Fe2O3/ZnO/ZnFe2O4 composites for the efficient photocatalytic degradation of organic dyes under visible light

In this study, novel ternary Fe₂O₃/ZnO/ZnFe₂O₄ (ZFO) composites were successfully prepared through a simple hydrothermal reaction with subsequent thermal treatment. The as-prepared products were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET) analysis, Barrett-Joyner-Halenda (BJH) measurement, and UV–vis diffuse reflectance spectroscopy (UV–vis DRS). The photocatalytic degradation of rhodamine B (Rh B) under visible light irradiation indicated that the ZFO composites calcined at 500 °C has the best photocatalytic activity (the photocatalytic degradation efficiency can reach up to 95.7% within 60 min) and can maintain a stable photocatalytic degradation efficiency for at least three cycles. In addition, the photocatalytic activity of ZFO composites toward dye decomposition follows the order cationic Rh B > anionic methyl orange. Finally, using different scavengers, superoxide and hydroxyl radicals were identified as the primary active species during the degradation reaction of Rh B.     

Enhanced photocatalytic performance of CuAl2O4 nanoparticles spinel for dye degradation under visible light

Research on Chemical Intermediates - Environmental problems on a global scale have become more prominent with the population growth. For the removal of organic contaminants, the solar energy and...     

Enhanced visible light photocatalytic activity in N-doped edge- and corner-truncated octahedral Cu2O

Edge- and corner-truncated octahedral Cu₂O is successfully synthesized using an aqueous mixture of CuCl₂, sodium dodecyl sulfate, NaOH, and NH₂OH₃·HCl. Cu₂O_1-xN_x(150 °C, 30 min) samples are synthesized by nitridation of Cu₂O using an ammonothermal process. Cu retains a formal valence state through and beyond the nitridation process. N concentration in this sample is 1.73 at%, out of which 1.08 at% is substitutional in nature. Photocatalytic activity of Cu₂O_1-xN_x(150 °C, 30 min) sample is investigated and compared to that of pristine edge- and corner-truncated octahedral Cu₂O. Results show that Cu₂O_1-xN_x(150 °C, 30 min) sample with dominant {110} facets has a higher photocatalytic activity than the pristine Cu₂O material. Higher surface energy and a greater density of the “Cu” dangling bonds on {110} facets of edge- and corner-truncated octahedral Cu₂O_1-xN_x is the plausible reason for the observed optimum catalytic activity. Furthermore defect states induced by nitridation results in improved visible light adsorption. And also the band edge states changes which brought about by N doping. This is an interesting result since it bypasses the usual challenge faced by pristine Cu₂O which have band edge states between which transitions are normally forbidden. Selective radical quenching experiments suggest that photocatalytic activity of Cu₂O_1-xN_x is due to formation of hydroxyl radicals in water, subsequent to photogeneration of charge carriers in the photocatalyst.     

Enhanced photocatalytic degradation of rhodamine B under visible light irradiation on mesoporous anatase TiO2 microspheres by codoping with W and N

Mesoporous anatase TiO₂ microspheres were prepared via solvothermal method. Ammonium tungstate was used as the W source, and ammonia gas flowing in an ammonothermal reactor as the N source for codoping. TiO₂:(W,N) mesoporous microspheres, which were prepared from solvothermal treatment at 160 °C for 16 h and thermal ammonolysis at 500 °C for 2 h after calcination, have high specific surface area of 106 m² g⁻¹. XPS results indicate the presence of N_O, N_i and W⁶⁺ in the codoped mesoporous TiO₂ microspheres. Monodoping with N shifts the absorption band edge of anatase TiO₂ from ultraviolet region to visible region. Although codoping with W makes the visible light absorbance decrease a little, the photocatalytic degradation of a cationic dye rhodamine B (RhB) on mesoporous TiO₂:(W,N) microspheres is increased to 1.7 times of that on mesoporous TiO₂:N microspheres. This may due to decreasing recombination centers by W-doping charge compensation.     

Enhanced photocatalytic activity and stability of AgBr/BiOBr/graphene heterojunction for phenol degradation under visible light

In this work, we have reported synthesis of AgBr/BiOBr photocatalyst supported on graphene (Gr) using facile precipitation method. AgBr/BiOBr/Gr was characterized using various spectral techniques like FESEM, TEM, XRD, FTIR, XPS, Raman and PL analyses. AgBr/BiOBr/Gr had improved visible light absorption. PL studies indicated the reduction in recombination of photogenerated electron hole pair of AGBr/BiOBr/Gr. AFM analysis confirmed the thickness of AGBr/BiOBr/Gr was less than 8.0 nm. The higher dispersibility of photocatalyst was ascertained by Tyndall effect. AgBr/BiOBr/Gr photocatalyst was effectively used for the photodegradation of phenol from simulated water. The phenol degradation process was remarkably influenced by adsorption process. The concurrent adsorption and photocatalytic was effective for degradation of phenol. The phenol was completely mineralized into CO₂ and H₂O in 6 h. The degradation process followed pseudo first order kinetics. The results confirmed that integration of AgBr/BiOBr with graphene caused an increase in photocatalytic activity due to reduced recombination of photogenerated electron hole pair and electron sink behavior of graphene for photogenerated electrons of BiOBr. AgBr/BiOBr/Gr photocatalyst displayed significant stability and recyclability for ten catalytic cycles.     

Efficient photocatalytic degradation of phenol over Co3O4/BiVO4 composite under visible light irradiation

Co3O4/BiVO4 composite photocatalyst with a p-n heterojunction semiconductor structure has been synthesized by the impregnation method. The physical and photophysical properties of the composite photocatalyst have been characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transimission electron microscopy (TEM), BET surface area, and UV-visible diffuse reflectance spectra. Co is present as p-type Co3O4 and disperses on the surface of n-type BiVO4 to constitute a heterojunction composite. The photocatalyst exhibits enhanced photocatalytic activity for phenol degradation under visible light irradiation. The highest efficiency is observed when calcined at 300 degrees C with 0.8 wt % cobalt content. On the basis of the calculated energy band positions and PL spectra, the mechanism of enhanced photocatalytic activity has been discussed.     

AgIO3-modified AgI/TiO2 composites for photocatalytic degradation of p-chlorophenol under visible light irradiation

Semiconducting silver iodate (AgIO(3)) was used to modify the visible light response of an AgI/TiO(2) (AIT) catalyst by a facile method. The uncalcined AIT (AITun) and AIT calcined at 200°C (AIT200) consisted of AgIO(3), AgI, and TiO(2) semiconductors, while that calcined at 450 °C (AIT450) was composed of AgI and TiO(2). The activity in p-chlorophenol (PCP) degradation under visible light irradiation using either AITun or AIT200 was much higher than that with AIT450, which was mainly attributed to the fact that the presence of AgIO(3) provided a new matching band potential. AIT200 exhibited better photocatalytic properties than AITun due to its higher crystallinity after calcination. Moreover, the high catalytic activity of AIT200 was maintained after five successive cyclic experiments under visible irradiation. Considering the effect of radical scavengers and N(2) purging on the photocatalysis process, we deduced that the probable pathway of PCP degradation was mainly a surface charge process, caused by valence band holes.     

Preparation of mesoporous TiO2/CNT nanocomposites by synthesis of mesoporous titania via EISA and their photocatalytic degradation under visible light irradiation

Stabilized mesoporous TiO₂ was synthesized by evaporation induced self assembly (EISA) method and mechanically incorporated into single-walled carbon nanotubes (SWCNT) with different ratios. The physicochemical properties of the nanocomposites (mesoporous TiO₂/SWCNT) materials were investigated by Brunauer–Emmett–Teller (BET) measurement, X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray (EDX), photoluminescence (PL) and ultraviolet–visible (UV–Vis) spectroscopy measurements. The catalytic activity of mesoporous TiO₂ and nanocomposites were assessed by examining the degradation of rhodamine B as model aqueous solution under visible light. CNTs are facilitating the photocatalytic activity of mesoporous TiO₂ in the degradation of rhodamine B efficiently.     

Photocatalytic activity under visible light illumination of organic dyes over g-C3N4/MgAl2O4 nanocomposite

Using a grinding method, nanocomposites of graphitic carbon nitride (g-C₃N₄) and magnesium aluminate (MgAl₂O₄) spinel were successfully synthesized for the photocatalytic degradation of methylene blue (MB) and methyl orange (MO). Variously formulated g-C₃N₄/MgAl₂O₄ nanocomposites were characterized by thermal gravimetric analysis (TGA), X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy equipped with energy dispersive spectroscopy (SEM/EDS), transmission electron microscopy (TEM) and surface area and micropore analysis (BET surface area). The g-C₃N₄ powder exhibited a nanosheet structure whereas the MgAl₂O₄ spinel comprised agglomerated nanoparticles. The optical properties of the g-C₃N₄/MgAl₂O₄ nanocomposites were investigated by diffuse reflectance spectroscopy (DRS). As the g-C₃N₄ loading content increased from 0 to 30%, the optical band gap energy of the nanocomposite decreased from 3.84 to 2.86 eV, the specific surface area decreased from 153.78 to 114.45 m²/g, and the porosity decreased from 0.447 to 0.347 cm³/g. A 20%g-C₃N₄/MgAl₂O₄ nanocomposite proved to be the most effective photocatalyst and degraded MB faster and more completely than MO. The degradation rates of both MO (0.0107 min^?1) and MB (0.0386 min^?1) in a mixed MO-MB system were greater than the degradation rates in their single systems. The key factor that improved the photocatalytic degradation of MO was the synergistic effect whereas the synergistic effect and photosensitization were the key factors that enhanced the photocatalytic degradation of MB. The g-C₃N₄/MgAl₂O₄ nanocomposite is suitable for the photocatalytic degradation of mixed dyes because its point of zero charge is neutral and it is stable and recyclable.     

ZnO-Bi2O3/graphitic carbon nitride photocatalytic system with H2O2-assisted enhanced degradation of Indigo carmine under visible light

Indigo carmine in aqueous solution was effectively degraded using ZnO-Bi₂O₃/Graphitic Carbon Nitride heterojunction structure by visible light/H₂O₂ system. The mechanism of photocatalytic degradation of Indigo carmine shows the responsible species for the degradation of Indigo carmine in the ZnO-Bi₂O₃-xC₃N₄/H₂O₂/visible light system (x = 0, 1, 2, and 3) is the hydroxyl radicals which were generated from the reaction of e⁻ and h⁺ with H₂O₂. Under optimal conditions, ZnO-Bi₂O₃-2C₃N₄/H₂O₂/Vis system degraded more than 93% of Indigo carmine in 180 min. Besides, the kinetic of the photocatalytic process was detailed. These results demonstrate that the ZnO-Bi₂O₃-2C₃N₄/H₂O₂/visible light system may become a promising approach to achieve efficient environmental remediation as an environmentally friendly oxidant.     

Fabrication of nanoporous polymeric crystalline TiO2 composite for photocatalytic degradation of aqueous organic pollutants under visible light irradiation

A nanoporous polymeric crystalline TiO₂ composite (TiO₂/PDVB‐MA) has been successfully synthesized through an in situ synthesis method using divinylbenzene (DVB), methacrylic acid (MA) and tetrabutyl titanate. The experimental results showed that TiO₂ nanoparticles composed of the mixture phases of anatase and rutile were homogeneously dispersed into the PDVB‐MA support. The TiO₂/PDVB‐MA composite was used as photocatalyst for Rhodamine B (RhB), bisphenol A and 2,4,6‐trichlorophenol degradation under visible light irradiation. More interestingly, the excellent photocatalytic performance of the composite was observed with regard to RhB and bisphenol A, which might be ascribed to the synergistic effect between TiO₂ nanoparticles and PDVB‐MA. Moreover, TiO₂/PDVB‐MA composite could be recycled at least four times in the removal of RhB, suggesting that it is a promising photocatalyst to catalyze the degradation of organic pollutants under visible light irradiation.     

The influence of Yb, B, and Ga-doped Er3+:Y3Al5O12 on solar light photocatalytic activity of TiO2 in degradation of organic dyes

Five up-conversion luminescence agents (Er³⁺:Y₃Al₅O₁₂, Er³⁺:Yb _n Y_{3 ? n} Al₅O₁₂, Er³⁺:Y₃B _a Al_{5 ? a} O₁₂, Er³⁺:Y₃Ga _b Al_{5 ? b} O₁₂, and Er³⁺:Yb _n Y_{3 ? n} B _a Ga _b Al_{5 ? a ? b} O₁₂) were synthesized using sol-gel method and then the corresponding coated composites (Er³⁺:Y₃Al₅O₁₂/TiO₂, Er³⁺:Yb _n Y_3?n Al₅O₁₂/TiO₂, Er³⁺:Y₃B _a Al_{5 ? a} O₁₂/TiO₂, Er³⁺:Y₃Ga _b Al_{5 ? b} O₁₂/TiO₂, and Er³⁺:Yb _n Y_{3 ? n} B _a Ga _b Al_{5 ? a ? b} O₁₂/TiO₂) as photocatalysts were prepared by sol-gel coating process. The XRD and SEM were used to confirm the crystalline phase and surface morphology. The UV-vis absorption and fluorescence-emission spectra were used to research the effect of doping category and amount on the up-conversion emission ability. The photocatalytic activities were detected through the degradation of Acid Red B dye in aqueous solution. Some key parameters of catalyst amount and initial concentration of organic dye on solar light photocatalytic degradation were also examined. The extensive feasibility of prepared photocatalysts in solar light degradation was detected by other organic dyes. The results suggest that the photocatalysts can be widely used in sewage treatment.     

Fe2O3/carbon quantum dots complex photocatalysts and their enhanced photocatalytic activity under visible light

In this study, we report the facile fabrication of Fe(2)O(3)/CQDs nanocomposites, and investigate their effective photocatalytic activity for the photodegradation of toxic gas (gas-phase benzene and methanol) under visible light. The crucial roles of CQDs in the enhancement of photocatalytic activity of the Fe(2)O(3)/CQDs composites are illustrated.     

Self-assembled 3D flowerlike hierarchical Fe3O4@Bi2O3 core-shell architectures and their enhanced photocatalytic activity under visible light

Three‐dimensional (3D) flowerlike hierarchical Fe₃O₄@Bi₂O₃ core–shell architectures were synthesized by a simple and direct solvothermal route without any linker shell. The results indicated that the size of the 3D flowerlike hierarchical microspheres was about 420 nm and the shell was composed of several nanosheets with a thickness of 4–10 nm and a width of 100–140 nm. The saturation magnetization of the superparamagnetic composite microspheres was about 41 emu g^?1 at room temperature. Moreover, the Fe₃O₄@Bi₂O₃ composite microspheres showed much higher (7–10 times) photocatalytic activity than commercial Bi₂O₃ particles under visible‐light irradiation. The possible formation mechanism was proposed for Ostwald ripening and the self‐assembled process. This novel composite material may have potential applications in water treatment, degradation of dye pollutants, and environmental cleaning, for example.     

Fast electron transfer and enhanced visible light photocatalytic activity by using poly-o-phenylenediamine modified AgCl/g-C3N4 nanosheets

Exfoliation of bulk graphitic carbon nitride (g-C₃N₄) into two-dimensional (2D) nanosheets is one of the effective strategies to improve its photocatalytic properties so that the 2D g-C₃N₄ nanosheets (CN) have larger specific surface areas and more reaction sites. In addition, poly-o-phenylenediamine (PoPD) can improve the electrical conductivity and photocatalytic activity of semiconductor materials. Here, the novel efficient composite PoPD/AgCl/g-C₃N₄ nanosheets was first synthesized by a precipitation reaction and the photoinitiated polymerization approach. The obtained photocatalysts have larger specific surface areas and could achieve better visible-light response. However, silver chloride (AgCl) is susceptible to agglomeration and photocorrosion. The PoPD/AgCl/CN composite exhibits an extremely high photocurrent density, which is three times that of CN. Obviously enhanced photocatalytic activities of PoPD/AgCl/g-C₃N₄ are revealed through the photodegradation of tetracycline. The stability of PoPD/AgCl/CN is demonstrated based on four cycles of experiments that reveal that the degradation rate only decreases slightly. Furthermore, ?O₂^? and h⁺ are the main active species, which are confirmed through a trapping experiment and ESR spin-trap technique. Therefore, the prepared PoPD/AgCl/CN can be considered as a stable photocatalyst, in which PoPD is added as a charge carrier and acts a photosensitive protective layer on the surface of the AgCl particles. This provides a new technology for preparing highly stable composite photocatalysts that can effectively deal with environmental issues.     

Cuprous oxide/titanium dioxide composite photocatalytic decolorization of reactive brilliant red X-3B dyes wastewater under visible light

Research on Chemical Intermediates - In recent years, how to improve photocatalytic performance under visible light has become one of the research hot topics. The nano-TiO2 particles were...     

Au/BiOBr/石墨烯复合物的制备及其苯酚降解光催化性能

采用水热法和多巴胺还原法制备了Bi OBr、Bi OBr/石墨烯和Au/Bi OBr/石墨烯光催化剂,并利用扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)、光致发光光谱(PL)和紫外-可见漫反射光谱(UV-vis DRS)等方法表征其形貌、相结构、光谱吸收性质以及组成结构。在可见光照射下,通过对水相中苯酚的降解,考察了Au/Bi OBr/石墨烯复合光催化剂活性。结果表明,由于量子效率的提高、带隙能的降低(2.25 e V)以及Au表面等离子体共振,复合光催化剂表现出比纯Bi OBr更高的光催化活性,Au/Bi OBr/石墨烯复合物在180 min内对苯酚降解率可达到64%。     

Cu2O cubic and polyhedral structures versus commercial powder: Shape effect on photocatalytic activity under visible light

A simple precipitation-reduction method was used to prepare cubic and polyhedral Cu₂O structures. Their morphological, structural, optical and electronic properties were analyzed and compared with those of commercial Cu₂O by means of SEM, TEM, XRD, UV–vis DRS, Photoluminescence Spectroscopy and Time Resolved Microwave Conductivity. Methyl orange (MO) photodegradation with visible light (blue-light LEDs, λ = 450–470 nm) was taken as a model reaction to study the photocatalytic activity. According to the results, Cu₂O edge-and corner-truncated polyhedral particles significantly decreased the MO initial concentration by adsorption and photocatalysis, whereas, Cu₂O cubic particles did not show MO adsorption but slightly higher photocatalytic activity than the polyhedral particles. Commercial Cu₂O showed MO adsorption and high electron mobility but it was completely inactive. These results were explained in terms of the crystalline defects that influence both, the adsorption capacity and the photocatalytic activity.     

Evaluation of the reaction mechanism for photocatalytic degradation of organic pollutants with MIL-88A/BiOI structure under visible light irradiation

Research on Chemical Intermediates - In this study, we synthesized novel visible light photocatalyst MIL-88A/BiOI using depositing BiOI particles on the surface of a metal–organic framework...