Separation and determination of saturated very-long-chain free fatty acids in plasma of patients with adrenoleukodystrophy using solid-phase extraction and high-performance liquid chromatographic analysis

An improved method was developed for the isolation of very-long-chain free fatty acids (VLCFFAs) in plasma and their separation and determination by high-performance liquid chromatography (HPLC). The method includes sample clean-up using solid-phase extraction, fluorophoric labelling of the FFAs and reversed-phase HPLC separation. The solid-phase extraction was carried out with aminopropyl-bonded phase columns. The FFAs were then derivatized with 9-anthryldiazomethane (fluorescent) reagent and separated by HPLC on an RP-18 column with methanol as the mobile phase. Using this method, the concentrations of C20:0, C22:0, C24:0 and C26:0 were determined in the plasma of five adrenoleukodystrophy (ALD) patients, one obligatory heterozygote, four healthy male volunteers and one child with cerebral leukodystrophy but without any other ALD symptoms. Statistically significant differences were found in the levels of C24 and C26 and in the ratios C24/C22 and C26/C22 in ALD patients and in normal controls. The values were higher in patients with X-ALD. This method therefore provides a rapid and accurate procedure for the laboratory confirmation of X-ALD.     

25-Hydroxycholesterol-Induced Oxiapoptophagy in L929 Mouse Fibroblast Cell Line

25-hydroxycholesterol (25-HC) is an oxysterol synthesized from cholesterol by cholesterol-25-hydroxylase during cholesterol metabolism. The aim of this study was to verify whether 25-HC induces oxiapoptophagy in fibroblasts. 25-HC not only decreased the survival of L929 cells, but also increased the number of cells with condensed chromatin and altered morphology. Fluorescence-activated cell sorting results showed that there was a dose-dependent increase in the apoptotic populations of L929 cells upon treatment with 25-HC. 25-HC-induced apoptotic cell death was mediated by the death receptor-dependent extrinsic and mitochondria-dependent intrinsic apoptosis pathway, through the cascade activation of caspases including caspase-8, -9, and -3 in L929 cells. There was an increase in the levels of reactive oxygen species and inflammatory mediators such as inducible nitric oxide synthase, cyclooxygenase-2, nitric oxide, and prostaglandin E2 in L929 cells treated with 25-HC. Moreover, 25-HC caused an increase in the expression of beclin-1 and microtubule-associated protein 1A/1B-light chain 3, an autophagy biomarker, in L929 cells. There was a significant decrease in the phosphorylation of protein kinase B (Akt) in L929 cells treated with 25-HC. Taken together, 25-HC induced oxiapoptophagy through the modulation of Akt and p53 cellular signaling pathways in L929 cells.     

Genome-wide identification of age-related CpG sites for age estimation from blood DNA of Han Chinese individuals

Age-related CpG (AR-CpG) sites are currently the most promising molecular markers for forensic age estimation. However, the AR-CpG sites of Han Chinese population remains to be systematically characterized. In this study, we performed genome-wide methylation analyses on 42 whole blood DNA from healthy Han Chinese volunteers (aged from 18 to 62 years) using the Illumina MethylationEPIC BeadChip microarray. As expected, both known and novel AR-CpG sites were identified. Considering the sex difference in aging rate, we then separately selected AR-CpG candidates and built pyrosequencing-based multiple linear regression models for age estimation of males and females. The model constructed from the male sample group (n = 167, aged from 1.50 to 85.71 years) explained 95.22% of variation in age using five AR-CpG sites (chr6:11044864 ELOVL2, chr1:207997068 C1orf132, cg19283806 CCDC102B, cg17740900, and chr10:73740306 CHST3) and yielded a mean absolute error (MAE) of 2.79 years. The model constructed from the female sample group (n = 141, aged from 3.33 to 80.38 years) explained 94.90% of variation in age with six AR-CpG sites (chr6:11044867 ELOVL2, chr1:207997060 C1orf132, chr2:106015757 FHL2, cg26947034, chr16: 67184108 B3GNT9, and chr20:44658203 SLC12A5) and yielded an MAE of 2.53 years. Besides, the estimated age was highly correlated with the actual age (R > 0.97). The robustness of these AR-CpG markers was demonstrated by 10-fold cross-validations. In conclusion, we updated the AR-CpG sites of Han Chinese population and provided two sets of AR-CpG sites for accurate age estimation.     

Physical factors determining the activation energy of alkyl radical addition to unsaturated compounds

A parabolic model of the transition state is used for the analysis of experimental data (rate constants and activation energies) for reactions of addition of alkyl and phenyl radicals to multiple bonds of unsaturated compounds. The parameters describing the activation energy as a function of the enthalpy of the reactions were calculated from the experimental data. The activation energy depends also on the strength of the forming C−C bond, the presence of π-bonds in the α-position near the attacked C=C bond and the presence of polar groups in the monomer and radical. The empirical dependence of the activation energy of a thermoneutral addition reactionE _e0 on the dissociation energyD _e of the forming C−C bond was obtained:E _e0=(5.95±0.06)·10⁻⁴ D _e ² kJ mol⁻¹, indicating the important role of triplet repulsion in the formation of the transition state of radical addition. The contribution of the polar interaction to the activation energy of addition of polar radicals to polar monomers was calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 445–450, March, 1999.     

Temperature‐dependent desorption of surfactants in LLDPE blend films

The temperature‐dependent desorption behavior of surfactants in linear low‐density polyethylene (LLDPE) blend films was studied with Fourier transform infrared spectroscopy at 25, 40, and 50 °C. The LLDPE/low‐density polyethylene blend was 70/30. Three different specimens (labeled II, III, and IV) were prepared with various compositions of the surfactant, sorbitan palmitate (SPAN‐40), and the migration controller, poly(ethylene acrylic acid) (EAA). The calculated diffusion coefficients of SPAN‐40 in specimens II, III, and IV at 25, 40, and 50 °C varied from 9.6 × 10⁻¹² to 17.4 × 10⁻¹² cm²/s, from 5.5 × 10⁻¹² to 11.0 × 10⁻¹² cm²/s, and from 3.1 × 10⁻¹² to 5.8 × 10⁻¹² cm²/s, respectively. In addition, the activation energies of specimens II, III, and IV measured between 25 and 50 °C were 18.74, 19.42, and 20.14, respectively. Hence, the desorption rate of the surfactant increased with the temperature and decreased with an addition of EAA, but the activation energy increased with EAA. The diffusion kinetics, analyzed with a plot of the integrated intensity ratio as a function of time, log(I_t/I_∞) versus log t, at 25, 40, and 50 °C obeyed Fickian diffusion behavior. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 218–227, 2001     

Artabotryols A – E,New Lanostane Triterpenes from the Seeds of Artabotrys odoratissimus

Six new lanostane triterpenes, artabotryols A, B, C1, C2, D, and E ( 1, 2, 3a, 3b, 4 , and 5 , resp.) have been isolated from the seeds of Artabotrys odoratissimus (Annonaceae). Their structures have been established as (3α,22S,25R)‐3‐hydroxy‐22,26‐epoxylanost‐8‐en‐26‐one ( 1 ), (3α,22S,25R)‐22,26‐epoxylanost‐8‐ene‐3,26‐diol ( 2 ), (3α,22S,25R,26R)‐26‐methoxy‐22,26‐epoxylanost‐8‐en‐3‐ol ( 3a ), (3α,22S,25R, 26S)‐26‐methoxy‐22,26‐epoxylanost‐8‐en‐3‐ol ( 3b ), (3α,22S,25R)‐3,22‐dihydroxylanost‐8‐en‐26‐oic acid ( 4 ) and (3α,7α,11α,22S,25R)‐3,7,11‐trihydroxy‐22,26‐epoxylanost‐8‐en‐26‐one ( 5 ) by spectroscopic studies and chemical correlations.     

Change of Lipid Composition of Mucor miehei as a Function of Cultivation Temperature

Lipids of the thermophilic fungus Mucor miehei,strain UzLT-3, cultivated at 26 and 42 C are studied. The lipids of this strain contain isomeric 18:2 (9,12) and (6,9) fatty acids and polyene acids - and -18:3, which are uncharacteristic of thermophilic fungi. Cultivation at 26°C increases the fraction of phospholipids (PL), glycolipids (GL), and isomeric 18:3 fatty acids in the total lipids. It is hypothesized that the liquid-crystalline state of the membranes of this strain at reduced temperature are due to activation of desaturases ¹² and ¹⁵ and possibly ⁶ , which are present in the fungus and participate in the biosynthesis of unsaturated acyl lipids.     

Efficient and Reusable Iron Catalyst to Convert CO2 into Valuable Cyclic Carbonates

The production of cyclic carbonates from CO₂ cycloaddition to epoxides, using the C-scorpionate iron(II) complex [FeCl₂{κ³-HC(pz)₃}] (pz = 1H-pyrazol-1-yl) as a catalyst, is achieved in excellent yields (up to 98%) in a tailor-made ionic liquid (IL) medium under mild conditions (80 °C; 1–8 bar). A favorable synergistic catalytic effect was found in the [FeCl₂{κ³-HC(pz)₃}]/IL system. Notably, in addition to exhibiting remarkable activity, the catalyst is stable during ten consecutive cycles, the first decrease (11%) on the cyclic carbonate yield being observed during the 11th cycle. The use of C-scorpionate complexes in ionic liquids to afford cyclic carbonates is presented herein for the first time.     

Fluorene copolymers containing bithiophene/2,5‐ or 2,6‐pyridine units: A study of their optical,electrochemical, and electroluminescence properties

Two alternating copolymers, poly[(2,5‐di(2‐thienyl)‐pyridine‐5,5′‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)], PFO‐TPy25T, and poly[(2,6‐di(2‐thienyl)‐pyridine‐5,5′‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)], PFO‐TPy26T, were synthesized by the Pd‐catalyzed Suzuki polymerization method. The pyridine units are present as trimeric monomers in these copolymers and have different connectivities to their two neighboring thiophenes, para‐ and meta‐linkages. We investigated the variations in the optical and electrochemical properties of the copolymers that arise from these different connectivities. The two polymers exhibit 5% weight loss above 410 °C and high glass transition temperatures (T_g: 113 °C for PFO‐TPy25T, 142 °C for PFO‐TPy26T). The UV–vis absorption maximum peaks of PFO‐TPy25T and PFO‐TPy26T in the solid state were found to be 449 and 398 nm respectively, with photoluminescence maximum peaks in the solid state of 573 and 490 nm respectively. Using cyclic voltammetry, we determined their energy band gaps: 3.08 eV for PFO‐TPy25T and 3.49 eV for PFO‐TPy25T. The cyclic voltammetry study of these polymers revealed that there are some differences. The electroluminescence (EL) properties of the copolymers were measured for the device configuration of ITO/PEDOT/polymers/Ca/Al. The device fabricated with the polymer containing 2,5‐pyridine exhibits pale orange emission, whereas the device fabricated with the polymer containing 2,6‐pyridine exhibits pale blue emission. The EL device fabricated with PFO‐TPy25T has a higher brightness (2010 cd/m²) and external quantum efficiency (0.1%) than the PFO‐TPy26T device (260 cd/m², 0.008%), because it has a smaller energy barrier to the injection of charges from PEDOT and Ca into the HOMO and LUMO levels. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4611–4620, 2006     

Zur Konfiguration des Vitamin-D3-Metaboliten 25, 26-Dihydroxycholecalciferol: Synthese von (25S,26)- und (25R,26)-Dihydroxycholecalciferol

Configuration of the Vitamin-D₃-Metabolite 25,26-Dihydroxycholecalciferol: Synthesis of (25S,26)- and (25R,26)-Dihydroxycholecalciferol For selective synthesis of the title compounds, (25S)- 1b and (25R)- 1b (Scheme 1), the protected cholesterol precursors (25S)- 6 and (25R)- 6 were prepared from stigmasterol-derived steroid-units 4a-d and C₅-side chain building blocks 5a–d by Grignard- or Wittig-coupling (Scheme 2), the configuration at C(25) of the target compounds being already present in the C₅-units. Conversion of the cholesterol intermediates to the corresponding vitamin-D₃ derivatives was carried out via the 7,8-didehydrocholesterol compounds (25S)- 2b and (25R)- 2b (Scheme 1), using the established photochemical-thermal transformation of the 5,7-diene system to the seco-triene system of cholecalciferol. The configuration at C(25) of the cholesterol precursors as assigned on basis of the known configuration of the C₅-units used, was found to be in agreement with the result of a single crystal X-ray analysis on compound 11 . The configuration at C(25) remained untouched on conversion of the cholesterol ring system to the seco-triene system of vitamin D₃ as evident from comparison of the lanthanide-induced CD. Cotton effects observed for (25S)- 3b and (25S) 1b . 25,26-Dihydroxycholecalciferol observed as a natural vitamin-D₃ metabolite has (25S)-configuration.     

Regioselective synthesis of substituted thieno[2,3-b]pyrimidines and pyrido[3′,2′:4,5]thienopyrimidines and their [3,2-d]selenopheno analogs from 3-cyanopyridine-2(1H)-thiones, 3-cyano-pyridine-2(1H)-selenones,and N-cyanochloracetamidine

3-Cyanopyridine-2(1H)-thiones and 3-cyano-2(1H)-selenones undergo heteroannelation with N-cyano-chloracetarnidine to give thieno[2, 3-b]pyridines,selenopheno[2, 3-b]pyridines, 2, 4-diantinopyrido-[3, 2:4, 5]thieno[3, 2-d]pyritnidines, and 2, 4-diamittopyrido[3, 2:4, 5]selenopheno[3, 2-d]pyritnidines, which were converted to compounds containing triazine, anzinopyrimidine, and pyrimidinedione rings.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 122–132, January, 1994.     

The surface activity of the lower homologues of n-alkylammonium chlorides in aqueous solutions. Effect of hydrophobic hydration

Summary The surface tensions of aqueous solutions ofn-alkylammonium chlorides (methyl to hexyl) have been measured at 25 °C. With methylammonium chloride the surface tension increased with concentration, whereas with ethylammonium chloride and higher homologues, the surface tension decreased with concentration. The results suggest that this transition is attributed to the effect of hydrophobic hydration. For propylammonium chloride and higher homologues, the relation between the surface tension lowering da and the concentrationC in the range of 0–10 dyne/cm, can be expressed by the equation; = AC + BC, whereA andB are constants. The surface tension coefficientB has been found to increase approximately twofold for each additional CH₂ group of alkyl chain.

---

Zusammenfassung Es wurden die Oberflächenspannungen wäßriger Lösungen vonn-Alkylammoniumchloriden (Methyl- bis Hexylammoniumchloride) bei 25 °C gemessen. Für Methylammoniumchlorid nimmt die Oberflächenspannung mit der Konzentration zu, aber bei allen höheren Homologen mit der Konzentration ab. Die Ergebnisse deuten darauf hin, daß dieser Übergang durch die hydrophobe Hydration bedingt wird. Für Propylammonium-chlorid und die höheren Homologen wird die Beziehung zwischen der Erniedrigung der Oberflächenspannung und der KonzentrationC in dem Bereich von 1 bis 10 dyn/cm durch die folgende Gleichung ausgedrückt: = AC + BC (A undB sind Konstanten). Es wurde gefunden, daß B für jede zusätzliche CH₂-Gruppe etwa um den Faktor 2 größer wird.

     

Activation Energy of Tracer-Diffusion of Manganese Ions (Mn2+) in Alkali Metal Chloride Solutions

The activation energy of the tracer diffusion of Mn²⁺ ions in alkali chlorid solutions (0.1M) has been determined in agar gel medium (1–2.5%) over the temperature range of 25–45 °C. The decrease in the value of the Arrhenius parameters, E and D ₀, with gel percentage is explained on the basis of the transition state theory. Further, the activation energy as a function of electrolyte concentration is also investigated using 1% agar gel in the temperature range of 25–45 °C. In both the cases, the activation energies are determined by the least square fitting of the diffusion coefficient data obtained at various temperatures through the Arrhenius plots.     

Copolymerization of ethylene and 1-butene using a Cr—silica catalyst in a slurry reactor

A novel slurry reactor was used to investigate the copolymerization behavior of ethylene and 1-butene in the presence of 1 wt % Cr on Davison silica (Phillips-type) catalyst over the temperature range of 0–50°C, space velocity of about 0.0051 [m³ (STP)]/(g of catalyst) h, and a fixed ethylene to 1-butene feed mole ratio of 95 : 5. The effect of varying the ethylene to 1-butene feed ratios, 100 : 0, 96.5 : 3.5, 95 : 5, 93 : 7, 90 : 10, 80 : 20, and 0 : 100 mol/mol at 50°C was also studied. The addition of 1-butene to ethylene typically increased both copolymerization rates and yields relative to ethylene homopolymerization with the same catalyst, reaching a maximum yield for an ethylene: 1-butene feed ratio of 95 : 5 at 50°C. The incorporation of 1-butene within the copolymer in all cases was less than 5 mol %. The average activation energy for the apparent reaction rate constant, k_a, based on total comonomer mole fraction in the slurry liquid for the ethylene to 1-butene feed mole ratio of 95 : 5 in the temperature range of 50–30°C measured 54.2 kJ/mol. The behavior for temperatures between 30 to 0°C differed with an activation energy of 98.2 kJ/mol; thus, some diffusion limitation likely influences the copolymerization rates at temperatures above 30°C. A kinetics analysis of the experimental data at 50°C for different ethylene to 1-butene feed ratios gave the values of the reactivity ratios, r₁ = 27.3 ± 3.6 and r₂ ≅ 0, for ethylene and 1-butene, respectively. © 1996 John Wiley & Sons, Inc.     

Stabilizing N-tosyl-2-lithioindoles with bis(N,N′-dimethylaminoethyl) ether—a non-cryogenic procedure for lithiation of N-tosylindoles and subsequent addition to ketones

A practical procedure suitable for large scale lithiation of N-tosylindoles and subsequent addition to ketones is described. Bis(N,N′-dimethylaminoethyl) ether was found to stabilize 2-lithio-N-tosylindole 1A at −25 °C [The temperatures cited are internal temperatures unless otherwise stated]. Addition of this reagent allows the lithiation of N-tosyl indoles and subsequent addition to ketones to operate at −25 °C, a temperature suitable for large scale reactions.     

Structural characterisation of some fatty acids from the brain as biomarkers of BSE risk material

Identification of bovine and ovine tissue from the central nervous system (CNS: brain and spinal cord) in meat products is possible by using certain CNS fatty acids as biomarkers in GC–MS analysis. Furthermore, the relationship between the isomers of the tetracosenic acid (C24:1) is important for differentiation of the species and age of the CNS in view of the legal definition of specified risk material (SRM). This has so far been referred to as the cis/trans ratio of the isomers of nervonic acid; however, structural analysis was not performed. Here we present results from GC–MS structural analysis by retention time and DMDS adduct profiling of the even numbered monoenoic fatty acids from C18:1 to C26:1. Retention times and mass spectra of the FAME standards indicated that the so far designated trans-nervonic acid has a different isomeric structure in the tetracosenic acid from brain-sample extracts. By performing GC–MS analysis of DMDS adducts we have shown that this isomer was actually cis-17-tetracosenic acid in all species so far tested, not trans-15-tetracosenic acid (trans-nervonic acid). The tetracosenic acid isomer ratio proved to be species-specific in accordance with previous results. Thus, instead of the ratio of cis/trans isomers of nervonic acid, the ratio of 9/7-tetracosenic acid (15c-C24:1/17c-C24:1) will have to be used as a correct reference in future publications. Although trans isomers were not detectable in sheep and cattle brain, porcine brain contained, in addition to cis-17-tetracosenic acid, small amounts of the trans isomers of the C18:1, C20:1, C24:1, and C26:1 fatty acids, in decreasing quantities. In future, this might be useful as another means of differentiation between porcine CNS (non-SRM) and ovine or bovine CNS (SRM). Extensive follow-up studies must be performed to elucidate the extent to which this GC–MS approach will facilitate the detection of CNS according to the legal SRM definition.     

Nucleosides. Part LX. Synthesis and Characterization of Monomeric Cordycepin-Vitamin and Cordycepin-Lipid Conjugates Model Substances for Biodegradable Ester and Carbonate Linkages in Conjugates and Potential Inhibitors of HIV-1 Replication

Monomeric 3′-deoxyadenosine (cordycepin) was modified at the 2′-O- ( 13–18 ) and 5′-O-position ( 25–29 ) by the vitamins E, D₂, and A and by the two lipids 1,2-di-O-palmitoylglycerol and 1,2-di-O-hexadecylglycerol via succinate or carbonate linkages. The base-labile conjugates afforded protection groups like the 2-(4-nitro-phenyl)ethoxycarbonyl (npeoc) and monomethoxytrityl group (MeOTr) that are cleavable without harming the ester and carbonate bonds, respectively. Monomeric conjugates of cordycepin and vitamin E, vitamin D₂, 1,2-di-O-palmitoylglycerol, and 1,2-di-O-hexadecylglycerol (see 13, 14, 17, 18, 25, 26, 28 , and 29 ) inhibited HIV-1-induced syncytia formation 1.7 to 6.2 fold compared to 1.5-fold for cordycepin (see Table); IC₅₀ values for 25 and 28 were 257 and 267 m?M , respectively. In addition, the monomeric cordycepin-vitamin and -lipid conjugates inhibited HIV-1 RT activity 28–49% which compares with a 13% inhibition of HIV-1 RT observed for cordycepin. The minimal inhibition of HIV-1-induced syncytia formation and HIV-1 RT activity did not proceed by the activation of RNase L. The monomeric conjugates tested ( 13, 14 ) increased PKR expression.     

Kinetik der Diazotierung des Anilins in methanolischer Bromwasserstoff- und Chlorwasserstofflösung, 2. Mitt.

The kinetics of the diazotization of aniline in 0.003n to 0.4n methanolic HBr-and HCl-solution, resp., were determined (HBr at 25 and 15°C, HCl at 25, 15, –10, –20, and –30°C).It was found that the nitrosation reaction is a preceeding advance-back-reaction.The velocity coefficients of the nitrosation from bromide (at 15 and 25°C) and from chloride (at 25, 15, –10, –20, and –30°C) were determined. The decomposition of I (splitting off a proton) is the rate determining reaction. The free enthalpies of activation for the nitrosation reaction above bromide and chloride at the said temperatures are calculated (table 3).