On the microelectrode behaviour of graphite–epoxy composite electrodes

Electrodes fashioned from conducting particles embedded in insulating binder show some properties commonly associated with arrays of microelectrodes, viz. independence of current from convective flow and sigmoidal current–voltage curves. We have systematically investigated the electrochemical behaviour of a range of composite formulations. The fraction of the surface area that is conducting and the size of the conducting features have been quantified using the novel technique of conducting atomic force microscopy (C-AFM). We have shown that flow sensitivity and voltammetric behaviour are correlated with results from the C-AFM. The more dilute formulations behave like arrays of microelectrodes, though exhibiting large time constants. The origin of this behaviour is discussed.     

A study of the extraction of plutonium from planchets by Aridus–ICP–SFMS

Two extraction processes of plutonium (Pu) on planchets from alpha spectrometry (AS) have been evaluated by inductively coupled plasma sector field mass spectrometry with a desolvator system (Aridus–ICP–SFMS). The samples were traced with known concentrations of ²³⁹Pu (1.2 × 10³ fg) and ²⁴²Pu (2 × 10³ fg) followed by an electrodeposition in planchets, according to the Hallstadius method. The processes of extraction were carried out with 50 mL of 0.36 mol L^?1 HNO₃ every 30 min up to 180 min in a glass beaker at 60 °C. The first process was on a hotplate and the second used an ultrasonic system. Finally, samples were evaporated to dryness, and resuspended in 10 mL of 0.72 mol L^?1 HNO₃ for evaluation. The results showed that at 120 min, a ~70 % recovery of ²³⁹Pu and a ~80 % recovery of ²⁴²Pu in both processes were obtained. The average recoveries of ²³⁹Pu and ²⁴²Pu at 180 min using the hotplate in plate were 93.4 ± 4.6 and 93.7 ± 4.2 % respectively, and with the ultrasonic system were 96.0 ± 4.3 and 98.2 ± 1.0 % respectively. In conclusion, both processes are suitable for Pu extraction, and Aridus–ICP–SFMS is an essential technique for the reassessments and quantification of Pu. In addition, procedural blanks spiked with 1 × 10² fg mL^?1 U were prepared for each process, in order to study the contribution of the ²³⁸U on the background signal at m/z = 239, which was 0.5 ± 0.2 cps, indicating that the contribution of ²³⁸U on the ²³⁹Pu signal was negligible. Furthermore, this methodology can be applied to sample planchets with environmental, food, biological and nuclear origin, and thereby to avoid repetitive analysis when Pu concentration determined by AS are under minimum detectable activities.     

Corroborating study on the absolute configurations of trigochinins A–C

Trigochinins A–C (1–3) are three highly oxygenated daphnane-type diterpenes isolated from Trigonostemon chinensis. Their structures with the absolute configurations were initially assigned by a combination of spectroscopic data, X-ray crystallography (Mo Kα radiation) study and CD analysis. In the current study, the absolute configurations of trigochinins A–C were confirmed by single crystal X-ray diffraction (Cu Kα radiation) study, CD spectral analogy, and theoretical ECD study by using quantum chemical TDDFT calculations.     

The influence of polyoxypropylenetriamine on the properties of epoxy–thiokol mixtures

The influence of Jeffamine T-403 polyoxypropylenetriamine on the physico-mechanical, adhesion, and relaxation properties of polymeric compositions based on the products of preliminary thioesterification reaction of epoxy resin with liquid thiokol was studied. It was shown that the introduction of polyoxypropylenetriamine leads to a significant increase of the adhesive and cohesive strength, the elongation at break, and the work of destruction of the material.     

Catalytic curing of epoxy–anhydride binders under the action of azo compounds

Russian Journal of Applied Chemistry - A series of azo compounds were studied by differential scanning calorimetry as catalysts of the reaction of UP-643 epoxy–novolac resin with various...     

A novel exploration of metal–organic frameworks in flame-retardant epoxy composites

In this work, a series of transition metal–organic frameworks (MOFs) were prepared through self-assembly of organic bridging ligands and transition metal ions. The structure of MOFs samples was analyzed by XRD, FTIR, TG, and TEM. The influences of MOFs on flame resistance, toxicity reduction, and smoke suppression of epoxy were explored in detail. The findings presented that low addition amount of MOFs had a positive effect on decreasing the fire hazards of epoxy. Loading of 2 mass% MOFs into epoxy led to the decrease in thermal degradation rate and increase in char yields. Meanwhile, the values of peak heat release rate, total heat release, and average mass loss rate of epoxy composites were cut down effectively, in comparison with neat epoxy. Moreover, the remarkable decrease in smoke production rate, total smoke production, and CO, CO₂ yield could be provided by cone calorimeter test. The char residues after cone calorimeter test were investigated by SEM and Raman spectra, and the flame-retardant mechanism was discussed.

     

A study of the viscosity of phenol–formaldehyde resin modified with furfural–acetone monomer FA

The results of an evaluation of the relative and dynamic viscosities of phenol–formaldehyde resin modified with furfural–acetone monomer FA monomer are presented. That there is increasing viscosity of the modified adhesive composition is established due to the formation of polycomplexes, these being new supramolecular structures with increased dimensions of macromolecules of higher molecular mass.     

Influence of organic corrosion inhibitors on the corrosion performance of organic–inorganic hybrid coatings applied on aluminium alloy

The proposed work aims to develop and study sol–gel derived anticorrosion films for aluminium. To further improve performance of these films, organic corrosion inhibitors were incorporated into the films. The organic–inorganic hybrid films with and without corrosion inhibitors were deposited on an aluminium substrate by dip coating. The films were characterized by electrochemical impedance spectroscopy (EIS), DC polarisation techniques, and neutral salt spray test to evaluate their anticorrosion properties. This study shows that very low and very high MBT concentrations deteriorate the corrosion performance of coatings, and consequently, there is an optimum concentration of MBT. EIS results revealed a higher corrosion inhibitive activity of 2-mercaptobenzothiazole (MBT) compared to that of 2-amino-5-methylthiazole and 1,2,3 benzotriazole.     

A theoretical study of the copper–cysteine bond in blue copper proteins

 The accuracy of theoretical calculations on models of the blue copper proteins is investigated using density functional theory (DFT) Becke's three-parameter hybrid method with the Lee–Yang–Parr correlation functional (B3LYP) and medium-sized basis sets. Increasing the basis set to triple-zeta quality with f-type functions on all heavy atoms and enlarging the model [up to Cu(imidazole-CH₃)₂(SC₂H₅) (CH₃SC₂H₅)^0/+] has only a limited influence on geometries and relative energies. Comparative calculations with more accurate wave-function–based methods (second-order M?ller–Plesset perturbation theory, complete-active-space second-order perturbation theory, coupled-cluster method, including single and double replacement amplitudes and in addition triple replacement perturbatively) and a variety of basis sets on smaller models indicate that the DFT/B3LYP approach gives reliable results with only a small basis set dependence, whereas the former methods strongly depend on the size of the basis sets. The effect of performing the geometry optimizations in a continuum solvent is quite small, except for the flexible Cu-S_Met bond. The results of this study confirm the earlier results that neither the oxidized nor the reduced copper site in the blue proteins is strained to any significant degree (in energy terms) by the protein surrounding. Received: 7 July 2000 / Accepted: 17 November 2000 / Published online: 21 March 2001     

An arbitrary Lagrangian–Eulerian model for studying the influences of corrosion product deposition on bimetallic corrosion

In this paper, a model is established to simulate the time-dependent deposition of corrosion product on the metal surface by considering mass transfer, electrochemical reactions and precipitation reaction. The model is also capable of tacking the movement of metal corrosion interface and the growing interface of the corrosion product deposits via arbitrary Lagrangian–Eulerian finite element method. The current model not only can be used to predict the time-dependent metal corrosion but also for investigating the influences of the deposits’ nature on metal corrosion. The numerical results of current density and corrosion rate are in good agreement with experiments. The presented model predicts that an exponential relationship exists between the maximum corrosion depth and the porosity of corrosion product deposits, and it is also predicted that the growth of the corrosion product layer is linear relative with the root of time, which is consistent with the existing theories.     

Surface characterization and dissolution study of biodegradable calcium metaphosphate coated by sol–gel method

Coatings of biomedical implant surfaces by a bioactive calcium phosphate film render bioactivity to the implant surface and shorten the healing time. In this present study, calcium metaphosphate (CMP) sol was synthesized by sol–gel method and coated onto the titanium alloys (Ti-6Al-4V). CMP sol was first synthesized by reacting Ca(NO₃)₂4H₂O (Sigma–Aldrich 99%, USA) with (OC₂H₅)₃P (Fluka 97%, Japan) in methyl alcohol. A stoichiometric Ca/P ratio of 0.5 was obtained by varying the amounts of the reactants. Sol was then coated on Ti-6Al-4V substrates by spin coating. The coated-specimens were then dried at 70 °C for 24 h, followed by a heat treatment at 650 °C for 1 h. Structural and chemical properties of the coatings were evaluated using XRD, SEM, and EPMA. The dissolution property of the coated-CMP layer was investigated by immersing the samples in the simulated body fluid (SBF) for 1, 3, 7 and 21 days. The concentration of Ca²⁺ released was measured using ICP. After heat treatment, SEM indicated a smooth and uniform CMP layer, with CMP grains of approximately 100 nm. The CMP phase was identified with δ-CMP (JCPDS #9-363). After immersion in SBF, coatings were observed to be roughened and porous. The concentration of Ca²⁺ in SBF was observed to increase over time, indicating continuous dissolution. The presence of titanium oxide phosphate compounds were also observed on CMP surfaces after immersion. It was thus concluded that the ability to control coating properties as well as the need for low heat treatment temperature offers advance for the use of CMP coating by sol–gel process on Ti-6Al-4V implant surfaces.     

Comparative study on the inhibitive effect of Sulfadoxine–Pyrimethamine and an industrial inhibitor on the corrosion of pipeline steel in petroleum pipeline water

The corrosion inhibition characteristics of Sulfadoxine plus Pyrimethamine (S&P) was evaluated and compared with the inhibition performance of an industrial corrosion inhibitor (S-Ind) under anaerobic condition. Modified gravimetric and electrochemical techniques were used. The corrosion inhibition efficiencies of both S&P and S-Ind were comparable for all the techniques applied. S&P gave slightly higher inhibition efficiency, while S-Ind gave a more steady corrosion protection. The corrosion inhibition efficiencies increased with increased concentration of both substances. The polarization curves showed mixed inhibition behavior for both S&P and S-Ind. A mechanism of chemisorption was proposed for the adsorption of S&P and S-Ind on pipeline steel surface, while the negative Gibbs free energy of adsorption values indicates a spontaneous adsorption process. The adsorption characteristics of the inhibitors were fitted into Langmuir adsorption isotherm.     

A theoretical study of the lowest electronic states of azobenzene: the role of torsion coordinate in the cis–trans photoisomerization

In the present paper we report the results of a multiconfigurational computational study on potential-energy curves of azobenzene along the NN twisting to clarify the role of this coordinate in the decay of the S₂(*) and S₁(n*) states. We have found that there is a singlet state, S₃ at the trans geometry, on the basis of the doubly excited configuration n²*², that has a deep minimum at about 90° of twisting, where it is the lowest excited singlet state. The existence of this state provides an explanation for the short lifetime of S₂(*) and for the wavelength-dependence of azobenzene photochemistry. We have characterized the S₁(n*) state by calculating its vibrational frequencies, which are found to correspond to the recently observed transient Raman spectrum. We have also computed the potential-energy curve for the triplet T₁(n*) at the density functional theory B3LYP level, which indicates that in this state the isomerization occurs along the twisting coordinate.Acknowledgement The financial support from MIUR (project Modellistica delle proprietà spettroscopiche di sistemi molecolari complessi funds ex 60% and project Dinamiche molecolari in sistemi di interesse chimico funds ex 40%), from the University of Bologna (Funds for Selected Research Topics) is gratefully acknowledged.Contribution to the Jacopo Tomasi Honorary Issue