Characterization of zeolite NaA membrane by FTIR-ATR and its application to the rapid evaluation of dehydration performance.

A zeolite NaA (LTA) membrane supported by an alumina porous support tube was characterized by Fourier Transform Infrared Attenuated Total Reflectance method (FTIR-ATR) with a diamond prism as the waveguide. A method using the FTIR-ATR was developed to estimate rapidly the EtOH/H2O pervaporation (PV) performance of the membrane. The Si-O asymmetric stretching vibration region of LTA membrane spectra synthesized hydrothermally on seeded alumina substrates showed a bimodal peak (830 - 1200 cm(-1)). The two peaks were assigned to a surface LTA directly derived from the seed crystal (1012 cm(-1)), and to LTA and/or amorphous substances embedded in the alumina porous support (930 cm(-1)). The spectrum from LTA membrane synthesized on nonseeded alumina substrate, however, showed a single broad peak similar to the powder-formed one. These results indicate that the Si-O spectral shape of the LTA membrane is influenced strongly by the synthesis method. Also, the FTIR-ATR of the LTA membrane can detect the Si-O peaks as part of the depth information. It was first shown that the relative ratio (930 cm(-1)/1012 cm(-1)) of the two Si-O peaks from the LTA membranes on seeded alumina substrates closely relates to the water selectivity (alpha) in the PV of EtOH/H2O mixture; the alpha increases exponentially with the peak ratio. This result suggests that the differences in the vertical distribution of LTA crystal and amorphous material strongly affect the dehydration performance in the EtOH/H2O PV, that is, the amorphous-like material embedded in the alumina porous support plays an important role. The relative peak ratio measurement can be used for the rapid evaluation of the dehydration performance of the membrane.     

Evaluation of fine structure of tubular zeolite NaA membrane by FTIR-ATR and FIB-TEM.

A zeolite NaA (LTA) membrane supported by an alumina porous support tube for pervaporation (PV) dehydration of ethanol was characterized by transmission electron microscopy (TEM) using a focused ion beam (FIB) thin-layer specimen preparation technique and by Fourier transform infrared attenuated total reflectance method (FTIR-ATR) using a diamond prism as the waveguide. FIB-TEM clearly presented cross-section images up to about 15 microm depth from the membrane surface. FTIR-ATR monitored the Si-O asymmetric stretching vibration spectrum. The Si-O spectrum was compared with the TEM image and their relationships were discussed. By combining the two methods, we could study the thickness of surface LTA crystals, the grain boundary, the LTA/alumina interface structure and the crystallinity and density of materials inside of the alumina porous support. Consequently, fine structure changes of the LTA membrane corresponding to the hydrothermal synthesis condition could be sensitively detected.     

Evaluation of the dehydration performance of zeolite NaA membrane on porous alumina tube by the alumina X-ray diffraction intensity.

A zeolite NaA (A-type zeolite of ca. 0.4 nm pore size; Linde Type A, LTA) membrane for the dehydration of alcohol was characterized by X-ray diffraction analysis (XRD). Also, the relationship between the X-ray absorption and the EtOH/H2O pervaporation (PV) dehydration performance (water selectivity and permeation flux) of the LTA membrane was first investigated. The LTA membranes used here were gel-synthesized hydrothermally on an alumina porous support tube. Since diffraction lines from the alumina generate from a deeper layer than those of the LTA crystal, and are absorbed by both the surface LTA crystal and materials embedded in the alumina porous support, the alumina (113) diffraction line was intensively monitored to estimate the overall X-ray absorption by the LTA membrane. The intensity of the alumina (113) diffraction line showed a good correlation with the PV dehydration performance of the LTA membrane, that is, lower values with the water selectivity and higher values with the permeation flux. The lower diffraction intensity means stronger X-ray absorption by the LTA membrane. The major factor causing the difference in the X-ray absorption is the thickness or quantity of materials embedded in an alumina porous support, rather than those of the surface LTA crystal. These phenomena can be used conveniently (without real PV experiments) to determine the EtOH/H2O PV dehydration performance of the LTA membrane.     

Synthesis and Properties of Zeolites from Autoclaved Aerated Concrete (AAC) Waste

Syntheses routes for the conversion of autoclaved aerated concrete (AAC) waste into aluminosilicate zeolites like LTA and related phases were developed. The procedures always started with leaching steps of the pure AAC waste by combinations of strong alkaline (NaOH) and mild acid (citric acid) treatments, before the real crystallization process was performed separately under addition of sodium aluminate. All products were characterized by X‐ray powder diffraction (XRD), scanning electron microscopy (SEM) combined with energy dispersive X‐ray analysis (EDX‐analysis) and Fourier‐transform infrared spectroscopy (FTIR). Zeolites LTA and related phases basic sodalite (SOD), hydrosodalite (SOD), cancrinite (CAN) and an intermediate phase between SOD and CAN were observed. Depending on the preparation route tailor made synthesis of pure phase zeolite LTA with crystal sizes up to 5 μm was worked out. In addition to syntheses procedures important properties of the zeolites were discussed with respect to the treatment procedure of AAC. It is shown, that the special synthesis pathway is not only responsible for the product composition and formation of a certain structure type but also exhibits a strong influence on the crystallinity, crystal size, and morphology. The water sorption capacity and the hydrothermal stability of the products were selected for those further investigations. Whereas adequate water sorption capacity up to 272 mg · g^–1 were measured for zeolites LTA obtained from two different reaction routes, limited hydrothermal stabilities were revealed for other products. Under the conditions of strong hydrothermal treatment at a temperature of 473 K for 72 h, a more or less extended phase transformation into ANA‐Type zeolites occurred. This process was least extensive for pure phase zeolite LTA obtained from the alkaline solution of AAC leaching.     

Effects of polymer architecture and composition on the adhesion of poly(tetrafluoroethylene).

Poly(glycidyl methacrylate), PGMA, chains in linear and arborescent structures were incorporated onto surfaces of poly(tetrafluoroethylene), PTFE, films by hydrogen plasma and ozone treatment and atom transfer radical polymerization. The epoxide groups of the PGMA chains were further reacted with acetic acid (AAc), oxalic acid (XAc), allyl amine (AA), and ethylenediamine (EDN) to introduce hydroxyl and amine groups to the surfaces of the PTFE films. Surface characterizations performed by Fourier Transform infrared attenuated total reflectance (FTIR-ATR) spectroscopy and X-ray photoelectron spectroscopy (XPS) confirmed the surface modification and the chemical structure. The PGMA chains in arborescent structures show a high effectiveness for the enhancement of the adhesion of PTFE films. The adhesion of PTFE films was also significantly enhanced by ring-opening reactions of the PGMA epoxide groups with acetic acid and amine compounds. A high value of 9.5 N cm(-1) in the optimum 180 degrees peel strength test was observed with PTFE/copper assemblies.     

Preparation of high density polyethylene/polyethylene-block-poly(ethylene glycol) copolymer blend porous membranes via thermally induced phase separation process and their properties

<正>High density polyethylene(HDPE)/polyethylene-block-poly(ethylene glycol)(PE-b-PEG) blend porous membranes were prepared via thermally induced phase separation(TIPS) process using diphenyl ether(DPE) as diluent.The phase diagrams of HDPE/PE-b-PEG/DPE systems were determined by optical microscopy and differential scanning calorimetry(DSC).By varying the content of PE-b-PEG,the effects of PE-b-PEG copolymer on morphology and crystalline structure of membranes were studied by scanning electron microscopy(SEM) and wide angle X-ray diffraction(WAXD). The chemical compositions of whole membranes and surface layers were characterized by elementary analysis,Fourier transform infrared spectroscopy-attenuated total reflection(FTIR-ATR) and X-ray photoelectron spectroscopy(XPS).Water contact angle,static protein adsorption and water flux experiments were used to evaluate the hydrophilicity,antifouling and water permeation properties of the membranes.It was found that the addition of PE-b-PEG increased the pore size of the obtained blend membranes.In the investigated range of PE-b-PEG content,the PEG blocks could not aggregate into obviously separated domains in membrane matrix.More importantly,PE-b-PEG could not only be retained stably in the membrane matrix during membrane formation,but also enrich at the membrane surface layer.Such stability and surface enrichment of PE-b-PEG endowed the blend membranes with improved hydrophilicity,protein absorption resistance and water permeation properties,which would be substantially beneficial to HDPE membranes for water treatment application.     

PREPARATION OF HIGH DENSITY POLYETHYLENE/POLYETHYLENE-ΒLOCK- POLY(ETHYLENE GLYCOL) COPOLYMER BLEND POROUS MEMBRANES VIA THERMALLY INDUCED PHASE SEPARATION PROCESS AND THEIR PROPERTIES

High density polyethylene (HDPE)/polyethylene-Wock-poly(ethylene glycol) (PE-b-PEG) blend porous membranes were prepared via thermally induced phase separation (TIPS) process using diphenyl ether (DPE) as diluent. The phase diagrams of HDPE/PE-b-PEG/DPE systems were determined by optical microscopy and differential scanning calorimetry (DSC). By varying the content of PE-b-PEG, the effects of PE-b-PEG copolymer on morphology and crystalline structure of membranes were studied by scanning electron microscopy (SEM) and wide angle X-ray diffraction (WAXD). The chemical compositions of whole membranes and surface layers were characterized by elementary analysis, Fourier transform infrared spectroscopy-attenuated total reflection (FTIR-ATR) and X-ray photoelectron spectroscopy (XPS). Water contact angle, static protein adsorption and water flux experiments were used to evaluate the hydrophilicity, antifouling and water permeation properties of the membranes. It was found that the addition of PE-b-PEG increased the pore size of the obtained blend membranes. In the investigated range of PE-b-PEG content, the PEG blocks could not aggregate into obviously separated domains in membrane matrix. More importantly, PE-b-PEG could not only be retained stably in the membrane matrix during membrane formation, but also enrich at the membrane surface layer. Such stability and surface enrichment of PE-b-PEG endowed the blend membranes with improved hydrophilicity, protein absorption resistance and water permeation properties, which would be substantially beneficial to HDPE membranes for water treatment application.     

Copper-exchanged LTA zeolite membranes with enhanced water flux for ethanol dehydration

Phase-pure and well-intergrown Cu-LTA membranes are developed through copper ions exchange of sodium ions in Na-LTA framework. For pervaporation of 90.0 wt% ethanol/10.0 wt% water mixtures, the Cu-LTA membrane shows much higher water flux than Na-LTA membranes due to the enhancement of the pore size after ions exchange.     

Hydrophilic nanofiltration membranes with self-polymerized and strongly-adhered polydopamine as separating layer

Inspired by the self-polymerization and strong adhesion characteristics of dopamine in aqueous conditions,a novel hydrophilic nanofiltration（NF） membrane was fabricated by simply dipping polysulfone（PSf） ultrafiltration（UF） substrate in dopamine solution.The changes in surface chemical composition and morphology of membranes were determined by Fourier transform infrared spectroscopy（FTIR-ATR）,X-ray photoelectron spectroscopy（XPS）,scanning electron microscopy（SEM） and atomic force microscopy（AFM）.The experimental results indicated that the self-polymerized dopamine formed an ultrathin and defect-free barrier layer on the PSf UF membrane.The surface hydrophilicity of membranes was evaluated through water contact angle measurements.It was found that membrane hydrophilicity was significantly improved after coating a polydopamine（pDA） layer,especially after double coating.The dyes filtration experiments showed that the double-coated membranes were able to reject completely the dyes of brilliant blue,congo red and methyl orange with a pure water flux of 83.7 L/（m²·h） under 0.6 MPa.The zeta potential determination revealed the positively-charged characteristics of PSf/pDA composite membrane in NF process.The salt rejection of the membranes was characterized by 0.01 mmol/L of salts filtration experiment.It was demonstrated that the salts rejections followed the sequence:NaCl2SO₄422,and the rejection to CaCl₂ reached 68.7%.Moreover,the composite NF membranes showed a good stability in water-phase filtration process.     

Structure and pH‐sensitive properties of poly (vinylidene fluoride) membrane changed by blending poly (acrylic acid) microgels

pH‐sensitive poly (vinylidene fluoride) (PVDF)/poly (acrylic acid) (PAA) microgels membranes are prepared by phase inversion of the N, N‐dimethylformamide solution containing PAA microgels and PVDF in aqueous solution. The composition and structure of the blend membrane are investigated by Fourier transform infrared spectra, X‐ray photoelectron spectroscopy measurements, thermo gravimetric analysis, field‐emission scanning electron microscope and atomic force microscope. The results indicate the surface and cross section of the blend membranes have a porous structure with PAA microgels immobilized inside the pore and on the membrane surface. The blend PVDF membranes exhibit pH‐sensitive water flux, with the most drastic change in permeability observed between pH 3.7 and 6.3. The blend membranes are fouled by bovine serum albumin, and their antifouling property is enhanced by increasing PAA microgels, mainly derived from the improved hydrophilic property. Copyright © 2013 John Wiley & Sons, Ltd.     

New type of nanofiltration membrane based on crosslinked hyperbranched polymers

Novel nanofiltration (NF) membrane was developed from hydroxyl-ended hyperbranched polyester (HPE) and trimesoyl chloride (TMC) by in situ interfacial polymerization process using ultrafiltration polysulfone membrane as porous support. Fourier transform infrared spectroscopy (FTIR-ATR), scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and water contact angle (CA) measurements were employed to characterize the resulting membranes. The results indicated that the crosslinked hyperbranched polyester produced a uniform, ultra-thin active layer atop polysulfone (PSf) membrane support. FTIR-ATR spectra indicated that TMC reacted sufficiently with HPE. Water permeability and salts rejection of the prepared NF membrane were measured under low trans-membrane pressures. The resulting NF membranes exhibited significantly enhanced water permeability while maintaining high rejection of salts. The salts rejection increase was accompanied with the flux decrease when TMC dosage was increased. The flux and rejection of NF 1 for Na₂SO₄ (1 g/L) reached to 79.1 l/m² h and 85.4% under 0.3 MPa. The results encourage further exploration of NF membrane preparation using hyperbranched polymers (HBPs) as the selective ultra-thin layer.     

The influence of phase inversion process modified by chemical reaction on membrane properties and morphology

In this study, the chemical reaction between acetic acid (CH₃COOH) used as non-solvent additive of casting solution and sodium carbonate (Na₂CO₃) dissolved in water as coagulant was employed to modify the classical phase inversion process. By means of this method, the polyethersulphone (PES) ultrafiltration (UF) membranes were prepared. The influence of acetic acid on the properties of the polymer solution was examined by viscometry and related to the morphology of the membrane prepared from the casting solution. The membranes were characterized in terms of the pure water flux, solute transport and field emission scanning electron microscope (FESEM) observation. It was found that chemical reaction between the additive and coagulant increases membrane permeability and mean pore size while maintaining the relatively narrow pore size distribution. FESEM images also confirmed that the chemical reaction contributes to suppress the formation of macrovoid and enhance the interconnectivity of pore. Furthermore, the potential mechanism of membrane formation influenced by chemical reaction was explored tentatively.     

Time evolution studies of the H2O/quartz interface using sum frequency generation, atomic force microscopy, and molecular dynamics

Many interfacial studies on solid surfaces, for example, quartz/water, assume that a standard cleaning procedure regenerates the surface reproducibly. In the reported work, the results of two surface specific techniques, sum frequency generation (SFG) spectroscopy and atomic force microscopy, show that the effects of prolonged exposure to Nanopure water and to pH 10 NaOH are distinctly different. In conjunction with the experimental data, molecular mechanics is used to correlate the SFG spectral frequencies to the hydrogen stretching vibrations of the surface-bound water molecules. It is found that after 17 days of soaking in water, water molecules penetrate into the SiO2 matrix to produce a swollen and amorphous layer; it is likely that broken Si-O bonds from the polishing process serve as nucleation sites for hydration and swelling. Disorder introduced in the interfacial water layer is detected by the rising intensity of the weakly hydrogen-bonded SFG peak at 3450 cm(-1). Dominance of the 3450 cm(-1) is absent in a pH 10, NaOH-soaked quartz disk, indicating that the strong hydrogen-bonded network in water remains intact.     

Development and characterization of a wettable surface modified aromatic polyethersulphone using glow discharge induced HEMA-graft polymerisation

The aromatic polyethersulphone (PES) is a well known polymer for the preparation of membranes with excellent thermal stability and chemical resistance. The disadvantage of PES-membranes is their hydrophobic character, which in contact with protein containing solutions leads to high protein adsorption and as a consequence to deterioration of membrane properties. In this report the surface modification of PES by means of glow discharge induced grafting of 2-hydroxyethyl methacrylate (HEMA) is described. Graft polymerisation creates a largely wettable layer of poly(2-hydroxyethyl methacrylate) (PHEMA) on the surface of PES. This has been shown by contact angle measurements using the Wilhelmy plate method. Chemical characterization is carried out by means of X-ray photoelectron spectroscopy (XPS) and infrared spectroscopy/attentuated total reflection (FTIR-ATR). The influence of storage conditions on the surface properties of modified PES samples has been investigated after storage in vacuum, water, and air.     

Development and characterization of a wettable surface modified aromatic polyethersulphone using glow discharge induced HEMA-graft polymerisation

The aromatic polyethersulphone (PES) is a well known polymer for the preparation of membranes with excellent thermal stability and chemical resistance. The disadvantage of PES-membranes is their hydrophobic character, which in contact with protein containing solutions leads to high protein adsorption and as a consequence to deterioration of membrane properties. In this report the surface modification of PES by means of glow discharge induced grafting of 2-hydroxyethyl methacrylate (HEMA) is described. Graft polymerisation creates a largely wettable layer of poly(2-hydroxyethyl methacrylate) (PHEMA) on the surface of PES. This has been shown by contact angle measurements using the Wilhelmy plate method. Chemical characterization is carried out by means of X-ray photoelectron spectroscopy (XPS) and infrared spectroscopy/attentuated total reflection (FTIR-ATR). The influence of storage conditions on the surface properties of modified PES samples has been investigated after storage in vacuum, water, and air.     

A LDH Template Triggers the Formation of a Highly Compact MIL-53 Metal-Organic Framework Membrane for Acid Upgrading

Highly compact metal–organic framework (MOF) membranes offer hope for the ambition to cope with challenging separation scenarios with industrial implications. A continuous layer of layered double hydroxide (LDH) nanoflakes on an alumina support as a template triggered a chemical self-conversion to a MIL-53 membrane, with approximately 8 hexagonal lattices (LDH) traded for 1 orthorhombic lattice (MIL-53). With the sacrifice of the template, the availability of Al nutrients from the alumina support was dynamically regulated, which resulted in synergy for producing membranes with highly compact architecture. The membrane can realize nearly complete dewatering from formic acid and acetic acid solutions, respectively, and maintain stability in a continuous pervaporation over 200 h. This is the first success in directly applying a pure MOF membrane to such a corrosive chemical environment (lowest pH value of 0.81). The energy consumption is saved by up to 77 % when compared with the traditional distillation.     

Electron-beam graft-modified membranes with externally controlled flux

Pre-irradiation grafting as a means to modify commerical poly(vinylidene fluoride) (PVDF) membranes has been studied. The membranes prepared were weak cation-exchange membranes (acrylic acid functionality), anion-exchange membranes (trimethyl ammonium functionality) and temperature-sensitive membranes (N-isopropyl amide functionality). Different graft loads were obtained by varying reaction time, radiation dose and in the case of acrylic acid the graft solution composition. The trimethyl ammonium chloride functionality was obtained by grafting vinyl benzyl chloride onto a PVDF membrane and aminating the benzyl chloride groups in a 45% trimethyl amine–water solution. For a membrane grafted with 9 wt% acrylic acid the flux increased approximately 70 times when the pH was decreased from 6 to 2. For a membrane with 5 wt% trimethyl ammonium functionality the flux increased both when pH was decreased below 3 and increased above 11. For a membrane grafted with 18 wt% N-isopropyl acrylamide a sharp increase of flux was observed when the temperature was raised above 32°C.     

Effect of solution chemistry on the surface charge of polymeric reverse osmosis and nanofiltration membranes

A streaming potential analyzer has been used to investigate the effect of solution chemistry on the surface charge of four commercial reverse osmosis and nanofiltration membranes. Zeta potentials of these membranes were analyzed for aqueous solutions of various chemical compositions over a pH range of 2 to 9. In the presence of an indifferent electrolyte (NaCl), the isoelectric points of these membranes range from 3.0 to 5.2. The curves of zeta potential versus solution pH for all membranes display a shape characteristic of amphoteric surfaces with acidic and basic functional groups. Results with salts containing divalent ions (CaCl₂, Na₂SO₄, and MgSO₄) indicate that divalent cations more readily adsorb to the membrane surface than divalent anions, especially in the higher pH range. Three sources of humic acid, Suwannee River humic acid, peat humic acid, and Aldrich humic acid, were used to investigate the effect of dissolved natural organic matter on membrane surface charge. Other solution chemistries involved in this investigation include an anionic surfactant (sodium dodecyl sulfate) and a cationic surfactant (dodecyltrimethylammonium bromide). Results show that humic substances and surfactants readily adsorb to the membrane surface and markedly influence the membrane surface charge.     

Grazing incidence x-ray diffraction analysis of zeolite NaA membranes on porous alumina tubes.

Zeolite NaA-type membranes hydrothermally synthesized on porous alumina tubes, for dehydration process, were characterized by grazing incidence 2 theta scan X-ray diffraction analysis (GIXRD). The fine structure of the membrane was studied fractionally for surface layer and for materials embedded in the porous alumina tube. The thickness of the surface layer on the porous alumina tube in the membranes used in this study was approximately 2-3 microm as determined from transmission electron microscopy with focused ion beam thin-layer specimen preparation technique (FIB-TEM). To discuss the effects of the membrane surface morphology on the GIXRD measurements, CaA-type membrane prepared by ion exchange from the NaA-type membrane and surface-damaged NaA-type membrane prepared by water leaching were also studied. For the original NaA-type membrane, 2 theta scan GIXRD patterns could be clearly measured at X-ray incidence angles (alpha) ranging from 0.1 to 2.0 deg in increments of 0.1 deg. The surface layers of the 2 - 3 microm on the porous alumina tube correspond to the alpha values up to ca. 0.2 deg. For the CaA-type and the surface-damaged NaA-type membranes, however, diffraction patterns from the surface layer could not be successfully detected and the others were somewhat broad. For all the three samples, diffraction intensities of both zeolite and alumina increased with depth (X-ray incidence angle, alpha) in the porous alumina tube region. The depth profile analysis of the membranes based on the GIXRD first revealed that amount of zeolite crystal embedded in the porous alumina tube is much larger than that in the surface layer. Thus, the 2 theta scan GIXRD is a useful method to study zeolite crystal growth mechanism around (both inside and outside) the porous alumina support during hydrothermal synthesis and to study water permeation behavior in the dehydration process.     

Polyaniline-poly(vinylidene fluoride) blend microfiltration membrane and its spontaneous gold recovery application

Structural regular polyaniline was synthesized via a modified-chemical oxidative polymerization reaction. Highly hydrophilic polyaniline (PANi) and polyaniline-poly(vinylidene fluoride) blend (PANi-PVDF) membranes were prepared by solution casting and phase inversion techniques. Both of the mechanical and filtration properties of the membranes depend on the polymer composition and doping level of the blends. The elasticity of the membrane is greatly improved upon introducing poly(vinylidene fluoride) into the blend. The water permeability of the blend membranes is further enhanced when the membranes are doped with hydrochloric acid. The PANi-PVDF blend membranes are capable of recovering metallic gold from the acid/halide leaching streams spontaneous and sustainably, and are promising candidates for wastewater treatments in electronic industries.