Two alkali metal chlorites,LiClO2 and KClO2

The structures of tetragonal (P4₂/ncm) lithium chlorite, LiClO₂, and orthorhombic (Cmcm) potassium chlorite, KClO₂, have been determined by single‐crystal X‐ray analyses. In LiClO₂, the Li atom is at a site of symmetry, while in KClO₂, the K atom is at a site with 2/m symmetry. In both compounds, the unique Cl and O atoms are at sites with mm and m symmetry, respectively. The structure of LiClO₂ consists of layers of Li⁺ cations coordinated by ClO₂⁻ anions. In contrast, the structure of KClO₂ contains pseudo‐layers of K⁺ and ClO₂⁻ ions containing four short K—O distances. The Li⁺ and K⁺ cations are surrounded by four and eight chlorite O atoms in tetrahedral and distorted cubic coordination environments, respectively.     

An energy-resolved study of the fragmentation of ionized 1-Penten-3-ol

A detailed energy-resolved study of the fragmentation of CH₂?CHCH(OH)CD₂CD₃ (1-d₅) has been carried out using metastable ion studies and charge exchange techniques, combined with collision-induced dissociation studies to establish the structures of fragment ions. At low internal energies (metastable ions) the molecular ion of 1-d₅ rearranges to the 3-pentanone structure and fragments by loss of C₂H₅ or C₂D₅ leading to the acyl structure, [CH₃CH₂C?O]⁺ or [CD₃CD₂C?O]⁺, for the fragment ion. However, with increasing internal energy of the molecular ion this rearrangement process decreases rapidly in importance and loss of C₂D₅ by direct cleavage, leading to [CH₂?CHCH?OH]⁺, becomes the dominant fragmentation reaction. As a result the [C₃H₅O]⁺ ion seen in the electron impact mass spectrum of 1-penten-3-ol has predominantly the protonated acrolein structure.     

Polyelectrolyte-like behavior of polyethylene oxide/LiClO4 mixture in chloroform or chloroform/dimethylformamide mixed solvent

Lithium perchlorate (LiClO₄) was dissolved in dehydrated chloroform with polyethylene oxides (PEO) having different molecular weights. The mixing ratio of ether oxygen unit (? O? ) of PEO to cation (Li⁺) was set to 20:1. The solution viscosity of the PEO/LiClO₄ mixtures was measured using an Ubbelohde viscometer at 30.0°C. The concentration dependence of the reduced viscosity was analyzed by diluting the initial PEO/LiClO₄ mixed solution with pure chloroform to keep the ratio of ? O? to Li⁺ constant. The increase in the reduced viscosity for a dilute solution was found in every mixture system, but not in the PEO solution without salt. Similar experiments were also carried out in chloroform/dimethylformamide (DMF) mixed solvent (4:1 by volume). These results were analyzed using the Fuoss equation, which was applied for the analysis of a polyelectrolyte aqueous solution. Linear relations are depicted in the Fuoss plots, suggesting that the PEO/LiClO₄ mixture shows polyelectrolyte-like behavior in chloroform or in chloroform/DMF mixed solvent. This is attributed to the intramolecular electrostatic repulsion of lithium cations which are trapped by the PEO chains through ion–dipole interaction.     

Using Diffusion NMR To Characterize Guanosine Self‐Association: Insights into Structure and Mechanism

This paper presents results from a series of pulsed field gradient (PFG) NMR studies on lipophilic guanosine nucleosides that undergo cation‐templated assembly in organic solvents. The use of PFG‐NMR to measure diffusion coefficients for the different aggregates allowed us to observe the influences of cation, solvent and anion on the self‐assembly process. Three case studies are presented. In the first study, diffusion NMR confirmed formation of a hexadecameric G‐quadruplex [G 1 ]₁₆ ? 4 K⁺ ? 4 pic^? in CD₃CN. Furthermore, hexadecamer formation from 5′‐TBDMS‐2′,3′‐isopropylidene G 1 and K⁺ picrate was shown to be a cooperative process in CD₃CN. In the second study, diffusion NMR studies on 5′‐(3,5‐bis(methoxy)benzoyl)‐2′,3′‐isopropylidene G 4 showed that hierarchical self‐association of G₈‐octamers is controlled by the K⁺ cation. Evidence for formation of both discrete G₈‐octamers and G₁₆‐hexadecamers in CD₂Cl₂ was obtained. The position of this octamer–hexadecamer equilibrium was shown to depend on the K⁺ concentration. In the third case, diffusion NMR was used to determine the size of a guanosine self‐assembly where NMR signal integration was ambiguous. Thus, both diffusion NMR and ESI‐MS show that 5′‐O‐acetyl‐2′,3′‐O‐isopropylidene G 7 and Na⁺ picrate form a doubly charged octamer [G 7 ]₈ ? 2 Na⁺ ? 2 pic^? 9 in CD₂Cl₂. The anion's role in stabilizing this particular complex is discussed. In all three cases the information gained from the diffusion NMR technique enabled us to better understand the self‐assembly processes, especially regarding the roles of cation, anion and solvent.     

Complexation thermodynamics of some alkali-metal cations with 1,13-bis(8-quinolyl)-1,4,7,10,13-pentaoxatridecane in Acetonitrile

The interaction of 1,13-bis(8-quinolyl)-1,4,7,10,13-pentaoxatridecane (Kryptofix5) with alkali-metal cations (Li⁺, Na⁺, K⁺) in aprotic medium (acetonitrile) has been investigated. Conductance measurements demonstrated that 1:1 metal cation:ligand stoichiometries are found with these cations in this solvent. ⁷Li and ²³Na NMR experiments were carried out by titration of the metal cation solutions with Kryptofix5 solution in CD₃CN + CH₃CN at 298 K. Thermodynamic parameters of complexation for this ligand and alkali-metal cations in acetonitrile at 278–308 K were derived from titration conductometry. The highest stability is found for sodium complex. The complexation sequence, based on the value of log K at 278–308 K was found to be Na⁺ > K⁺ > Li⁺.     

Relationship between the Physicochemical Properties of Electrolytes and the Electronic Structure of Solvated Alkali Metal Cations

Group theoretical analysis and linear combinations of molecular orbitals of the cation and solvent are used to establish the nature and stability of bonds and hence the electric mobility of the cation and the viscosity of the electrolyte depending on the type of cation (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺) and molecules (H₂O, NH₃, H₂CO, (CH₃)₂CO, CH₃CN). Solvation effects on the UV photoelectron and intramolecular vibrational IR and NMR spectra are revealed.     

Poly(ethylene oxide)/poly(2vinylpyridne)/lithium perchlorate blends as solid polymer electrolytes: Composition/property/structure interrelationship

Poly(ethylene oxide) (MW 600,000)/poly(2vinylpyridine) (MW 200,000)/LiClO₄ blends have been prepared by the solution blending process. The ionic conductivities of the blends containing lower weight fractions (15, 17.5, 20 and 22.5%) of poly (2vinylpyridine) initially increases as the salt content is increased, reaches a maximum at an ethylene oxide/Li⁺ mole ratio of 10 and decreases as the salt content is further increased. Blends, which have higher weight fractions of poly(2vinylpyridine) (25 and 35%) display different electric behavior, i.e., the ionic conductivity continously increased as the salt content is increased to an ethylene oxide/Li⁺ mole ratio of 2. Thermal, ⁷Li solidstate NMR and semiempirical MNDO molecular orbital studies indicate that this contrasting behavior may be explained by the structure and ratios of the solvates (mixed solvate or homosolvate) of LiClO₄ present in the blends. © 1995 John Wiley & Sons, Inc.     

Aggregation Effects in Visible‐Light Flavin Photocatalysts: Synthesis,Structure, and Catalytic Activity of 10‐Arylflavins

A series of 10‐arylflavins (10‐phenyl‐, 10‐(2′,6′‐dimethylphenyl)‐, 10‐(2′,6′‐diethylphenyl)‐, 10‐(2′,6′‐diisopropylphenyl)‐, 10‐(2′‐tert‐butylphenyl)‐, and 10‐(2′,6′‐dimethylphenyl)‐3‐methylisoalloxazine ( 2 a – f )) was prepared as potentially nonaggregating flavin photocatalysts. The investigation of their structures in the crystalline phase combined with ¹H‐DOSY NMR spectroscopic experiments in CD₃CN, CD₃CN/D₂O (1:1), and D₂O confirm the decreased ability of 10‐arylflavins 2 to form aggregates relative to tetra‐O‐acetyl riboflavin ( 1 ). 10‐Arylflavins 2 a – d do not interact by π–π interactions, which are restricted by the 10‐phenyl ring oriented perpendicularly to the isoalloxazine skeleton. On the other hand, N3? H???O hydrogen bonds were detected in their crystal structures. In the structure of 10‐aryl‐3‐methylflavin ( 2 f ) with a substituted N3 position, weak C? H???O bonds and weak π–π interactions were found. 10‐Arylflavins 2 were tested as photoredox catalysts for the aerial oxidation of 4‐methoxybenzyl alcohol to the corresponding aldehyde (model reaction), thus showing higher efficiency relative to 1 . The quantum yields of 4‐methoxybenzyl alcohol oxidation reactions mediated by arylflavins 2 were higher by almost one order of magnitude relative to values in the presence of 1 .     

The effect of pressure and temperature of self-diffusion coefficients in several concentrated deuterium oxide diamagnetic electrolyte solutions

The pressure dependences of the self-diffusion coefficients of deuterium oxide in 4.5m solutions of LiCl–D₂O and CsCl–D₂O (also 7m) and 3.06m CaCl₂–D₂O have been measured by the NMR spin-echo method at 30°C, 60°C, and 90°C. Shear viscosities and densities of these solutions have also been determined over the same range of experimental conditions. The experimental data show that the diffusion constantD decreases with the increasing structure-making ability of the electrolyte cation Ca⁺²>Li⁺. In contrast, the diffusion coefficient for D₂O in the 4.5 and 7m CsCl solutions is equal to that for pure D₂O at 30°C but lower at 60°C and 90°C. It has been found that the Stokes-Einstein equation relates well the diffusion coefficients to shear viscosity in these concentrated electrolyte solutions.     

Ionic conductivity of complexes of novel multiarmed polymers with phosphazene core and LiClO4

Novel multiarmed polymers with ethylene oxide units, [( CH₂CH₂O)_n : 7, n = 3; 8, n= 7.2; 9, n = 11.8, and 12, n = 11.8] were prepared from the reaction of polyethylene glycol monomethyl ethers with acid chlorides of hexakis(3,5-dicarboxyphenoxy)-( 6 ) and hexakis(4-carboxyphenoxy)cyclotriphosphazenes ( 11 ) and conductivities of their Li⁺ salt complexes were investigated. The glass transition temperatures of the salt-free polymers are in the temperature range −59 to −54°C, indicative of a high degree of reorientational mobility of the arms. When LiClO₄ was added to the multiarmed polymers, the T_g values raised monotonically. The extent of T_g elevation was affected by the length of arms and the number of oxygen atoms around cyclotriphosphazene core and increased in the order 7 > 8 > 12 > 9 . The conductivities increased in the order 9 > 8 = 12 > 7 and the maximum conductivities of 4.0 × 10⁻⁵ S/cm at 30°C and 6.0 × 10⁻⁴ S/cm at 90°C have been achieved for the 9 -Li⁺ complex with Li⁺/O = 0.03. Interestingly, the conductivity of 9 -Li⁺ complexes at constant reduced temperatures increased in the whole concentrations of LiClO₄ examined (Li⁺/O = 0.01–0.2), although the degree of increase in conductivity above Li⁺/O = 0.06 became small. From the behaviors of T_g and the conductivity of multiarmed polymer–LiClO₄ complexes, it appears that the conductivity is governed by relative concentrations of inter- and intramolecular complexes in the polymer matrix. The influence of structural change of the comb-shaped to multiarmed polymers on the conductivity is described. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1839–1847, 1997     

Conductivity and characterization of polyurea electrolytes with carboxylic acid

Polyurea, which was synthesized from 4,4′‐diphenylmethane diisocyanate, Jeffamine‐ED2001 (weight‐average molecular weight: 2000), and 3,5‐diaminobanzoic acid (DABA) were doped with lithium perchlorate (LiClO₄) as the polyelectrolyte. Differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, and ⁷Li magic‐angle spinning (MAS) solid‐state NMR were used to monitor changes in the morphology of polyurea electrolytes corresponding to the concentration of LiClO₄ dopants. DSC showed the glass‐transition temperature of the hard and soft segments increases with salt concentration. FTIR indicated the carboxylic group of DABA coordinates with the Li⁺ ion, and the ordered hydrogen‐bonded urea carbonyl groups are destroyed when the salt concentration exceeds 0.5 mmole of LiClO₄ (gPUrea)^?1. The ⁷Li MAS solid‐state NMR investigation of the polyurea electrolytes revealed the presence of two Li⁺ environments at lower temperature. Impedance spectroscopy measurements showed that the conductivity behavior followed the Arrhenius equation, and the maximum conductivity occurred when the crystalline structure of polyurea was disrupted. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 4007–4016, 2003     

Sub-TG relaxations in LiClO4-poly (propylene glycol)-2000 solutions

The dielectric permittivity and loss of LiClO₄ solutions in poly (propylene glycol (PPG)), molecular weight 2000, have been measured over a concentration range up to a ratio of Li⁺ to oxygen atoms in PPG of 33.3:100, between 77 and 350 K. The data have been analyzed in both the permittivity and electrical modulus formalisms. Addition of LiClO₄ to poly (propylene glycol) first increases the height of the β-relaxation peak, and ultimately a second sub-T_g relaxation peak at a higher temperature emerges. This is in addition to the β-relaxation peak due to the reorientation of PPG dipoles, whose strength decreases from that in pure PPG-2000. For a fixed temperature, the dc conductivity initially decreases with increasing Li⁺ concentration up to 20 Li⁺ per 100 O atoms and thereafter increases. This concentration corresponds to that at which the T_g of the solution reaches its limiting value of ca. 310 K. It is concluded that the formation of ion pairs causes a second and slower sub-T_g relaxation process and that the increase in the efficiency of chain packing reduces the strength of the β-relaxation of the polymer.     

An analysis of the total ion-solvent encounter configuration of ClO 4 − and BF 4 − with Na+ and Li+ in water,studied by various nuclear magnetic relaxation times. Part 21

Proton relaxation rates of the solvent water in NaClO₄, NaBF₄, LiClO₄, and NiBF₄ solutions together with some self-diffusion coefficients are reported and interpreted in terms of structure-breaking effects.¹⁹F relaxation rates in⁷LiBF₄ and⁶LiBF₄ solutions in D₂O have been measured, and the relaxation contribution caused by⁷Li⁺ has been evaluated to give a cation-anion model pair distribution function.⁷Li relaxation rates in H₂O and D₂O are also reported, and conclusions concerning the hydration structure of Li⁺ have been drawn. The strong relaxation effects caused by the ions BF ₄ ^– and ClO ₄ ^– on²³Na⁺ and⁷Li⁺ have been subjected to a detailed analysis, and combined ion-solvent encounter configurations are presented which yield an electric field gradient strong enough to cause the observed effect.Part 1 was presented at the Faraday Discussion Ion-Ion and Ion-Solvent Interaction, Oxford, September 1977 (see ref. 1).     

Complexation Studies of Phosphorus Containing Bis and Tris (Benzocrown Ether) Moieties

The complexation behaviour between salts of Li⁺-Rb⁺ in CD₃CN and tris(benzocrown ether)s 2a,bX=P(NMeN=CH-B15C5)₃ (X = O, S) and tri[bis(benzocrown ether)][N=P(NMeN=CH-B15C5)₂]₃ 3 was investigated by ¹³ C NMR spectroscopy. Using the program RMNSTAB, the complexation constants for the different possible complexes (M₂L, ML andML₂ were L represents one benzo-15-crown-5) were obtained and were compared with those of the corresponding monomer material. A remarkable ``biscrown effect' for compounds 2a,b and 3 was found, especially for potassium and rubidium by the predominant formation of stable ML₂ complexes. The strong chelate effect make these ligands highly efficient extracting agents for alkali metal picrate salts of K⁺, Rb⁺ and Cs⁺,as shown by UV-Vis spectroscopy.     

Zur Kristallstruktur von Li8PbO6 [1]

On the Structure of Li₈PbO₆ For the first time single crystals of Li₈PbO₆ have been prepared by heating of mixtures of Na₂PbO₃ and Li₂O [Ag-cylinders, 650°C, 150 d]. The structure [382 I₀(hkl), four circle diffractometer PW 1100, ω/2Θ-scan, MoKα, R = 3.07%, R_w = 3.00%, space group R3 ; a = 555.09(4), c = 1564.13(17) pm, D_x = 4.28 g · cm^?3, D_pyk = 4.24 g · cm^?3, Z = 3] is characterized by the motive of a hexagonal-closed O^2? packing. Half of the octahedral sites are occupied by Pb⁴⁺ and Li⁺ and half of the tetrahedral sites only by Li⁺. The Madelung Part of Lattice Energy, MAPLE, and the Effective Coordination Numbers, ECoN, these via Mean Fictive Ionic Radii, MEFIR, are calculated.     

The nature of the bonding of Li+ to H2O and NH3; A3 initio studies

Ab initio wavefunctions have been calculated for the complex of Li⁺ with NH₃ and H₂O in order to better characterize the nature of the bonding. Hartree—Fock and generalized valence bond calculations were performed using a double zeta basis plus polarization functions. The binding energies obtained at the GVB level are D_e (Li⁺ — NH₃) = 40.4 kcal/mol and D_e (Li⁺ ? H₂O) = 37.6 kcal/mol, in reasonable agreement with experimental values. Model calculations indicate that the Li⁺ ? base bond is basically electrostatic. Small basis sets were found to lead to D_e as large as 75 kcal/mol for Li⁺ — NH₃, a significant overestimation. Repulsions due to the Li⁺ core are responsible for keeping the Li⁺ too far away for significant relaxation effects.     

On-column infrared monitoring for reversed phase liquid chromatography with deuterated solvents

Infrared monitoring was accomplished in reversed phase HPLC on using deuterated solvents. The end of a micro HPLC column was flattend and used as a flow cell for on-column IR detection. Detection of alkylbenzenes and oil-soluble vitamins which were separeted on ODS packing with CD₃CN/D₂O and CD₃OD, respectively, was performed at 2940 cm^?1.     

Quasiclassical Trajectory Study of the Reaction of CD4 with O(1D)

Extensive quasiclassical trajectory calculations for the O(¹D)+CD₄ multichannel reaction were carried out on a new global potential energy surface fit by permutationally invariant polynomials. The product branching ratios, translational energy distributions, and angular distributions of OD+CD₃, D+CD₂OD/CD₃O, and D₂+DCOD/D₂CO product channels were calculated and compared with the available experimental results. Good agreement between theory and experiment has been achieved, indicating small isotope effects for the title reaction. The O(¹D)+CD₄ reaction mainly proceeds through the CD₃OD intermediate via the trapped abstraction mechanism, with initial abstraction of the D atom rather than the direct insertion, followed by decomposition of CD₃OD into various products.     

Recyclizations of 2‐aminobenzylimines and thioaroylhydrazones of N‐substituted N‐hydroxy‐3‐oxobutanamides

A universal scheme is proposed for the molecular design of heterocyclic recyclizations by replacing the exocyclic hydroxyl groups in exo‐trig‐ ring‐chain tautomeric molecules with substituted amines or hydrazines. The practical applicability of this approach is demonstrated by the condensations of 5‐hydroxy‐5‐methyl‐3‐isoxazolidinones with thioaroyl‐hydrazines and 2‐aminomethylaniline. The condensation products were studied by modern ¹H, ¹³C and ¹⁵N NMR spectroscopic methods using three solvents: CDC1₃, DMSO[D₆] and CD₃CN. The solvent was found to have a strong effect to the relative amounts of the tautomers.     

Poly(triazine imide) with intercalation of lithium and chloride ions [(C3N3)2(NH(x)Li(1-x))3⋅LiCl]: a crystalline 2D carbon nitride network

Poly(triazine imide) with intercalation of lithium and chloride ions (PTI/Li⁺Cl^?) was synthesized by temperature‐induced condensation of dicyandiamide in a eutectic mixture of lithium chloride and potassium chloride as solvent. By using this ionothermal approach the well‐known problem of insufficient crystallinity of carbon nitride (CN) condensation products could be overcome. The structural characterization of PTI/Li⁺Cl^? resulted from a complementary approach using spectroscopic methods as well as different diffraction techniques. Due to the high crystallinity of PTI/Li⁺Cl^? a structure solution from both powder X‐ray and electron diffraction patterns using direct methods was possible; this yielded a triazine‐based structure model, in contrast to the proposed fully condensed heptazine‐based structure that has been reported recently. Further information from solid‐state NMR and FTIR spectroscopy as well as high‐resolution TEM investigations was used for Rietveld refinement with a goodness‐of‐fit (χ²) of 5.035 and wRp=0.05937. PTI/Li⁺Cl^? (P6₃cm (no. 185); a=846.82(10), c=675.02(9) pm) is a 2D network composed of essentially planar layers made up from imide‐bridged triazine units. Voids in these layers are stacked upon each other forming channels running parallel to [001], filled with Li⁺ and Cl^? ions. The presence of salt ions in the nanocrystallites as well as the existence of sp²‐hybridized carbon and nitrogen atoms typical of graphitic structures was confirmed by electron energy‐loss spectroscopy (EELS) measurements. Solid‐state NMR spectroscopy investigations using ¹⁵N‐labeled PTI/Li⁺Cl^? proved the absence of heptazine building blocks and NH₂ groups and corroborated the highly condensed, triazine‐based structure model.