正交各向异性弹性平面应力的近似计算方法

本文在列赫尼茨基方法的基础之上提供一个正交各向异性弹性平面应力的近似计算方法。利用这个方法,我们处理了下面三种问题:(1)具有圆孔梁的纯弯曲;(2)具有圆形空洞的板的拉伸;(3)具有椭圆空洞的无限平面。     

Kim model for stress distribution in a hollow cylindrical superconductor

In the present work, the distributions of the stress induced by flux pinning in a cylindrical superconductor with a concentric elliptic hole are studied. The Kim model is considered for the critical state, and the analytical expression of the stress in the cylinder is derived when the concentric hole is circular. Based on the finite element method, at first, the validity of the calculation process and the accuracy of the numerical results are proved by comparing with the analytical results. Subsequently, the distributions of the stress are obtained for different ratio of the major axis and the minor axis of the elliptic hole. It is found that due to the effect of stress concentration, as the value of ratio the major axis and the minor axis becomes large, the radial and hoop stress in superconductor just increase significantly in the vicinity of the hole, and the variation of the hoop stress is more sensitive. These results have significant effects on the safety in applications of superconductor.     

Exact analytic solutions for an elliptic hole with asymmetric collinear cracks in a one-dimensional hexagonal quasi-crystal

Using the complex variable function method and the technique of conformal mapping, the anti-plane shear problem of an elliptic hole with asymmetric colfinear cracks in a one-dimensional hexagonal quasi-crystal is solved, and the exact analytic solutions of the stress intensity factors （SIFs） for mode Ⅲ problem are obtained. Under the limiting conditions, the present results reduce to the Griffith crack and many new results obtained as well, such as the circular hole with asymmetric collinear cracks, the elliptic hole with a straight crack, the mode T crack, the cross crack and so on. As far as the phonon field is concerned, these results, which play an important role in many practical and theoretical applications, are shown to be in good agreement with the classical results.     

Elliptic hole in octagonal quasicrystals

The stress potential function theory for plane elasticity of octagonal quasicrystals is developed. By introducing stress functions, a large number of basic equations involving elasticity of octagonal quasicrystals are reduced to a single partial differential equation. Furthermore, we develop the complex variable function method (Lekhnitskii method) for anisotropic elasticity theory to that for quasicrystals. With the help of conformal transformation, an exact solution for the elliptic hole of quasicrystals is presented. The solution of the Griffith crack problem, as a special case of the results, is obtained. As a consequence, the phonon stress intensity factor is derived analytically.     

In-plane vibration of thin elliptic plates submitted to uniform pulsed microwave irradiations

The technique of acoustic generation by microwave excitation in structures is applied here to study the in-plane vibration of full or hollowed elliptic plates. The absorption of pulsed microwave irradiations by a material causes a sudden rise of its temperature and the generation of an acoustic wave by thermoelastic effect. A semi-analytic theoretical model is developed to predict the in-plane displacement fields in elliptic thin plates submitted to a uniform temperature rise. It is assumed that the isotropic and viscoelastic plate constitutive material is submitted to a thermoelastic excitation under a plane stress state. The wave equations that govern the Helmholtz displacement potentials are resolved in an elliptic cylindrical system of coordinates by means of infinite angular and radial Mathieu functions series. The displacement field is finally obtained by taking into account the zero stress conditions on the boundaries of the plates. The comparison between the theoretical and the experimental responses of full and hollowed elliptic plates shows a good agreement that permits the validation of the developed model.     

Elliptic holes in octagonal quasicrystals

The stress potential function theory for the plane elasticity of octagonal quasicrystals is developed. By introducing stress functions, a large number of basic equations involving the elasticity of octagonal quasicrystals are reduced to a single partial differential equation. Furthermore, we develop the complex variable function method (Lekhnitskii method) for anisotropic elasticity theory to that for quasicrystals. With the help of conformal transformation, an exact solution for the elliptic hole of quasicrystals is presented. The solution of the Griffith crack problem, as a special case of the results, is obtained. As a consequence, the phonon stress intensity factor is derived analytically.     

Screw dislocations interacting with two asymmetrical interfacial cracks emanating from an elliptical hole

The interaction between screw dislocations and two asymmetrical interfacial cracks emanating from an elliptic hole under loads at infinity is studied. The closed-form solution is derived for complex potentials. The stress intensity factor and the critical applied stress for the dislocation emission are also calculated. In the limiting cases, well-known results can be obtained from the present solutions. Moreover, new exact solutions for a screw dislocation interacting with some complicated cracks are derived. The results show that the shielding effect increases with the increase in the length of the other cracks and the minor semi axis, but decreases with the increase of dislocation azimuth. The repulsion acting on the dislocation from the other phase and the other crack extend in the horizontal direction, which makes the dislocation emission at the crack tip take place more easily, but the minor semi axis of the elliptical hole extending in the vertical direction makes it more difficult.     

激光冲击强化“残余应力洞”的形成机制

利用ABAQUS有限元软件进行了单个圆形高斯光斑的激光冲击强化数值模拟,分析材料表面光斑中心区域形成的"残余应力洞"现象,并通过分析材料的动态力学响应特征揭示了"残余应力洞"的形成机制。结果表明:在冲击波加载时,光斑边界处会产生很强的剪切应力,形成向四周传播的表面稀疏波和向材料内部传播的剪切波。当稀疏波同时传播到光斑中心,发生相遇、汇聚,使材料产生急剧的上下位移过程,造成冲击波加载塑性变形后的二次塑性变形。二次塑性变形中形成了较大的剪切塑性应变,并降低了冲击波加载阶段产生的轴向和径向塑性应变,使残余压应力降低,从而形成"残余应力洞"。     

Accuracy and sensitivity of a hole drilling and digital speckle pattern interferometry combined technique to measure residual stresses

This paper reports on the accuracy and sensitivity of digital speckle pattern interferometry (DSPI) when it is combined with the hole drilling technique for measuring residual stresses. The in-plane displacement field generated by the introduction of a small hole is determined using an automated data analysis approach. This method is based on the calculation of the optical phase distribution through a phase-shifting method and the application of a robust iterative phase unwrapping algorithm. It is experimentally demonstrated that residual stresses can be measured with a relative uncertainty of 7.5%. It is also shown that the minimum value of residual stress that can be determined with the DSPI and hole drilling combined technique is about 10% of the yield stress of the material.     

Verzerrung anisotroper Körper durch Versetzungen mit Anwendung auf die Berechnung der Röntgenintensität

An elastic state in arbitrarily anisotropic cylinders is considered for the case in which the displacement does not vary in the direction of the axis. The first and second boundary-value problem are solved for the half-plane and the infinite plane with an elliptic hole as cross sections of the cylinders. With the aid of these solutions one can treat further domains by the method of successive approximation. For a general cross section the problem leads to a system of integral equations. The strain fields about straight dislocation lines parallel to the surface (which may be free from applied stress) are special cases of the treated state of deformation. The solution is given for 1) dislocations in a half-space, 2) dislocations in an infinite plate (through a recursion formula), 3) a dislocation in an infinite solid out of which an elliptic cylinder is cut containing the dislocation line. — From the strain one obtains a formula for the intensity distribution of X-rays reflected under certain conditions by a dislocation parallel to the surface of a half-space. Numerical results are given for two dislocations in Germanium.     

Complex variable method for plane elasticity of icosahedral quasicrystals and elliptic notch problem

The complex variable method for the plane elasticity theory of icosahedral quasi-crystals is developed. Based on the general solution obtained previously, complex representations of stress and displacement components of phonon and phason fields in the quasicrystals are given. With the help of conformal transformation, an analytic solution for the elliptic notch problem of the material is presented. The solution of the Griffith crack problem can be observed as a special case of the results. The stress intensity factor and energy release rate of the crack are also obtained.     

Exact Solution to Geodesic Motion Equation in the Braneworld Black Hole Spacetime and the Perihelion Precession of Mercury

The exact solution to geodesic equation in the braneworld black hole spacetime is found by method of Jacobian elliptic function, and the angle of perihelion precession is obtained by the zero point of Jacobian elliptic function for Mercury. Comparing numerical result with observation data, we give the value range of tidal charge.     

Elastic analysis of an elliptic notch in quasicrystals of point group 10 subjected to shear loading

Based on the stress potential and complex variable function method, this paper makes an elastic analysis of an elliptic notch subjected to uniform shear stress at infinity in quasicrystals with point group 10. With the aid of conformal transformation, an exact solution for the elliptic notch of the quasicrystals is obtained. The solution of the mode {\rm II} Griffith crack as a special case is constructed. The stress intensity factor and energy release rate have been also obtained as a direct result of the crack solution.     

Letter: Charged Black Hole Solutions in Einstein-Born-Infeld Gravity with a Cosmological Constant

We construct black hole solutions to Einstein-Born-Infeld gravity with a cosmological constant. Since an elliptic function appears in the solutions for the metric, we construct horizons numerically. The causal structure of these solutions differs drastically from their counterparts in Einstein-Maxwell gravity with a cosmological constant. The charged de-Sitter black holes can have up to three horizons and the charged anti-de Sitter black hole can have one or two depending on the parameters chosen.     

Stresses in silicon crystals from ion-implanted amorphous regions

The plane elasticity problem of the interaction between an edge dislocation and an elliptical inhomogeneity is solved, and the image glide-force on dislocation is computed. Contour plots of the force exterted by either an elliptic hole (crack) or a rigid elliptical inhomogeneity show that force is stronger for more elongated shapes, and that in some cases dislocation trapping effects undergo drastic changes even for slight shape variations. The general case is investigated by means of angular plots of force. They show increasing oscillatory angular depence on increasing both elongation and shear moduli difference.     

On the existence of non‐supersymmetric black hole attractors for two‐parameter Calabi‐Yau's and attractor equations

We look for possible nonsupersymmetric black hole attractor solutions for type II compactification on (the mirror of) CY₃(2,128) expressed as a degree‐12 hypersurface in WCP ⁴[1,1,2,2,6]. In the process, (a) for points away from the conifold locus, we show that the existence of a non‐supersymmetric attractor along with a consistent choice of fluxes and extremum values of the complex structure moduli, could be connected to the existence of an elliptic curve fibered over C ⁸ which may also be “arithmetic” (in some cases, it is possible to interpret the extremization conditions for the black‐hole superpotential as an endomorphism involving complex multiplication of an arithmetic elliptic curve), and (b) for points near the conifold locus, we show that existence of non‐supersymmetric black‐hole attractors corresponds to a version of A₁‐singularity in the space Image( Z ⁶→ R ²/ Z ₂ (↪ R ³)) fibered over the complex structure moduli space. The (derivatives of the) effective black hole potential can be thought of as a real (integer) projection in a suitable coordinate patch of the Veronese map: CP ⁵→ CP ²⁰, fibered over the complex structure moduli space. We also discuss application of Kallosh's attractor equations (which are equivalent to the extremization of the effective black‐hole potential) for nonsupersymmetric attractors and show that (a) for points away from the conifold locus, the attractor equations demand that the attractor solutions be independent of one of the two complex structure moduli, and (b) for points near the conifold locus, the attractor equations imply switching off of one of the six components of the fluxes. Both these features are more obvious using the attractor equations than the extremization of the black hole potential.     

Uniqueness and nonuniqueness in the Einstein constraints

The conformal thin-sandwich (CTS) equations are a set of four of the Einstein equations, which generalize the Laplace-Poisson equation of Newton's theory. We examine numerically solutions of the CTS equations describing perturbed Minkowski space, and find only one solution. However, we find two distinct solutions, one even containing a black hole, when the lapse is determined by a fifth elliptic equation through specification of the mean curvature. While the relationship of the two systems and their solutions is a fundamental property of general relativity, this fairly simple example of an elliptic system with nonunique solutions is also of broader interest.     

Elliptic nanopores in deformed nanocrystalline and nanocomposite materials

A theoretical model is suggested which describes the nucleation of nanoscale pores (nanopores) of elliptic shape in deformed nanocrystalline and nanocomposite materials. In the framework of the model, elliptic nanopores in nanocrystalline and nanocomposite materials nucleate at interfaces in the stress fields of interfacial edge dislocations with large Burgers vectors. When elliptic nanopores nucleate, they remove the cores of interfacial dislocations. The stress field and energy of such dislocated elliptic nanopores are calculated, and their equilibrium sizes and shape parameters are revealed. It is theoretically shown that the elliptic shape of nanopores is due to the effects of interfaces (grain and interphase boundaries) on fracture processes at the nanoscale level.     

Elastic fields around a nanosized elliptic hole in decagonal quasicrystals

Based on the variational principle, a continuum theory of surface elasticity and new boundary conditions for qua- sicrystals is proposed. The effect of the residual surface stress on a decagonal quasicrystal that is weakened by a nanoscale elliptical hole is considered. The explicit expressions for the hoop stress along the edge of the hole are obtained using the Stroh formalism. The results show that the residual surface stress and the shape of the hole have a significant effect on the elastic state around the hole.     

Laser pulse optimization for practical laser drilling

Laser drilling is a common commercially developed technique for material processing. From the application viewpoint, it is the end product for a laser system, for instance a drilled hole, that matters. Laser pulse profile is the most important parameter controlling the laser hole drilling process. An efficient and practical method is therefore needed to develop a relationship between the pulse parameters and the depth of hole produced in a known material. In the present study, dimensionless groups are developed to optimize laser pulse parameters to give information on workpiece materials. Consequently, an optimal laser pulse for drilling an aluminum workpiece is predicted.