Definition of magneto-structural correlations for the MnII ion

The electronic properties of the high spin mononuclear MnII complexes [Mn(tpa)(NCS)2] (1) (tpa=tris-2-picolylamine), [Mn(tBu3-terpy)2](PF6)2 (2) (tBu3-terpy=4,4',4'-tri-tert-butyl-2,2':6',2'-terpyridine) and [Mn(terpy)2](I)2 (3) (terpy=2,2':6',2'-terpyridine) with an N6 coordination sphere have been determined by multifrequency EPR spectroscopy. The X-ray structures of 1.CH3CN and 2.C4H10 O.0.5 C2H5OH.0.5 CH3OH reveal that the MnII ion lies at the center of a distorted octahedron. The D-values of 1-3 all fall in the narrow range of 0.041 to 0.105 cm(-1). The comparison of the results reported here and those found in the literature is consistent with the following observation: the D value is sensitive to the coordination number (6 or 5) of the MnII ion as long as the coordination sphere involves only nitrogen and/or oxygen based ligands. This magneto-structural correlation has been analyzed in this work though DFT model calculations. The zero-field splitting (zfs) parameters of 1-3 have been calculated and are in reasonable agreement with the experimental values. Hypothetical simplified models [Mn(NH3)x(OH2)y]2+ (x+y=5 or 6 and [Mn(NH3)5X]+ (X=OH, Cl)) have been constructed to investigate the origin of the zfs. This investigation reveals i) that D is sensitive to the coordination number (5 or 6) of the MnII ion, ii) for the five coordinate systems the major contribution to D is the spin-orbit coupling part, iii) for the six coordinate systems the major contribution to D is the spin-spin interaction and iv) the deprotonation of a water ligand leads to an increase of D, consistent with the relative ligand fields of OH(-) versus H2O.     

A comparison of experimental and DFT calculations of ¹⁹⁵Pt NMR shielding trends for [PtX(n)Y(6-n)](2-) (X, Y = Cl, Br, F and I) anions

A comparison between experimental and calculated gas-phase as well as the conductor-like screening model DFT (195)Pt chemical shifts of a series of octahedral [PtX(6-n)Y(n)](2-) complexes for X = Cl, Br, F, I was carried out to assess the accuracy of computed NMR shielding and to gain insight into the dominant σ(dia), σ(para) and σ(SO) shielding contributions. The discrepancies between the experimental and the DFT-calculated (195)Pt chemical shifts vary for these complexes as a function of the coordinated halide ions, the largest being obtained for the fluorido-chlorido and fluorido-bromido complexes, while negligible discrepancies are found for the [PtCl(6-n)Br(n)](2-) series; the discrepancies are somewhat larger where a significant deviation from the ideal octahedral symmetry such as for the geometric cis/trans or fac/mer isomers of [PtF(6-n)Cl(n)](2-) and [PtF(6-n)Br(n)](2-) may be expected. The discrepancies generally increase in the order [PtCl(6-n)Br(n)](2-) < [PtBr(6-n)I(n)](2-) < [PtCl(6-n)I(n)](2-) < [PtF(6-n)Br(n)](2-) ≈ [PtF(6-n)Cl(n)](2-), and show a striking correlation with the increase in electronegativity difference Δχ between the two halide ligands (X(-) and Y(-)) bound to Pt(IV) for these anions: 0.09 < 0.52 < 0.63 < 1.36 ≈ 1.27, respectively. The computed (195)Pt sensitivity to Pt-X bond displacement, ?(δ(195)Pt)/?(ΔPt-X), of these complexes is very large and depends on the halide ion, decreasing from 24 800, 18 300, 15 700 to 12 000 ppm/? for [PtF(6)](2-), [PtCl(6)](2-), [PtBr(6)](2-) and [PtI(6)](2-), respectively.     

Mononuclear Schiff base boron halides: synthesis, characterization, and dealkylation of trimethyl phosphate

A series of mononuclear boron halides of the type LBX(2) [LH = N-phenyl-3,5-di-tert-butylsalicylaldimine, X = Cl (2), Br (3)] and LBX [LH2 = N-(2-hydroxyphenyl)-3,5-di-tert-butylsalicylaldimine, X = Cl (7), Br (8); LH2 = N-(2-hydroxyethyl)-3,5-di-tert-butylsalicylaldimine, X = Cl (9), Br (10); and LH2 = N-(3-hydroxypropyl)-3,5-di-tert-butylsalicylaldimine, X = Cl (11), Br (12)] were synthesized from their borate precursors LB(OMe)2 (1) (LH = N-phenyl-3,5-di-tert-butylsalicylaldimine) and LB(OMe) [LH2 = N-(2-hydroxyphenyl)-3,5-di-tert-butylsalicylaldimine (4), N-(2-hydroxyethyl)-3,5-di-tert-butylsalicylaldimine (5), N-(3-hydroxypropyl)-3,5-di-tert-butylsalicylaldimine (6)]. The boron halide compounds were air and moisture sensitive, and upon hydrolysis, compound 7 resulted in the oxo-bridged compound 13 that contained two seven-membered boron heterocycles. The boron halide compounds dealkylated trimethyl phosphate in stoichiometric reactions to produce methyl halide and unidentified phosphate materials. Compounds 8 and 12 were found to be the most effective dealkylating agents. On reaction with tert-butyl diphenyl phosphinate, compound 8 produced a unique boron phosphinate compound LB(O)OPPh2 (14) containing a terminal phosphinate group. Compounds 1-14 were characterized by 1H, 13C, 11B, 31P NMR, IR, MS, EA, and MP. Compounds 5, 6, and 11-14 also were characterized by single-crystal X-ray diffraction.     

High-field EPR investigation of a series of mononuclear Mn(II) complexes doped into Zn(II) hosts

The five-coordinate mono-halide mononuclear Zn(II) complexes [Zn(tpa)X]⁺ (tpa = tris(2-pyridylmethyl)amine; X = I ([Zn(tpa)I]I; 1a), Br ([Zn(tpa)Br](ZnBr₄)_0.5; 2a) and Cl ([Zn(tpa)Cl](ZnCl₄)_0.5; 3a)) and the six-coordinate mononuclear complex [Zn(tpa)(NCS)₂] (4a) have been synthesized and characterized by X-ray crystallography. The [Zn(tpa)X]⁺ complexes doped with the corresponding [Mn(tpa)X₂] complexes (X = I (1b), Br (2b) and Cl (3b)) have been synthesized and their electronic properties investigated by multifrequency high field EPR (HF-EPR) (95–285 GHz). The magnetically diluted conditions allow the determination of the hyperfine coupling constant A (A = 68.10⁻⁴ cm⁻¹ for 1b–3b). The zero-field splitting parameters (D and E) found for 1b–3b are comparable to those found for neat samples of the [Mn(tpa)X₂] complexes (1b: D = 0.635 cm⁻¹, E/D = 0.189; 2b: D = 0.360 cm⁻¹, E/D = 0.192; 3b: D = 0.115 cm⁻¹, E/D = 0.200). The efficacy of using multifrequency EPR under dilute conditions to precisely determine spin Hamiltonian parameters is discussed.     

Synthesis, characterization, and DFT studies of thione and selone Cu(I) complexes with variable coordination geometries

Coordination of Cu(I) halides with N,N'-dimethylimidazole selone (dmise) and thione (dmit) ligands was examined by treating CuX (X = Cl, Br, I) with one or two equivalents of dmise or dmit. The reaction of CuI and CuBr with one molar equivalent of dmise results in unusual selenium-bridged tetrameric Cu(4)(μ-dmise)(4)(μ-X)(2)X(2) copper complexes with average Cu-Se bond lengths of 2.42 ? and a Cu(2)(μ-X)(2) core (X = I (1) or Br (6)) that's in a rhomboidal structure. The reaction of CuX (X = Cl, Br, and I) with two equivalents of dmit or dmise results in trigonal planar Cu(I) complexes of two different conformations with the formula Cu(dmit)(2)X (3a, 3b, 4, and 7) or Cu(dmise)(2)X (2, 5, and 8) with average Cu-S and Cu-Se bond lengths of 2.23 ? and 2.34 ?, respectively. The coordination geometry around the copper center in complexes 1 to 8 is determined by the type of halide and chalcogenone ligand used, intramolecular π-π interactions, and short contact interactions between X-H (X = I, Br, Cl, Se or S). The theoretical DFT calculations are in good agreement with experimental X-ray structural data and indicate that dmise ligands are required for formation of the tetrameric complexes 1 and 6. Electrochemical studies show that the trigonal copper selone complexes have more negative potentials relative to analogous copper thione complexes by an average of 108 mV.     

Well-defined N-heterocyclic carbene silver halides of 1-cyclohexyl-3-arylmethylimidazolylidenes: synthesis, structure and catalysis in A3-reaction of aldehydes, amines and alkynes

Structurally well-defined N-heterocyclic carbene silver chlorides and bromides supported by 1-cyclohexyl-3-benzylimidazolylidene (CyBn-NHC) or 1-cyclohexyl-3-naphthalen-2-ylmethylimidazolylidene (CyNaph-NHC) were synthesized by reaction of the corresponding imidazolium halides with silver(I) oxide while cationic bis(CyBn-NHC) silver nitrate was isolated under similar conditions using imidazolium iodide in the presence of sodium nitrate. Single-crystal X-ray diffraction revealed a dimeric structure through a nonpolar weak-hydrogen-bond supported Ag-Ag bond for 1-cyclohexyl-3-benzylimidazolylidene silver halides [(CyBn-NHC)AgX](2) (X = Cl, 1; Br, 2) but a monomeric structure for N-heterocyclic carbene silver halides with the more sterically demanding 1-cyclohexyl-3-naphthalen-2-ylmethylimidazolylidene ligand (CyNaph-NHC)AgX (X = Cl, 4; Br, 5). Cationic biscarbene silver nitrate [(CyBn-NHC)(2)Ag](+)NO(3)(-)3 assumed a cis orientation with respect to the two carbene ligands. The monomeric complexes (CyNaph-NHC)AgX 4 and 5 showed higher catalytic activity than the dimeric [(CyBn-NHC)AgX](2)1 and 2 as well as the cationic biscarbene silver nitrate 3 in the model three component reaction of 3-phenylpropionaldehyde, phenylacetylene and piperidine with chloride 4 performing best and giving product in almost quantitative yield within 2 h at 100 °C. An explanation for the structure-activity relationship in N-heterocyclic carbene silver halide catalyzed three component reaction is given based on a slightly modified mechanism from the one in literature.     

Chemical bonding and aromaticity in trinuclear transition-metal halide clusters

Trinuclear transition-metal complexes such as Re(3)X(9) (X = Cl, Br, I), with their uniquely featured structure among metal halides, have posed intriguing questions related to multicenter electron delocalization for several decades. Here we report a comprehensive study of the technetium halide clusters [Tc(3)(μ-X)(3)X(6)](0/1-/2-) (X = F, Cl, Br, I), isomorphous with their rhenium congeners, predicted from density functional theory calculations. The chemical bonding and aromaticity in these clusters are analyzed using the recently developed adaptive natural density partitioning method, which indicates that only [Tc(3)X(9)](2-) clusters exhibit aromatic character, stemming from a d-orbital-based π bond delocalized over the three metal centers. We also show that standard methods founded on the nucleus-independent chemical shift concept incorrectly predict the neutral Tc(3)X(9) clusters to be aromatic.     

Negative ion electrospray ionization mass spectral study of dicarboxylic acids in the presence of halide ions

The negative ion electrospray ionization (ESI) mass spectra of a series of dicarboxylic acids, a pair of isomeric (cis/trans) dicarboxylic acids and two pairs of isomeric (positional) substituted benzoic acids, including a pair of hydroxybenzoic acids, were recorded in the presence of halide ions (F(-), Cl(-), Br(-) and I(-)). The ESI mass spectra contained [M--H](-) and [M+X](-) ions, and formation of these ions is found to be characteristic of both the analyte and the halide ion used. The analytes showed a greater tendency to form adduct ions with Cl(-) under ESI conditions compared with the other halide ions used. The isomeric compounds yielded distinct spectra by which the isomers could be easily distinguished. The collision-induced dissociation mass spectra of [M+X](-) ions reflected the gas-phase basicities of both the halide ion and [M--H](-) ion of the analyte. However, the relative ordering of gas-phase basicities of all analyte [M--H](-) and halide ions could not account for the dominance of chloride ion adducts in ESI mass spectra of the analytes mixed with equimolar quantities of the four halides.     

Reactivity of 2-pyridinecarboxylic esters with cadmium(II) halides: study of (113)Cd NMR solid state spectra and crystal structures of hexacoordinated complexes [CdI(2)(C(5)H(4)NCOOMe)(2)] and [CdI(2)(C(5)H(4)NCOOPr(n))(2)

The series of complexes [CdX(2)(C(5)H(4)NCOOR)] (X = Cl or Br; R = Me, Et, Pr(n)() or Pr(i)()) and [CdX(2)(C(5)H(4)NCOOR)(2)] (X = I; R = Me, Et, Pr(n)(), or Pr(i)()) have been obtained by the addition reaction of esters of 2-pyridinecarboxylic acid to cadmium(II) halides. X-ray crystal structures of two complexes [CdI(2)(C(5)H(4)NCOOR)(2)], R = Me (10) and R = Pr(n)() (12), have been determined. In both cases, the structure consists of discrete neutral monomeric units where the cadmium atom has a distorted octahedral coordination with CdI(2)N(2)O(2) core, two halides being in cis disposition. Structural information is compared with that deduced from (113)Cd CPMAS NMR experiments. Chemical shift anisotropies are discussed in terms of distortions produced in cadmium octahedra. The orientation of the principal axes of (113)Cd shielding tensor is also analyzed and related to the disposition of ligands in the structures of two analyzed compounds.     

Preparation of halogen-modified titanium(II) arene complexes and their electronic spectra

Summary Complexes of overall formula TiAl₂X₈ · Ar (X = Cl, Br or I, Ar = benzene or hexamethylbenzene) and the complexes containing various amounts of Br or I in addition to Cl were prepared both by a direct synthesis — the reduction of titanium tetrahalide by aluminium in the aromatic solvent and in excess of the corresponding aluminium halide — and by halogen exchange between the complexes and aluminium halides. The interpretation of the electronic spectra of the complexes is given on the assumption of pseudooctahedral symmetry of the ligand field. The values of 10 Dq and B obtained are compatible with the assignment.     

Confinement of halide ions within homologous inverse coordination hosts; modification of halide-ion selectivity

The structures of a series of spherical host-guest complexes [{MeE(PPh)(3)Li(4)·3thf}(4)(μ(4)-X)](-) (E = Al, [1X](-); E = Ga, [2X](-); E = In, [3X](-)) reveal that changing the halide ions (X = Cl, Br, or I) within their central tetrahedral Li(4) sites has negligible effect on the structural parameters.     

Electron-Transfer Reactions of Re(CO)(5): Atom-Transfer-Concerted Mechanism vs Bimetallic Intermediate Formation

Flash photochemically generated Re(CO)(5) reacts with halide complexes, Cu(Me(4)[14]-1,3,8,10-tetraeneN(4))X(+), Cu(Me(2)pyo[14]trieneN(4))X(+), and Ni(Me(2)pyo[14]trieneN(4))X(+) (X = Cl, Br, I) and ion pairs, [Co(bipy)(3)(3+), X(-)]. The rate constants for the electron transfers have values, k approximately 10(9) M(-1) s(-1), close to expectations for processes with diffusion-controlled rates. Reaction intermediates, probably bimetallic species, were detected in electron-transfer reactions of Re(CO)(5) with Cu(Me(6)[14]dieneN(4))X(+), (X = Cl, Br, I). In the absence of the halides X(-), the electron-transfer reactions between Re(CO)(5) and these complexes are slow, k < 10(6) M(-1) s(-1). The results are discussed in terms of inner-sphere pathways, namely an atom-transfer-concerted mechanism. The mediation of bimetallic intermediates in the electron transfer is also considered.     

Ionic transformations in extremely nonpolar fluorous media: phase transfer catalysis of halide substitution reactions

Fluorous solutions of alkyl halides Rf8(CH2)mX (m = 2, 3; X = Cl, Br, I) are inert toward solid or aqueous NaCl, NaBr, and KI, but halide substitution occurs in the presence of fluorous phosphonium salts (10 mol %, 76-100 degrees C).     

Ligand dependence of metal-metal bonding in the d(3)d(3) dimers M(2)X(9)(n-) (M(III) = Cr, Mo, W; M(IV) = Mn, Tc, Re; X = F, Cl, Br, I)

The ligand dependence of metal-metal bonding in the d(3)d(3) face-shared M(2)X(9)(n-) (M(III) = Cr, Mo, W; M(IV) = Mn, Tc, Re; X = F, Cl, Br, I) dimers has been investigated using density functional theory. In general, significant differences in metal-metal bonding are observed between the fluoride and chloride complexes involving the same metal ion, whereas less dramatic changes occur between the bromide and iodide complexes and minimal differences between the chloride and bromide complexes. For M = Mo, Tc, and Re, change in the halide from F to I results in weaker metal-metal bonding corresponding to a shift from either the triple metal-metal bonded to single bonded case or from the latter to a nonbonded structure. A fragment analysis performed on M(2)X(9)(3-) (M = Mo, W) allowed determination of the metal-metal and metal-bridge contributions to the total bonding energy in the dimer. As the halide changes from F to I, there is a systematic reduction in the total interaction energy of the fragments which can be traced to a progressive destabilization of the metal-bridge interaction because of weaker M-X(bridge) bonding as fluoride is replaced by its heavier congeners. In contrast, the metal-metal interaction remains essentially constant with change in the halide.     

Synthesis and Characterization of Copper(I) Complexes Containing Tri(2‐Pyridylmethyl)Amine Ligand

Reaction of copper halides CuX (X=Cl, Br, I) with tri(2‐pyridylmethyl)amine) (TPMA) in THF under N₂ affords a series of monomeric copper(I) complexes CuX(TPMA) (X=Cl ( 1 ), Br ( 2 ) and I ( 3 )). Treatment of [CuCl(TPMA)] ( 1 ) with 0.5 equivalent of 1,4‐diisocyanobenzene following by equimolar amount of NaBF₄ affords a novel binuclear complex [(TPMA)Cu(μ‐1,4‐CNC₆H₄NC)Cu(TPMA)](BF₄)₂ ( 4 ). The copper(I) halide TPMA complexes show interesting fluxional behaviors in temperature dependence in the ¹H NMR spectrum that can be explained by the dissociation and reassociation of the pyridyl group and alkylamine nitrogen of TPMA ligand. The crystal structures of 1 , 3 and 4 are determined by an X‐ray diffractometer. Complexes 1 and 3 are distorted tetrahedral coordinates with strong bonding between three pyridyl N atoms and the corresponding halide donor. Crystallographic results of 4 clearly indicates two Cu(I) ions are bridged by 1,4‐diisocyanobenzene, forming a centro‐symmetrical homobinuclear complex with a “dangling” uncoordinated pyridyl group.     

Trinuclear-based copper(I) pyrazolate polymers: effect of trimer π-acid···halide/pseudohalide interactions on the supramolecular structure and phosphorescence

Under different situations, solvothermal reactions of 3,5-diethyl-4-(4-pyridyl)-pyrazole (HL) with CuX or CuX(2) (X = Cl, Br, I, and SCN) afforded five copper(I) coordination polymers, {CuX[CuL](3)·solvent}(n) (X = Cl, 1; Br, 2; I, 3; X = SCN and solvent = MeCN, 4) and {Cu(2)I(2)[CuL](3)}(n) (5). X-ray diffraction analyses show that all the complexes have trinuclear [CuL](3) (referred as Cu(3)) secondary building units featuring planar nine-membered Cu(3)N(6) metallocycles with three peripheral pyridyl groups as connectors, which are further linked by CuX or Cu(2)X(2) motifs to generate single- or double-strand chains. Interestingly, the Cu(I) atoms within the Cu(3) units in 1-5 behave as coordinatively unsaturated π-acid centers to contact soft halide/pseudohalide X atoms of CuX and Cu(2)X(2) motifs, which lead to novel sandwich substructures of [(Cu(3))(Cu(2)X(2))(Cu(3))] (X = Br, I, and SCN) in 2-4. In addition, both the π-acid [Cu(3)]···X contacts and intertrimer Cu···Cu interactions contribute to the one-dimensional (1D) double-strand and 2D/3D supramolecular structures of 1-5. All of these complexes exhibit high thermostability and bright solid-state phosphorescence upon exposure to UV radiation at room temperature. The emissions arise from the mixtures of metal-centered charge transfer, metal to ligand charge transfer, and halide-to-ligand charge transfer excited states, and can be tuned by intermolecular π-acid [Cu(3)]···halide/pseudohalide contacts.     

碘杂环化合物的质谱研究

研究了碘杂环化合物质谱行为和电子碰撞诱导裂解途径.结果表明:3,6-二硝基-二苯并碘六环卤化物(Ⅰ、Ⅱ、Ⅲ)和3,6-二硝基-9-酮-二苯并碘六环卤化物(Ⅳ、Ⅴ、Ⅵ)的EI质谱是样品在仪器内热分解产物的混合质谱;吸附在样品上的溶剂甲酸参与了后者的热分解过程;电子碰撞诱导裂解产生的碎片离子2-卤-2′-碘-4,4′-二硝基-二苯酮(Ⅳ′、V′、Ⅵ′)是化合物Ⅳ、V、Ⅵ的主要热分解产物.     

Tetraphosphinitoresorcinarene complexes: cationic silver(I) and copper(I) halide complexes as mercurate(II) anion receptors

The reactions of mercury(II) halides with the tetraphosphinitoresorcinarene complexes [P4M5X5], where M=Cu or Ag, X=Cl, Br, or I, and P4=(PhCH2CH2CHC6H2)4(O2CR)4(OPPh2)4 with R=C6H11, 4-C6H4Me, C4H3S, OCH2CCH, or OCH2Ph, have been studied. The reactions of the complexes with HgX2 when M=Ag and X=Cl or Br occur with elimination of silver(I) halide and formation of [P4Ag2X(HgX3)], but when M=Ag and X=I, the complexes [P4Ag4I5(HgI)] are formed. When M=Cu and X=I, the products were the remarkable capsule complexes [(P4Cu2I)2(Hg2X6)]. When M=Ag and X=I, the reaction with both CuI and HgI2 gave the complexes [P4Cu2I(Hg2I5)]. Many of these complexes are structurally characterized as containing mercurate anions weakly bonded to cationic tetraphosphinitoresorcinarene complexes of copper(I) or silver(I) in an unusual form of host-guest interaction. In contrast, the complex [P4Ag4I5(HgI)] is considered to be derived from an anionic silver cluster with an iodomercury(II) cation. Fluxionality of the complexes in solution is interpreted in terms of easy, reversible making and breaking of secondary bonds between the copper(I) or silver(I) cations and the mercurate anions.     

Infrared and Raman study of some isonicotinic acid metal(II) halide and tetracyanonickelate complexes

In this study the M(IN)(2)Ni(CN)(4) [where M: Co, Ni, and Cd, and IN: isonicotinic acid, abbreviated to M-Ni-IN] tetracyanonickelate and some metal halide complexes with the following stoichiometries: M(IN)(6)X(2) (M: Co; X: Cl and Br, and M: Ni; X: Cl, Br and I) and Hg(IN)X(2) (X: Cl, Br, and I) were synthesized for the first time. Certain chemical formulas were determined using elemental analysis results. The FT-IR and Raman spectra of the metal halide complexes were reported in the 4000-0 cm(-1) region. The FT-IR spectra of tetracyanonickelate complexes were also reported in the 4000-400 cm(-1) region. Vibrational assignments were given for all the observed bands. For a given series of isomorphous complexes, the sum of the difference between the values of the vibrational modes of the free isonicotinic acid and coordinated ligand was found to increase in the order of the second ionization potentials of metals. The frequency shifts were also found to be depending on the halogen. The proposed structure of tetracyanonickelate complexes consists of polymeric layers of /M-Ni(CN)(4)/(infinity) with the isonicotinic acid molecules bound directly to the metal atom.     

Nitromethane with IBX/TBAF as a nitrosating agent: synthesis of nitrosamines from secondary or tertiary amines under mild conditions

Aliphatic or aromatic N,N-disubstituted nitrosamine was generated in fair to excellent yield from the reaction of a secondary or tertiary amine with o-iodoxybenzoic acid (IBX) or o-iodosylbenzoic acid (IBA)/R(4)NX (X = halide) and nitromethane. The product yield was strongly influenced by both the halide of R(4)NX and iodanes. IBX gave a higher yield than IBA, while the halides follow F(-) > Cl(-) > Br(-) ～ I(-). Nitrous acid formed in situ from nitromethane and IBX (or IBA)/halides is likely responsible for the observed reaction.