U(VI) adsorption by biochar fiber–MnO2 composites

The removal of U(VI) by biochar fibers from aqueous solutions has been investigated prior and after MnO₂ surface-deposition. The removal efficiency has been studied as a function of pH, U(VI) concentration, ionic strength, temperature and contact time. The fibers morphology and surface complexes were analyzed by SEM–EDX and FTIR, respectively. Evaluation of the experimental data indicates that the composite presents extraordinary adsorption capacity (q_max = 3.8 mmol g⁻¹, 904 mg g⁻¹), which is attributed to the formation of inner-sphere surface complexes, and that the adsorption reaction is a relatively fast, endothermic and entropy-driven process.

     

Hierarchically porous tobacco midrib-based biochar prepared by a simple dual-templating approach for highly efficient Rhodamine B removal

High volatile matter contents in the feedstock could promote the development of porous structures and the reactivity of biochar. Herein, tobacco midrib with high volatile matter contents was used to prepare biochar by a dual-templating approach with mild activators (K₂C₂O₄·H₂O, CaCO₃). The characterizations of textural properties indicated that tobacco midrib-based biochar possessed numerous meso-, micro-, and macro-pores, specific surface area reached 1841.9 m² g^?1. As a dye adsorbent, the adsorption capacity of this biochar towards Rhodamine B reached 588.7 mg g^?1. After recycling 5 times, it still retained over 90% of its initial adsorption capacity. Moreover, thermodynamic parameters assessed with full vańt Hoff equation confirmed that dye molecules replace water molecules connected on biochar surface during the adsorption according to negative heat capacity change (-3.9 kJ mol^?1 K^?1), ΔH⁰ (–22.1 kJ mol^?1) and ΔS⁰ (0.3 kJ mol^?1) revealed that the adsorption process of Rh B by TMB was exothermic and the disorder of the solid–liquid interface increased. Overall, this research provides a mild and effective approach to modifying biochar from special tissue of agriculture waste and an insight into the process of dye adsorption on biochar from thermodynamics.     

Preparation of amino-modified hydroxyapatite and its uranium adsorption properties

The amino-hydroxyapatite (HAP-NH₂) was synthesized by grafted amino functional groups onto hydroxyapatite. The uranium adsorption performance of HAP-NH₂ was studied under different conditions. The results indicated that HAP-NH₂ possessed high adsorption capacity (96 mg g⁻¹), wide pH values range (2–8) and fast adsorption rate (20 min). The adsorption kinetic and adsorption isotherm models of HAP-NH₂ revealed that the uranium adsorption process was belonged to chemical adsorption. Furthermore, the main forces between uranium ions and HAP-NH₂ were attributed to hydroxyl, amino and phosphorous functional groups.

     

Remediation of Cd2+ in aqueous systems by alkali-modified (Ca) biochar and quantitative analysis of its mechanism

Co-pyrolysis of straw and Ca(OH)₂ is a feasible modification method to improve the adsorption capacity of biochar for Cd. However, few studies have quantitatively analyzed the contribution of different adsorption mechanisms of alkali-modified biochar. In this study, the alkali-modified (Ca) biochar were prepared by co-pyrolyzing lime (Ca(OH)₂) and soybean straw (SBB) or rape straw (RSB) at 450 °C. The adsorption mechanism was investigated by a series of experiments and was provided by quantitative analysis. The maximum adsorption capacities of Cd²⁺ by Ca-SBB and Ca-RSB were calculated to be 78.49 mg g^?1 and 49.96 mg g^?1, which were 1.56 and 1.48 times higher than SBB (50.40 mg g^?1) and RSB (33.79 mg g^?1), respectively. Compared with the original biochar (SBB, RSB), alkali-modified biochar (Ca-SBB and Ca-RSB) were found to have faster adsorption kinetics and lower desorption efficiencies. The mechanism study indicated that Ca(OH)₂ modification effectively enhanced the contribution of ion exchange and decreased the contribution of functional groups complexation. After Ca(OH)₂ modification, precipitation and ion exchange mechanisms dominated Cd^2 + absorption on Ca-SBB, accounting for 49.85% and 34.94% of the total adsorption, respectively. Similarily ion exchange and precipitation were the main adsorption mechanism on Ca-RSB, accounting however for 61.91% and 18.47% of total adsorption, respectively. These results suggested that alkali-modified biochar has great potential to adsorp cadmium in wastewater.     

Sulfonated poly(ether ether ketone)/manganese dioxide composite for the removal of low level radionuclide ions from aqueous solution

Various composite adsorbents based on sulfonated poly(ether ether ketone)/manganese dioxide were prepared for the removal of stable and radioactive ions from contaminated aqueous solution. Batch adsorption experiments revealed superior adsorption capacities of the composite using very low initial concentration of studied elements. Starting with 1000 µg L⁻¹ contaminated solution, the maximum equilibrium metal uptake capacity reached 2.0 mg g⁻¹ for Pb²⁺, 1.9 mg g⁻¹ for Cd²⁺, Cu²⁺ and Zn²⁺, and 3.7 mg g⁻¹ for Co²⁺. In addition, the distribution coefficient reached 11,600 mL g⁻¹ for ¹³⁷Cs and 70,000 mL g⁻¹ for ²¹⁰Pb.

     

Fabrication of carboxymethyl functionalized β-cyclodextrin-modified graphene oxide for efficient removal of methylene blue

In this study, a novel carboxymethyl functionalized β-cyclodextrin-modified graphene oxide (CM-β-CD-GO) adsorbent was designed and fabricated. The CM-β-CD-GO was applied to remove methylene blue (MB) from aqueous solutions. The adsorption mechanism was discussed in detail through the study of pH effect, kinetics, and isotherm models. The adsorption of CM-β-CD-GO for MB displayed high removal rates at the pH range of 6.0–10.0, and the removal efficiency is over 90% within 20 min. The pseudo-second-order model could well describe the kinetic process of MB adsorption, and the adsorption was determined by the multi-step process. The maximum uptake capability of CM-β-CD-GO towards MB was 245.70 mg g⁻¹ at 25 °C according to Langmuir isotherm model. A possible adsorption mechanism that electrostatic attraction, π-π interaction, and host-guest supramolecular interactions supported MB adsorption was proposed. The adsorption capacity of CM-β-CD-GO showed no significant change after five cycles. The structure and morphology of CM-β-CD-GO were characterized by XPS, FT-IR, TGA, PXRD, AFM, SEM, zeta (ζ) potential determination, and Raman spectroscopy. This work provides valuable information for the design of novel adsorbents that specifically and efficiently adsorb cationic dyes contaminants.     

Adsorption of anionic methyl orange dye by polyaniline,poly(o-methylaniline) and poly(o-methoxyaniline)

This study reports the effect of substituents in the ortho position of polyaniline on the adsorption capacity to remove the anionic dye methyl orange (MO) from an aqueous solution. The aim of this study is the synthesis of polyaniline (PANI) and its derivatives, poly-o-methylaniline (poly-o-toluidine, POT) and poly-o-methoxyaniline (poly-o-anisidine, POA) for the adsorption removal of MO dye. All polymers were obtained by oxidative polymerization of the corresponding monomers and characterized by scanning electron microscopy (SEM) and infrared spectroscopy (IR). The average particle size of the polymer was about 200 nm. The effect of various parameters such as pH, temperature, adsorption time and initial concentration was analyzed. It was found that the adsorption capacity for dye removal increases from 50.68 to 222.56 mg g⁻¹ for PANI, from 16.89 to 66.57 mg g⁻¹ for POT, and from 97.26 to 532.54 mg g⁻¹ for POA with an increase in the initial dye concentration from 5 up to 50 mg L⁻¹. For all polymers, the equilibrium state of MO adsorption was reached in 50 min. The results showed that MO adsorption on PANI, POT, and POA is well described by a pseudo second order kinetic model. Isothermal studies have shown that adsorption is in good agreement with the Langmuir isotherm model, as evidenced by higher values of correlation coefficients. Based on the data of thermodynamic studies, it was concluded that MO adsorption on PANI, POT, and POA is spontaneous and endothermic.     

Analysis of the role of various biochar in the remediation of heavy metals in contaminated water and its kinetics study

Biochar prepared from agricultural wastes has gained great attention as a cost-effective treatment for metal-contaminated water. In this study, the effectiveness of corn cob and sugarcane bagasse-derived biochar for metals (Pb, Ni, and Cu) removal from an aqueous medium was examined following their physical, chemical, and structural characterization. Batch sorption experiments were carried out by employing the Langmuir and Freundlich equations. The results indicated that separation factor (R_L) values lay in the range of 0 and 1 representing the productive adsorption. The optimum dosage for metal adsorption can be recommended as 30 g L^?1. The optimum adsorption conditions were found at 6.5 and 5.5 pH, 1.5 g adsorbent dose, and at 180 min equilibrium time, for both corn cob and sugarcane bagasse biochars. At pH 6.5, adsorption capacities of Pb, Ni, and Cu were found maximum i.e., 11.34, 15.71, and 11.96 mg kg^?1 for corn cob and 8.96, 15.46, and 12 mg kg^?1, for sugarcane bagasse biochars, respectively. The metal adsorption kinetics was analyzed via four different types of the pseudo-second-order kinetic model. Moreover, the corn cob biochar showed a more pronounced activity in the removal of metals compared to sugarcane bagasse biochar. Hence, it was concluded that corncob and sugarcane bagasse-derived biochars could be utilized as economical bio-adsorbents for the heavy metals removal from wastewater.     

Facile synthesis of magnetic hybrid metal–organic frameworks with high adsorption capacity for methylene blue

A magnetic hybrid material (Fe₃O₄‐COOH/HKUST‐1) was easily synthesized via a two‐step simple solvothermal method. Through adding sodium acrylate directly into the synthesis of Fe₃O₄ spheres, the surface has more carboxyl groups. It is notable that the reactions proceed without use of organic surfactants. The magnetic hybrid material was characterized using various techniques. The magnetic hybrid material has a high specific surface area (430.15 m² g⁻¹) and excellent magnetism (23.65 emu g⁻¹). It is an efficient adsorbent for removing organic dyes like methylene blue (MB) from aqueous solution. It also can be easily recovered from liquid media using an external magnetic field. Adsorption experiment shows the magnetic hybrid material possesses a high adsorption capacity (118.6 mg g⁻¹), and has high adsorption efficiency (94.3%) after five adsorption cycles with ethanol (0.2% HCl) as eluent. The sorption kinetics and isotherm analysis indicate these sorption processes are better fitted to the pseudo‐second‐order and Langmuir equations. Thermodynamic study shows the sorption processes are spontaneous and endothermic.     

Separation of strontium and yttrium in nitric acid solutions using zirconium titanium phosphate and Dowex exchangers

Sulfonated ion irradiated (H⁺ and He²⁺) PEEK films were synthesized with a range of cross-linking density and a variety of sulfonation degrees. Batch adsorption experiments were carried out at an initial pH of 6.0 ± 0.2, initial concentrations of Pb²⁺ and ¹³⁷Cs ions of 10.0 mg L⁻¹ and 5500 Bq L⁻¹, respectively. The maximum adsorption capacity was 60 mg g⁻¹ for Pb²⁺, and the distribution coefficient reached 6200 cm³ g⁻¹ for ¹³⁷Cs. The results indicated that sulfonation could be used to recycle low cross-linked PEEK and prepare efficient adsorbents to remove toxic Pb²⁺ and ¹³⁷Cs from polluted aqueous solutions.

     

Adsorption-reduction performance of tea waste and rice husk biochars for Cr(VI) elimination from wastewater

In the current study tea waste and rice husk biochars were used for the elimination of Cr(VI) from wastewater with the objectives to study the effect of pH (3–10), shaking time (0.016–24 h), sorbent dose (0.1–1.3 g L⁻¹) and initial concentration of Cr(VI) (10–250 mg L⁻¹). The Cr(VI) sorption was studied under various factors in which solution pH played a main role and at pH 5.2, maximum 99.3% and 96.8% Cr(VI) were removed by tea waste biochar (TWB) and rice husk biochar (RHB), respectively. In comparison, 197.5 mg g⁻¹ and 195.24 mg g⁻¹ Cr(VI) were sorbed by TWB and RHB, respectively with 120 mg L⁻¹ initial Cr(VI) concentration. In contact time study, after 2 h, equilibrium was achieved for both biochars which indicated that the Cr(VI) elimination from aqueous medium is a fast process. Kinetic and isotherm modeling data showed that pseudo-second order model and Langmuir (monolayer sorption) models provided the best fit for sorption of Cr(VI) onto both biochars. The –OH, COO– and –NH₂ functional groups were involved in the sorption of Cr(VI) onto biochars according to FTIR. Biochars produced from both biomass effectively removed Cr(VI) from polluted water, however in comparison sorption capacity of TWB was slightly higher than RHB. It was concluded that TWB and RHB could provide a cost-effective and viable option for elimination of Cr(VI) from wastewater.     

化学-微波法制备高膨胀率膨胀蛭石及对亚甲基蓝的吸附机理

基于工业蛭石优异的热膨胀性及阳离子交换性,利用化学-微波法制备高膨胀率膨胀蛭石(HEV),采用对比分析法对亚甲基蓝(MB)的吸附性能进行了研究。结果表明,HEV膨胀率高(膨胀率K=60倍),比表面积大(80 m^2·g^-1),孔径主要分布在2~5 nm之间,仍保持蛭石、水金云母和金云母的物相结构,阳离子交换容量由原样的0.835 mmol·g^-1增加到1.005 mmol·g^-1。HEV对MB的吸附容量受MB初始浓度、吸附时间、溶液pH和吸附温度影响。当MB溶液初始浓度为300 mg·L-1、吸附时间为240 min、溶液pH值为9、吸附温度为298 K时,吸附量为419.87 mg·g^-1,远高于蛭石原矿。吸附过程符合Langmuir模型与准二级动力学模型,为单分子层吸附和吸附势垒较低的自发无序吸热反应过程。HEV具有优异的阳离子交换性和吸附性,是一种具有开发价值的高效低成本吸附剂。     

Three-dimensional graphene materials for UO22+ electrosorption

In this paper, three-dimensional graphene (3DG) electrode material was prepared by hydrothermal reduction using graphene oxide as precursor. Its morphology and structure were characterized by SEM, BET, XRD, Raman, FTIR and TG, and its electrochemical performance was also measured. The results showed that 3DG possessed hierarchical pore structure, large specific surface area, high specific capacitance and low impedance. Using 3DG as electrode material for electrosorption of UO₂²⁺, it showed that the saturated adsorption capacity can reach up to 113.80 mg g^?1 and the adsorption rate is 0.32 mg g^?1 min^?1 at a given optimal applied voltage of 1.8 V.

     

The preparation of PZS-OH/CNT composite and its adsorption of U(VI) in aqueous solutions

In this paper, polycyclotriphosphazene coated carbon nanotubes (PZS-OH/CNT) composite material has been synthesized via a facial method. The prepared PZS-OH/CNT was characterized by FTIR, BET, zeta potential and SEM. The material was investigated as an adsorbent for the adsorption towards U(VI) from aqueous solutions. Several parameters like solution pH, contact time and temperature were used to evaluate the sorption efficiency. The results indicated that the adsorption capacity of uranium on PZS-OH/CNT was improved from 41.48 mg g⁻¹ for CNT to 338.98 mg g⁻¹ due to the presence of functional groups on PZS-OH/CNT. The U(VI) sorption on PZS-OH/CNT was well fitted to the Langmuir adsorption isotherm and pseudo-second kinetics models. The thermodynamic parameters (ΔH, ΔS and ΔG) showed the U(VI) adsorption on CNT and PZS-OH/CNT was endothermic and spontaneous in nature.

     

Surface‐initiated atom transfer radical polymerization of a new rhodanine‐based monomer for rapid magnetic removal of Co(II) ions from aqueous solutions

The present study reports synthesis and characterization of a new acrylamide‐based monomer containing rhodanine moiety, N‐3‐amino‐thiazolidine‐4‐one‐acrylamide (ATA). Poly(ATA)‐grafted magnetite nanoparticles (poly(ATA)‐g‐MNPs) were prepared using surface‐initiated atom transfer radical polymerization of the monomer on Fe₃O₄ nanoparticles. The grafted nanoparticles were characterized by Fourier transform infrared analysis, scanning electron microscopy, X‐ray diffraction, and vibrating sample magnetometry. The amount of the grafted polymer was 209 mg g⁻¹, as calculated from thermogravimetric analysis experiment. The capability of poly(ATA)‐g‐MNPs to remove Co(II) cations was shown under optimal conditions of contact time, pH, adsorbent dosage, and initial Co(II) concentration. About 86% of the Co(II) cations were removed over 7 minutes. The adsorption kinetics obeyed the pseudo–second‐order kinetic equation, and the Langmuir isotherm model best described the adsorption isotherm with a maximum adsorption capacity of 3.62 mg g⁻¹. The thermodynamic investigation showed spontaneous nature of the adsorption process (ΔG = −2.90 kJ mol⁻¹ at 25°C ± 1°C). In addition, the poly(ATA)‐g‐MNPs were regenerated by simply washing with an aqueous 0.1M HCl solution. The study of the reusability of the prepared magnetic sorbent revealed that the sorbent can be reused without a significant decrease in the extraction efficiency and be recovered by 95.4% after 7 cycles. These findings suggest that the grafted nanoparticles are stable and reusable adsorbent and can be potentially applied to water treatment in efficient removal of Co(II) cations.     

Introduction of CdO nanoparticles into graphene and graphene oxide nanosheets for increasing adsorption capacity of Cr from wastewater collected from petroleum refinery

Graphene and graphene oxide nanocomposites are promising and fascinating types of nanocomposites because of their fast kinetics, unique affinity for heavy metals, and greater specific area. Initially, in this study, a green, cost-effective and facile method was utilized to prepare G, GO, CdO, G-CdO, and CdO-GO nanocomposites by Azadirachta indica and then analyzed using UV–vis spectroscopy, Fourier-transform spectroscopy, Raman, X-ray diffraction and scanning electron microscope. The synthesized nanocomposites were explored for chromium elimination from wastewater collected from a petroleum refinery. CdO-GO, G-CdO nanocomposites showed remarkable adsorption capability of 699 and 430 mg g^?1 which was higher than G (80 mg g^?1), GO (65 mg g^?1), and CdO (400 mg g^?1). Based on the R² (correlation coefficient) values, the kinetic statistics of Cr (VI) onto the G, GO, CdO, G-CdO, and CdO-GO were effectively obeyed by pseudo-second-order than by all other models. The R² values for the five nano-bioadsorbents were extraordinarily high (R² greater than 0.990) which ensured the chemisorption. This study ensured that the adsorptive removal rate of Cr (VI) is still greater than 85 % after repeated five cycles, suggesting that the produced nanomaterials are adsorbents with strong recyclability.     

Single-Step Hydrothermal Synthesis of Biochar from H3PO4-Activated Lettuce Waste for Efficient Adsorption of Cd(II) in Aqueous Solution

Developing an ideal and cheap adsorbent for adsorbing heavy metals from aqueous solution has been urgently need. In this study, a novel, effective and low-cost method was developed to prepare the biochar from lettuce waste with H₃PO₄ as an acidic activation agent at a low-temperature (circa 200 °C) hydrothermal carbonization process. A batch adsorption experiment demonstrated that the biochar reaches the adsorption equilibrium within 30 min, and the optimal adsorption capacity of Cd(II) is 195.8 mg∙g⁻¹ at solution pH 6.0, which is significantly improved from circa 20.5 mg∙g⁻¹ of the original biochar without activator. The fitting results of the prepared biochar adsorption data conform to the pseudo-second-order kinetic model (PSO) and the Sips isotherm model, and the Cd(II) adsorption is a spontaneous and exothermic process. The hypothetical adsorption mechanism is mainly composed of ion exchange, electrostatic attraction, and surface complexation. This work offers a novel and low-temperature strategy to produce cheap and promising carbon-based adsorbents from organic vegetation wastes for removing heavy metals in aquatic environment efficiently.     

Characterization and Artificial Neural Networks Modelling of methylene blue adsorption of biochar derived from agricultural residues: Effect of biomass type,pyrolysis temperature,particle size

Biochar has been explored as a sorbent for contaminants, soil amendment and climate change mitigation tool through carbon sequestration. Through the optimization of the pyrolysis process, biochar can be designed with qualities to suit the intended uses. Biochar samples were prepared from four particle sizes (100–2000 µm) of three different feedstocks (oak acorn shells, jift and deseeded carob pods) at different pyrolysis temperatures (300–600 °C). The effect of these combinations on the properties of the produced biochar was studied. Biochar yield decreased with increasing pyrolysis temperature for all particle sizes of the three feedstocks. Ash content, fixed carbon, thermal stability, pH, electrical conductivity (EC), specific surface area (SSA) of biochar increased with increasing pyrolysis temperature. Volatile matter and pH value at the point of zero charge (pH_pzc) of biochar decreased with increasing pyrolysis temperature. Fourier-transform infrared spectroscopy (FTIR) analysis indicated that the surface of the biochar was rich with hydroxyl, phenolic, carbonyl and aliphatic groups. Methylene blue (MB) adsorption capacity was used as an indicator of the quality of the biochar. Artificial neural networks (ANN) model was developed to predict the quality of the biochar based on operational conditions of biochar production (parent biomass type, particle size, pyrolysis temperature). The model successfully predicted the MB adsorption capacity of the biochar. The model is a very useful tool to predict the performance of biochar for water treatment purposes or assessing the general quality of a design biochar for specific application.     

Preparation and characterization of novel bi-functionalized xerogel for removal of methylene blue and lead ions from aqueous solution in batch and fixed-bed modes: RSM optimization,kinetic and equilibrium studies

A new bi-functionalized xerogel is fabricated and then was identified by ²⁹Si CP MAS NMR, SEM, FTIR, and nitrogen adsorption–desorption approaches. As-prepared xerogel efficiency for simultaneous uptake of methylene blue (MB) and Pb²⁺ ions from aqueous solution is investigated. Individual and combination effects of operating variables (xerogel mass, contact time and initial MB and Pb²⁺ ion concentration) on the retention performance is achieved with central composite design (CCD) and upgraded through response surface method (RSM). Batch equilibrium outcomes uncovered that MB and Pb²⁺ ions adsorption onto hybrid composite could be all around depicted by Langmuir isotherm model contrasted with Freundlich equation. Howbeit, the column trials reported that the breakthrough capacities of MB and Pb(II) are observed to be 512 mg.g⁻¹ and 400 mg.g⁻¹ respectively. XPS and FTIR investigations uncovered that the main mechanism of lead uptake ought to be credited to the chelation with –NH₂ and ion exchange with –SH groups in the xerogel frameworks. While the MB adsorption system is proposed to be electrostatic attractions, π-π stacking interactions and hydrogen bonds. The work undertaken in this research highlights the major role of the as-synthesized xerogel for treatment of industrial wastewater.