Evaluation of the catocene/graphene oxide nanocomposite catalytic activity on ammonium perchlorate thermal decomposition

A novel nanocomposite catalyst for thermal degradation of the ammonium perchlorate (AP) has been synthesized, and its effect on the thermal behavior of AP has been investigated. Preparation of the catalyst was carried out via functionalization of the graphene oxide with phenyl isocyanate and its noncovalent bonding to catocene. The catalytic activity of the catalyst was studied by thermal gravimetric analysis/differential scanning calorimetry at various heating rates. In addition, the effect of the catalyst on the AP thermal decomposition has been investigated by Kissinger and Friedman methods as two model-free methods for calculation of the activation energy parameter. According to the Kissinger method calculations, the E_a of AP decomposition reduced about 151 kJ⋅mol⁻¹ lower than the reported value for pure AP in the presence of the catalyst. Calculation of the E_a value for various reaction conversion rates by the Friedman method also confirmed the Kissinger method results.     

The use of the IKP method for evaluating the kinetic parameters and the conversion function of the thermal decomposition of NaHCO3 from nonisothermal thermogravimetric data

Three linear isoconversional methods (Friedman, Flynn–Wall–Ozawa, and Kissinger–Akahira–Sunose) and the invariant kinetic parameters (IKP) method were used in order to examine the kinetics of the nonisothermal decomposition of a sodium bicarbonate (NaHCO₃). The objective of the paper is to show the usefulness of the IKP method to determine both the kinetic parameters and the kinetic model of the investigated process. The activation energy (E_a) value obtained by the IKP method is in good agreement with the values obtained by isoconversional methods. The IKP method associated with the criterion of coincidence of kinetic parameters for all heating rates led us to the following kinetic triplet: E_a = 95.5 kJ mol^?1, A = 2.65 × 10¹⁰ min^?1, and conversion function f(α) = (1 ? α) (first‐order reaction model, F1). © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 462–471, 2007     

Thermoanalytical and NMR investigation of NaBH<Subscript>4</Subscript> × 2H<Subscript>2</Subscript>O thermolysis process

This paper describes the thermal investigations and kinetic analysis regarding the solid-state degradation of three compounds used as mental disorder therapeutic agents (antidepressants), namely amitriptyline, desipramine and imipramine. The study was carried according to ICTAC 2000 recommendations, by using three isoconversional methods, namely Flynn–Wall–Ozawa, Kissinger–Akahira–Sunose and Friedman. The differential method of Friedman indicated multistep degradation, which was later confirmed by the nonparametric kinetic method (NPK). NPK method showed that all three tricyclic antidepressants are degraded by two processes. In terms of apparent activation energies for decomposition, the NPK method indicated 123.4 kJ mol^?1 for imipramine, 112.3 kJ mol^?1 for desipramine and 82.9 kJ mol^?1 for amitriptyline, and the results are in good agreement with the ones suggested by isoconversional methods.     

Thermal decomposition kinetics of potassium iodate

The effect of gamma ray irradiation on the rate and kinetics of thermal decomposition of potassium iodate (KIO₃) has been studied by thermogravimetry (TG) under non-isothermal conditions at different heating rates (3, 5, 7, and 10 K min^?1). The thermal decomposition data were analyzed using isoconversional methods of Flynn–Wall–Ozawa, Kissinger–Akahira–Sunose, and Friedman. Irradiation with gamma rays increases the rate of the decomposition and is dependent on the irradiation dose. The activation energy decreases on irradiation. The enhancement of the rate of the thermal decomposition of KIO₃ upon irradiation is due to the combined effect of the production of displacements and extended lattice defects and chemical damage in KIO₃. Non-isothermal model fitting method of analysis showed that the thermal decomposition of irradiated KIO₃ is best described by the contracting sphere model equation, with an activation energy value of ~340 kJ mol^?1.     

The effect of the oxidant used during polymerization on the solid-state decomposition kinetics of poly(4-methyl catechol)

Herein, the oxidative polymerization of 4-methyl catechol using different oxidants including NaOCl, H₂O₂, and air were reported. Potassium hydroxide solution was used as the reaction solvent and polymerization studies were carried out between 323 and 363 K. Optimum reaction conditions of the polymerization were established and NaOCl was found as the most active oxidant. The structure and characterization of the polymer using FT-IR, ultraviolet–visible (UV–Vis), ¹H-NMR, ¹³C-NMR, thermogravimetry and size exclusion chromatography were confirmed. In addition, the relationship between molar mass distribution of polymer and kinetics parameters such as activation energy, pre-exponential factor of decomposition process was investigated. For this purpose, methods based on multiple heating rates such as Flynn–Wall–Ozawa, Friedman, Tang, Kissinger–Akahira–Sunose, and Kissinger were used. The results obtained show that activation energy increased with an increase of molar mass.     

Thermogravimetric analyses revealed the bioenergy potential of <Emphasis Type="Italic">Eulaliopsis binata</Emphasis>

The present study was focused on the thermal degradation of Eulaliopsis binata biomass produced on a salt-affected soil without any fertilizer or pesticide applications. The plant biomass was subjected to thermal degradation experiments at three heating rates, 10, 30 and 50 K min^?1. The kinetic analyses were performed through isoconversional models of Kissinger–Akahira–Sunose and Flynn–Wall–Ozawa, followed by the calculation of thermodynamic parameters of activation. The high heating value was calculated as 15.10 MJ mol^?1. The activation energy values of the grass were shown to be ranging from 118 through 240 kJ mol^?1. Energy difference of enthalpies of activation between the reagent and the activated complex was in accordance with activation energies. Pre-exponential factors indicated the reaction to follow first-order kinetics. Gibbs free energy for the grass was measured to be ranging from 171 to 174 kJ mol^?1. Our data have shown that E. binata biomass offers remarkable potential as a low-cost biomass for bioenergy.     

Mechanism and kinetics of thermal degradation of insulating materials developed from cellulose fiber and fire retardants

The mechanism and kinetics of thermal degradation of materials developed from cellulose fiber and synergetic fire retardant or expandable graphite have been investigated using thermogravimetric analysis. The model-free methods such as Kissinger–Akahira–Sunose (KAS), Friedman, and Flynn–Wall–Ozawa (FWO) were applied to measure apparent activation energy (E_α). The increased E_α indicated a greater thermal stability because of the formation of a thermally stable char, and the decreased E_α after the increasing region related to the catalytic reaction of the fire retardants, which revealed that the pyrolysis of fire retardant-containing cellulosic materials through more complex and multi-step kinetics. The Friedman method can be considered as the best method to evaluate the E_α of fire-retarded cellulose thermal insulation compared with the KAS and FWO methods. A master-plots method such as the Criado method was used to determine the possible degradation mechanisms. The degradation of cellulose thermal insulation without a fire retardant is governed by a D3 diffusion process when the conversion value is below 0.6, but the materials containing synergetic fire retardant and expandable graphite fire retardant may have a complicated reaction mechanism that fits several proposed theoretical models in different conversion ranges. Gases released during the thermal degradation were identified by pyrolysis–gas chromatography/mass spectrometry. Fire retardants could catalyze the dehydration of cellulosic thermal insulating materials at a lower temperature and facilitate the generation of furfural and levoglucosenone, thus promoting the formation of char. These results provide useful information to understand the pyrolysis and fire retardancy mechanism of fire-retarded cellulose thermal insulation.

     

Kinetic analysis for non-isothermal decomposition of un-irradiated and gamma-irradiated potassium bromate

The thermal decomposition of un-irradiated and gamma-irradiated potassium bromate (KBrO₃) was performed under non-isothermal conditions at different heating rates (5, 10, 15 and 20 K min^?1). The data was analysed using isoconversional and non-isoconversional methods. The kinetic parameters of thermal decomposition process were obtained by three model-free isoconversional methods: Flynn–Wall–Ozawa, Kissinger–Akahira–Sunose and Friedman. Irradiation enhances the decomposition and the effect increases with the irradiation dose. The activation energy decreases on irradiation. Kinetic analysis of data in view of various solid-state reaction models showed that the decomposition of un-irradiated and irradiated anhydrous KBrO₃ is best described by the Avrami–Erofeev model equation, [?ln(l?α)]^1/2 = kt.     

Thermal degradation of B-group vitamins: B1, B2 and B6

The thermal behaviour of vitamins B₁, B₂ and B₆ under non-isothermal conditions and dynamic air atmosphere was studied. According to our study, it was determined that the most stable compound is vitamin B₂. A kinetic analysis of the thermodegradation process using four different data processing methods (Friedman, Flynn–Wall–Ozawa, Kissinger–Akahira–Sunose and modified NPK) was performed. The NPK was the only method that made it possible to evaluate the contribution to the reaction rate of the temperature and conversion, respectively. The results obtained from kinetic analysis were corroborated with the molecular architecture of the studied compounds.     

The influence of CaCO3 filler component on thermal decomposition process of PP/LDPE/DAP ternary blend

Polypropylene‐low density polyethylene (PP‐LDPE) blends involving PP‐LDPE (90/10 wt%.) with (0.06 wt%) dialkyl peroxide (DAP) and different amounts (5, 10, 20 wt%) of calcium carbonate (CaCO₃) were prepared by melt‐blending with a single‐screw extruder. The effect of addition of CaCO₃ on thermal decomposition process and kinetic parameters, such as activation energy and pre‐exponential factor of PP‐LDPE blend with DAP matrix, was studied. The kinetics of the thermal degradation of composites was investigated by thermogravimetric analysis in dynamic nitrogen atmosphere at different heating rates. TG curves showed that the thermal decomposition of composites occurred in one weight‐loss stage. The apparent activation energies of thermal decomposition for composites, as determined by the Tang method (TM), the Kissinger–Akahira–Sunose method (KAS), the Flynn–Wall–Ozawa method (FWO), and the Coats–Redfern (CR) method were 156.6, 156.0, 159.8, and 167.7 kJ.mol^?1 for the thermal decomposition of composite with 5 wt% CaCO₃, 191.5, 190.8, 193.1, and 196.8 kJ.mol^?1 for the thermal decomposition of composite with 10 wt% CaCO₃, and 206.3, 206.1, 207.5, and 203.8 kJ mol^?1 for the thermal decomposition of composite with 20 wt% CaCO₃, respectively. The most likely decomposition process for weight‐loss stages of composites with CaCO₃ content 5 and 10 wt% was an A_n sigmoidal type. However, the most likely decomposition process for composite with CaCO₃ content 20 wt% was an R_n contracted geometry shape type in terms of the CR and master plots results. It was also found that the thermal stability, activation energy, and thermal decomposition process were changed with the increase in the CaCO₃ filler weight in composite structure. Copyright © 2009 John Wiley & Sons, Ltd.     

Thermal degradation kinetics study and thermal cracking of waste cooking oil for biofuel production

Thermal cracking of waste cooking oil (WCO) for production of liquid fuel has gained special interest due to the growing demand of renewable fuel, depleting fossil fuel reserves and environmental issues. In the present work, thermal cracking of WCO to produce liquid hydrocarbon fuels without any preprocessing has been studied. Moreover, non-isothermal kinetics of WCO using thermogravimetric analysis (TGA) has been studied under an inert atmosphere at various heating rates. According to TGA result, active thermal decomposition of WCO was found to be between 318 and 500 °C. Furthermore, the temperature at which the maximum mass loss rate attained was shifted to higher values as the heating rates increased from 10 to 50 °C min^?1 and the values were found to be approximately similar to that of R ₅₀. Besides, model-free iso-conversion kinetic methods such as Friedman (FM), Kissinger–Akahira–Sunose (KAS) and Flynn–Wall–Ozawa (FWO) were used to determine the activation energies of WCO degradation. The average activation energy for the thermal degradation of WCO was found to be 243.7, 211.23 and 222 kJ mol^?1 for FM, KAS and FWO kinetic methods, respectively. Additionally, the cracking of WCO was studied in a semi-batch reactor under an inert atmosphere and the influences of cracking temperature, time and heating rates on product distribution were investigated. From the reaction, an optimum yield of 72 mass% was obtained at a temperature of 475 °C, time of 180 min and a heating rate of 10 °C min^?1. The physicochemical properties studied were in accordance with ASTM standards.     

Thermal behavior and kinetic modeling of (NH4)4UO2(CO3)3 decomposition under non-isothermal conditions

The thermal behavior and kinetic analysis of ammonium uranyl carbonate decomposition has been studied in inert gas, O₂, and 90%Ar–10%H₂ atmospheres under non-isothermal conditions. The results showed a dependence on specific surface area with the decomposition temperature of ammonium uranyl tri-carbonate (AUC). Specific surface area increases and reaches a maximum between 300 and 400 °C and decreases at T > 400 °C. The reaction paths of AUC decomposition under the three atmospheres were proposed. The integral methods Flynn–Wall–Ozawa (FWO) and Kissinger–Akahira–Sunose (KAS) were used for the kinetic analysis. The activation energy averages are 58.01 and 56.19 kJ/mol by KAS and FWO methods, respectively.

     

Bismaleimide/rice husk silica reinforced composites

Silica derived from the renewable resource rice husk is modified using stearic acid and N-[4-(chlorocarbonyl)phenyl]maleimide. These materials are used as fillers in the bismaleimide, 4,4′-bismaleimidodiphenylmethane (BMIM), and thermally cured. The thermogravimetric (TG) curves for polyBMIM/silica composites showed no pronounced changes compared to the TG curve for the pure polyBMIM. Kissinger–Akahira–Sunose, Flynn–Wall–Ozawa, and Friedman methods are used to compute the activation energy (E _a) for degradation. Silica and surface-modified silica using stearic acid dispersed by ultrasonication increase the activation energy for degradation and show considerable influence on the thermal stability of cured BMIM. The long alkyl chain present in the stearic acid modified silica and the bulky spacer present in the chemically modified silica definitely alter the degradation process of cured BMIM. The SEM studies indicated uniform dispersion of the silica particles in the polyBMIM.     

Kinetics of thermal degradation of poly(aryl ether)s containing phthalazinone and life estimation

New special engineering thermoplastics, poly(phthalazinone ether sulfone) (PPES) and poly(phthalazinone ether sulfone ketone) (PPESK), containing phthalazinone are synthesized through step-polymerization. The kinetics of thermal degradation of PPES and PPESK (1/1) in nitrogen is investigated at several heating rates by thermogravimetry (TG). It is concluded that, based on using Satava’s theory, the thermal degradation mechanism of PPESK (1/1) is nucleation and growth, the order of reaction of the degradation process is one (n = 1). In contrast, the thermal degradation mechanism of PPES is a phase boundary controlled reaction and the order of the reaction is two (n = 2). The kinetic parameters, including reaction energy and frequency factor of thermal degradation reaction for PPES and PPESK (1/1) are analyzed using isoconversional Friedman, Kissinger–Akahira–Sunose (K–A–S) and Ozawa method. In addition, the study focus on the influence of heating rate and ratio of ketone/sulfone on thermal stability and the life estimation are described.     

Understanding Regium Bonds and their Competition with Hydrogen Bonds in Au2:HX Complexes

A theoretical study of the regium and hydrogen bonds (RB and HB, respectively) in Au₂:HX complexes has been carried out by means of CCSD(T) calculations. The theoretical study shows as overall outcome that in all cases the complexes exhibiting RB are more stable that those with HB. The binding energies for RB complexes range between −24 and −180 kJ ⋅ mol^−1, whereas those of the HB complexes are between −6 and −19 kJ ⋅ mol⁻¹. DFT-SAPT also indicated that HB complexes are governed by electrostatics, but RB complexes present larger contribution of the induction term to the total attractive forces. ¹⁹⁷Au chemical shifts have been calculated using the relativistic ZORA Hamiltonian.     

On non-isothermal kinetics of two Cu-based bulk metallic glasses

In this paper, two Cu-based bulk metallic glasses, Cu₅₅Zr₃₇Ti₈ and Cu₆₁Zr₃₄Ti₅, have been evaluated in thermodynamics and kinetics. The activation energies with the constant values were generalized by different theoretical models. The E _x of Cu₅₅Zr₃₇Ti₈ and Cu₆₁Zr₃₄Ti₅ are 319 ± 12 and 359 ± 12 kJ mol^?1, respectively, implying that the as-cast alloys have a good stability in thermodynamics. On the other hand, variable activation energies were also determined using Kissinger–Akahira–Sunose method, Ozawa–Flynn–Wall method, and Friedman’s method. The results showed that the Ea(x) at the beginning of the crystallization are higher than that at the end of the crystallization in the first exothermic peak. By introducing the local Avrami exponent, n(x), the growth and nucleation mechanisms were discussed. Furthermore, the effects of different activation energies on local Avrami exponent were also given a discussion.     

A New Approach for the Voltammetric Determination of Amoxicillin in the Dosage Form Using Azo Coupling Reaction with Sulphanilamide

The novel method of amoxicillin (AM) determination has been developed using single-sweep polarography. The proposed method is based on the obtaining of yellow coloured azo compound due to azo coupling reaction of previous diazotized sulphanilamide (SA) (in the medium of 0.6 M hydrochloric acid) with amoxicillin at pH=9.0 with the further reduction of the formed analytical form on a dropping mercury electrode. Voltammetric determination of amoxicillin is carried out due to the reduction peak of azo group of the obtained azo compound in the presence of 0.05 mol ⋅ L⁻¹ Na₂B₄O₇ as a background electrolyte at the potential E_c^p2=−0.55 V and potential sweep rate of 2.5 V ⋅ s⁻¹. The developed voltammetric method has two linear ranges of the determined concentrations (0.05–2.0) ⋅ 10⁻⁵ mol ⋅ L⁻¹ and (0.2–1.0) ⋅ 10⁻⁴ mol ⋅ L⁻¹ and the high sensitivity: LOD without the removing of unreacted sodium nitrite is 1.1 ⋅ 10⁻⁶ mol ⋅ L⁻¹, and 7.2 ⋅ 10⁻⁷ mol ⋅ L⁻¹, when NaNO₂ excess is removed using urea. The developed voltammetric technique of AM determination has been approved during the analyses of tablets and oral suspension.     

The kinetics and mechanisms of gas phase elimination of primary,secondary, and tertiary 2‐hydroxyalkylbenzenes

2‐Phenylethanol, racemic 1‐phenyl‐2‐propanol, and 2‐methyl‐1‐phenyl‐2‐propanol have been pyrolyzed in a static system over the temperature range 449.3–490.6°C and pressure range 65–198 torr. The decomposition reactions of these alcohols in seasoned vessels are homogeneous, unimolecular, and follow a first‐order rate law. The Arrhenius equations for the overall decomposition and partial rates of products formation were found as follows: for 2‐phenylethanol, overall rate log k₁(s⁻¹)=12.43−228.1 kJ mol⁻¹ (2.303 RT)⁻¹, toluene formation log k₁(s⁻¹)=12.97−249.2 kJ mol⁻¹ (2.303 RT)⁻¹, styrene formation log k₁(s⁻¹)=12.40−229.2 kJ mol⁻¹(2.303 RT)⁻¹, ethylbenzene formation log k₁(s⁻¹)=12.96−253.2 kJ mol⁻¹(2.303 RT)⁻¹; for 1‐phenyl‐2‐propanol, overall rate log k₁(s⁻¹)=13.03−233.5 kJ mol⁻¹(2.303 RT)⁻¹, toluene formation log k₁(s⁻¹)=13.04−240.1 kJ mol⁻¹(2.303 RT)⁻¹, unsaturated hydrocarbons+indene formation log k₁(s⁻¹)=12.19−224.3 kJ mol⁻¹(2.303 RT)⁻¹; for 2‐methyl‐1‐phenyl‐2‐propanol, overall rate log k₁(s⁻¹)=12.68−222.1 kJ mol⁻¹(2.303 RT)⁻¹, toluene formation log k₁(s⁻¹)=12.65−222.9 kJ mol⁻¹(2.303 RT)⁻¹, phenylpropenes formation log k₁(s⁻¹)=12.27−226.2 kJ mol⁻¹(2.303 RT)⁻¹. The overall decomposition rates of the 2‐hydroxyalkylbenzenes show a small but significant increase from primary to tertiary alcohol reactant. Two competitive eliminations are shown by each of the substrates: the dehydration process tends to decrease in relative importance from the primary to the tertiary alcohol substrate, while toluene formation increases. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 401–407, 1999     

Thermal behaviour studies of procaine and benzocaine

The analysed substances, procaine and benzocaine, are two anaesthetic agents currently being administered in tablet form, also in the topical (cream, gel, balm) and injectable dosage forms. The TG/DTG/DTA curves were obtained in air at different heating rates. For determination of the heat effects, the DTA curves (in μV) were changed with the heat flow curves (in mW), so that the peak area corresponds to an energy in J g^?1 or kJ mol^?1. The non-isothermal experiments are preformed to investigate the thermal degradation process of these active substances, both as a solid and are performed in a dynamic atmosphere of air at different heating rates, by heating from room temperature to 500 °C. The kinetic analysis was performed using the TG data in air for the first step of substance’s decomposition at four heating rates: 7, 10, 12 and 15 °C min^?1. The data were processed according to an appropriate strategy to the following kinetic methods: Kissinger–Akahira–Sunose, Flynn–Wall–Ozawa, Friedman and NPK, to obtain realistic kinetic parameters, even if the decomposition process is a complex one. Thermal analysis was supplemented using Fourier Transform infrared spectroscopy coupled with the TG device to identify the anaesthetics with any products which may have formed (EGA—the evolved gas analysis).     

Protonation of CO2, COS,CS2: Proton affinities and the structures of the protonated species

The geometric structures of a number of isomers of the ions formed by protonation of CO₂, COS and CS₂, and of the parent molecules themselves, have been fully optimized using ab initio quantum chemical methods. Stable minima have been found both for molecules protonated at the terminal atom and at the central carbon atom; ions of the latter type show strong near-degeneracy effects which have been ignored in previous calculations. Proton affinities of CO₂, COS and CS₂ have been calculated: for CO₂ the theoretical result (565 kJ mol⁻¹) is in excellent agreement with experiment (540 kJ mol⁻¹), given that the experimental proton affinity includes a contribution from zero-point vibration of ≈ −27 kJ mol⁻¹. For COS, for which no experimental value is available, the calculations give almost identical results for both O and S protonated species (619 and 636 kJ mol⁻¹, respectively). It may not therefore be possible to distinguish these two isomers experimentally. The theoretical result for CS₂ (678 kJ mol⁻) suggests that the current experimental value of the proton affinity (699 kJ mol⁻¹) is too high, since this value includes a zero-point vibration contribution of some −19 kJ mol⁻¹).