Ionic Liquid Ordering at an Oxide Surface

The interaction of the ionic liquid [C₄C₁Im][BF₄] with anatase TiO₂, a model photoanode material, has been studied using a combination of synchrotron radiation photoelectron spectroscopy and near‐edge X‐ray absorption fine structure spectroscopy. The system is of interest as a model for fundamental electrolyte–electrode and dye‐sensitized solar cells. The initial interaction involves degradation of the [BF₄]^? anion, resulting in incorporation of F into O vacancies in the anatase surface. At low coverages, [C₄C₁Im][BF₄] is found to order at the anatase(101) surface via electrostatic attraction, with the imidazolium ring oriented 32±4° from the anatase TiO₂ surface. As the coverage of ionic liquid increases, the influence of the oxide surface on the topmost layers is reduced and the ordering is lost.     

Temperature-Dependent Surface Enrichment Effects in Binary Mixtures of Fluorinated and Non-Fluorinated Ionic Liquids

Using angle-resolved X-ray photoelectron spectroscopy (ARXPS), we investigate the topmost nanometers of various binary ionic liquid (IL) mixtures at different temperatures in the liquid state. The mixtures consist of ILs with the same [PF₆]⁻ anion but two different cations, namely 3-methyl-1-(3,3,4,4,4-pentafluorobutyl)imidazolium hexafluorophosphate, [PFBMIm][PF₆], and 1-butyl-3-methylimidazolium hexafluorophosphate, [C₄C₁Im][PF₆], with 10, 25, 50 and 75 mol % content of [PFBMIm][PF₆]. We observe a preferential enrichment of the fluorinated chain in the topmost layer, relative to the bulk composition, which is most pronounced for the lowest content of [PFBMIm][PF₆]. Upon cooling the mixtures stepwise from 95 °C until surface charging effects in XPS indicate solidification, we observe a pronounced increase in surface enrichment of the fluorinated chain with decreasing temperature in the liquid state. In contrast to the mixtures with lower [PFBMIm][PF₆] contents, cooling the 75 mol % mixture additionally shows an abrupt decrease of the fluorinated chain signal before complete solidification occurs, which is assigned to partial precipitation effects.     

Influence of Substituents and Functional Groups on the Surface Composition of Ionic Liquids

We have performed a systematic study addressing the surface behavior of a variety of functionalized and non‐functionalized ionic liquids (ILs). From angle‐resolved X‐ray photoelectron spectroscopy, detailed conclusions on the surface enrichment of the functional groups and the molecular orientation of the cations and anions is derived. The systems include imidazolium‐based ILs methylated at the C2 position, a phenyl‐functionalized IL, an alkoxysilane‐functionalized IL, halo‐functionalized ILs, thioether‐functionalized ILs, and amine‐functionalized ILs. The results are compared with the results for corresponding non‐functionalized ILs where available. Generally, enrichment of the functional group at the surface is only observed for systems that have very weak interaction between the functional group and the ionic head groups.     

On-Surface Metathesis of an Ionic Liquid on Ag(111)

We investigated the adsorption, surface enrichment, ion exchange, and on-surface metathesis of ultrathin mixed IL films on Ag(111). We stepwise deposited 0.5 ML of the protic IL diethylmethylammonium trifluoromethanesulfonate ([dema][TfO]) and 1.0 ML of the aprotic IL 1-methyl-3-octylimidazolium hexafluorophosphate ([C₈C₁Im][PF₆]) at around 90 K. Thereafter, the resulting layered frozen film was heated to 550 K, and the thermally induced phenomena were monitored in situ by angle-resolved X-ray photoelectron spectroscopy. Between 135 and 200 K, [TfO]⁻ anions at the Ag(111) surface are exchanged by [PF₆]⁻ anions and enriched together with [C₈C₁Im]⁺ cations at the IL/vacuum interface. Upon further heating, [dema][PF₆] and [OMIm][PF₆] desorb selectively at ∼235 and ∼380 K, respectively. Hereby, a wetting layer of pure [C₈C₁Im][TfO] is formed by on-surface metathesis at the IL/metal interface, which completely desorbs at ∼480 K. For comparison, ion enrichment at the vacuum/IL interface was also studied in macroscopic IL mixtures, where no influence of the solid support is expected.     

Potential Screening at Electrode/Ionic Liquid Interfaces from In Situ X-ray Photoelectron Spectroscopy

A new approach to investigate potential screening at the interface of ionic liquids (ILs) and charged electrodes in a two-electrode electrochemical cell by in situ X-ray photoelectron spectroscopy has been introduced. Using identical electrodes, we deduce the potential screening at the working and the counter electrodes as a function of applied voltage from the potential change of the bulk IL, as derived from corresponding core level binding energy shifts for different IL/electrode combinations. For imidazolium-based ILs and Pt electrodes, we find a significantly larger potential screening at the anode than at the cathode, which we attribute to strong attractive interactions between the imidazolium cation and Pt. In the absence of specific ion/electrode interactions, asymmetric potential screening only occurs for ILs with different cation and anion sizes as demonstrated for an imidazolium chloride IL and Au electrodes, which we assign to the different thicknesses of the electrical double layers. Our results imply that potential screening in ILs is mainly established by a single layer of counterions at the electrode.     

Formation and Surface Behavior of Pt and Pd Complexes with Ligand Systems Derived from Nitrile-functionalized Ionic Liquids Studied by XPS

We studied the formation and surface behavior of Pt(II) and Pd(II) complexes with ligand systems derived from two nitrile-functionalized ionic liquids (ILs) in solution using angle-resolved X-ray photoelectron spectroscopy (ARXPS). These ligand systems enabled a high solubility of the metal complexes in IL solution. The complexes were prepared by simple ligand substitution under vacuum conditions in defined excess of the coordinating ILs, [C₃CNC₁Im][Tf₂N] and [C₁CNC₁Pip][Tf₂N], to immediately yield solutions of the final products. The ILs differ in the cationic head group and the chain length of the functionalized substituent. Our XPS measurements on the neat ILs gave insights in the electronic properties of the coordinating substituents revealing differences in donation capability and stability of the complexes. Investigations on the composition of the outermost surface layers using ARXPS revealed no surface affinity of the nitrile-functionalized chains in the neat ILs. Solutions of the formed complexes in the nitrile ILs showed homogeneous distribution of the solute at the surface with the heterocyclic moieties preferentially orientated towards the vacuum, while the metal centers are rather located further away from the IL/vacuum interface.     

Physical Vapor Deposition of [EMIM][Tf2N]: A New Approach to the Modification of Surface Properties with Ultrathin Ionic Liquid Films

Ultrathin films of the ionic liquid (IL) 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide, [EMIM][Tf₂N], are prepared on a glass substrate by means of an in situ thermal‐evaporation/condensation process under ultrahigh‐vacuum conditions. By using X‐ray photoelectron spectroscopy (XPS), it is demonstrated that the first layer of the IL film grows two dimensionally, followed by the three‐dimensional growth of successive layers. The first molecular layer consists of a bilayer, with the [EMIM]⁺ cations in contact to the surface and the [Tf₂N]^? anions at the vacuum side. The ultrathin IL films are found to be stable under ambient conditions.     

The Effect of Fluorinated Solvents on the Physicochemical Properties,Ionic Association,and Free Volume of a Prototypical Solvate Ionic Liquid

Solvate ionic liquid (SIL) synthesis and properties depend on a delicate balancing of cation-solvent and cation-anion interactions to produce materials containing only cation-solvent complexes and solvent-separated anions. Most SILs meeting these characteristics fall within the paradigm of oligomeric ethylene oxides (e.g. glymes and glycols) and lithium salts. Targeted functionalization of solvent molecules to achieve desired properties is a relatively unexplored avenue of research. Fluorinated solvents have significantly different electric charge distributions compared to their nonfluorinated analogs. We test the impact of solvent fluorination for a SIL created from equimolar mixtures of lithium bis(trifluoromethylsulfonyl)imide (LiNTf₂) and triethylene glycol (TEG), hereafter [(TEG)₁Li]NTf₂. In the first experiment, TEG is partially substituted with 2,2,4,4,5,5,7,7-octafluoro-3,6-dioxaoctane-1,8-diol (FTEG). This leads to a precipitous decrease in ionic conductivity and larger quantities of ionically-associated Li(NTf₂)₂⁻ species, as detected with vibrational spectroscopy. These observations suggest FTEG does not readily coordinate Li⁺ ions in a manner analogous to TEG. Computational studies reinforce this conclusion. Relative complex cation stabilities are ranked as [(FTEG)₁Li]⁺>[(TEG)₁Li]⁺. A second experiment adds FTEG as a diluent to [(TEG)₁Li]NTf₂. This places FTEG and TEG in competition to coordinate a limited number of Li⁺ ions. The resulting mixtures exhibit conductivity enhancement over the parent SIL and minimal changes in ion speciation due to the poor Li⁺ binding by FTEG compared to TEG. Positron annihilation lifetime spectroscopic studies point to increased amounts of free volume upon dilution of FTEG. This likely explains the origin of the conductivity and viscosity enhancements.     

基于离子液体电解液的有机电化学反应

室温离子液体(RTILs) 作为一类在室温时呈液态且具有良好导电性的新型绿色溶剂, 在有机电化学反应体系中的应用前景广阔。本文介绍了近年报道过的新型离子液体及离子液体电解液的特性,阐述了基于离子液体电解液的电化学实验方法,重点综述了离子液体中的各种有机电化学反应,包括电化学还原反应、CO₂在离子液体中的电化学固定、电化学氧化反应、烯烃的环氧化、选择性氟化反应、偶联反应、功能化有机硅氧烷的合成、电化学氟化脱硫反应、电化学聚合反应等,并展望了发展趋势。     

Temperature-Dependent Surface-Enrichment Effects of Imidazolium-Based Ionic Liquids

We present the first systematic study of the influence of temperature on the degree of surface enrichment of 1-alkyl-3-methylimidazolium-based ionic liquids (ILs). Using angle-resolved X-ray photoelectron spectroscopy, we demonstrate that the degree of surface enrichment strongly decreases with increasing temperature for all the studied ILs. For ILs with the same cation, but different anions, [C₈C₁Im]Br, [C₈C₁Im][TfO] and [C₈C₁Im][Tf₂N], no significant differences of the temperature-induced partial loss of surface enrichment are found. Measurements for [C₄C₁Im][TfO], [C₈C₁Im][TfO] and [C₁₈C₁Im][TfO] indicate a small effect of the chain length. For [C₁₈C₁Im][TfO], a continuous decrease of alkyl surface enrichment is found with increasing temperature, with no abrupt changes at the phase-transition temperature from the smectic A to the isotropic phase, indicating that the surface enrichment is not affected by this phase transition.     

Infrared Spectroscopy of a Wilkinson Catalyst in a Room‐Temperature Ionic Liquid

Homogeneous catalysis in room‐temperature ionic liquids (ILs) constitutes a most interesting field of research with high potential in technical applications. As concerns the hydrogenation of unsaturated hydrocarbons, Wilkinson’s compound RhCl(PPh₃)₃ represents a catalyst that provides high selectivity and activity. Herein, we demonstrate the application of infrared spectroscopy to the quantitative analysis of the Wilkinson catalyst in the IL 1‐ethyl‐3‐methylimidazolium acetate ([EMIM][OAc]). Our study demonstrates for the first time the quantitative, accurate and reproducible determination of the concentration of a rhodium catalyst by means of IR spectroscopy and, moreover, allows the investigation of intermolecular interactions. Spectral features, located mainly in the fingerprint region of the IR spectrum, are identified revealing the influence of the dissolved catalyst on the IL’s vibrational structure. In particular, the ring‐bending mode of the imidazolium ring shows a frequency shift as a function of catalyst concentration, probably due to hydrogen‐bond formation between the IL cation and the Rh complex. The results show the potential of IR spectroscopy both for application as a quick process control technology in catalytic processes and as a tool for better understanding of IL–catalyst interactions.     

Entrapping an Ionic Liquid with Nanocarbon: The Formation of a Tailorable and Functional Surface

An interface microenvironment between nanocarbon and ionic liquids (ILs) is presented. By an entrapping effect, a few layers of ILs can be finely deposited on the surface of nanocarbon, endowing amazingly tailorable surface properties. The entrapped IL layer, which was believed to be unable to be charred under pyrolysis conditions alone, can be further carbonized to a functional carbon layer. C, B, and N were confirmed to share the same hexagonal ring in the resultant layer, which provides more designable electronic properties.     

On the Use of a Protic Ionic Liquid with a Novel Cation To Study Anion Basicity

The need for reliable means of ordering and quantifying the Lewis basicity of anions is discussed and the currently available methods are reviewed. Concluding that there is need for a simple impurity‐insensitive tool, we have sought, and here describe, a new method using NMR spectroscopy of a weak base, a substituted urea, 1,3‐dimethyl‐2‐imidazolidinone (DMI), as it is protonated by Brønsted acids of different strengths and characters. In all cases studied the product of protonation is a liquid (hence a protic ionic liquid). NMR spectroscopy detects changes in the electronic structure of the base upon interaction with the proton donors. As the proton‐donating ability, that is, acidity, increases, there is a smooth but distinct transition from a hydrogen‐bonded system (with no net proton transfer) to full ionicity. The liquid state of the samples and high concentration of nitrogen atoms, despite the very low natural abundance of its preferred NMR‐active isotope (¹⁵N), make possible the acquisition of ¹⁵N spectra in a relatively short time. These ¹⁵N, along with ¹³C, chemical shifts of the carbonyl atom, and their relative responses to protonation of the carbonyl oxygen, can be used as a means, sensitive to anion basicity and relatively insensitive to impurities, to sort anions in order of increasing hydrogen bond basicity. The order is found to be as follows: SbF₆^?<BF₄^?<NTf₂^?>ClO₄^?>FSO₃^?<TfO^?<HSO₄^?<Cl^?<MsO^?.     

以季鏻盐离子液体为反应介质的绿色有机反应*

与铵盐类离子液体比较,季鏻盐离子液体具有挥发性更低,物理、化学性质更加稳定,兼具催化功能等优点。近年来,季鏻盐离子液体作为一种绿色反应介质日益受到重视,很多类型的有机反应在季鏻盐离子液体中得到应用,收到了很好的效果。本文主要以2000年以来的期刊文献报道为线索,对季鏻盐离子液体的制备方法以及以其作为反应介质的绿色有机反应进行了综述。这些反应主要包括Diels-Alder反应、Heck反应、Suzuki反应、Buchwald-Hartwig 反应、Friedel-Crafts反应、Kornblum 取代反应、Grignard反应、羰基化反应、氢甲酰化反应、转移氢化反应、酯化反应等多种类型。特别是对于一些涉及强碱性反应条件或亲电取代的反应类型,季鏻盐离子液体具有特殊的优势。     

离子液体在纤维素研究中的应用

离子液体是一种新型的绿色溶剂,纤维素是一种可再生的生物资源,作为非衍生化纤维素溶剂,离子液体在纤维素研究中呈现出了良好的发展态势。本文综述了纤维素在离子液体溶解、再生、衍生化反应及其在生物酶催化等方面的一些研究成果。     

Vacuum Surface Science Meets Heterogeneous Catalysis: Dehydrogenation of a Liquid Organic Hydrogen Carrier in the Liquid State

Ultrahigh vacuum (UHV) surface science techniques are used to study the heterogeneous catalytic dehydrogenation of a liquid organic hydrogen carrier in its liquid state close to the conditions of real catalysis. For this purpose, perhydrocarbazole (PH), otherwise volatile under UHV, is covalently linked as functional group to an imidazolium cation, forming a non‐volatile ionic liquid (IL). The catalysed dehydrogenation of the PH unit as a function of temperature is investigated for a Pt foil covered by a macroscopically thick PH‐IL film and for Pd particles suspended in the PH‐IL film, and for PH‐IL on Au as inert support. X‐ray photoelectron spectroscopy and thermal desorption spectroscopy allows us to follow in situ the catalysed transition of perhydrocarbazole to carbazole at technical reaction temperatures. The data demonstrate the crucial role of the Pt and Pd catalysts in order to shift the dehydrogenation temperature below the critical temperature of thermal decomposition.     

Understanding the Buoy Effect of Surface-Enriched Pt Complexes in Ionic Liquids: A Combined ARXPS and Pendant Drop Study**

Recently, we demonstrated that Pt catalyst complexes dissolved in the ionic liquid (IL) [C₄C₁Im][PF₆] can be deliberately enriched at the IL surface by introducing perfluorinated substituents, which act like buoys dragging the metal complex towards the surface. Herein, we extend our previous angle-resolved X-ray photoelectron spectroscopy (ARXPS) studies at complex concentrations between 30 and 5 %_mol down to 1 %_mol and present complementary surface tension pendant drop (PD) measurements under ultraclean vacuum conditions. This combination allows for connecting the microscopic information on the IL/gas interface derived from ARXPS with the macroscopic property surface tension. The surface enrichment of the Pt complexes is found to be most pronounced at 1 %_mol. It also displays a strong temperature dependence, which was not observed for 5 %_mol and above, where the surface is already saturated with the complex. The surface enrichment deduced from ARXPS is also reflected by the pronounced decrease in surface tension with increasing concentration of the catalyst. We furthermore observe by ARXPS and PD a much stronger surface affinity of the buoy-complex as compared to the free ligands in solution. Our results are highly interesting for an optimum design of IL-based catalyst systems with large contact areas to the surrounding reactant/product phase, such as in supported IL phase (SILP) catalysis.     

室温离子液体溶解和分离木质纤维素*

作为世界上最丰富的生物质资源,木质纤维素是生产清洁能源和精细化工品的天然原料。室温离子液体是近年来出现的一类绿色材料,对溶解和分离木质纤维素具有广阔的应用前景。本文在介绍木质素、纤维素、半纤维素和相关室温离子液体的组成与结构的基础上,综述了室温离子液体在溶解、分离木质纤维素方面的研究进展。根据目前所报道的研究结果,总结了不同离子液体对木质素、纤维素、半纤维素的溶解作用以及对木质纤维素的分离性能,分析了离子液体的结构与其溶解性能的关系,讨论了可能的溶解机理。最后提出了这一领域存在的问题,并对其未来的发展作了展望。