Controllable preparation of vertically standing graphene sheets and their wettability and supercapacitive properties

Vertically standing graphene(VSG) sheets have been fabricated by using plasma enhanced chemical vapor deposition(PECVD) method.The lateral size of VSG nanosheets could be well controlled by varying the substrate temperature.The higher temperature usually gives rise to a smaller sheet size.The wettability of VSG films was tuned between hydrophobicity and hydrophilicity by means of oxygen and hydrogen plasma treatment.The supercapacitor electrode made of VSG sheets exhibited an ideal double-layer-capacitor feature and the specific capacitance reached a value up to 9.62 F·m~(-2).     

The apparent state of droplets on a rough surface

The factors influencing the state and wetting transition of droplets on a rough surface are both complex and obscure. The change in wetting is directly reflected by changes under the contact condition of the droplets with the surface. The recent study about the wettability of the superhydrophobic surface under the condensing condition arouses the new understanding about the apparent state of droplets on a rough surface. In this work, to validate the existence of droplets in an intermediate state, a microscale pillar topological polydimethylsiloxane (PDMS) surface was manufactured and its wettability under various conditions was studied. According to the experimental data, it is proposed that the wetting state of a rough surface may be embodied using the contact area ratio of a solid/liquid/gas droplet with the projective plane. A general calculation model for the apparent contact angle of droplets is given and expressed diagrammatically. It is found that the measured apparent contact angles of droplets at different states on the surface falls within the range predicted by our proposed equation. Supported by the National Natural Science Foundation of China (Grant No. 50606025)     

石墨烯表面的特征水分子排布及其湿润透明特性的分子动力学模拟

石墨烯因其独特的分子构型、卓越的物理化学性能而受到广泛关注.本文首先利用分子动力学模拟比较了单层石墨烯、铜、二氧化硅三者表面的浸润性,除了接触角的比较,还分析了基底表面的水分子排布,得到石墨烯表面的特征水分子排布为:表面有两层密集的水分子层,其中靠近基底的密集水分子层中O—H键与垂直基底方向夹角集中在90°附近,并且基底表面的氢键几乎都垂直于基底.另一方面,本文研究了石墨烯浸润透明特性,发现在铜和二氧化硅上添加一层石墨烯,对铜的浸润性影响较小,对二氧化硅的浸润性影响很大,不仅使其上接触角显著增大,还使得基底表面的水分子排布呈现出类似单层石墨烯上的规律.本文使用分子动力学模拟方法从微观尺度验证了文献的实验结果,从基底表面水分子排布角度分析了石墨烯独特的浸润透明特性,为进一步开发石墨烯在微结构设计上的应用提供了理论指导.     

Dynamic wettability of wood surface modified by acidic dyestuff and fixing agent

Acidic dyestuffs can bring brilliant colors to the wood and fixing agents can avoid the color loss. They could change the surface wettability of wood, which impact the gluing process of veneers. In condition of the higher moisture content of wood, the rare veneers, the veneers dyed by acidic dyestuffs and the dyed veneers fixed by Chitosan were glued respectively by one-component wet-curing isocyanate adhesive and the contact angles (θ) of the different gluing interfaces were measured. The dynamic wettability of these gluing interfaces was characterized by both the contact angle θ and the spreading-penetration parameter (K) calculated by θ. The results showed that the θ-values decreased significantly with the extension of time and the initial contact angles (θ_i) decreased with the moisture contents of veneers increasing, but the variation of the balance contact angles (θ_e) was reversed with θ_i. When the moisture contents of veneers were same, the variation of θ of the rare veneers was minimal and the variation of θ of the fixed veneers was maximal. The K-values of these gluing interfaces all decreased significantly with the moisture contents of veneers increasing, but the variations of K were different. The wetting model describing the dynamic wetting process was established on the basis of these variations.     

Silver nanoparticles decorated on a three-dimensional graphene scaffold for electrochemical applications

Silver metal nanoparticles were decorated by electron beam evaporation on graphene foam (GF) grown by chemical vapour deposition. X-ray diffraction, Raman spectroscopy, scanning and transmission electron microscopy, and atomic force microscopy were used to investigate the structure and morphology of the graphene foam/silver nanoparticles (GF/Ag). Both samples were tested as electrodes for supercapacitors. The GF/Ag exhibited a significantly higher capacitive performance, including a specific capacitance value of (~110 Fg⁻¹) and excellent cyclability in a three-electrode electrochemical cell. These results demonstrate that graphene foam could be an excellent platform for metal particles for investigating improved electrochemical performance.     

Simulation solution for micro droplet impingementon a flat dry surface

This paper presents a computational fluid dynamics approach for micro droplet impacting on a flat dry surface. A two-phase flow approach is employed using FLUENT VOF multiphase model to calculate the flow distributions upon impact. The contact line velocity is tracked to calculate the dynamic contact angle through user defined function program. The study showed that the treatment of contact line velocity is crucial for the accurate prediction of droplet impacting on poor wettability surfaces. On the other hand, it has much less influence on the simulation of droplet impacting on good wettability surfaces. Good fit between simulation results and experimental data is obtained using this model.     

梳状波导结构中石墨烯表面等离子体的传播性质

理论上研究了介质/石墨烯/介质梳状波导结构中表面等离子体的传播性质. 波导中表面等离子体模的有效折射率随着石墨烯费米能级的提高而减小, 随着介质折射率的增加而增加. 分析和仿真结果表明, 基于这种梳状波导可以在中红外波段实现新型的纳米等离子体滤波器, 器件的尺度在几百纳米的范围. 通过改变梳状分支的长度, 石墨烯的费米能级, 介质的折射率和波导中石墨烯的层数, 很容易来调节带隙的位置. 另外, 滤波带隙的宽度随着梳状分支数的增加而增加. 这种滤波性质将在可调的高集成光子滤波器件中具有潜在的应用.     

Bioinspired few‐layer graphene prepared by chemical vapor deposition on femtosecond laser‐structured Cu foil

Inspired from butterfly wings that exhibit unique dewetting properties and brilliant structural color synchronously, we reported here the preparation of biomimetic few‐layer graphene films through a template‐directed chemical vapor deposition method using laser‐structured Cu foil as substrates. Hierarchical micronanostructures, including microscale stripes derived from the laser scanning and nanoscale laser‐induced periodic surface structures (LIPSS), formed on Cu foil after a simple femtosecond laser treatment. By tuning the laser power, the surface roughness of the resultant Cu foils can be well controlled. Using the laser structures Cu foil as templates, biomimetic few‐layer graphene films with both iridescence and superhydrophobicity have been successfully prepared. The present work may open up a new way to design and prepare structured graphene film in a biomimetic manner, and we deem that the bioinspired few‐layer graphene films may find broad applications in the near future.

     

Electrochemical control of surface wettability of poly(3-alkylthiophenes)

The effect of n-alkyl side-chain length on water contact angle with films in neutral and electrochemically doped states are studied. Increasing the side-chain from butyl to hexyl to octyl increases the contact angle of water on conjugated polymer films in both electrochemical states, but decreases the difference in angle between the states in the same film. Devices based on these films have potential application in, for example, guiding water and other liquids through microfluidic channels in lab-on-a-chip and micro-electro-mechanical (MEM) applications.     

基于导模共振效应提高石墨烯表面等离子体的局域特性

本文构建了一种包含石墨烯和亚波长光栅的复合结构, 借助衍射光栅的导模共振效应, 在石墨烯表面激发高局域性表面等离子体激元, 研究了石墨烯与光栅结构对表面等离子体激元局域特性的影响规律, 并借助基于有限元法的COMSOL软件, 分析了缓冲层厚度、光栅周期、载流子迁移率和费米能级对石墨烯的表面电场、品质因子Q和有效模式面积S_eff的影响. 结果表明, 石墨烯表面等离子体激元的局域性在特定的参数点获得显著提高: 当μ = 0.7 m²/(V·s)时, 品质因子达到最大值Q_max = 1793; 当p = 235 nm或E_F = 0.72 eV时, 表面电场达到了入射光的3000倍以上. 强烈的局域性导致强烈 的光-物质相互作用, 因而本文提出的复合结构可实现高灵敏度传感器和高效率的非线性光学设备, 极大地扩展了石墨烯在纳米光学领域中的应用.     

X射线CT技术体积重构法表征异形泡沫金密度

采用X射线CT(XCT)技术进行体积重构的研究方法,解决了异形泡沫金密度表征中体积难以精确测量的问题,密度表征结果为978.68 mg/cm3。同时,为了研究该方法的有效性与不确定度,开展了XCT体积重构法与排水法对具有不规则外形橡皮泥样品的密度表征对比实验,结果表明两者之间的相对误差小于1%。     

表面预处理对石墨烯上范德瓦耳斯外延生长GaN材料的影响

基于范德瓦耳斯外延生长的氮化镓/石墨烯材料异质生长界面仅靠较弱的范德瓦耳斯力束缚,具有低位错、易剥离等优势,近年来引起了人们的广泛关注.采用NH_3/H_2混合气体对石墨烯表面进行预处理,研究了不同NH_3/H_2比对石墨烯表面形貌、拉曼散射的影响,探讨了石墨烯在NH_3和H_2混合气氛下的表面预处理机制,最后在石墨烯上外延生长了1.6μm厚的GaN薄膜材料.实验结果表明:石墨烯中褶皱处的C原子更容易与气体发生刻蚀反应,刻蚀方向沿着褶皱进行;适当NH_3/H_2比的混合气体对石墨烯进行表面预处理可有效改善石墨烯上GaN材料的晶体质量.本研究提供了一种可有效提高GaN晶体质量的石墨烯表面预处理方法,可为进一步研究二维材料上高质量的GaN外延生长提供参考.     

高质量大面积石墨烯的化学气相沉积制备方法研究

石墨烯因其奇特的能带结构和优异的物理性能而成为近年来大家研究的热点, 但是目前单层石墨烯的质量与尺寸制约了其实际应用的发展. 本文采用常压化学气相沉积(CVD)方法, 基于铜箔衬底, 利用甲烷作为碳源制备了高质量大面积的单层与多层石墨烯. 研究发现: 高温度、稀薄的甲烷浓度、较短的生长时间以及合适的气体流速是制备高质量、大面积石墨烯的关键. Raman光谱, 扫描电子显微镜、透射电子显微镜等表征结果表明: 制备的石墨烯主要为单层, 仅铜箔晶界处有少量多层石墨烯. 电学测试表明CVD制备的石墨烯在低温时呈现出较明显的类半导体特性; 薄膜电阻随外界磁场的增大而减小.     

Coupling interaction between a single emitter and the propagating surface plasmon polaritons in a graphene microribbon waveguide

The coupling interaction between an individual optical emitter and the propagating surface plasmon polaritons in a graphene microribbon （GMR） waveguide is investigated by numerical calculations, where the emitter is situated above the GMR or in the same plane of the GMR, The results reveal a multimode coupling mechanism for the strong interaction between the emitter and the propagating plasmonic waves in graphene. When the emitter is situated in the same plane of the GMR, the decay rate from the emitter to the surface plasmon polaritons increases more than 10 times compared with that in the case with the emitter above the GMR.     

Evaluation of the surface properties of PTFE foam coating filter media using XPS and contact angle measurements

A newly developed PTFE foam coating filter was developed which can be used for hot gas cleaning at temperatures up to 250 °C. The emulsion-type PTFE was coated onto a woven glass fiber using a foam coating method. The filter surface was closely examined using X-ray photoelectron spectroscopy (XPS) and contact angle measurements. The XPS results were used to determine the binding force between the carbon and fluorine of PTFE, which imparts coating stability to the filter medium. More than 95% of the bonds of the PTFE foam coating filter were between carbon and fluorine, and this filter demonstrated excellent hydrophobic and good oleophobic properties at the same time. The contact angles of liquid droplets on the filter surface were used to predict the potential wetability of the filter against water or oil. In addition, the very low surface free energy of the filter medium, which was evaluated using the Owens-Wendt method, demonstrates a very stable surface and a high de-dusting quality.     

The effect of low-pressure air plasma treatment on the wettability and surface energy of polyvinyl chloride films

Low-pressure plasma in a RF discharge of air is employed to introduce a polar function to a polyvinyl chloride surface to enhance the wettability and activation. A clear increase in the surface energy of the surface of a polymer due to air plasma treatment was observed. The surfaces become highly hydrophilic after treatment. The effect of plasma treatment on the morphology and wettability of the surfaces were characterized by using a static contact angle measurement and attenuated total reflection-FTIR spectroscopy.     

石墨烯与金属的欧姆接触理论研究

石墨烯材料应用于多种电子器件时不可避免地要与金属电极接触,它们之间的接触电阻直接影响了器件的性能.为了揭示影响金属电极与石墨烯间接触电阻的因素,提出有效地抑制这些影响的措施,本文建立了一种求解接触电阻的物理模型,将载流子的输运分为金属与正下方石墨烯之间、正下方石墨烯与邻近石墨烯之间的两个过程,分别研究各个过程的输运概率;结合金属电极与石墨烯接触对载流子分布的影响分析接触电阻,据此分别探讨了金属电极材料、栅极电压、掺杂浓度、金属与石墨烯原子距离等对接触电阻的影响.为验证理论分析结果的正确性,制作了金与石墨烯接触的实验样品,实验测得的接触电阻与理论分析结果符合.理论分析结果表明,可通过选择与石墨烯功函数接近的金属材料,降低二氧化硅层厚度,增加载流子平均自由程,改进金属材料的表面形态使其更光滑,减小金属与石墨烯耦合长度等方法降低石墨烯与金属电极的接触电阻.     

粗糙表面形貌对湿润性的影响

采用自仿射分形对粗糙表面形貌进行了定量描述。基于分形粗糙表面形貌,建立了粗糙表面润湿性的理论模型并进行了数值计算,分析讨论了均方根粗糙度和表面分形维数对接触角的影响。研究结果表明,均方根粗糙度对接触角的影响较大,而粗糙表面的分形维数对润湿性的影响则并不明显。     

石墨烯在Ni(111)表面生长机理的紧束缚计算研究

本文采用SCC-DFTB方法,研究了石墨烯在Ni金属(111)表面上的生长机理及在台阶面生长情况.结果分析表明,苯环在Ni表面吸附时以界面fcc构型总能最低,结构最为稳定.边缘生长时,附着在衬底表面上的石墨烯层中C原子活性从边缘向中间逐渐降低.在由(111)晶面和(1-11)晶面相交形成的台阶面上,石墨烯片层可连续生长,同时相对衬底表面发生一定偏转,在较大面积时将出现缺陷.改善石墨烯与衬底台阶处的界面不匹配情况将有利于其大面积高质量生长.     

Diffraction properties of binary graphene sheet arrays

We theoretically and numerically investigate the diffraction properties of surface plasmon polariton(SPP) in binary graphene sheet arrays. The single SPP band splits into two minibands by alternatively arranging the graphene waveguides with two different chemical potentials. Numerical simulations show that SPP beams in the array split into two different paths due to the different diffraction relation.