Homogeneous transparent device and its layered realization

Arbitrarily shaped electromagnetic transparent devices with homogeneous, non-negative, anisotropic and generic constitutive parameters are proposed based on linear transformation optics, which provides the flexibility for device design that is applicable for the practical fabrication. To remove the anisotropic property, a layered structure is developed based on effective medium theory. Simulation results show that with sufficient layers, the performance of the layered transparent device is nearly as perfect as an ideal device, and it is able to protect an antenna without sacrificing its performance. The feasibility of designing a transparent device by using natural isotropic materials instead of metamaterials would dramatically reduce the difficulty of fabrication and further promote the practicality of the device.     

基于单片机的数字化调光装置的设计与实现

介绍了一种光学仪器照明调光电路的创新设计。通过由Atmega8单片机微控制器产生的PWM信号来控制卤钨灯的亮度。照明调光电路具有电路简单,光强输出稳定,其亮度可数字化线性调节和具有记忆功能等特点,同时还可以通过计算机实现自动调光。     

基于超材料的吸波体设计及其波导缝隙天线应用

设计了一种基于超材料电磁特性的吸波体, 并将其应用于波导缝隙天线. 该吸波体是由两层金属及其中间的有耗介质组成, 上层金属是由刻蚀交叉缝隙的贴片形成的电谐振器, 下层金属不刻蚀, 作为整个金属地板. 通过优化结构参数, 得到了一种极化不敏感、宽入射角的超薄吸波体, 吸波率达到99.1%, 厚度只有约0.01λ. 将该吸波体应用与波导缝隙天线, 在5.48-5.7 GHz工作频段内, 天线雷达散射截面减缩都在3 dB以上, 在鼻锥方向的-25°-+25°范围的角度上, 天线雷达散射截面减缩均在5 dB以上, 雷达散射截面减缩最大超过12 dB, 而天线前向增益仅降低了0.53 dB. 实验结果与仿真结果符合得较好, 证实了该吸波体具有好的天线雷达散射截面减缩效果, 可以应用于天线目标的隐身.     

等效环路有限差分算法及其在人工复合材料设计中的应用

本文实现了一种新颖的等效环路有限差分算法, 这种算法借鉴传输线算法的思想, 在Yee氏网格中引入等效集总元件, 包括常规介质中的等效串联电感、并联电容和左手材料中的等效并联电感、串联电容等. 良好的物理思想使其可以提供适用色散介质计算的收敛性条件, 更加适合仿真计算频率选择表面和超材料等色散介质. 为了提高其计算效率, 研究了核内加速技术, 这种技术理论上可达到最高4倍的加速, 实际应用中得到2倍左右的加速效果. 使用该算法进行了超材料吸波体结构的设计, 通过单双环电阻加载实现宽带电磁波吸收功能. 隐身天线罩对于实现天线的带外隐身有着重要作用, 利用该算法设计了工作频率为1 GHz, 隐身频带在3 GHz到9 GHz的天线罩. 并与两个加工样品的测量结果进行了比较, 对比的结果验证了算法的正确性. 同时核内加速技术的有效性也通过仿真时间比较得到了验证. 关键词： 等效环路有限差分算法 核内加速 超材料吸波体 隐身天线罩     

A new chaotic system and its circuit realization

Based on the Lü system, a new chaotic system is constructed, which can generate a Lorenz-like attractor, Chen-like attractor, Lü-like attractor and new attractor when its parameters are chosen appropriately. The detailed dynamical behaviours of this system are also investigated, including equilibria and stability, bifurcations, and Lyapunov exponent spectrum. Moreover, a novel analogue circuit diagram is designed for the verification of various attractors.     

宽带超薄完美吸波体设计及在圆极化倾斜波束天线雷达散射截面缩减中的应用研究

为了缩减天线带内雷达散射截面(radar cross section, RCS), 在双频带完美吸波材料的基础上, 通过缩小两吸波率峰值之间的距离, 设计出了一种频带较宽的超薄完美吸波体.该吸波体由两层金属及其中间的有耗介质组成, 底面金属不刻蚀, 顶面由方形贴片和绕其四周的开口方环组成, 该结构具有低频点LC谐振和高频点偶极子谐振的特征.仿真和实验结果表明: 该吸波体具有极化不敏感和宽入射角的特征, 其在厚度小于0.01λ的条件下, 具有8.2%的半波功率相对带宽, 最大吸波率的峰值为91.6%和96.5%. 将吸波体用于圆极化的倾斜波束 (tilted beam, TB)天线, 仿真和测试结果表明: 该天线在保持增益不变的条件下, 不仅轴比得到改善, 有效带宽得到拓展, 且在5.5–6.5 GHz范围内TB天线的RCS缩减至少在3 dBsm以上, 在谐振频点处最大缩减幅度分别为11 dBsm和8 dBsm; 在两谐振点处鼻锥方向-36°–+36°范围内, TB天线的RCS缩减均有明显效果. 关键词： 超薄完美吸波体 TB天线 雷达散射截面 圆极化     

BIT/PLZT/BIT多层铁电薄膜结构设计及制备的实验研究

为了有效阻止锆钛酸铅镧(PLZT)与半导体界面发生反应和互扩散,根据锆钛酸铅镧和钛酸铋(B IT)各自的铁电性能,提出了一种新的设计思想———多层铁电薄膜.采用脉冲准分子激光淀积(PLD)方法制备了B IT/PLZT/B IT多层铁电薄膜.采用Sawyer-Tower电路测量,其剩余极化强度Pr=34μC/cm2,矫顽场Ec=40 kV/cm.这种结构吸收了锆钛酸铅镧和钛酸铋的优点,提高了铁电薄膜的铁电性能.     

基于时间反演技术的电磁器件端口场与内部场转换方法

随着电磁器件的集成化,器件搭载的模块、实现的功能愈发多样.各模块间的耦合难以忽略,设计难度陡然增加,传统设计方法逐渐力不从心,迫切需要寻找一种新的电磁综合设计方法.本文利用时间反演电磁波的时空同步聚焦特性,探索了将时间反演技术应用于器件设计的可能性.首先,基于通用的器件逆设计流程,利用时间反演技术、并矢格林函数及电磁学...     

一种多层白色磷光有机电致发光器件的制备及性能研究

制备了一种结构为ITO/NPB/NPB:Ir(piq)₂(acac)/CBP:TBPe/BAlq:rubrene/BAlq/Alq₃/Mg:Ag的白色磷光有机电致发光器件.其中空穴传输型主体NPB掺杂磷光染料Ir(piq)₂(acac)作为红色发光层,双载流子传输型主体4,4′-N,N′-dicarbazole-biphenyl (CBP)掺杂TBPe作为蓝色发光层,电子传输型主体材料BAlq掺杂rubrene作为绿色发光层.以上发光层夹于 关键词： 电致发光 磷光染料 异质结 白光     

超宽禁带半导体β-Ga_2O_3及深紫外透明电极、日盲探测器的研究进展

β-Ga_2O_3是一种新型的超宽禁带氧化物半导体,禁带宽度约为4.9 eV,对应日盲区,对波长大于253 nm的深紫外一可见光具有高的透过率,是天然的日盲紫外探测及深紫外透明电极材料.本文介绍了Ga_20_3材料的晶体结构、基本物性与器件应用,并综述了β-Ga_2O_3在深紫外透明导电电极和日盲紫外探测器中的最新研究进展.Sn掺杂的Ga_2O_3薄膜电导率可达到32.3 S/cm,透过率大于88%,但离商业化的透明导电电极还存在较大差距.在日盲紫外探测器应用方面,基于异质结结构的器件展现出更高的光响应度和更快的响应速度,ZnO/Ga_2O_3核/壳微米线的探测器综合性能最佳,在-6 V偏压下其对254 nm深紫外光的光响应度达1.3×10~3A/W,响应时间为20μs.     

Ordered conducting polymer multilayer films and its application for hole injection layers in organic light-emitting devices

We reported a controlled architecture growth of layer-ordered multilayer film of poly(3,4-ethylene dioxythiophene) (PEDOT) via a modified Langmuir-Blodgett (LB) method. An in situ polymerization of 3,4-ethylene dioxythiophene (EDOT) monomer in multilayer LB film occurred for the formation of ordered conducting polymer embedded multilayer film. The well-distribution of conducting polymer particles was characterized by secondary-ion mass spectrometry (SIMS). The conducting film consisting of ordered PEDOT ultrathin layers was investigated as a hole injection layer for organic light-emitting diodes (OLEDs). The results showed that, compared to conventional spin-coating PEDOT film and electrostatic self-assembly (ESA) film, the improved performance of OLEDs was obtained after using ordered PEDOT LB film as hole injection layer. It also indicated that well-ordered structure of hole injection layer was attributed to the improvement of OLED performance, leading to the increase of charged carrier mobility in hole injection layer and the recombination rate of electrons and holes in the electroluminescent layer.     

基于数字微镜器件的自适应高动态范围成像方法及应用

在结构光三维扫描测量中,强反射表面因编码结构光照射后易产生局部镜面反射的特性,引起相机曝光饱和,淹没了所要检测的表面几何特征信息.为解决强反射表面的视觉成像难题,基于数字微镜器件(digital micromirror device,DMD)具有调制入射光线空间信息的特性,本文提出一种基于DMD的自适应高动态范围成像方法.设计与搭建了一套新型可编程的计算成像系统,建立其光学系统模型,并实现了DMD微镜与CMOS像素的匹配与映射;分析了基于逐像素编码曝光的高动态范围成像原理,并设计了基于DMD的光强编码控制算法,实现对入射光线强度的自适应精确调制,从而使进入成像系统中的入射光强始终处于相机的合适曝光强度内.实验表明:该方法突破了普通数字相机的动态范围限制,能够精确地控制被测强反射表面各个区域的入射光线强弱,并实现了对强反射表面的局部过曝光区域的清晰成像.该研究成果将为从根源上解决强反射表面因局部过曝光造成的三维点云缺失问题提供重要的解决方案.     

Experimental Design and Methodology for Estimation of Local Heat Transfer Coefficient in Jet Impingement Using Transient Inverse Heat Conduction Problem

Abstract

This article aims to employ a two-dimensional inverse heat conduction technique in designing an experiment for accurately estimating the local convective heat transfer coefficient in slot jet impingement, given temperature measurements at some interior locations in the target plate. The method uses a sequential procedure together with the Beck function specification approach. Solution accuracy and experimental errors are examined using simulated temperature data. It is concluded that a good estimation of the space variable heat transfer coefficient can be made from the knowledge of the transient temperature recordings. The technique is used in a series of numerical experiments to provide the optimum experimental design for a slot jet impingement heat transfer investigation.     

A new Rosslor hyperchaotic system and its realization with systematic circuit parameter design

Based on two modified Rosslor hyperchaotic systems, which are derived from the chaotic Rosslor system by introducing a state feedback controller, this paper proposes a new switched Rosslor hyperchaotic system. The switched system contains two different hyperchaotic systems and can change its behaviour continuously from one to another via a switching function. On the other hand, it presents a systematic method for designing the circuit of realizing the proposed hyperchaotic system. In this design, circuit state equations are written in normalized dimensionless form by rescaling the time variable. Furthermore, an analogous circuit is designed by using the proposed method and built for verifying the new hyperchaos and the design method. Experimental results show a good agreement between numerical simulations and experimental results.     

导热几何形状反演的变分原理及边界条件的确立

本文采用变域变分原理,建立了导热几何形状反演问题的变分原理,同时获得了该问题所需满足的边界条件和附加条件.该变分原理能将未知形状的几何变量及控制方程结合在一个变分泛函中,使得数学描述简洁、紧凑,且几何变量及控制方程的求解能耦合地进行.介绍了运用该变分原理并结合有限元方法进行数值计算的方法. 关键词： 几何形状反演 变分原理 有限元 导热