reaches 100% while the main products are formic acid with a maximum yield of 93.66%. In addition, the catalyst can be reused with high activity.     

In Situ Synthesis of CoCeSx Bimetallic Sulfide Nanoparticles on a Bi-Pyrene Terminated Molecular Wire Modified Graphene Surface for Supercapacitors

The excellent electrical conductivity of graphene is due to its highly-conjugated structures. Manipulation of the electronic and mechanical properties of graphene can be achieved by controlling the destruction of its in-sheet conjugation system. Herein, we report the preparation of CoCeS_x−SA@BPMW@RGO through π-π stacking interactions at the molecular level. In this study, sodium alginate was reacted with Co²⁺ and Ce³⁺, and the composite was loaded onto a graphene surface. The graphene sheets were prepared using a bi-pyrene terminated molecular wire (BPMW) to avoid re-stacking of the grapheme sheets, thereby forming nanoscale spaces between sheets. The angle between the BPMW coplanar pyrene group and the phenyl group was 33.2°, and the graphene layer is supported in an oblique direction. Finally, a three-dimensional porous composite was obtained after annealing and vulcanization. The obtained CoCeS_x−SA@BPMW@RGO exhibited excellent electrical conductivity and remarkable cycle stability. When the current density was 1 A g⁻¹, its specific capacitance was as high as 1004 F g⁻¹. BPMW modifies graphene through the synergistic effect of π-π stacking interaction and special structure to obtain excellent electrochemical performance. Moreover, a solid-state asymmetric supercapacitor device was fabricated based on the synthesized CoCeS_x−SA@BPMW@RGO hybrid, which exhibited a power density of 979 W kg⁻¹ at an energy density of 23.96 Wh kg⁻¹.     

Coronene Encapsulation in Single‐Walled Carbon Nanotubes: Stacked Columns,Peapods, and Nanoribbons

Encapsulation of coronene inside single‐walled carbon nanotubes (SWNTs) was studied under various conditions. Under high vacuum, two main types of molecular encapsulation were observed by using transmission electron microscopy: coronene dimers and molecular stacking columns perpendicular or tilted (45–60°) with regard to the axis of the SWNTs. A relatively small number of short nanoribbons or polymerized coronene molecular chains were observed. However, experiments performed under an argon atmosphere (0.17 MPa) revealed reactions between the coronene molecules and the formation of hydrogen‐terminated graphene nanoribbons. It was also observed that the morphology of the encapsulated products depend on the diameter of the SWNTs. The experimental results are explained by using density functional theory calculations through the energies of the coronene molecules inside the SWNTs, which depend on the orientation of the molecules and the diameter of the tubes.     

Core–Shell LiFePO4/Carbon‐Coated Reduced Graphene Oxide Hybrids for High‐Power Lithium‐Ion Battery Cathodes

Core‐shell carbon‐coated LiFePO₄ nanoparticles were hybridized with reduced graphene (rGO) for high‐power lithium‐ion battery cathodes. Spontaneous aggregation of hydrophobic graphene in aqueous solutions during the formation of composite materials was precluded by employing hydrophilic graphene oxide (GO) as starting templates. The fabrication of true nanoscale carbon‐coated LiFePO₄‐rGO (LFP/C‐rGO) hybrids were ascribed to three factors: 1) In‐situ polymerization of polypyrrole for constrained nanoparticle synthesis of LiFePO₄, 2) enhanced dispersion of conducting 2D networks endowed by colloidal stability of GO, and 3) intimate contact between active materials and rGO. The importance of conducting template dispersion was demonstrated by contrasting LFP/C‐rGO hybrids with LFP/C‐rGO composites in which agglomerated rGO solution was used as the starting templates. The fabricated hybrid cathodes showed superior rate capability and cyclability with rates from 0.1 to 60 C. This study demonstrated the synergistic combination of nanosizing with efficient conducting templates to afford facile Li⁺ ion and electron transport for high power applications.     

Liquid Organic Frameworks: A Liquid Crystalline 8-Connected Network with Body-Centered Cubic Symmetry

Liquid state self-assembly is important for the understanding of the complex structures developed in abiogenesis and biogenesis as well as for numerous potential technological applications. Herein we report the first body-centered cubic liquid crystalline phase with 8-connected network topology and open octahedral network structure. It is formed by dynamic soft self-assembly of X-shaped polyphiles with oligo(para-phenylene-ethynylene) cores. The π-conjugated rods with perfluorinated inner benzene rings form networks conjoined by eight-way junctions, which are formed by nano-segregated spheres involving hydrogen-bonded polar end groups, while the branched aliphatic chains at opposite sides of the cores fill the continuum. This novel cubic phase is based on the I-WP minimal surface separating the frameworks of polyaromatic cores from the most disordered chain segments. It can also be considered as a dense sphere packing. Such liquid organic frameworks, representing hybrids of sphere packings and networks could be of interest for organic photonics and other technologies.     

Facile and controllable one-step fabrication of molecularly imprinted polymer membrane by magnetic field directed self-assembly for electrochemical sensing of glutathione

Based on magnetic field directed self-assembly (MDSA) of the ternary Fe₃O₄@PANI/rGO nanocomposites, a facile and controllable molecularly imprinted electrochemical sensor (MIES) was fabricated through a one-step approach for detection of glutathione (GSH). The ternary Fe₃O₄@PANI/rGO nanocomposites were obtained by chemical oxidative polymerization and intercalation of Fe₃O₄@PANI into the graphene oxide layers via π–π stacking interaction, followed by reduction of graphene oxide in the presence of hydrazine hydrate. In molecular imprinting process, the pre-polymers, including GSH as template molecule, Fe₃O₄@PANI/rGO nanocomposites as functional monomers and pyrrole as both cross-linker and co-monomer, was assembled through N–H hydrogen bonds and the electrostatic interaction, and then was rapidly oriented onto the surface of MGCE under the magnetic field induction. Subsequently, the electrochemical GSH sensor was formed by electropolymerization. In this work, the ternary Fe₃O₄@PANI/rGO nanocomposites could not only provide available functionalized sites in the matrix to form hydrogen bond and electrostatic interaction with GSH, but also afford a promoting network for electron transfer. Moreover, the biomimetic sensing membrane could be controlled more conveniently and effectively by adjusting the magnetic field strength. The as-prepared controllable sensor showed good stability and reproducibility for the determination of GSH with the detection limit reaching 3 nmol L⁻¹ (S/N = 3). In addition, the highly sensitive and selective biomimetic sensor has been successfully used for the clinical determination of GSH in biological samples.     

A high performance solid-state asymmetric supercapacitor based on Anderson-type polyoxometalate-doped graphene aerogel

The manufacture of single-atom transition metal-doping carbon nanocomposites as electrode materials is crucial for electrochemical energy storage with high energy and power density. However, the simple strategy for preparation of such active materials with controlled structure remains a great challenge. Here, cobalt-doped carbon nanocomposites (Co-POM/rGO) were synthesized successfully by deposition of Anderson-type polyoxometalate (POM) on the surface of reduced graphene oxide (rGO) aerogel via one-pot hydrothermal treatment. The resulting Co-POM/rGO possesses three-dimensional graphene-based frameworks with hierarchical porous structure, high surface area and uniform single-atom metal doping. These intriguing features render Co-POM/rGO to be a promising electrode for applications in electrochemical energy storage. As an electrode material of a supercapacitor, Co-POM/rGO shows high-performance electrochemical energy storage (211.3 F g^?1 at 0.5 A g^?1). Furthermore, the solid-state asymmetric supercapacitor (ASC) device, using Co-POM/rGO as a positive electrode, exhibits the outstanding energy density of 37.6 Wh kg^?1 at a power density of 500 W kg^?1, and high capacitance retention of 95.2% after 5000 charge–discharge cycles. These results indicate that the proposed strategy for rational design of single-atom-metal doped carbon nanocomposites for flexible ASC devices with excellent capacitive properties.

     

Fluorescent assay for oxytetracycline based on a long-chain aptamer assembled onto reduced graphene oxide

We report on a fluorescent assay for oxytetracycline (OTC) using a fluorescein-labeled long-chain aptamer assembled onto reduced graphene oxide (rGO). The π-π stacking interaction between aptamer and rGO causes the fluorescence of the label to be almost completely quenched via energy transfer so that the system has very low background fluorescence. The addition of OTC leads to the formation of G-quadruplex OTC complexes and prevents the adsorption of labeled aptamer on the surface of rGO. As a result, fluorescence is restored, and this effect allows for a quantitative assay of OTC over the 0.1–2 μM concentration range and with a detection limit of 10 nM. This method is simple, rapid, selective and sensitive. It may be applied to other small molecule analytes by applying appropriate aptamers.

Impact of the Chirality and Curvature of Carbon Nanostructures on Their Interaction with Aromatics and Amino Acids

Understanding noncovalent interactions on the surfaces of carbon nanostructures (CNSs) is of fundamental importance and also has implications in nano‐ and biotechnology. The interactions of aromatic compounds such as benzene, naphthalene, and aromatic amino acids with CNSs of varying diameter, chirality, and curvature were systematically explored by using density functional theory. Planar graphene exhibits stronger binding affinity than curved carbon nanotubes (CNTs), whereas zigzag CNTs appear to show stronger binding affinity than armchair CNTs. For hydrocarbons, there exist two competing modes, namely, π–π stacking interactions and CH ??? π interactions, which bring the aromatic motifs into parallel and perpendicular dispositions with respect to the CNSs, respectively. Our results reveal that π–π stacking interactions override CH ??? π interactions in such cases. However, in the case of aromatic amino acids, π–π interactions can exist simultaneously along with a range of other interactions, including CH ??? π. The polarizability and HOMO energy of the CNSs were found to be the key factors that determine the binding energies. The HOMO–LUMO energy gaps of the CNSs were found to be undisturbed by the noncovalent functionalization of the aromatic molecules.     

Complexes of aryl-substituted porphyrins and naphthalenediimide (NDI): investigations by synchrotron X-ray diffraction and NMR spectroscopy

New donor-acceptor hybrids of Zn(II)-metallated 5,15-diaryl porphyrins have been designed and synthesised via the porphyrin interactions with an electron acceptor molecule, di-n-hexyl N-substituted 1,2,4,8-naphthalenetetracarboxylic diimide (NDI). Binding interactions within these supramolecular complexes were investigated in the solid state by synchrotron X-ray diffraction and probed in solution by (1)H NMR spectroscopy. The systematic modulation of the porphyrin π-density was achieved, for the first time as multiple methoxy and fluorine groups were introduced as substituents to the 5,15-diaryls of the porphyrin. For these, the variation of the porphyrin-NDI binding strengths determined by (1)H NMR titrations was shown, using the Swain's type dual parameter approach, to be closely linked with the peripheral substitution pattern of the diaryl porphyrins validated by crystallography. The new 1:1 donor-acceptor complexes formed display characteristic features of the aromatic-stacked systems, i.e. the parallel arrangement and short interplanar separation between the substituted porphyrin and NDI. Synthetic modification of electron-density on the porphyrin surface by introducing substituents at peripheral sites of functionalised porphyrins represent a general solution towards electronically tunable aromatic surfaces: an understanding of their solution and solid state behaviour will significantly improve the rational design of new functional donor-acceptor supramolecular materials with potential applications ranging from new energy materials to dye-sensitised solar cells, photovoltaics and future drug delivery devices.     

Asymmetric Epoxidation of Terminal Olefins with Binaphthyl Strapped Porphyrin Catalysts: (‐( Stacking Interaction and Steric Effects on the Enantioselectivities

将两种具有相似手性联萘空腔的手性卟啉1b和2b作为催化剂,对苯乙烯衍生物及非芳香烯烃底物进行了催化不对称环氧化反应。应用理论计算方法研究了底物同两种催化剂之间的作用机理;应用1H NMR探讨了催化剂的手性空腔结构;结果表明芳香烯烃同催化剂的手性联萘基团之间的p-p相互作用是决定该类催化剂对映选择性的重要因素,同时催化剂手性结构的立体位阻效应使该类催化剂具有良好的ee值。     

Evidence for Electron Transfer between Graphene and Non-Covalently Bound π-Systems

Hybridizing graphene and molecules possess a high potential for developing materials for new applications. However, new methods to characterize such hybrids must be developed. Herein, the wet-chemical non-covalent functionalization of graphene with cationic π-systems is presented and the interaction between graphene and the molecules is characterized in detail. A series of tricationic benzimidazolium salts with various steric demand and counterions was synthesized, characterized and used for the fabrication of graphene hybrids. Subsequently, the doping effects were studied. The molecules are adsorbed onto graphene and studied by Raman spectroscopy, XPS as well as ToF-SIMS. The charged π-systems show a p-doping effect on the underlying graphene. Consequently, the tricationic molecules are reduced through a partial electron transfer process from graphene, a process which is accompanied by the loss of counterions. DFT calculations support this hypothesis and the strong p-doping could be confirmed in fabricated monolayer graphene/hybrid FET devices. The results are the basis to develop sensor applications, which are based on analyte/molecule interactions and effects on doping.