Liquid chromatography on unmodified and modified Spheron gels II. Barbiturates and sulfonamides

Summary The ethylene glycol methacrylate gel Spheron and ion-exchangers produced by the chemical modification of this gel (the cation exchanger Spheron S and the anion exchanger Spheron DEAE) can be used for reversedphase chromatography of barbiturates and sulfonamides. In addition to the hydrophobic effect, the unique selectivities of the functional groups of Spheron materials can be utilized for the chromatographic separation of these compounds, including those difficult to resolve on octadecyl silica.Principle author     

Liquid chromatography on unmodified and modified spheron gels I. Nucleosides,bases and related compounds

Summary The ethylene glycol methacrylate gel Spheron and ion exchangers produced by the chemical modification of this gel (such as the cation exchanger Spheron S and anion exchanger Spheron DEAE) are compared with octadecylsilica as column packing materials for reversedphase chromatography of nucleic acid constituents and related compounds. The different separation selectivities of the individual materials can be utilized for the chromatographic separation of these compounds.     

Is Multidimensional High Performance Liquid Chromatography (HPLC) an Alternative in Protein Analysis to 2D Gel Electrophoresis?

The interactive modes of High Performance Liquid Chromatography (HPLC) of proteins provide a platform for the construction of a multidimensional HPLC system coupled to mass spectrometry. We present a system composed of both anion and cation exchanger columns, in the first dimension, and n‐octadecyl bonded 1.5 μm nonporous silica columns in the second dimension. Both columns are operated under gradient conditions. A system suitability test with standard proteins showed that the total analysis can be performed within about 20 minutes. The fractions taken from the ion exchanger column are directly analyzed within one minute on the reversed phase column at a high flow rate. Two reversed phase columns are applied and operated alternatively: while the first column performs the separation within one minute, the analytes leaving the first dimension are enriched in an on‐column focusing mode on top of the second column. The sample clean‐up and enrichment is performed on a novel type of restricted access cation exchanger column with internal sulfonic acid groups and external diol groups. The columns exhibit a molecular weight exclusion limit for globular proteins of about 15 kDa. Our next studies will be directed towards the analysis of proteins and peptides from extracts of fibroblasts.     

Optimal conditions for the reversed-phase chromatography of proteins

Summary Optimum stationary phases for reversed phase chromatography should be based on a silica with a large average pore diameter, preferably above 30nm. To exclude anormalous elution behaviour of proteins, octadecyl groups should be bonded to the surface and the residual silanol groups should be reacted with a highly active silanization agent like bistrimethylsilyl acetamide. The total amount of bonded carbon should not exceed 5% w/w. Because of the low diffusion coefficients of proteins, the particle diameter should be as small as possible. Protein retention can hardly be influenced by changes of the organic modifier or by temperature. Because of solubility and viscosity, however, acetonitrile is to be prefered. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

Evaluation of porous graphitic carbon as stationary phase for the analysis of fatty acid methyl esters by liquid chromatography

Summary Polyunsaturated fatty acids have been analysed as methyl esters by liquid chromatography on porous graphitic carbon and the results compared with those obtained on octadecyl bonded phases. Chromatographic behaviour on octadecyl bonded phases arises principally as a result of hydrophobic interactions with the bonded phase. Because the retention of analytes is greater on porous graphitic carbon than on octadecyl phases, organic mobile phases are required. When the number of double bonds is low (ca 1–3), the behaviour of porous graphitic carbon is similar to that of octadecyl bonded phases, but when this number increases stronger interactions with the flat surface of the graphite appear, resulting in new selectivity. These two ‘reversed-phase’ systems are considered complementary for separation of different fatty acid methyl esters. An additional advantage of porous graphitic carbon is that it enables isolation of hexadecartrienoic and hexadecadienoic acids, which are not available commercially.     

Influence of silica gel pretreatment and bonding technique on PAH selectivity of octadecyl bonded phases

Summary The effect of silica gel pretreatment and of different bonding techniques, on the chromatographic properties of octadecyl bonded phases is described. The experiments show that a monomeric octadecyl bonded phase, prepared from silica gel that has not been treated before bonding, has a poor selectivity towards polycyclic aromatic hydrocarbons (PAHs) and shows high adsorption of basic components. Silica gel treatment before the bonding of the monofunctional silane does not give a substantial improvement. Polymeric phases on the other hand show a much better PAH selectivity and a lower adsorptivity towards basic components. Further improvement can be achieved with the polymeric modification if silica gel treatment is carried out before bonding.     

Structures and chromatographic characteristics of capsule-type silica gels coated with hydrophobic polymers in reversed-phase liquid chromatography

Summary Silicone polymer-coated silica gels modified with octadecyl and octyl groups (S/S-C₁₈, S/S-C₈), or “capsule-type silica gels” were developed as packing materials for reversed-phase liquid chromatography. They were obtained by coating the surface of totally porous silica gel with a homogeneous silicone polymer film, and thereafter modifying the coating polymer with octadecyl or octyl groups. Retaining the advantages of silica-based packings, they show strong resistance of alkali-like organic porous polymeric materials.     

Epoxide‐derived mixed‐mode chromatographic stationary phases for separation of active substances in fixed‐dose combination drugs

A method for the preparation of novel mixed‐mode reversed‐phase/strong cation exchange stationary phase for the separation of fixed‐dose combination drugs has been developed. An epoxysilane bonded silica prepared by vapor phase deposition was used as a starting material to produce diol, octadecyl, sulfonate, and mixed octadecyl/sulfonate groups bonded silica phases. The chemical structure and surface coverage of the functional groups on these synthesized phases were confirmed by fourier‐transform infrared and solid‐state ¹³C NMR spectroscopy and elemental analysis. Alkylbenzene homologs, basic drugs, nucleobases and alkylaniline homologs were used as probes to demonstrate the reversed‐phase, ion exchange, hydrophilic interaction and mixed‐mode retention behaviors of these stationary phases. The octadecyl/sulfonate bonded silica exhibits pronounced mixed‐mode retention behavior and superior retentivity and selectivity for alkylaniline homologs. The mixed‐mode retention is affected by either ionic or solvent strength in the mobile phase, permiting optimization of a separation by fine tuning these parameters. The mixed‐mode stationary phase was applied to separate two fixed‐dose combination drugs: compound reserpine tablets and compound methoxyphenamine capsules. The results show that simultaneous separation of multiple substances in the compound dosage can be achieved on the mixed‐mode phase, which makes multi‐cycles of analysis for multiple components obsolete.     

The Retention of Some Organic Acids in Ion-Pair HPLC Systems

Abstract

The retention behaviour of some organic acids (N-phenylamides of benzoylacetic acid, phenolic acids and analgesic drugs) as model substances was investigated in reversed phase systems consisting of octadecyl silica (ODS) as a column packing material eluted with the buffer-methanol mixtures containing low concentrations of cetyltrimethylammonium bromide (cetrimide), tetrabutylammonium chloride (TBA-C1), tetraethylammonium chloride (TEA-C1) and di(2-ethylhexyl) orthophosphoric acid (HDEHP). The chain length of the n-alkyl group of the ion-pair reagent and the content of a modifir in the eluent contribute to rtention. Correlation between log k and log P and biological activity of N-phenylamides was analysed.     

Separation of 9,10-anthraquinone derivatives: evaluation of functionalised stationary phases in reversed phase mode

A series of reversed phases bonded with several functional groups was investigated for separation of anthraquinone derivatives, following the previous work, dedicated to the selectivity of octadecyl silica bonded phases. Considering wide diversity of substitutions in hydrophobic anthraquinone skeleton, interactions like dipole-dipole, π-π or H-bond acceptor/donor, as well as inclusion complexes formation can be employed to improve separation. In this study, several phases with grafts like cyano, nitro, aromatic, PEG, diol, calixarene and cyclodextrin were used with water-acetonitrile gradient for separation of thirty anthraquinoids' standards. The evaluation of performances was measured using the symmetry parameter and the number of critical pairs of peaks formed. The results point out the aromatic and calixarene bonded silica as the most interesting in terms of symmetry and critical pairs number. Finally we tested the performance of Caltrex Resorcinaren, Pursuit XRs DP and Luna Phenyl-Hexyl on real samples of anthraquinone natural dye extracted from a red thread taken from a 15th C. tapestry. We observed and compared the retention behaviour of some new anthraquinoids additional to our standards set and showing behaviour particular to substituted anthraquinone carboxylic acids.     

Surface modification of porous graphite for ion exchange chromatography

Summary Three distinct types of weak anion exchanger have been prepared by adsorption of polyethyleneimine (PEI) on to porous graphite (PGC): PGC coated dynamically with PEI, PGC coated with. an insoluble monolayer of PEI, and PGC coated with a cross-linked polymeric PEI. Using model solutes iodate, bromide, nitrate and nitrite, dissolved in aqueous buffers, the modified PGC's show typical ion exchange behaviour, and give chromatographic performance similar to that of bonded ion-exchange silica gels. Retention is reduced by increasing the ionic strength of the buffer, and by increasing the pH. A mechanism to explain the observed trends is presented.     

Study of triacontyl-functionalized monolithic silica capillary column for reversed-phase capillary liquid chromatography

A novel stationary phase triacontyl-functionalized monolithic silica capillary column was successfully prepared for reversed-phase capillary liquid chromatography. The performance of the monolithic silica capillary column coated with triacontyl chain for the separation of alkylbenzenes, xylene isomers, polycyclic aromatic hydrocarbons, and mixture of α- and β-carotenes was studied, which was compared to that using the monolithic silica capillary column coated with octadecyl chain. The comparison results showed that triacontyl-functionalized monolithic silica capillary column would be a promising media to be used for the separation of isomeric solutes with long chain in reversed-phase capillary liquid chromatography.     

A critical review of some liquid chromatography systems for the separation of sugars

Summary This contribution to the problems of carbohydrate (sugar) column liquid chromatography, evaluates several currently used systems (reversed phase octadecylated silica gel, amino modified silica gel, cation exchangers on polystyrene and on silica gel basis, polyol derivatised silica gel and anion exchange systems). The elution pattern, analysis time, column efficiency and column life time expectancy are considered to be the important points for this comparison. The application of silica gel-based cation exchanger and of polyol derivatised silica gel is new to this field. The comparison and/or evaluation tries to be critical and to come to a conclusion for the choice of a recommended system.     

Evaluation of microstructural features of a new polymeric organic stationary phase grafted on silica surface: A paradigm of characterization of HPLC-stationary phases by a combination of suspension-state H NMR and solid-state C-CP/MAS-NMR

Silica-supported poly(octadecylacrylate) (Sil-ODA_n), polymeric octadecylsilyl silica (polymeric ODS), and monomeric octadecylsilyl silica (monomeric ODS) were studied by a combination of suspension-state ¹H NMR and solid-state ¹³C CP/MAS-NMR to probe the mechanisms underlying their functions as stationary phases for RP-HPLC. Sil-ODA_n, with a strong temperature dependent separation behaviour showed correspondent temperature dependent manifestations in both suspension-state ¹H NMR and solid-state ¹³C CP/MAS-NMR experiments. With a gradual increase in temperature, intensity of proton signals (¹H NMR) of octadecyl moieties (mainly methylene groups) rose dramatically. This dramatic rise was at the same temperature of an endothermic peak detectable in its DSC thermogram indicating a relatively complete solid to liquid phase transition. In addition temperature dependencies of the ratio of trans to gauche conformed well to temperature dependencies of the separation factor between naphthacene and triphenylene (as a simple indicator of shape selectivity). Therefore NMR spectra of Sil-ODA_n were used as a reference for ascertaining percentage of octadecyl moieties of liquid type mobility in the two other stationary phases. Using this method we determined percentage of liquid phase in polymeric ODS and monomeric ODS at various temperatures. We suggest a combination of suspension-state ¹H NMR and solid-state ¹³C CP/MAS-NMR for structure-dynamic characterization of various kinds of hydrocarbon chains grafted onto the silica particles.     

Theoretical Aspects of Gradient Reversed-Phase High Performance Liquid Chromatography of Styrene – Butylacrylate Block Copolymers

Butylacrylate – styrene co-polymers prepared by atom transfer radical polymeratization were separated on an octadecyl silica column by gradient elution with tetrahydrofuran in water, up to the molar masses 10,000. In reversed-phase high performance liquid chromatography (RP-HPLC), the retention of macromolecules is affected very significantly even by change of a few tenths of per cent of the organic solvent in the aqueous-organic mobile phase. Therefore, gradient elution was used for the determination of the parameters of the equations describing the effects of the mobile phase on the retention behaviour of synthetic polymers. The retention parameters of homopolymers and copolymers were calculated from the gradient data using two retention models. The retention behaviour of the copolymers was described using the experimental gradient retention data for homopolymers.     

Determination of competitive adsorption isotherms applying the nonlinear frequency response method: Part II. Experimental demonstration

This paper demonstrates an experimental application of the nonlinear frequency response (FR) method extension to determine adsorption isotherms of binary mixtures. This method, based on the analysis of the response of a chromatographic column subjected to the sinusoidal inlet concentration changes, is shown to be an alternative for isotherm determination. The critical issue related to the successful application of the method is to reach experimentally the low frequency asymptotic behaviour of the corresponding frequency response functions (FRFs). Although, there are different possibilities to perform periodical inlet concentration changes, in this paper only simultaneous changes for both components were considered. The adsorption of phenol and 2-phenylethanol on octadecyl silica was analyzed experimentally using a mixture of methanol and water as a solvent. Parameters of competitive isotherms were also estimated for comparison using the classical perturbation method. Despite certain differences between competitive isotherms estimated with the two methods that were found, the obtained results show the potential of the nonlinear FR method for measuring competitive isotherms.     

Polybutadiene-coated zirconia packing materials in solvating gas chromatography using carbon dioxide as mobile phase

Summary In this paper, practical considerations of column efficiency, separation speed, thermal stability, and column polarity of capillary columns packed with polybutadiene-coated zirconia were investigated under solvating gas chromatography (SGC) conditions using carbon dioxide as mobile phase. When compared with results obtained from conventional porous octadecyl obtained from conventional porous octadecyl bonded silica (ODS) particles, PBD-zirconia particles produced greater change in mobile phase linear velocity with pressure than conventional ODS particles under the same conditions. The maximum plate number per second (N_t) obtained with a 30 cm PBD-zirconia column was approximately 1.5 times higher than that obtained with an ODS column at 100 °C. Therefore, the PBD-zirconia phase is more suitable for fast separations than conventional ODS particles in SGC. Maximum plate numbers per meter of 76,900 and 63,300 were obtained using a 57 cm×250 μm i.d. fused silica capillary column packed with 3 μm PBD-zirconia at 50 °C and 100 °C, respectively. The PBD-zirconia phase was stable at temperatures up to 320 °C under SGC conditions using carbon dioxide as mobile phase. Polarizable aromatic compounds and low molecular weight ketones and aldehydes were eluted with symmetrical peaks from a 10 cm column packed with 3 μm PBD-zirconia. Zirconia phases with greater inertness are required for the analysis of more polar compounds by SGC.     

Correlation of retention parameters of pesticides in normal- and reversed-phase systems and their utilization for the separation of a mixture of 14 triazines and urea herbicides by means of two-dimensional thin-layer chromatography

The selectivities of TLC systems were compared by use of correlations between RF(II) and RF(I) (by analogy with two-dimensional TLC). The greatest spread of points, indicative of individual selectivity, was obtained for nonaqueous mobile phases on silica and aqueous mobile phases on octadecyl silica adsorbent wettable with water (RP-18 W). The correlation of RF values in normal- and reversed-phase systems was utilized in the practical separation of a mixture of 14 triazines and urea herbicides using two-dimensional thin-layer chromatography on a Multi-K CS5 dual phase (3 cm strip of octadecyl silica parallel to silica layer). The plate was videoscanned showing the real picture of the plate.     

Polymer-Modified Silica Adsorbent with Reversed-Phase and Weak Cation-Exchange Groups

Micro-spherical silica gel has been modified with a polymer containing two different functional groups (C₁₈ and COOH) by use of a copolymer of octadecyl methacrylate and butyl acrylate and introduction of maleic anhydride. The chromatographic properties of these stationary phases in reversed-phase high-performance liquid chromatography (HPLC) have been studied over a broad pH range. Introduction of maleic anhydride as the third component of the polymer layer on the surface of micro-spherical silica leads to repartitioning of C₁₈ groups, which affects the hydrophobicity of the materials obtained. The presence of maleic anhydride secures the availability of carboxyl groups on the surface, and thus the acidic properties of the material.     

Fast separations with open tubular ion exchange capillary columns

Fused silica columns of 4.6 μm i.d. were coated with 3-sulfopropylsilane as a cation exchanger and 3-(2-aminoethyl-amino)-propylsilane as an anion exchanger. Fast separations of cations (< 25 seconds) and of anions (< 35 seconds) were obtained, using a potentiometric microelectrode as a detector. In proceeding towards smaller i.d.s, a mixture of alkali metal cations could be separated successfully in an uncoated fused silica capillary of 2.3 μm i.d. as a result of retention by the surface silanol groups at pH 9.4.