高效膦基锇配合物磷光材料的结构和光谱性质

采用B3LYP和UB3LYP方法分别优化了一系列(N^N)2Os(P^P)[P^P=1,2-双(膦基)-甲基,N^N=5-(苯并咪唑-2-基)-3-三氟甲基吡啶(1);ibfpH=5-(1-异丙基-苯并咪唑-2-基)-3-三氟甲基吡啶(2);fppzH=5-(吡啶-2-基)-3-三氟甲基吡啶(3);tfpH=5-(噻唑-2-基)-3-三氟甲基吡啶(4);btfpH=5-(苯基噻唑-2-基)-3-三氟甲基吡啶(5)]配合物的基态和激发态结构.计算得到的Os-P(1),Os-N(1)和Os-N(2)基态键长和相应实验值符合较好.相对于基态,激发态几何结构变化较小,与实验上观察到的斯托克斯频移相一致.配合物1-5的最高占据分子轨道主要由Os的d轨道和N^N配体的π轨道构成,而它们的最低空轨道主要由N^N配体的π反键轨道占据,前线分子轨道能量受N^N配体影响较大.在TD-DFT计算水平下结合PCM溶剂模型,得到配合物1-5的最低能吸收和发射分别在415,416,465,458,481nm和541,538,569,629,655nm.这些跃迁均来自于HOMO→LUMO的激发,具有MLCT/ILCT混合跃迁性质,并且它们的高能吸收也具有相似的跃迁特征.发射波长的巨大差异显示出通过调节N^N配体的π电子捐赠能力可以实现对此类配合物发光颜色的调节.     

联吡啶Ir(Ⅲ)配合物电子结构及光谱性质的理论研究

采用密度泛函理论(DFT)对配合物Ir(ppy)2(N^N)+ [ppy=2-phenylpyrine, N^N=bpy= 2,2’-bipyridine(1); N^N=H2dcbpy=4.4’-dicarboxy-2,2’-bipyridine(2), N^N=Hcmbpy=4-carboxy-4’-methyl-2,2’-bipyridine(3)] 的基态和激发态几何构型进行优化, 通过TDDFT/B3LYP方法得到这些化合物在乙腈溶液中的吸收光谱和磷光发射光谱及其跃迁性质. 研究结果表明, 化合物1 (384 nm), 2(433 nm)和3 (413 nm) 最低的吸收谱被指认为MLCT/LLCT[dIr+π(ppy)→π*(N^N)]电荷跃迁. 化合物1(486 nm), 2(576 nm)和3 (567 nm)最低的磷光发射可以描述为[dIr+π(ppy)]→[π*(N^N)]跃迁. 这是由于联吡啶配体上吸电子基团的引入, 稳定了相应的空轨道, 导致了化合物2和3的吸收和发射光谱红移. 同时, 化合物非线性光学性质的计算结果表明, 三种化合物均具有较大的一阶超极化率(β), 联吡啶配体中吸电子基团的增加, 使得分子内电子转移增强, 导致一阶超极化率增大.     

一类[Os(II)(CO)3(tfa)(L)](L=O^O,O^N,N^N)配合物的结构和光谱特征

采用密度泛函理论以及B3LYP方法和单激发组态相互作用(CIS)方法分别优化了一系列[Os(II)(CO)3(tfa)(L)](tfa为三氟乙酸; L=O^O(1), O^N(2), N^N(3), 其中O^O为六氟乙酰丙酮, O^N为羟基喹啉, N^N为3-(三氟甲基)-5-(2-吡啶基)吡唑)配合物的基态和激发态结构. 利用含时密度泛函理论(TD-DFT)结合极化连续溶剂化模型(PCM)计算了配合物在CH2Cl2溶液中的吸收和发射光谱. 研究结果表明, 优化得到的几何结构参数和相应的实验值符合得非常好, 激发态几何构型相对基态变化较小, 这与实验上观察到的较小的斯托克斯频移现象一致. 配合物1-3的最低能吸收分别在342、431和329 nm, 其磷光发射分别在521、638 和488 nm. 配合物1-3的最高占据分子轨道和最低空轨道主要表现为L配体的π和π*轨道特征, 所以它们的最低能吸收归属于π-π*电荷跃迁, 并混有少量的金属到配体的电荷跃迁(MLCT)和配体之间电荷跃迁(LLCT)微扰, 且其高能吸收也表现为配体内部(IL)和配体间(LL)的电荷跃迁. 此外, 它们的磷光发射和吸收有相似的跃迁特征.     

Synthesis, molecular structures, and chemistry of some new palladium(II) and platinum(II) complexes with pentafluorophenyl ligands

A series of palladium(II) and platinum(II) complexes possessing pentafluorophenyl ligands of the general formula [M(L-L)(C6F5)Cl][space](M = Pd 3; L-L=tmeda (N,N,N',N',-tetramethylethylenediamine) a; 1,2-bis(2,6-dimethylphenylimino)ethane) b; dmpe (1,2-bis(dimethylphosphino)ethane) c; dcpe (1,2-bis(dicyclohexylphosphino)ethane) d; Pt ; L-L=tmeda a; 1,2-bis[3,5-bis(trifluoromethyl)phenylimino]-1,2-dimethylethane b; dmpe c; dcpe d) were readily synthesized from the dimer [M(C6F5)(tht)(mu-Cl)2] (M=Pd 1b, Pt 2b; tht=tetrahydrothiophene) and the corresponding bidentate ligand. In the case of palladium, the corresponding iodo analogues (6a-c) were readily synthesized in a one-pot reaction from [Pd2(dba)3], iodopentafluorobenzene, and the appropriate ligand. The platinum complexes 4c-d were then converted to the water complexes [Pt(L-L)(C6F5)(OH2)]OTf (L-L =dmpe 7a; dcpe 7b)via reaction with AgOTf in the presence of water. Attempts to convert the palladium complexes 3c-d to the corresponding water complexes resulted in the disproportionation of the intermediate water complex to form [Pd(L-L)(C6F5)2] (L-L=dmpe 8) or [Pd(L-L)2][OTf]2(L-L=dcpe 9). Upon standing in solution for prolonged periods, complex 7a undergoes an identical disproportionation reaction to the Pd analogues to form [Pt(L-L)(C6F5)2] (L-L=dmpe 10). Complexes 4c and 4d were converted to the corresponding hydrides (11b-c, respectively) using two different hydride sources: 11a was formed by the reaction of with NaBH4 in refluxing THF, while 11b was synthesized in near quantitative yield using [Cp2ZrH2] in refluxing THF. Attempts to synthesize eta2-tetrafluorobenzyne complexes [Pt(L-L)(C6F4)] (L-L=dmpe, dcpe) from reaction of 11a-b with butyllithium were unsuccessful. The molecular structures of 3a,4a, 4c, 4d, 6b, 7a, 8, 11b and have been determined by X-ray crystallographic studies, and are discussed.     

Ligand effects on structures and spectroscopic properties of pyridine-2-aldoxime complexes of Re(CO)3(+): DFT/TDDFT theoretical studies

The series of novel rhenium(I) tricarbonyl mixed-ligand complexes Re(X)(CO)(3)(N^N) (N^N = pyridine-2-aldoxime; X = -Cl, 1; X = -CN, 2; and X = -C≡C, 3) has been investigated theoretically to explore the ligand X effect on their electronic structures and spectroscopic properties. The contribution of the X ligand to the highest occupied molecular orbital (HOMO) and HOMO-1 decreases in the order of 3 > 1 > 2, in line with the π-donating abilities of the X: -C≡C > -Cl > -CN. The reorganization energy (λ) calculations show that 1 and 3 will result in the higher efficiency of organic light-emitting diodes than 2. The lowest-lying absorptions of 1 and 3 can be assigned to the {[d(xz), d(yz)(Re) + π(CO) + π(X)] → [π* (N^N)]} transition with mixing metal-to-ligand, ligand-to-ligand, and X ligand-to-ligand charge transfer (MLCT/LLCT/XLCT) character, whereas this absorption at 354 nm (H-1 → L) of 2 is assigned to {[d(xz), d(yz)(Re) + π(CO) + π(N^N)] → [π* (N^N)]} transition with MLCT/LLCT/ILCT (intraligand charge transfer). Furthermore, the absorptions are red-shifted in the order 2, 1, and 3, with the increase of π-donating abilities of X ligands. The solvent effects cause red shifts of the absorption and emission spectra with decreasing solvent polarity.     

Highly luminescent octanuclear Au(I)-Cu(I) clusters adopting two structural motifs: the effect of aliphatic alkynyl ligands

Reactions of the homoleptic (AuC(2)R)(n) precursors with stoichiometric amount of diphosphine ligand PPh(2)C(6)H(4)PPh(2) (P^P) and Cu(+) ions lead to an assembly of a new family of bimetallic clusters [Au(6)Cu(2)(C(2)R)(6)(P^P)(2)](2+) (type I; R=9-fluorenolyl (1), diphenylmethanolyl (2), 2,6-dimethyl-4-heptanolyl (3), 1-cyclohexanolyl (4), Cy (5), tBu (6)). In the case of R=1-cyclohexanolyl, a structurally different complex [Au(6)Cu(2)(C(2)C(6)H(11)O)(6)(P^P)(3)](2+) (7, type II) could be obtained by treatment of 4 with one equivalent of the diphosphine, while for R=isopropanolyl only the latter type of cluster [Au(6)Cu(2)(C(2)C(3)H(7)O)(6)(P^P)(3)](2+) (8) was detected. Steric bulkiness of the alkynyl ligands and O···H-O hydrogen bonding are suggested to play an important role in stabilizing the type I and type II cluster structural motif, respectively. All the complexes exhibit intense photoluminescence in solution with emission parameters that depending on the geometrical arrangement of the octanuclear metal core. The clusters 1-4 and 6 show single emission band in a blue region (469-488 nm) with maximum quantum yield of 94% (4), while structurally different 7 and 8 emit yellow-orange (590 nm) with unity quantum efficiency. The theoretical DFT calculations of the electronic structures have been carried out to demonstrate that the metal-centered triplet emission within the heterometallic core plays a key role for the observed phosphorescence.     

Silylene hydride complexes of molybdenum with silicon-hydrogen interactions: neutron structure of (eta(5)-C(5)Me(5))(Me(2)PCH(2)CH(2)PMe(2))Mo(H)(SiEt(2))

Reduction of CpMoCl(4) with 3.1 equiv of Na/Hg amalgam (1.0% w/w) in the presence of 1 equiv of dmpe and 1 equiv of trimethylphosphine afforded the molybdenum(II) chloride complex Cp(dmpe)(PMe(3))MoCl (1) (Cp = 1,2,3,4,5-pentamethylcyclopentadienyl, dmpe = 1,2-bis(dimethylphosphino)ethane). Alkylation of 1 with PhCH(2)MgCl proceeded in high yield to liberate PMe(3) and give the 18-electron pi-benzyl complex Cp(dmpe)Mo(eta(3)-CH(2)Ph) (2). Variable temperature NMR experiments provided evidence that 2 is in equilibrium with its 16-electron eta(1)-benzyl isomer [Cp(dmpe)Mo(eta(1)-CH(2)Ph)]. This was further supported by reaction of 2 with CO to yield the carbonyl benzyl complex Cp(dmpe)(CO)Mo(eta(1)-CH(2)Ph) (3). Complex 2 was found to react with disubstituted silanes H(2)SiRR' (RR' = Me(2), Et(2), MePh, and Ph(2)) to form toluene and the silylene complexes Cp(dmpe)Mo(H)(SiRR') (4a: RR' = Me(2); 4b: RR' = Et(2); 4c: RR' = MePh; 4d: RR' = Ph(2)). Reactions of 2 with monosubstituted silanes H(3)SiR (R = Ph, Mes, Mes = 2,4,6-trimethylphenyl) produced rare examples of hydrosilylene complexes Cp(dmpe)Mo(H)Si(H)R (5a: R = Ph; 5b: R = Mes; 5c: R = CH(2)Ph). Reactivity of complexes 4a-c and 5a-d is dominated by 1,2-hydride migration from metal to silicon, and these complexes possess H.Si bonding interactions, as supported by spectroscopic and structural data. For example, the J(HSi) coupling constants in these species range in value from 30 to 48 Hz and are larger than would be expected in the absence of H.Si bonding. A neutron diffraction study on a single crystal of diethylsilylene complex 4b unequivocally determined the hydride ligand to be in a bridging position across the molybdenum-silicon bond (Mo-H 1.85(1) A, Si-H 1.68(1) A). The synthesis and reactivity properties of these complexes are described in detail.     

Beiträge zur Chemie der Alkylverbindungen von Übergangsmetallen. 61. Darstellung und Kristallstruktur von Tetramethyltitan-1,2-bis(dimethylphosphino)ethan

Contributions to the Chemistry of Transition Metal Alkyl Compounds. 61. Preparation and Crystal Structure of Tetramethyltitanium-1,2-bis(dimethylphosphino)ethane The title complex 1 was synthesized by addition of 1,2-bis(dimethylphosphino)ethane to a solution of tetramethyltitanium in diethylether. The complex was characterized by ¹H, ¹³C and ³¹P NMR spectra and by X-ray crystal structure analysis. 1 consists of two independent molecules with distorted octahedral structure.     

Reaction of an alkyne with dinickel-diphenylsilyl complexes. An emissive disilane formed via the consecutive Si-C and Si-Si bond-making processes

[{Ni(dmpe)}(2)(μ-SiHPh(2))(2)] (dmpe = 1,2-bis(dimethylphosphino)ethane) reacted with PhC≡CPh to yield fluorescent 1,2-bis{(E)-1,2-diphenylethenyl}-1,1,2,2-tetraphenyldisilane via addition of the Si-H bond of the ligand to the alkyne and subsequent coupling of the tertiary silyl ligands forming the Si-Si bond.     

Metal-catalyzed phosphinyl ester forming reaction of alcohols and phenols with diphosphine disulfides and a dioxide

Transition metal complexes catalyzed the dialkylphosphinothioation reaction of alcohols and phenols with tetraalkyldiphosphine disulfides in high yields. Phenols were reacted in the presence of RhH(PPh₃)₄ and 1,2-bis(dimethylphosphino)ethane under THF reflux, and alcohols with Pd(OAc)₂ and 1,2-bis(diphenylphosphino)benzene under chlorobenzene reflux. Primary alcohols reacted faster than secondary alcohols under these conditions, and protected tyrosine and serine were phosphinothioated with minimal racemization. Tetraphenyldiphosphine dioxide also underwent the P-O bond formation reaction.     

Theory of late-transition-metal alkyl and heteroatom bonding: analysis of Pt, Ru, Ir, and Rh complexes

Density functional and correlated ab initio methods were used to calculate, compare, and analyze bonding interactions in late-transition-metal alkyl and heteroatom complexes (M-X). The complexes studied include: (DMPE)Pt(CH(3))(X) (DMPE = 1,2-bis(dimethylphosphino)ethane), Cp*Ru(PMe(3))(2)(X) (Cp* = pentamethylcyclopentadienyl), (DMPE)(2)Ru(H)(X), (Tp)(CO)Ru(Py)(X) (Tp = trispyrazolylborate), (PMe(3))(2)Rh(C(2)H(4))(X), and cis-(acac)(2)Ir(Py)(X) (acac = acetylacetonate). Seventeen X ligands were analyzed that include alkyl (CR(3)), amido (NR(2)), alkoxo (OR), and fluoride. Energy decomposition analysis of these M-X bonds revealed that orbital charge transfer stabilization provides a straightforward model for trends in bonding along the alkyl to heteroatom ligand series (X = CH(3), NH(2), OH, F). Pauli repulsion (exchange repulsion), which includes contributions from closed-shell d(π)-p(π) repulsion, generally decreases along the alkyl to heteroatom ligand series but depends on the exact M-X complexes. It was also revealed that stabilizing electrostatic interactions generally decrease along this ligand series. Correlation between M-X and H-X bond dissociation energies is good with R(2) values between 0.7 and 0.9. This correlation exists because for both M-X and H-X bonds the orbital stabilization energies are a function of the orbital electronegativity of the X group. The greater than 1 slope when correlating M-X and H-X bond dissociation energies was traced back to differences in Pauli repulsion and electrostatic stabilization.     

Design and synthesis of iridium bis(carbene) complexes for efficient blue electrophosphorescence

Five iridium bis(carbene) complexes, [Ir(pmi)(2)(pypz)] (1), [Ir(mpmi)(2)(pypz)] (2), [Ir(fpmi)(2)(pypz)] (3), [Ir(fpmi)(2)(pyim)] (4), and [Ir(fpmi)(2)(tfpypz)] (5) (pmi=1-phenyl-3-methylimdazolin-2-ylidene-C,C(2'); fpmi=1-(4-fluorophenyl)-3-methylimdazolin-2-ylidene-C,C(2'); mpmi=1-(4-methyl-phenyl)-3-methylimdazolin-2-ylidene-C,C(2'); pypz=2-(1H-pyrazol-5-yl)pyridinato; pyim=2-(1H-imidazol-2-yl)pyridinato; and tfpypz=2-(3-(trifluoromethyl)-1H-pyrazol-5-yl)pyridinato), were synthesized and their structures were characterized by NMR spectroscopy, mass spectroscopy and X-ray diffraction. These complexes showed phosphorescent emission with the emission maxima between 453 and 490 nm. Various spectrophotometric measurements, cyclic voltammetric studies, and density functional theory (DFT) calculations show that, unlike most of the phosphorescent cyclometalated iridium complexes, the lowest unoccupied molecular orbital (LUMO) energy and the emissive state of these iridium complexes are mainly controlled by the N,N'-heteroaromatic (N^N) ligand. Despite the fact that the LUMO levels of these complexes are mainly on the N^N ligands, the efficiencies of the electroluminescent (EL) devices are very high. For example, the EL devices using [Ir(mpmi)(2)(pypz)], [Ir(fpmi)(2)(pypz)], and [Ir(fpmi)(2)(tfpypz)] as the dopant emitters exhibited light- to deep-blue electrophosphorescence with external quantum efficiencies of 15.2, 14.1, and 7.6% and Commission Internationale d'énclairage (x,y) coordinates (CIE(x,y)) of (0.14, 0.27), (0.14, 0.18) and (0.14, 0.10), respectively.     

Synthons for coordinatively unsaturated complexes of tungsten, and their use for the synthesis of high oxidation-state silylene complexes

Reduction of Cp*WCl4 afforded the metalated complex (eta6-C5Me4CH2)(dmpe)W(H)Cl (1) (Cp* = C5Me5, dmpe = 1,2-bis(dimethylphosphino)ethane). Reactions with CO and H(2) suggested that 1 is in equilibrium with the 16-electron species [Cp(dmpe)WCl], and 1 was also shown to react with silanes R2SiH2 (R2 = Ph2 and PhMe) to give the tungsten(IV) silyl complexes Cp*(dmpe)(H)(Cl)W(SiHR2) (6a, R2 = Ph2; 6b, R2 = PhMe). Abstraction of the chloride ligand in 1 with LiB(C6F5)4 gave a reactive species that features a doubly metalated Cp ligand, [(eta7-C5Me3(CH2)2)(dmpe)W(H)2][B(C6F5)4] (4). In its reaction with dinitrogen, 4 behaves as a synthon for the 14-electron fragment [Cp*(dmpe)W]+, to give the dinuclear dinitrogen complex ([Cp*(dmpe)W]2(micro-N2)) [B(C6F5)4]2 (5). Hydrosilanes R2SiH2 (R2 = Ph2, PhMe, Me2, Dipp(H); Dipp = 2,6-diisopropylphenyl) were shown to react with 4 in double Si-H bond activation reactions to give the silylene complexes [Cp*(dmpe)H2W = SiR2][B(C6F5)4] (8a-d). Compounds 8a,b (R2 = Ph2 and PhMe, respectively) were also synthesized by abstraction of the chloride ligands from silyl complexes 6a,b. Dimethylsilylene complex 8c was found to react with chloroalkanes RCl (R = Me, Et) to liberate trialkylchlorosilanes RMe2SiCl. This reaction is discussed in the context of its relevance to the mechanism of the direct synthesis for the industrial production of alkylchlorosilanes.     

The structure and dynamics of FeH(DMPE)2(BH4), FeH(DEPE)2(BH4) and FeH(DPrPE)2(BH4): Iron complexes containing monodentate borohydride ligands

FeH(DMPE)₂(BH₄) [DMPE = 1,2-bis(dimethylphosphino)ethane] is a stable, diamagnetic complex which can be synthesized readily by borohydride reduction of FeH(DMPE)₂Cl or by treatment of Fe(DMPE)₂H₂ with borane. The complex contains an unsupported B? H? Fe hydrogen bridge. Analogous complexes with bulkier ligands, FeH(DEPE)₂(BH₄), [DEPE = 1,2-bis(diethylphosphino)ethane] and FeH(DPrPE)₂(BH₄) [DPrPE = 1,2-bis(di-n-propylphosphino)ethane], are less stable. In all complexes, in solution the borohydride ligand undergoes rapid internal motion, with all four boron-bound hydrogens interchanging environments. The barriers for BH₄ reorientation (measured by NMR spectroscopy) are in the sequence FeH(DMPE)₂(BH)₄ > FeH(DEPE)₂(BH)₄ > FeH(DPrPE)₂(BH₄).     

Time-resolved spectroscopic studies on phenyl-substituted poly(phenylenevinylene)s by picosecond excite- and probe technique

Photoinduced picosecond absorption spectra of poly(1,4-phenylene-1,2-diphenylvinylene) (DP-PPV) and of related oligomeric and polymeric compounds were investigated in toluene solution. Between 400 and 900 nm the rise (5 … 40 ps) and decay (40 … 300 ps) of three transient absorption bands have been observed. The low energy absorption appears with a time delay of 5 ps and has its peak at 680 nm (1.8 eV). This band position is coincident with the well known ECS radical ion (polaron) absorption and is therefore assigned to this type of photogenerated charged species. The other two absorptions appear at higher energies. One of them is situated at 2.8 eV which is near to the band edge (2.9 eV). It originates immediately with the exciting pulse and is attributed to a neutral excited state. The other one (2.7 eV) is suggested to be due to an ECS diion (bipolaron).     

Modification of Luminescent Iridium(III) Polypyridine Complexes with Discrete Poly(ethylene glycol) (PEG) Pendants: Synthesis,Emissive Behavior,Intracellular Uptake,and PEGylation Properties

We report the synthesis, characterization, and photophysical properties of a new class of luminescent cyclometalated iridium(III) polypyridine poly(ethylene glycol) (PEG) complexes [Ir(N^C)₂(N^N)](PF₆) (HN^C=Hppy (2‐phenylpyridine), N^N=bpy? CONH? PEG1 (bpy=2,2′‐bipyridine; 1 a ), bpy? CONH? PEG3 ( 1 b ); HN^C=Hpq (2‐phenylquinoline), N^N=bpy? CONH? PEG1 ( 2 a ), bpy? CONH? PEG3 ( 2 b ); HN^C=Hpba (4‐(2‐pyridyl)benzaldehyde), N^N=bpy? CONH? PEG1 ( 3 )) and their PEG‐free counterparts (N^N=bpy? CONH? Et, HN^C=Hppy ( 1 c ); HN^C=Hpq ( 2 c )). The cytotoxicity and cellular uptake of these complexes have been investigated by the MTT assay, ICPMS, laser‐scanning confocal microscopy, and flow cytometry. The results showed that the complexes supported by the water‐soluble PEG can act as biological probes and labels with considerably reduced cytotoxicity. Because the aldehyde groups of complex 3 are reactive toward primary amines, the complex has been utilized as the first luminescent PEGylation reagent. Bovine serum albumin (BSA) and poly(ethyleneimine) (PEI) have been PEGylated with this complex, and the resulting conjugates have been isolated, purified, and their photophysical properties studied. The DNA‐binding and gene‐delivery properties of the luminescent PEI conjugate 3 ‐PEI have also been investigated.     

Cobalt (iron) thiolato complexes containing the Co-ligand phosphine and reaction products of the structural fragment ML 2 L′ (L = 1,2-bidentate thiolate,L′= tertiary phosphine)

Mono-, di-, tri-, and tetra-nuclear cobalt (iron) complexes containing co-ligands phosphine and thiolate are presented according to the classification by combination of different dentates of the two ligands. Emphasis is being put on the triand tetranuclear cluster complexes of monodentate phosphines and 1,2-bidentate thiolates. These complexes are considered to be constructed based on the general structural fragment (or building block) ML ₂L (L=1,2-bidentate thiolate,L=tertiary phosphine). Structural regularities are presented in Tables I, III, IV, and V and discussed. FAB mass spectroscopic data showed the possible fragmentation patterns. Synergism of the cluster skeletons is proposed to explain the occurrence of the distinct structural modes.Abbreviations Bu _n ³ P tri-n-butylphosphine - dmpe 1,2-bis(dimethylphosphino)ethane - dmpm 1,2-bis(dimethylphosphino)methane - dppe 1,2-bis(diphenylphosphino)ethane - dppep bis(2-diphenylphosphinoethyl)phenylphosphine - dppm 1,1-bis(diphenylphosphino)methane - dppp 1,3-bis(diphenylphosphino)propane - Et₃P triethylphosphine - Ph₃P triphenylphosphine - tepme 1,1,1-tris(diethylphosphinomethyl)ethane - tppme 1,1,1-tris(diphenylphosphinomethyl)ethane - H₂bdt 1,2-benzenedithiol - H₂edt 1,2-ethanedithiol - Hmbt 2-mercaptobenzothiazole - H₂mp 2-mercaptophenol - Hmp 2-hydroxythiophenolate - Hmpo 2-mercaptopyridine-N-oxide - H₂mpp 2-mercapto-3-hydroxypyridine - Hmpp 3-hydroxy-2-pyridinothiolate - H₂pdt 1,2-propanedithiol - HSPh thiophenol - H₂tdt 4-methyl-1,2-benzenedithiol(4-toluenedithiol) - R₂dtc dialkyldithiocarbamate - (RO)₂dtp dialkyldithiophosphate     

Effect of pi-conjugated length of bridging ligand on the optoelectronic properties of platinum(II) dimers

We report a quantum-chemical study of the electronic and optical properties of several platinum(II) dimers, [Pt(pip2NCN)]2(L)(2+) (pip2NCNH = 1,3-bis(piperidylmethyl)benzene, L represents the bridging ligands pyrazine, 4,4'-bipyridine, or trans-1,2-bis(4-pyridyl)ethylene). The theoretical calculations reveal that as the pi-conjugated length of bridging ligand increases, the energies of HOMOs and LUMOs, bonding energy of Pt-N bridge, and the largest absorption strength increase whereas the ionization potentials decrease. According to the inner reorganization energy and density of states, we presume the hole-transporting properties of these dimers is better than the electron-transporting, and their inner reorganization energies for hole transport are lower than that of 4,4'-bis(phenyl-m-tolylamino)biphenyl (TPD), a well-known hole-transporting material. These platinum(II) dimers, especially [Pt(pip2NCN)]2(bpe)(2+), hold promise for use as a new kind of third-order nonlinear optical material, owing to their large third-order polarizabilty value and high transparency. Moreover, the optoelectronic properties of these complexes are easy to tailor by modifying the peripheral and central ligands. These theoretical results are beneficial to the design of new functional materials with excellent optoelectronic properties.     

几种荧光有机化合物的电荷转移光谱

具有荧光的有机化合物是一些具有多个共轭双键,分子呈平面结构,有大的电子离域体系的化合物.