2,4-/2,6-二氨基甲苯在D151树脂上的吸附分离

从10种树脂中筛选出D151树脂对2,4-二氨基甲苯和2,6-二氨基甲苯的吸附分离及其热力学性质进行了研究。 测定了吸附等温线,Freundlich模型对实验的拟合度大于Langmuir模型,其相关系数大于0.99。 热力学研究结果表明,在293～313 K条件下,初始质量浓度为60～80 g/L时,2,4-二氨基甲苯的吸附焓变为-4.3490～-5.7558 kJ/mol,自由能变为-0.2911～-1.0346 kJ/mol,吸附熵变为-12.965～-16.150 J/(mol·K);而2,6-二氨基甲苯的吸附焓变为-2.9645～-3.6054 kJ/mol,自由能变为-0.1610～-0.6384 kJ/mol,吸附熵变为-7.939～-11.005 J/(mol·K)。 进一步研究了D151树脂对二氨基甲苯的动态吸附分离,可以将2,6-二氨基甲苯含量从20%提高至99.93%,将2,4-二氨基甲苯含量从80%提高至99.42%。     

2-异戊基环戊酮虚拟模板印迹微球的制备及其吸附性能

以2-异戊基环戊酮为虚拟模板,采用沉淀聚合法制备了粒径20~50 μm的分子印迹微球。 用傅里叶变换红外光谱(FTIR)和扫描电子显微镜(SEM)研究了分子印迹微球的表面化学特征及粒径分布,测试了印迹聚合物对玫瑰醚的吸附动力学、等温吸附性能及吸附选择性。 考察了分子印迹固相萃取玫瑰醚的应用效能。 结果表明:分子印迹聚合物(MIPs)对玫瑰醚的吸附可在25 min达到平衡,具有较快的吸附动力学,一级动力学模型更适合描述其吸附动力学行为。 Freundlich模型最适合描述MIPs对玫瑰醚的等温吸附行为,聚合物材料最大的印迹位点数目为149.3 μmol/g。 聚合物对玫瑰醚的平均吸附能为166 kJ/mol,表明主要为化学吸附。 虚拟模板印迹聚合物对玫瑰醚的选择因子相对于香叶醇和香茅醇分别为3.710和5.636,且对含玫瑰醚的混合物中的目标化合物仍具有较高的选择吸附能力(竞争吸附量为18.02 mg/g)。 在优化洗涤(1 mL乙腈+1 mL乙腈和水混合溶剂(体积比9.5:0.5)+2 mL乙腈、甲醇和水混合溶剂(体积比8:1:2)和洗脱(3 mL甲醇和醋酸混合溶剂(体积比9:1))条件下,通过分子印迹固相萃取可实现玫瑰醚的有效分离和富集,回收率为96.23%。     

介孔碳CMK-3对苯酚的吸附动力学和热力学研究

研究了介孔碳CMK-3对苯酚的吸附性能, 与传统商用活性碳(CAC)进行了比较, 结果表明, CMK-3比CAC的吸附量大、吸附速率快、达到平衡时间短, 是一种较好的吸附剂. 同时探讨了介孔碳CMK-3对苯酚的吸附热力学和动力学特征. CMK-3对苯酚的吸附行为可用Langmuir和Freundlich等温式进行描述, 相关性都较好, 但更符合Freundlich经验公式. 分别采用模拟一阶反应和二阶反应模型考察了吸附动力学, 并计算了这些动力学模型的速率常数. 模拟二级反应模型和实验数据之间有较好的相关性. 分别计算了热力学参数ΔG0, ΔS0和ΔH0, 结果表明, CMK-3对苯酚的吸附过程是吸热和自发的.     

Creatinine imprinted poly(hydroxyethyl methacrylate) based cryogel cartridges

Creatinine imprinted cryogel (MIP) cartridge was prepared with functional monomer N-methacryloyl-(L)-histidinemethylester (MAH) under frozen conditions. Creatinine adsorption studies and selectivity of MIP cryogel were evaluated in aqueous solution and artificial urine sample. Maximum adsorbed amount of creatinine was calculated as 6.83 mg/g polymer for MIP cryogel. Langmuir and Freundlich adsorption isotherm models were used to investigate the adsorption behaviour of creatinine. In the artificial urine sample; recovery amounts of creatinine were found 34.7–46.2%. Creatinine imprinted cryogel (MIP) cartridge recognized creatinine, 4.58 and 4.37 times greater competitive molecules. MIP cryogel catridge was repeatedly used many times for adsorption desorption cycles.     

Determination and pharmacokinetic study of chlorogenic acid in rat dosed with Yin-Huang granules by RP-HPLC

A reversed-phase high-performance liquid chromatographic (RP-HPLC) method was described for the determination of chlorogenic acid (CGA) in rat plasma using protocatechuic acid as internal standard (IS). CGA in plasma was extracted with acetonitrile, which also acted as deproteinization agent. Chromatographic separation was performed on a Kromasil C18 column with methanol-0.2 m acetic acid (pH 3.0, 25:75, v/v) as mobile phase at a flow-rate of 1.0 mL/min with an operating temperature of 30 degrees C and UV detection at 300 nm. The standard curve was found to be linear over the concentration ranges of 0.4-2.5 microg/mL and 2.5-40 microg/mL, and the limit of quantification (LOQ) was 0.4 microg/mL. The analytical precision and accuracy were validated by relative standard deviation (RSD) and relative error, which were in ranges 3.14-10.78% and -2.20-5.00%, respectively. The average recovery of CGA was 87.59%. The method was successfully applied to the pharmacokinetic study of CGA in Yin-Huang granules.     

Synthesis and Evaluation of Molecularly Imprinted Polymers as Sorbents for Selective Extraction of Coumarins

Coumarin, 7-hydroxycoumarin and dicoumarol molecularly imprinted polymers (MIP) were synthesized by bulk polymerization. Methacrylic acid and 4-vinylpyridine were tested as functional monomers and methanol, ethanol, acetonitrile, toluene and chloroform were tested as porogens. The binding capabilities of the imprinted polymers were assessed by equilibrium binding analysis. Highest binding capacity was obtained for MIP prepared for the template 7-hydroxycoumarin synthesized in methacrylic acid as functional monomer, chloroform as porogen and methanol/water as analyte solvent. Scanning electron microscopy analysis documented its appropriate morphology. ATR-FTIR spectra confirmed successful polymerization of MIP. Coumarin structural analogues were employed to evaluate the polymer selectivity and it was found that polymer prepared for 7-hydroxycoumarin was selective for its template molecule. Kinetic studies showed relatively fast adsorption of analytes to MIPs (1 h). Rebinding properties of MIPs were evaluated by adsorption isotherms. The calculated data fitted well with experimental data showing that Freundlich isotherm is suitable for modelling the adsorption of tested coumarins on prepared MIPs. Applicability of polymer prepared for 7-hydroxycoumarin was tested for the selective extraction of coumarins from the sample of chicory.     

Separation and purification of chlorogenic acid by molecularly imprinted polymer monolithic stationary phase

Separation and purification of chlorogenic acid by removal of the impurities compounds co-existed in the product using molecular imprinting technique was firstly reported. In this work, an in situ synthesis method was utilized for the preparation of molecularly imprinted polymer monolithic stationary phase using the impurity molecule (caffeic acid) as template, the mixture of tetrahydrofuran and isooctane as solvent, and methacrylic acid and ethyl glycol dimethacrylate as functional monomer and cross-linker, respectively. The retention behavior of the monolithic polymer to chlorogenic acid molecule, the template and several main impurities compounds in the product was studied and the adsorption capacity of compounds on the stationary phase determined by frontal chromatographic technique. A relatively weak retention of the target product molecule (chlorogenic acid) on the polymer and a strong adsorption capability of the monolith to the template and several main impurities were observed. This might mainly result from the 'shape' difference of chlorogenic acid molecule with the impurities compounds molecules. This approach was shown to be successful for the separation and purification of chlorogenic acid from the extract of Eucommia ulmodies leaves.     

Thermodynamic analysis of the heterogenous binding sites of molecularly imprinted polymers

The thermodynamic interactions of two polymers, one Fmoc-L-Trp-imprinted (MIP), the other one an unimprinted reference (NIP), with the two Fmoc-tryptophan enantiomers were studied by frontal analysis, which allows accurate measurements of the adsorption isotherms. These isotherms were acquired at temperatures of 40, 50, 60, and 70 degrees C, for sample concentrations ranging between 0.005 and 40 mM. The mobile phase used was acetonitrile with one percent acetic acid as an organic modifier. Within the measured concentration ranges, the tri-Langmuir isotherm model accounts best for the isotherm data of both enantiomers on the MIP, the bi-Langmuir model for the isotherm data of Fmoc-L-Trp on the NIP. These isotherm models were selected using three independent processes: statistical tests on the results from regression of the isotherm data to different isotherm models; calculation of the affinity energy distribution from the raw isotherm data; comparison of the experimental and the calculated band profiles. The isotherm parameters obtained from these best selected isotherm models showed that the enantiomeric selectivity does not change significantly with temperature, while the affinity of the substrates for both the MIP and the NIP decrease considerably with increasing temperatures. These temperature effects on the binding performance of the MIP were clarified by considering the thermodynamic functions (i.e., the standard molar Gibbs free energy, the standard molar entropy of adsorption, and the standard molar enthalpy of adsorption) for each identified type of adsorption sites, derived from the Van't Hoff equation. This showed that the entropy of transfer of Fmoc-L-Trp from the mobile to the MIP stationary phase is the dominant driving force for the selective adsorption of Fmoc-L-Trp onto the enantioselective binding sites. This entropy does not change significantly with increasing temperatures from 40 to 70 degrees C.     

Selective Removal of Amikacin From Simulated Polluted Water Using Molecularly Imprinting Polymer (MIP)

In the present study, the antibiotic drug Amikacin has been used as template molecule to prepare poly(methacrylic acid) based molecularly imprinting polymer using acetonitrile (Acn) as a porogenic solvent. The polymer has been characterized by FTIR, SEM analysis. The poly(MAAc) MIP has been used for effective and selective removal of Amikacin (Amk) in batch mode process. The equilibrium uptake data was fitted to various isotherm models namely, Langmuir, Freundlich, Temkin and Dubinin-Redushkevich (RD). Based on the regression values obtained, the order of fitness was DR>Freundlich>Temkin>Langmuir. The maximum adsorption capacity (Q_o), as determined using Langmuir plot was 60.60 mg/g at 30°C. The presence of the drugs Streptomycin and Gentamycin in the solution did not affect the adsorption capacity of MIP. Finally, the adsorption capacity was found to be independent of the temperature of the adsorption system.     

以分子印迹聚合物为固定相手性拆分1,1′-联-2-萘酚及其衍生物

以(R)-(+)-1,1′-联-2-萘酚为模板分子,4-乙烯基吡啶为功能单体合成了分子印迹聚合物,将其作为高效液相色谱的固定相,研究其手性识别特性。对该固定相的手性拆分的色谱条件进行了优化。实验结果表明,合成的印迹聚合物对(R)-(+)-1,1′-联-2-萘酚具有较强的亲和力和特定的选择性,能有效拆分1,1′-联-2-萘酚对映体,分离因子最高达到12.25。通过优化色谱条件,该分子印迹聚合物还能对与1,1′-联-2-萘酚结构相似的衍生物5,6,7,8,5′,6′,7′,8′-八氢-1,1′-联-2-萘酚和1,1′-联萘-2-氨基-2′-酚进行手性拆分,分离因子分别达到1.51和2.40。     

Modeling of overloaded gradient elution of nociceptin/orphanin FQ in reversed-phase liquid chromatography

The Reversed-phase (RP) gradient elution chromatography of nociceptin/orphanin FQ (N/OFQ), a neuropeptide with many biological effects, has been modeled under linear and non-linear conditions. In order to do this, the chromatographic behavior has been studied under both linear and nonliner conditions under isocratic mode at different mobile phase compositions--ranging from 16 to 19% (v/v) acetonitrile (ACN) in aqueous trifluoracetic acid (TFA) 0.1% (v/v)-on a C-8 column. Although the range of mobile phase compositions investigated was quite narrow, the retention factor of this relatively small polypeptide (N/OFQ is a heptadecapeptide) has been found to change by more than 400%. In these conditions, gradient operation resulted thus to be the optimum approach for non-linear elution. As the available amount of N/OFQ was extremely reduced (only a few milligrams), the adsorption isotherms of the peptide, at the different mobile phase compositions examined, have been measured through the so-called inverse method (IM) on a 5 cm long column. The adsorption data at different mobile phase compositions have been fitted to several models of adsorption. The dependence of the isotherm parameters on the mobile phase composition was modeled by using the linear solvent strength (LSS) model and a generalized Langmuir isotherm that includes the mobile phase composition dependence. The overloaded gradient separation of N/OFQ has been modeled by numerically solving the equilibrium-dispersive (ED) model of chromatography under a selected gradient elution mode, on the basis of the previously determined generalized Langmuir isotherm. The agreement between theoretical calculations and experimental overloaded band profiles appeared reasonably accurate.     

Selective recognition of 4-nitrophenol from aqueous solution by molecularly imprinted polymers with functionalized tetratitanate whisker composites as support

Three kinds of molecularly imprinted polymers (MIPs) were obtained with surface molecular imprinting technique on functionalized potassium tetratitanate whisker (F-PTW). The results of adsorption experiments indicated that MIP prepared using PTW modified with N-(2-aminoethyl)-3-(trimethoxysilyl)propylamine (AAPTS) (F-PTW A) as support [MIP(1)] was superior to the other two polymers, then MIP(1) was selected to analyze the 4-nitrophenol (4-NP) adsorption process from aqueous solution in this study. AAPTS offered hydrophilic exterior that allowed to self-assemble with the template 4-NP through intermolecular interaction rather than based on the interactions between the functional monomers and template. Equilibrium adsorption data were analyzed by the Langmuir and Freundlich isotherm models at various temperatures. Kinetic properties were successfully investigated by pseudo-first-order model, pseudo-second-order model, intraparticle diffusion equation, initial adsorption rate, half-adsorption time. A diffusion-controlled process as the essential adsorption rate-controlling step was also proposed. The performance of such imprinted polymer was further demonstrated by high-performance liquid chromatography, and the results showed that the selectivity of MIP(1) exhibited higher affinity for template 4-NP over competitive phenolic compounds than that of non-imprinted polymer NIP(1). MIP(1) could be reused four times without significant loss in the adsorption capacity.     

Studies on Adsorption Behavior and Mechanism of Copper（ Ⅱ ） onto Amino Methylene Phosphonic Acid Resin

IntroductionThe adsorption ability of the functional poly-mer used to enrich metal ions is strong and the op-eration of the functional polymer is convenient.The polymer having adsorbed metal ions can be re-covered by means of an acid or an alkaline solutionand the recovered polymeric material can bereused.The adsorption ability of the polymer withvarious functional groups is different for differentmetals.Because nucleophilic atoms such as oxy-gen,nitrogen,sulphur and phosphorous atoms cancoord…     

Removal of methyl violet from aqueous solution by perlite

The use of perlite for the removal of methyl violet from aqueous solutions at different concentration, pH, and temperature has been investigated. Adsorption equilibrium is reached within 1 h. The capacity of perlite samples for the adsorption of methyl violet was found to increase with increasing pH and temperature and decrease with expansion and increasing acid-activation. The adsorption isotherms are described by means of the Langmuir and Freundlich isotherms. The adsorption isotherm was measured experimentally at different conditions and the experimental data were correlated reasonably well by the adsorption isotherm of Langmuir. The order of heat of adsorption corresponds to a physical reaction. It is concluded that the methyl violet is physically adsorbed onto the perlite. The removal efficiency (P) and dimensionless separation factor (R) have shown that perlite can be used for removal of methyl violet from aqueous solutions, but unexpanded perlite is more effective.     

Characteristic of theophylline imprinted monolithic column and its application for determination of xanthine derivatives caffeine and theophylline in green tea

Theophylline imprinted monolithic columns were designed and prepared for rapid separation of a homologous series of xanthine derivatives, caffeine, and theophylline by an in situ thermal-initiated copolymerization technique. Caffeine and theophylline were fully separated both under isocratic and gradient elutions on this kind of monolithic molecularly imprinted polymers (MIP) column. The broad peak showed in isocratic elution could be improved in gradient elution. Some chromatographic conditions such as mobile phase composition, flow rate, and the temperature on the retention times were investigated. Hydrogen bonding interaction and hydrophobic interaction played an important role in the retention and separation. The binding capacity was evaluated by static adsorption and Scatchard analysis, which showed that the dissociation constant (KD) and the maximum binding capacity (Qmax) were 1.50 mol/L, and 236 micromol/g for high affinity binding site, and 7.97 mol/L and 785 micromol/g for lower affinity binding site, respectively. Thermodynamic data (DeltaDeltaH and DeltaDeltaS) obtained by Van't Hoff plots revealed an enthalpy-controlled separation. The morphological characteristics of monolithic MIP were investigated by scanning electron microscope, which showed that both mesopores and macropores were formed in the monolith. The present monolithic MIP column was successfully applied for the quantitative determination of caffeine and theophylline in different kinds of green tea.     

Cationic dye adsorption by poly(N-isopropylacrylamide/maleic acid) copolymeric hydrogels prepared by gamma rays

N-isopropylacrylamide/maleic acid hydrogels containing different quantities of maleic acid have been synthesized with γ-radiation. The hydrogels were used in experiments on swelling, diffusion and adsorption of a cationic dye methylene blue. The diffusion of MB into the hydrogels was found to be the non-Fickian type. The factors influencing adsorption capacity of the hydrogel such as gel composition, and irradiation dose were systematically investigated. The equilibrium data for dye adsorption was better described by the Freundlich isotherm than Langmuir isotherm model. The kinetic studies showed that the pseudo-second-order kinetic model fits better than the data obtained from pseudo-first-order model.     

Numerical determination of competitive adsorption isotherm of mandelic acid enantiomers on cellulose-based chiral stationary phase

The use of inverse method for the determination of competitive adsorption isotherm of mandelic acid enantiomers on cellulose tris(3,5-diethylphenyl carbamate) stationary phase is proposed in this work. Non-dominated sorting genetic algorithm with jumping genes (NSGA-II-JG) was applied to acquire the isotherm parameters by minimizing the sum of square deviations of the model predictions from the measured elution profiles. Three different competitive isotherm models, i.e., Langmuir, biLangmuir and Tóth, combined with transport-dispersive chromatographic model were used in predicting the elution profiles. Orthogonal collocation on finite element (OCFE) method was applied to obtain the calculated elution profiles. Results indicate that biLangmuir isotherm and Tóth isotherm give remarkably similar equilibrium isotherms within the investigated liquid concentration range. Band profiles calculated from both isotherm models are in good agreement with the experimental data. The validity of the determined parameters was verified by comparing the model predictions with experimental elution profiles at various experimental conditions.     

Adsorption of uranium from crude phosphoric acid using activated carbon

The adsorption of uranium from crude phosphoric acid has been investigated using conventional activated carbons. It was found that treatment with nitric acid oxidized the surface of activated carbon and significantly increased the adsorption capacity for uranium in acidic solutions. The parameters that affect the uranium(VI) adsorption, such as contact time, solution pH, initial uranium(VI) concentration, and temperature, have been investigated. Equilibrium data were fitted to a simplified Langmuir and Freundlich isotherms for the oxidized samples which indicate that the uranium adsorption onto the activated carbon fitted well with Langmuir isotherm than Freundlich isotherm. Equilibrium studies evaluate the theoretical capacity of activated carbon to be 45.24 g kg^?1.     

Enantioseparation of 1-phenyl-1-propanol on cellulose-derived chiral stationary phase by supercritical fluid chromatography II. Non-linear isotherm

The separation of the enantiomers of 1-phenyl-1-propanol by supercritical fluid chromatography on a chiral stationary phase, which consists of cellulose tris (3,5-dimethylphenylcarbamate) coated on a silica support (Chiralcel-OD), is studied under overloaded, non-linear chromatographic conditions. Pulse experiments are performed at a temperature of 30 degrees C using supercritical CO(2) modified with methanol as a mobile phase. The parameters of the binary Langmuir adsorption isotherm are determined by the inverse method, comparing experimental and simulated peak responses. Isotherm parameters are derived for modifier concentrations between 1 and 5% (w/w) and operating pressures between 125 and 185 bar, and the dependency of the isotherm parameters, namely the Henry constant and the saturation capacity, on operating conditions is investigated.     

Oxalic acid removal from wastewater using multi-walled carbon nanotubes: Kinetic and equilibrium analysis

Oxalic acid adsorption from aqueous solution is studied in this work. Multi-walled carbon nanotubes (MWCNT) were used as an adsorbent. The investigated adsorption variables are equilibrium time, initial acid concentration, and temperature. The experimental results were presented using equilibrium isotherm and kinetic models. The used equilibrium models are Langmuir, Freundlich, and Temkin adsorption isotherms. And the kinetic models are Elovich, Lagergren pseudo-first-order and pseudo-second-order kinetic models. The thermodynamics studies were carried out at three different temperatures: 278, 298, and 318 K. Langmuir isotherm was the best fitted equilibrium model for the experimental data. The all applied kinetic models fitted the data suitably.