The transport gap of organic semiconductors studied using the combination of direct and inverse photoemission

The combination of valence band photoemission and inverse photoemission spectroscopy is applied to study the densities of occupied and unoccupied states of perylene derivative and phthalocyanine organic layers on inorganic semiconductors. The ionisation energies and electron affinities are determined and it is proposed that the transport gap of the materials can be evaluated from the distance of the HOMO and LUMO edges. The resulting values for the transport gap which are somewhat smaller than other published data are in good agreement with e.g. electrical measurements. The experimental spectra are compared with simulated ones obtained by density functional theory calculations.     

Molecular structure and substitution effects on diphenylanthrazolines for organic semiconductors: A theoretical study

A theoretical model for calculating molecular structure parameters of a series of diphenylanthrazolines with different substitutes by using density functional theory B3LYP/6-31G^* is presented. In addition, a theoretical characterization for molecular structure without the substitute radical (4,9-diphenylanthrazoline) was performed. Furthermore, the highest occupied molecular orbitals and lowest unoccupied molecular orbitals, gap energy, ionization potential, and electronic affinity were obtained by means of density functional theory calculations and compared with experimental data. The results showed a decrease in gap energies when incorporating radicals to the base anthrazoline structure.     

Photoluminescence emission behavior on the reduced band gap of Fe doping in CeO2-SiO2 nanocomposite and photophysical properties

Fe/CeO₂-SiO₂ nanocomposite was synthesized via hydrothermal method. Bond length of nanocomposite was determined through FTIR analysis, while Raman analysis showed lattice relaxation of CeO₂ phase in Fe/CeO₂-SiO₂. TEM, XRD and DLS-PSA revealed an increase in size of Fe/CeO₂-SiO₂ as compared to CeO₂-SiO₂ which was attributed to have more oxygen vacancies in CeO₂ after doping of iron. Lattice contraction was also observed in some phases of CeO₂ in Fe/CeO₂-SiO₂ nanocomposite as compared to CeO₂-SiO₂ nanocomposite. This contraction was used for determination of Fe content incorporated in CeO₂ [1 1 1] phase. The band gap values of Fe/CeO₂-SiO₂ nanocomposite were found reduced after doping of Fe by factors of 0.62 and 0.55 eV, respectively. Photoluminescence study of the materials was carried out to study the different type of transitions occurring after absorption of electromagnetic radiation. Photoluminescence intensity at 2.12 eV was found enhanced after doping of Fe due to increased oxygen vacancy. Photocatalytic activity of the nanocomposites was studied with the degradation of chlorpyrifos pesticide.     

Systematic study of photoluminescence upon band gap excitation in perovskite-type titanates R1/2Na1/2TiO3:Pr (R=La, Gd, Lu, and Y)

Pr³⁺-doped perovskites R_1/2Na_1/2TiO₃:Pr (R=La, Gd, Lu, and Y) were synthesized, and their structures, optical absorption and luminescent properties were investigated, and the relationship between structures and optical properties are discussed. Optical band gap of R_1/2Na_1/2TiO₃ increases in the order R=La, Gd, Y, and Lu, which is primarily due to a decrease in band width accompanied by a decrease in Ti-O-Ti bond angle. Intense red emission assigned to f-f transition of Pr³⁺ from the excited ¹D₂ level to the ground ³H₄ state upon the band gap photo-excitation (UV) was observed for all compounds. The wavelength of emission peaks was red-shifted in the order R=La, Gd, Y, and Lu, which originates from the increase in crystal field splitting of Pr³⁺. This is attributed to the decrease in inter-atomic distances of Pr-O together with the inter-atomic distances (R, Na)-O, i.e., increase in covalency between Pr and O. The results indicate that the luminescent properties in R_1/2Na_1/2TiO₃:Pr are governed by the relative energy level between the ground and excited state of 4f² for Pr³⁺, and the conduction and valence band, which is primarily dependent on the structure, e.g., the tilt of TiO₆ octahedra and the Pr-Ti inter-atomic distance and the site symmetry of Pr ion.     

Different van der Waals radii for organic and inorganic halogen atoms: a significant improvement in IMOMM performance

The discrepancies between X-ray and integrated molecular orbital molecular mechanics computed geometries for Os(H)₂Cl₂(PⁱPr₃)₂ and Ir(H)₂Cl(P^tBu₂ Ph)₂ are explained by the inadequacy of the default molecular mechanics van der Waals radii for halogen elements. A simple procedure is proposed for the calculation of corrected van der Waals radii, and the application of the corrected radius for chloride is shown to improve substantially the results for the systems under test. Received: 25 February 1997 / Accepted: 7 April 1997     

Experimental determination of the dependence of the free electron—hole recombination rate constant on the band gap in semiconductors of the AIIBVI and AIBVII types

A correlation between the recombination rate constant of free electrons and holes (k _r) and the band gap (E _g) of semiconductors (AgCl, AgBr, Cd_xZn_1−x S, CdSe, CdTe, and their solid solutions) at 295 K was found. The experimental data were obtained by the UHF photoconductivity (36 GHz) using current carrier generation by laser pulses (λ = 337 nm, pulse duration 8 ns). A decrease in E _g in a range of 1.5–3 eV increases k _r by 1.5 orders of magnitude according to the law close to exponential. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 856–860, May, 2007.     

Medium band gap conjugated polymers from thienoacene derivatives and pentacyclic aromatic lactam as promising alternatives of poly(3‐hexylthiophene) in photovoltaic application

Two alternating medium band gap conjugated polymers (PBDT‐TPTI and PDTBDT‐TPTI) derived from 4,8‐bis(4,5‐dioctylthien‐2‐yl)benzo[1,2‐b:4,5‐b′]dithiophene (BDT‐T) or 5,10‐bis(4,5‐didecylthien‐2‐yl)dithieno[2,3‐d:2′,3′‐d′]benzo[1,2‐b:4,5‐b′]dithiophene (DTBDT‐T) with pentacyclic aromatic lactam of N,N‐didodecylthieno[2′,3′:5,6]pyrido[3,4‐g]thieno[3,2‐c]‐iso‐quinoline‐5,11‐dione (TPTI), are synthesized and characterized. The comparative investigation of the photostabilities of the copolymers revealed that the PDTBDT‐TPTI film exhibited the comparable photostability in relative to P3HT. Meanwhile, the inverted photovoltaic cells (i‐PVCs) from the blend films of PBDT‐TPTI and/or PDTBDT‐TPTI with PC₇₁BM, in which poly[(9,9‐bis(3′‐(N,N‐dimethylamino)propyl)‐2,7‐fluorene)‐alt‐2,7‐(9,9‐dioctylfluorene)] were used as cathode modifying interlayer, presented higher power conversion efficiencies (PCEs) of 5.98% and 6.05% with photocurrent response ranging from 300 nm to 650 nm in contrast with the PCEs of 4.48% for the optimal inverted PVCs from P3HT/PC₇₁BM under AM 1.5 G 100 mW/cm². The PCEs of the i‐PVCs from PBDT‐TPTI and PDTBDT‐TPTI were improved to 7.58% and 6.91% in contrast to that of 0.02% for the P3HT‐based i‐PVCs, and the photocurrent responses of the devices were extended to 300–792 nm, when the ITIC was used as electron acceptor materials. The results indicate that the PBDT‐TPTI and PDTBDT‐TPTI can be used as the promising alternatives of notable P3HT in the photovoltaic application. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 85–95     

Simultaneous studies of pressure effect on charge transport and photophysical properties in organic semiconductors: A theoretical investigation

High-mobility and strong luminescent materials are essential as an important component of organic photodiodes, having received extensive attention in the field of organic optoelectronics. Beyond the conventional chemical synthesis of new molecules, pressure technology, as a flexible and efficient method, can tune the electronic and optical properties reversibly. However, the mechanism in organic materials has not been systematically revealed. Here, we theoretically predicted the pressure-depended luminescence and charge transport properties of high-performance organic optoelectronic semiconductors, 2,6-diphenylanthracene (DPA), by first-principle and multi-scale theoretical calculation methods. The dispersion-corrected density functional theory (DFT-D) and hybrid quantum mechanics/molecular mechanics (QM/MM) method were used to get the electronic structures and vibration properties under pressure. Furthermore, the charge transport and luminescence properties were calculated with the quantum tunneling method and thermal vibration correlation function. We found that the pressure could significantly improve the charge transport performance of the DPA single crystal. When the applied pressure increased to 1.86 GPa, the hole mobility could be doubled. At the same time, due to the weak exciton coupling effect and the rigid flat structure, there is neither fluorescence quenching nor obvious emission enhancement phenomenon. The DPA single crystal possesses a slightly higher fluorescence quantum yield ～ 0.47 under pressure. Our work systematically explored the pressure-dependence photoelectric properties and explained the inside mechanism. Also, we proposed that the external pressure would be an effective way to improve the photoelectric performance of organic semiconductors.     

Solitonic waves in polyene dications and principles of charge carrier localization in π‐conjugated organic materials

The quantum‐chemical investigations by ab initio method (restricted Hartree–Fock/6‐31G**) have been performed for a series of unsubstituted, monosubstituted, and disubstituted neutral polyenes and their double charged cations. The waves of charge alternation (characterized by the difference in the electron densities at the nearest carbon atoms or Δq function) and bond length alternation (characterized by the lengths difference of the nearest carbon–carbon bonds or Δl function) are reported. Comparisons are made with the corresponding monocationic polymethine molecules. We found that ionization by two electrons results in formation of two solitonic waves of charge alternation, rather than superposition of two overlapping solitonic waves into one. These waves behave similar to two independent elastic particles, which do not penetrate into each other despite the special confinement by the length of chromophore π‐system. In monosubstituted polyene dication, Δq and Δl functions contain two waves each; however, only one wave is mobile and sensitive to a change of the chemical nature of the terminal group, whereas the second wave remains practically unchanged. The introduction of one oxymethyl or phenyl terminal groups leads to a relatively small shift of the mobile wave from the center to a direction of the terminal group. The effect of the amino or tropilium terminal groups is much more pronounced and leads to a shift of the mobile wave to the end of the molecule. In disubstituted polyene dication, both solitonic waves become mobile and shift symmetrically to both ends. The general principles of the charge localization described in this study may be used in molecular design and fine‐tuning of the charge transport properties in plastic photovoltaics and other organic semiconducting materials. © 2012 Wiley Periodicals, Inc.     

Internal rotation in squaramide and related compounds. A theoretical ab initio study

The structural and energetic changes associated with C–N bond rotation in a squaric acid derivative as well as in formamide, 3-aminoacrolein and vinylamine have been studied theoretically using ab initio molecular orbital methods. Geometry optimizations at the MP2(full)/6-31+G* level confirmed an increase in the C–N bond length and a smaller decrease in the C=O length on going from the equilibrium geometry to the twisted transition state. Other geometrical changes are also discussed. Energies calculated at the QCISD(T)/6-311+G** level, including zero-point-energy correction, show barrier heights decreasing in the order formamide, squaric acid derivative, 3-aminoacrolein and vinylamine. The origin of the barriers were examined using the atoms-in-molecules approach of Bader and the natural bond orbital population analysis. The calculations agree with Pauling's resonance model, and the main contributing factor of the barrier is assigned to the loss of conjugation on rotating the C–N bond. Finally, molecular interaction potential calculations were used to study the changes in the nucleophilicity of N and O (carbonyl) atoms upon C–N rotation, and to obtain a picture of the abilities of the molecules to act in nonbonded interactions, in particular hydrogen bonds. The molecular interaction potential results confirm the suitability of squaramide units for acting as binding units in host–guest chemistry. Received: 13 March 2002 / Accepted: 23 June 2002 / Published online: 21 August 2002     

Cyclometalated complexes containing ferrocenyl Schiff base: Preparation,characterization, DFT calculations,application in cancer and biological researches and MOE studies

A series of transition metal (II/III) complexes containing organometallic Schiff base ligand (H₂L) had been synthesized and characterized by using elemental analysis (C, H, N, M), molar conductivity, IR, UV–Vis, ¹H NMR and mass spectral analysis. Also, their TG and DTG behaviors were investigated. The ligand was prepared by condensation of 4-aminosalicylic acid with 2-acetylferrocene in 1:1 M ratio. The data of elemental analysis indicated that the prepared complexes were synthesized also in a 1:1 M ratio. The ligand behaved as neutral bidentate ligand that coordinated to metal ions through protonated O-phenolic and protonated carboxylic-OH groups. All complexes had octahedral structure. DFT calculations for H₂L ligand were determined with some parameters such as HOMO-LUMO energy gab, electronegativity and chemical hardness–softness. Antimicrobial activity of both H₂L Schiff base ligand and its metal complexes was tested against different strains of bacteria and fungi species. Furthermore, all compounds had been screened for their anticancer activities against breast cancer (MCF-7) cell line. [Cu(H₂L)(H₂O)₂Cl₂]·2H₂O complex had the lowest IC₅₀ value = 47.3 µg/mL. For determining the more effective and probable binding mode between the H₂L ligand, Co(II) and Zn(II) complexes with different active sites of 4K3V, 2YLB and 3DJD receptors, so molecular docking studies were investigated.