Genotyping and haplotyping of the dopamine D4 receptor gene by capillary electrophoresis

In this paper we report on simultaneous genotyping of adjacent polymorphisms (referred to as haplotyping) by combining double-tube allele-specific polymerase chain reaction, restriction fragment length polymorphism and capillary gel electrophoresis analysis of the resulting fragments. Direct molecular haplotyping is of particular importance in the case of double heterozygote samples, since in these instances the haplotype structure cannot be constructed based on genotype data. Our approach provided a powerful tool for coincidental genotype analysis of the 48 base pair (bp) variable number of tandem repeats of the third exon and haplotype investigation of the -616CG and -521CT single nucleotide polymorphisms of the dopamine D4 receptor (DRD4) gene. The linear polyacrylamide sieving matrix was optimized for the size range of the double-stranded DNA fragments of interest varying from 35 to 763 bp. We demonstrated that capillary gel electrophoresis in combination with laser induced fluorescence detection offers a sensitive and accurate tool for automated haplotyping in clinical settings.     

Validation of a tentative microsatellite marker for the dopamine D4 receptor gene by capillary gel electrophoresis

Two to four-basepair-short tandem repeats (i.e. microsatellites) are broadly utilized as genetic markers for mapping disease loci in whole genome search analyses. Based on their close vicinity on chromosome 11, the D11S1984 microsatellite was anticipated as a tentative marker for the dopamine D4 receptor gene. A capillary gel electrophoresis based genotype analysis method and an in-house made computational tool was developed for the analysis of the D11S1984 microsatellite marker to examine a healthy Hungarian population of n=106. The data obtained did not suggest significant linkage between the D11S1984 marker and the DRD4 gene.     

Genotyping the -521C/T functional polymorphism in the promoter region of dopamine D4 receptor (DRD4) gene

The -521C/Tsingle nucleotide polymorphism (SNP) in the promoter region of the dopamine D4 receptor gene (DRD4) has recently been detected in oriental (Japanese) individuals and related to novelty seeking and schizophrenia. Here, we report the analysis of the -521C/T polymorphism in a Caucasian (Hungarian) population using two independent genotyping methods. The polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) procedure utilized the Fspl restriction site around the -521 position. An additional, nonpolymorphic cleavage site was also included into the amplified region to serve as an internal standard for verifying the completion of the digestion. As another independent method, a tetraprimer system for single-tube allele-specific PCR (SAS-PCR) was developed to generate -521C and -521T specific PCR products with different fragment sizes. Consequently, genotyping with SAS-PCR is based on the gel-electrophoretic separation of the allele-specific double-stranded DNA (dsDNA) fragments. 119 healthy Hungarian individuals were genotyped for -521C/T polymorphism of the dopamine D4 promoter region, using both methods. Similar allele frequencies were found (-521C allele: 0.43; -521T allele: 0.57) as reported earlier for the Japanese population.     

Rapid and sensitive genotyping of dopamine D4 receptor tandem repeats by automated ultrathin-layer gel electrophoresis

Prior studies have revealed possible association between the presence of a seven repeat of the 48 bp variable number tandem repeat polymorphism of the human dopamine D4 receptor gene (DRD4) and some normal and pathological human traits, such as novelty seeking, hyperactivity disorders, and substance abuse. Some reports supported this finding whereas others did not. Incorrect genotyping could be one of the reasons for these controversial results, and might originate from preferential amplification of shorter polymerase chain reaction (PCR) products, resulting in the so-called allele dropout. In this paper we optimized the conditions for simultaneous amplification of shorter and longer amplicons of the 48 bp repeat region of the DRD4 gene in order to avoid the loss of the longer allele and consequent incorrect genotyping, using very low DNA template concentrations and partial replacement of 2'-deoxyguanosine-5'-triphosphate (dGTP) by 2'-deoxyinosine-5'-triphosphate (dITP). The optimized PCR method in combination with high throughput automated ultrathin-layer gel electrophoresis was suitable for rapid genotyping from less than a nanogram DNA using noninvasive sampling (buccal epithelial cells). All detected genotypes are presented, including such rear heterozygotes as the 2 x and 8 x 48 bp repeats in the same sample, showing the reliability of our novel detection method of longer alleles in the presence of shorter alleles.     

High resolution DNA separations using microchip electrophoresis

Planar microfluidic devices have emerged as effective tools for the electrophoretic separation of a variety of different DNA inputs. The advancement of this miniaturized platform was inspired initially by demands placed on electrophoretic performance metrics by the human genome project and has provided a viable alternative to slab gel and even capillary formats due to its ability to offer high resolution separations of nucleic acid materials in a fraction of the time associated with its predecessors, consumption of substantially less sample and reagents while maintaining the ability to perform many separations in parallel for realizing ultra-high throughputs. Another compelling advantage of this separation platform is that it offers the potential for integrating front-end sample preprocessing steps onto the separation device eliminating the need for manual sample handling. This review aims to compile a recent survey of various electrophoretic separations using either glass or polymer-based microchips in the areas of genotyping and DNA sequencing as well as those involving the growing field of DNA-based forensics.     

Human dopamine D4 receptor allele genotyping by ultrathin agarose gel electrophoresis with To-Pro-3 complexation

Growing evidence shows the correlation between the allelic type of the dopamine D4 receptor and the human novelty-seeking personality trait. A sensitive, ultrathin agarose gel electrophoresis-based, high-throughput screening method was developed for genotyping the dopamine D4 receptor (D4DR) exon III 48 base pair repeat polymorphism. The efficiency of the method was increased by reamplification nested polymerase chain reaction (PCR) - of the 48 base pair repeat containing the PCR product with internal primers. The nested PCR fragments were analyzed by ultrathin layer agarose gel electrophoresis with an automated real-time laser-induced fluorescent detection system. Noncovalent affinity complexation was accomplished during the separation process by the addition of a very low concentration of intercalation dye, To-Pro-3 (2 nM) to the gel buffer system. This resulted in instant fluorescent labeling of the migrating PCR fragments. This method can readily facilitate genetic association studies between dopamine receptor genotypes and some human behavioral and neuropsychiatric disorders.     

Rapid analysis of atorvastatin calcium using capillary electrophoresis and microchip electrophoresis

In this work, a capillary electrophoretic method for the rapid quantitation of atorvastatin (AT) in a lipitor tablet was investigated and developed. Method development included studies of the effect of applied potential, buffer concentration, buffer pH, and hydrodynamic injection time on the electrophoretic separation. The method was validated with regard to linearity, precision, specificity, LOD, and LOQ. The optimum electrophoretic separation conditions were 25 mM sodium acetate buffer at pH 6, with a separation voltage of 25 kV using a 50 microm capillary of 33 cm total length. Sodium diclofenac was used as an internal standard. Analysis of AT in a commercial lipitor tablet by electrophoresis gave quite high efficiency, coupled with an analysis time of less than 1.2 min in comparison to LC. Once the separation was optimized on capillary, it was further miniaturized to a microchip platform, with linear imaging UV detection using microchip electrophoresis (MCE). Linear imaging UV detection allowed for real-time monitoring of the analyte movement on chip, so that the optimum separation time could be easily determined. This microchip electrophoretic method was compared to the CE method with regard to speed, efficiency, precision, and LOD. This work represents the most rapid and first reported analysis of AT using MCE.     

High-sensitivity capillary and microchip electrophoresis using electrokinetic supercharging

Electrokinetic supercharging (EKS) is considered as one of the most powerful online preconcentration techniques in electrophoresis. It combines the efficient preconcentration power of field-amplified sample injection and the exceptional selective nature of transient isotachophoresis. It has a wide range of applications to different types of analytes ranging from small ions to large proteins and DNA fragments. This comprehensive review--up to date--provides listing for all the works, developments, and advances in EKS. The review will pay particular attention to innovations, new methodologies for manipulation, challenges for improving the detection sensitivity, and various applications of EKS in capillaries and microchips.     

Protein-aptamer binding studies using microchip affinity capillary electrophoresis

The use of traditional CE to detect weak binding complexes is problematic due to the fast-off rate resulting in the dissociation of the complex during the separation process. Additionally, proteins involved in binding interactions often nonspecifically stick to the bare-silica capillary walls, which further complicates the binding analysis. Microchip CE allows flexibly positioning the detector along the separation channel and conveniently adjusting the separation length. A short separation length plus a high electric field enables rapid separations thus reducing both the dissociation of the complex and the amount of protein loss due to nonspecific adsorption during the separation process. Thrombin and a selective thrombin-binding aptamer were used to demonstrate the capability of microchip CE for the study of relatively weak binding systems that have inherent limitations when using the migration shift method or other CE methods. The rapid separation of the thrombin-aptamer complex from the free aptamer was achieved in less than 10 s on a single-cross glass microchip with a relatively short detection length (1.0 cm) and a high electric field (670 V/cm). The dissociation constant was determined to be 43 nM, consistent with reported results. In addition, aptamer probes were used for the quantitation of standard thrombin samples by constructing a calibration curve, which showed good linearity over two orders of magnitude with an LOD for thrombin of 5 nM at a three-fold S/N.     

Determination of human blood glucose levels using microchip electrophoresis

A high-performance monitoring system for human blood glucose levels was developed using microchip electrophoresis with a plastic chip. The combination of reductive amination as glucose labeling with fluorescent 2-aminoacridone (AMAC) and glucose-borate complex formation realized the highly selective detection of glucose even in a complex matrix such as a blood sample. The migration time of a single peak, observed on an electropherogram of AMAC-labeled plasma, closely resembled that of glucose standard solution. The treatment of plasma with hexokinase or glucokinase for glucose phosphorylation resulted in a peak shift from approximately 145 to 70 s, corresponding to glucose and glucose-6-phosphate, respectively. A double-logarithm plot revealed a linear relationship between glucose concentration and fluorescence intensity in the range of 1-300 microM of glucose (r(2) = 0.9963; p <0.01), and the detection limit was 0.92 microM. Furthermore, blood glucose concentrations estimated from the standard curves of three subjects were compared with results obtained by conventional colorimetric analysis using glucose dehydrogenase. Good correlation was observed between methods according to simple linear regression analysis (p <0.05). The reproducibility of the assay was about 6.3-9.1% (RSD) and the within-days and between-days reproducibility were 1.6-8.4 and 5.2-7.2%, respectively. This system enables us to determine blood glucose with high sensitivity and accuracy, and will be applicable to clinical diagnosis.     

High-throughput genotyping of repeat polymorphism in the regulatory region of serotonin transporter gene by gel microchip electrophoresis.

Large-scale genotyping of the repeat polymorphism in the regulatory region of the serotonin transporter gene (5-HTTLPR) was attempted by polymerase chain reaction (PCR) amplification followed by gel microchip electrophoresis analysis. The multilane (96) format of the gel microchip system allowed parallel separation of a large number of samples. The separation and visualization of the PCR amplicons from either the 5-HTTLPR short allele (number of repeats are 14) or the 5-HTTLPR long form (16 repeats) was completed in a few minutes. Genotyping of healthy Caucasian individuals showed that the short allele had a somewhat lower frequency (0.42) than the long form (0.58), and the genotype frequencies fulfilled the criteria of the Hardy-Weinberg equilibrium (chi = 0.012, p = 0.994). Based on these results, gel microchip electrophoresis system proved to be a powerful tool for high throughput genotyping of repeat polymorphism.     

A pharmacophore model for dopamine D4 receptor antagonists

A pharmacophore model for dopamine D₄ antagonists has been developed on the basis of a previously reported dopamine D₂ model. By using exhaustive conformational analyses (MM3^* force field and the GB/SA hydration model) and least-squares molecular superimposition studies, a set of eighteen structurally diverse high affinity D₄ antagonists have successfully been accommodated in the D₄ pharmacophore model. Enantioselectivities may be rationalized by conformational energies required for the enantiomers to adopt their proposed bioactive conformations. The pharmacophore models for antagonists at the D₄ and D₂ receptor subtypes have been compared in order to get insight into molecular properties of importance for D₂/D₄ receptor selectivity. It is concluded that the bioactive conformations of antagonists at the two receptor subtypes are essentially identical. Receptor essential volumes previously identified for the D₂ receptor are shown to be present also in the D₄ receptor. In addition, a novel receptor essential volume in the D₄ receptor, not present in the D₂ receptor, has been identified. This feature may be exploited for the design of D₄ selective antagonists. However, it is concluded that the major determinant for D₂/D₄ selectivity is the nature of the interactions between the receptor and aromatic ring systems. The effects of the electronic properties of these ring systems on the affinities for the two receptor subtypes differ substantially.     

Rapid inorganic ion analysis using quantitative microchip capillary electrophoresis

Rapid quantitative microchip capillary electrophoresis (CE) for online monitoring of drinking water enabling inorganic ion separation in less than 15 s is presented. Comparing cationic and anionic standards at different concentrations the analysis of cationic species resulted in non-linear calibration curves. We interpret this effect as a variation in the volume of the injected sample plug caused by changes of the electroosmotic flow (EOF) due to the strong interaction of bivalent cations with the glass surface. This explanation is supported by the observation of severe peak tailing. Conducting microchip CE analysis in a glass microchannel, optimized conditions are received for the cationic species K+, Na+, Ca2+, Mg2+ using a background electrolyte consisting of 30 mmol/L histidine and 2-(N-morpholino)ethanesulfonic acid, containing 0.5 mmol/L potassium chloride to reduce surface interaction and 4 mmol/L tartaric acid as a complexing agent resulting in a pH-value of 5.8. Applying reversed EOF co-migration for the anionic species Cl-, SO42- and HCO3- optimized separation occurs in a background electrolyte consisting of 10 mmol/L 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) and 10 mmol/L HEPES sodium salt, containing 0.05 mmol/L CTAB (cetyltrimethylammonium bromide) resulting in a pH-value of 7.5. The detection limits are 20 micromol/L for the monovalent cationic and anionic species and 10 micromol/L for the divalent species. These values make the method very suitable for many applications including the analysis of abundant ions in tap water as demonstrated in this paper.     

Faster and improved microchip electrophoresis using a capillary bundle

Joule heating generated in CE microchips is known to affect temperature gradient, electrophoretic mobility, diffusion of analytes, and ultimately the efficiency and reproducibility of the separation. One way of reducing the effect of Joule heating is to decrease the cross-section area of microchannels. Currently, due to the limit of fabrication technique and detection apparatus, the typical dimensions of CE microchannels are in the range of 50-200 microm. In this paper, we propose a novel approach of performing microchip CE in a bundle of extremely narrow channels by using photonic crystal fiber (PCF) as separation column. The PCF was simply encapsulated in a poly(methyl methacrylate) (PMMA) microchannel right after a T-shaped injector. CE was simultaneously but independently carried out in 54 narrow capillaries, each capillary with diameter of 3.7 microm. The capillary bundle could sustain high electric field strength up to 1000 V/cm due to efficient heat dissipation, thus faster and enhanced separation was attained.     

Analysis of double-stranded DNA by microchip capillary electrophoresis using polymer solutions containing gold nanoparticles

The impact of gold nanoparticles (GNPs) on the microchip electrophoretic separation of double-stranded (ds) DNA using poly(ethylene oxide) (PEO) is described. Coating of the 75-microm separation channel on a poly(methyl methacrylate) (PMMA) plate in sequence with poly(vinyl pyrrolidone), PEO, and 13-nm GNPs is effective to improve reproducibility and resolution. In this study, we have also found that adding 13-nm GNPs to 1.5% PEO is extremely important to achieve high resolution and reproducibility for DNA separation. In terms of the stability of the GNPs, 100 mM glycine-citrate buffer at pH 9.2 is a good buffer system for preparing 1.5% PEO. The separation of DNA markers V and VI ranging in size from 8 to 2176 base pairs has been demonstrated using the three-layer-coated PMMA microdevice filled with 1.5% PEO containing the GNPs. Using these conditions, the analysis of the polymerase chain reaction products of UGT1A7 was complete in 7 min, with the relative standard deviation values of the peak heights and migration times less than 2.3% and 2.0%, respectively. In conjunction with stepwise changes of the concentrations of ethidium bromide (0.5 and 5 microg/ml), this method allows improved resolution and sensitivity for DNA markers V and VI.     

Analysis of thrombin‐antithrombin complex formation using microchip electrophoresis and mass spectrometry

Preterm birth (PTB) related health problems take over one million lives each year, and currently, no clinical analysis is available to determine if a fetus is at risk for PTB. Here, we describe the preparation of a key PTB risk biomarker, thrombin‐antithrombin (TAT), and characterize it using dot blots, MS, and microchip electrophoresis (µCE). The pH for fluorescently labeling TAT was also optimized using spectrofluorometry and spectrophotometry. The LOD of TAT was measured in µCE. Lastly, TAT was combined with six other PTB risk biomarkers and separated in µCE. The ability to make and characterize TAT is an important step toward the development of an integrated microfluidic diagnostic for PTB risk.     

Analysis of explosives via microchip electrophoresis and conventional capillary electrophoresis: a review

The upsurge in terrorist activity has generated tremendous demand for innovative tools capable of detecting major industrial, military, and home-made (improvised) explosives. Fast, sensitive, and reliable detection of explosives in the field is a very important issue in nowadays. CE, especially in its miniaturized format (lab-on-a-chip), offers great possibilities to create portable, field deployable, rapidly responding, and potentially disposable devices, allowing security forces to make the important decisions regarding the safety of civilians. This article overviews the microchip and conventional capillary electrophoretic techniques for analysis of a wide variety of explosive compounds and mixtures.     

Automation for continuous analysis on microchip electrophoresis using flow-through sampling

Automation of electrophoretic microchips for sequential analysis of different samples is demonstrated. This system used an autosampler, which was on-line connected to the microchip and the whole process including sample loading and injection, analysis and data acquisition as well as washing were all automated. Rhodamin B at different concentrations was first loaded into a hydrodynamic flow stream by an autosampler, delivered to the microchip, and then sequentially injected into the electrophoretic microchannel for analysis and detection. Automation was achieved by running two independent programs, one for sample loading by an autosampler and the other one for electrophoretic injection by voltage switching, on the same computer. Using this sampling chip, each loaded volume (0.2-1 microL) can be injected for dozens of electrophoretic analyses (1-10 nL for each injection). The variances caused by the external connections, which did not affect the electrophoretic analysis but would cause band broadening of the loaded sample in the hydrodynamic flow stream, were theoretically deduced. Results indicate that the dead volume (approximately 300 nL) due to the connection fitting on the chip could lead to dilution of the loaded sample by a factor of one when 0.2 microL of sample was loaded. Such a design allows sequential analysis of a series of samples while the running buffer is continuously pumped into the connection capillary as well as microchannels for washing between two loaded samples to minimize cross contamination without human intervention. Using this sampling chip, the required sample amount and handling time can be greatly reduced compared to the manual method.     

Genotyping the -6A/G functional polymorphism in the core promoter region of angiotensinogen gene by microchip electrophoresis

Angiotensinogen (AGT) gene has been regarded as one of the candidate genes for essential hypertension. In our study, the role of AGT gene as a putatively predisposing gene for hypertension was evaluated by genotyping a A (-6) G polymorphism in the core promoter region in 123 patients with essential hypertension and 103 healthy controls. A microchip electrophoresis method coupled with polymorphism chain reaction (PCR)-restriction fragment length polymorphism (RFLP) assay was used for genotyping the A (-6) G single-nucleotide polymorphism. The separation and detection of the digested PCR amplicons were completed just in 280 s or less. The genotype frequency fulfilled the criteria of the Hardy-Weinbery equilibrium (X2 = 3.067, P > 0.05). The results showed a higher frequency of the -6 A allele (0.70) in the normotensive subjects, which is higher than those reported in Germany (0.47) and Czech (0.40) populations, but similar to that found in Japanese populations (0.73). The frequencies of genotype AA, AG, and GG were 0.46, 0.49, and 0.05 in hypertensive subjects, and 0.44, 0.53, and 0.03 in control subjects. There is no significant difference in the distributions of the genotype and allele between the two groups (X2 = 0.88, P > 0.05; X2 = 0.024, P > 0.05). These findings differ from some of the results obtained in other ethnic groups, indicating the potential importance of ethnic origin in the assessment of genetic risk identifiers for a complex disease.     

Analysis of geometry effects on band spreading of microchip electrophoresis

The geometry and the flow field conditions in the separation microchannel of an electrophoresis chip system may have important impact on the system's separation efficiency. Understanding the geometry effect on the flow field physics in the separation microchannel is beneficial to the design or operation of an electrophoresis system. The turns in a microfabricated separation microchannel generally results in degraded separation quality. To avoid this limitation, channels are constructed with different types of turns to determine the optimum design that minimizes turn-induced band broadening. We have designed and tested various geometric bend ratios to greatly reduce this so-called "racetrack" effect. The effects of the separation channel geometry, fluid velocity profile and bend ratio on the band distribution in the detection area are discussed. Results show that the folded square U-shaped channel is better for miniaturization and simplification. The band tilting was corrected and the racetrack effect reduced in the detection area when the bend ratio is 4:1. The detection time obtained from the present numerical solution matches very well with the experimental data.