Raman and 29Si MAS NMR spectroscopy of framework materials containing three-membered rings

Raman and ²⁹Si MAS NMR spectroscopies are evaluated for the identification of three-membered rings (3MR) in framework oxide materials. Raman and ²⁹Si MAS NMR spectra from the 3MR-containing materials euclase, phenakite, clinohedrite, willemite, lovdarite, VPI-7, ZSM-18 and dipotassium zinc tetrasilicate are presented. The Raman spectra from these materials do not exhibit common bands representing vibrational modes assignable to individual 3MR. The dense beryllosilicate and zincosilicate minerals exhibit ²⁹Si MAS NMR resonances indicative of silicon positioned in 3MR while the molecular sieves lovdarite and VPI-7 give ²⁹Si MAS NMR resonances that can be assigned to silicons located at the center of “spiro-5” units that are constructed from two 3MR. Silicon atoms located in isolated 3MR in the molecular sieves ZSM-18 and dipotassium zinc tetrasilicate do not exhibit ²⁹Si MAS NMR resonances that can be distinguished from those assigned to silicons residing in 4MR and larger.The ²⁹Si MAS NMR spectra from the new materials VPI-8, VPI-9 and VPI-10 do not exhibit ²⁹Si MAS NMR resonances indicative of “spiro-5” units. The presence of isolated 3MR in these materials cannot be ruled out from the ²⁹Si MAS NMR spectroscopic results.     

A new signal processing method to observe weak P and O NMR peaks

In NMR spectroscopy, situations may arise where sample concentrations are below the threshold for FT NMR detection, or sample lability constrains allowable acquisition times. In ³¹P NMR, for example, observation of ¹³C satellites may not be practical under given conditions. For ¹⁷O NMR, which is useful to characterize ¹⁷O-labeled phosphate derivatives, similar considerations may apply, and added factors are the cost of isotopically enriched samples and the requirement to obtain spectra at relatively high temperatures if narrow spectral peak line widths are desired. We report here application of a new signal processing method [S.D. Kunikeev, H.S. Taylor, J. Phys. Chem. A 108, 2004 743] to observation of weak ³¹P and ¹⁷O NMR peaks.     

NMR Crystallography Enhanced by Quantum Chemical Calculations and Liquid State NMR Spectroscopy for the Investigation of Se-NHC Adducts**

N-heterocyclic carbene ligands (NHC) are widely utilized in catalysis and material science. They are characterized by their steric and electronic properties. Steric properties are usually quantified on the basis of their static structure, which can be determined by X-ray diffraction. The electronic properties are estimated in the liquid state; for example, via the ⁷⁷Se liquid state NMR of Se-NHC adducts. We demonstrate that ⁷⁷Se NMR crystallography can contribute to the characterization of the structural and electronic properties of NHC in solid and liquid states. Selected Se-NHC adducts are investigated via ⁷⁷Se solid state NMR and X-ray crystallography, supported by quantum chemical calculations. This investigation reveals a correlation between the molecular structure of adducts and NMR parameters, including not only isotropic chemical shifts but also the other chemical shift tensor components. Afterwards, the liquid state ⁷⁷Se NMR data is presented and interpreted in terms of the quantum chemistry modelling. The discrepancy between the structural and electronic properties, and in particular the π-accepting abilities of adducts in the solid and liquid states is discussed. Finally, the ¹³C isotropic chemical shift from the liquid state NMR and the ¹³C tensor components are also discussed, and compared with their ⁷⁷Se counterparts. ⁷⁷Se NMR crystallography can deliver valuable information about NHC ligands, and together with liquid state ⁷⁷Se NMR can provide an in-depth outlook on the properties of NHC ligands.     

SEAL by NMR: Glyco‐Based Selenium‐Labeled Affinity Ligands Detected by NMR Spectroscopy

We report a method for the screening of interactions between proteins and selenium‐labeled carbohydrate ligands. SEAL by NMR is demonstrated with selenoglycosides binding to lectins where the selenium nucleus serves as an NMR‐active handle and reports on binding through ⁷⁷Se NMR spectroscopy. In terms of overall sensitivity, this nucleus is comparable to ¹³C NMR, while the NMR spectral width is ten times larger, yielding little overlap in ⁷⁷Se NMR spectroscopy, even for similar compounds. The studied ligands are singly selenated bioisosteres of methyl glycosides for which straightforward preparation methods are at hand and libraries can readily be generated. The strength of the approach lies in its simplicity, sensitivity to binding events, the tolerance to additives and the possibility of having several ligands in the assay. This study extends the increasing potential of selenium in structure biology and medicinal chemistry. We anticipate that SEAL by NMR will be a beneficial tool for the development of selenium‐based bioactive compounds, such as glycomimetic drug candidates.     

1H‐19F REDOR‐filtered NMR spin diffusion measurements of domain size in heterogeneous polymers

Solid state NMR spectroscopy is inherently sensitive to chemical structure and composition and thus makes an ideal method to probe the heterogeneity of multicomponent polymers. Specifically, NMR spin diffusion experiments can be used to extract reliable information about spatial domain sizes on multiple length scales, provided that magnetization selection of one domain can be achieved. In this paper, we demonstrate the preferential filtering of protons in fluorinated domains during NMR spin diffusion experiments using ¹H‐¹⁹F heteronuclear dipolar dephasing based on rotational echo double resonance (REDOR) MAS NMR techniques. Three pulse sequence variations are demonstrated based on the different nuclei detected: direct ¹H detection, plus both ¹H?¹³C cross polarization and ¹H?¹⁹F cross polarization detection schemes. This ¹H‐¹⁹F REDOR‐filtered spin diffusion method was used to measure fluorinated domain sizes for a complex polymer blend. The efficacy of the REDOR‐based spin filter does not rely on spin relaxation behavior or chemical shift differences and thus is applicable for performing NMR spin diffusion experiments in samples where traditional magnetization filters may prove unsuccessful. This REDOR‐filtered NMR spin diffusion method can also be extended to other samples where a heteronuclear spin pair exists that is unique to the domain of interest.     

19F-Labeled Probes for Recognition-Enabled Chromatographic 19F NMR

The NMR technique is among the most powerful analytical methods for molecular structural elucidation, process monitoring, and mechanistic investigations; however, the direct analysis of complex real-world samples is often hampered by crowded NMR spectra that are difficult to interpret. The combination of fluorine chemistry and supramolecular interactions leads to a unique detection method named recognition-enabled chromatographic (REC) ¹⁹F NMR, where interactions between analytes and ¹⁹F-labeled probes are transduced into chromatogram-like ¹⁹F NMR signals of discrete chemical shifts. In this account, we summarize our endeavor to develop novel ¹⁹F-labeled probes tailored for separation-free multicomponent analysis. The strategies to achieve chiral discrimination, sensitivity enhancement, and automated analyte identification will be covered. The account will also provide a detailed discussion of the underlying principles for the design of molecular probes for REC ¹⁹F NMR where appropriate.     

2H Chemical-shift resolution and dipolar2H-1H,2H-15N correlations in solid-state MAS NMR spectroscopy for structure determination and distance measurements in hydrogen-bonded systems

In solid-state NMR, deuteron (²H) spectroscopy can be performed in full analogy to¹H spectroscopy, including²H chemical-shift resolution and²H-X dipolar correlation schemes, when the NMR experiments are conducted in a “rotor-synchronized” fashion under fast magic-angle spinning. Here, 2H-X NMR experiments of this type, including²H-¹⁵N and²H-¹H chemical-shift correlations and distance measurements, are introduced and demonstrated on cytosine monohydrate, whose acidic protons can readily be replaced by deuterons by recrystallization from D₂O. In this way,²H NMR spectroscopy provides information complementary to¹H NMR data, which is particularly useful for studying hydrogen bonds in supra- or biomolecular systems. Electronic supplementary material Supplementary material is available in the online versionof this article atand is accessible for authorized users.     

Mesoionic compounds — structure and NMR parameters

It has been shown that¹H,¹³C,¹⁴N,¹⁵N,¹⁷O, and⁷⁷Se NMR are very successful techniques for the identification and investigation of potential valence tautomerism in all types of mesoionic compounds. Especially the combined use of¹⁴N and¹⁵N NMR studies has been shown to be very effective in solving structural problems. From¹⁵N NMR it is possible to obtain accurate chemical shifts and spin-spin couplings, whereas the¹⁴N NMR spectra provide us with nuclear relaxation and some chemical shift data. In particular¹⁴N NMR is very useful for the identification of charged nitrogen atoms in molecules containing non equivalent nitrogen positions. This information is available from the relative¹⁴N signal widths, which depend upon the rates of¹⁴N relaxation, positively charged nitrogen atoms usually have relatively slow¹⁴N relaxation rates thus giving rather sharp NMR signals. Some solid state, CP MAS,¹³C and¹⁵N NMR results are available for comparison with the solution NMR data.Published in Khimiya Geterotsiklischeskikh Soedinenii, No. 9, pp. 1180–1199. September 1995.     

Recent developments in the <Superscript>13</Superscript>C NMR spectroscopic analysis of paramagnetic hemes and heme proteins

Despite the wealth of information that has been obtained from the study of paramagnetic hemes and heme proteins by ¹H NMR spectroscopy, there are certain limitations imposed by the nature of paramagnetically affected resonances that are difficult to overcome. Although it has long been recognized that ¹³C NMR spectroscopy is likely to be a powerful complementary technique to overcome some of these limitations, the low sensitivity and low natural abundance of ¹³C nuclei has resulted in a lag in the application of ¹³C NMR spectroscopy to the study of paramagnetic hemes and heme proteins. The tremendous advances in methodology and instrumentation witnessed in the NMR field, coupled to the advent of recombinant DNA methods that have made possible the preparation and purification of significant quantities of proteins, and the biosynthesis of ¹³C-labeled heme, have contributed to an increased interest in the study of paramagnetic heme active sites by ¹³C NMR spectroscopy. As a consequence, ¹³C NMR spectroscopy is emerging as a powerful tool to study heme electronic structure and structure–function relationships in heme-containing proteins. In this report we strive to summarize some of the recent developments in the analysis of paramagnetic hemes and heme-containing proteins by ¹³C NMR spectroscopy.     

NMR studies of some second and third row transition metal complexes of monothio-β-diketones

A ¹³C and ¹⁹F NMR study of twenty-four ruthenium, rhodium, palladium and platinum complexes containing a difluoromethyl or a trifluoromethyl substitutent(R′) on the monothio-β-diketone, RCSCH₂COR′, is reported. The R-substituents are 2′-thienyl, 2′-naphthyl, phenyl, p-fluorophenyl or p-methylphenyl. The ¹³C NMR data show the chemical shift of the diketonate ring carbons to be geometry dependent. Similarly, the ¹⁹F NMR spectra show chemical shift data which are also metal dependent. The thiocarbonyl and methine carbon's shieldings are also dependent on the nature of the R-group. The rhodium and platinum complexes show carbon-metal and carbon-fluorine spin coupling. The paramagnetic ruthenium(III) complexes give ¹⁹F NMR spectral resonances which are broad and shifted upfield from the corresponding diamagnetic rhodium, palladium and platinum complexes. ¹³C and ¹⁹F NMR data supports a facial octahedral geometry for the rhodium(III) complexes.     

Ferrocenyltrithiocarbonates : I. Direct access from α-ferrocenylcarbinols by a SNi mechanism. Absolute x-ray structure determination of (R)-ferrocenylmethylmethane S-methyl-trithiocarbonate

¹⁰³Rh Chemical shifts of a variety of mono- and di-nuclear rhodium carbonyl complexes are reported together with the modifications to the probe and decoupler unit of a JEOL PS-100 PFT spectrometer which enable these ¹⁰³Rh-decoupled ¹³C NMR measurements to be made. These data are discussed in conjunction with ¹³C NMR data on other rhodium carbonyls.     

NMR Crystallography of an Oxovanadium(V) Complex by an Approach Combining Multinuclear Magic Angle Spinning NMR,DFT, and Spin Dynamics Simulations

Bioinorganic vanadium(V) solids are often challenging for structural analysis. Here, we explore an NMR crystallography approach involving multinuclear ¹³C/⁵¹V solid‐state NMR spectroscopy, density functional theory (DFT), and spin dynamics numerical simulations, for the spectral assignment and the 3D structural analysis of an isotopically unmodified oxovanadium(V) complex, containing 17 crystallographically inequivalent ¹³C sites. In particular, we report the first NMR determination of C–V distances. So far, the NMR observation of ¹³C–⁵¹V proximities has been precluded by the specification of commercial NMR probes, which cannot be tuned simultaneously to the close Larmor frequencies of these isotopes (100.6 and 105.2 MHz for ¹³C and ⁵¹V, respectively, at 9.4 T). By combining DFT calculations and ¹³C–⁵¹V NMR experiments, we propose a complete assignment of the ¹³C spectrum of this oxovanadium(V) complex. Furthermore, we show how ¹³C–⁵¹V distances can be quantitatively estimated.     

Synthesis and NMR elucidation of novel pentacyclo-undecane diamine ligands

The synthesis and NMR elucidation of eight novel pentacyclo-undecane (PCU) diamine compounds are reported. These ligands are potential anti-inflammatory agents to be used against rheumatoid arthritis (RA). One-dimensional NMR techniques (¹H and ¹³C spectra) show major overlapping of methine resonances of the “cage” (PCU) thereby making it extremely difficult to assign all NMR signals. This overlapping occurs as a result of the substitutions made at the quaternary carbons (C-8/C-11) of the cage. Two-dimensional NMR techniques proved to be a useful tool in overcoming this problem.     

Solid-State Nuclear Magnetic Resonance Techniques for the Structural Characterization of Geminal Alane-Phosphane Frustrated Lewis Pairs and Secondary Adducts

The first comprehensive solid-state nuclear magnetic resonance (NMR) characterization of geminal alane-phosphane frustrated Lewis pairs (Al/P FLPs) is reported. Their relevant NMR parameters (isotropic chemical shifts, direct and indirect ²⁷Al-³¹P spin-spin coupling constants, and ²⁷Al nuclear electric quadrupole coupling tensor components) have been determined by numerical analysis of the experimental NMR line shapes and compared with values computed from the known crystal structures by using density functional theory (DFT) methods. Our work demonstrates that the ³¹P NMR chemical shifts for the studied Al/P FLPs are very sensitive to slight structural inequivalences. The ²⁷Al NMR central transition signals are spread out over a broad frequency range (>200 kHz), owing to the presence of strong nuclear electric quadrupolar interactions that can be well-reproduced by the static ²⁷Al wideband uniform rate smooth truncation (WURST) Carr-Purcell-Meiboom-Gill (WCPMG) NMR experiment. ²⁷Al chemical shifts and quadrupole tensor components offer a facile and clear distinction between three- and four-coordinate aluminum environments. For measuring internuclear Al⋅⋅⋅P distances a new resonance-echo saturation-pulse double-resonance (RESPDOR) experiment was developed by using efficient saturation via frequency-swept WURST pulses. The successful implementation of this widely applicable technique indicates that internuclear Al⋅⋅⋅P distances in these compounds can be measured within a precision of ±0.1 Å.     

Quantitative 15N NMR spectroscopy

Line intensities in ¹⁵N NMR spectra are strongly influenced by spin-lattice and spin–spin relaxation times, relaxation mechanisms and experimental conditions. Special care has to be taken in using ¹⁵N spectra for quantitative purposes. Quantitative aspects are discussed for the ¹⁵N NMR of molecules with different nitrogen functional groups and also mixtures of nitrogen-containing compounds. It is shown that, in general, quantitative data are obtainable from integration of ¹⁵N lines in proton decoupled ¹⁵N NMR spectra using NOE suppression. Addition of paramagnetic relaxation reagents (PARR) under controlled conditions is frequently needed to accomplish the experiment within reasonable time limits.     

Magnetic Resonance of Paramagnetic Complexes

The line width of the ESR and NMR signals of paramagnetic transition metal complexes is determined mainly by the electron spin-lattice relaxation time τ_e. Values of τ_e greater than 10^?9 lead to ESR spectra that are readily resolved, while values smaller than 10^?11 give NMR spectra having small line widths. Since fast relaxation processes are effective in nearly all transition metal complexes with several unpaired electrons and in all complexes having an orbitally degenerate ground state, the NMR method has a wider scope. The sign and magnitude of the electron-nucleus coupling can be determined with great sensitivity from the NMR spectra, whereas only the magnitude of this interaction can be determined from the ESR spectra. Free spin densities can be found very accurately from the NMR shifts, and the method can therefore be advantageously applied to kinetic measurements, e.g. on short-lived contact complexes.     

Conformational properties of cyclic pentaalkoxy phosphoranes: Apical–equatorial attachment and nonchair conformation of the phosphorus-containing six-membered ring

A series of phosphoranes with pentacovalent phosphorus contained in a 1,3,2-dioxaphosphorinane ring have been studied by ¹H NMR. One compound was investigated by low-temperature ¹³C NMR and another by X-ray crystallography. Although the ¹H NMR parameters observed are time-averaged, the coupling constants can be accounted for if the phosphoranes have the six-membered ring attached apical–equatorial to phosphorus and occupy in solution rapidly isomerizing boat or slightly twisted boat conformations similar to that found in the X-ray study.     

Quantitative and qualitative 1H, 13C,and 15N NMR spectroscopic investigation of the urea–formaldehyde resin synthesis

Urea–formaldehyde resins are bulk products of the chemical industry. Their synthesis involves a complex reaction network. The present work contributes to its elucidation by presenting results from detailed NMR spectroscopic studies with different methods. Besides¹H NMR and¹³C NMR,¹⁵N NMR spectroscopy is also applied.¹⁵N‐enriched urea was used for the investigations. A detailed NMR signal assignment and a model of the reaction network of the hydroxymethylation step of the synthesis are presented. Because of its higher spectral dispersion and the fact that all key reactions directly involve the nitrogen centers,¹⁵N NMR provides a much larger amount of detail than do¹H and¹³C NMR spectroscopy. Symmetric and asymmetric dimethylol urea can be clearly distinguished and separated from monomethylol urea, trimethylol urea, and methylene‐bridged urea. The existence of hemiformals of methylol urea is confirmed. 1,3,5‐Oxadiazinan‐4‐on (uron) and its derivatives were not found in the reaction mixtures investigated here but were prepared via alternative routes. The molar ratios of formaldehyde to urea were 1, 2, and 4, the pH values 7.5 and 8.5, and the reaction temperature 60 °C. Copyright © 2014 John Wiley & Sons, Ltd.     

First-principles simulations of the <Superscript>27</Superscript>Al and <Superscript>17</Superscript>O solid-state NMR spectra of the CaAl<Subscript>2</Subscript>Si<Subscript>3</Subscript>O<Subscript>10</Subscript> glass

The local and medium-range structure of the 20CaO·20Al₂O₃·60SiO₂ glass generated by classical molecular dynamics simulations has been compared to NMR experiments by computing the ²⁷Al and ¹⁷O NMR parameters and NMR spectra from first-principles simulations. The calculation of the NMR parameters (chemical shielding and quadrupolar parameters), which are then used to simulate solid-state MAS and 3QMAS NMR spectra, is achieved by the gauge including projector augmented-wave and the projector augmented-wave methods on the DFT-PBE relaxed structure. The NMR spectra calculated with the present approach are found to be in excellent agreement with the experimental data, providing an unambiguous view of the local and medium-range structure of aluminosilicate glasses.     

A 15N NMR investigation of some azolopyridines

¹⁵N NMR chemical shift data are presented for 14 azolopyridines, together with the results of INDO/S-SOS calculations of nitrogen shieldings. Previous ¹⁴N NMR results for some of these compounds are reinterpreted. The ¹⁴N data and their assignments are shown to be reliable for the indolizine nitrogen atom from arguments based on relative line widths. The pyridine-type nitrogens are more reliably assigned from the ¹⁵N spectra combined with the results of the INDO/S-SOS calculations for individual molecules. A combination of ¹⁴N and ¹⁵N NMR spectra, together with the shielding calculations, provides a basis for unambiguous assignments of all the various nitrogen environments considered.