Synthesis and structures of heterobimetallic Ir2M (M=Pd, Pt) sulfido clusters and their catalytic activity for regioselective addition of alcohols to internal 1-aryl-1-alkynes

The heterobimetallic trinuclear sulfido clusters [(Cp*Ir)₂(μ₃-S)₂MCl₂] (M=Pd (3), Pt (4); Cp*=η⁵-C₅Me₅) were synthesized from the dinuclear hydrogensulfido complex [Cp*IrCl(μ-SH)₂IrCp*Cl] (2) and [MCl₂(COD)] (COD=cycloocta-1,5-diene), while the reaction of 2 with [Pd(PPh₃)₄] afforded the cationic trinuclear cluster [(Cp*Ir)₂(μ₃-S)₂PdCl(PPh₃)]Cl (5). Clusters 3 and 4 reacted with PPh₃ to give a series of mono and dicationic clusters including 5, while the dicationic clusters [(Cp*Ir)₂(μ₃-S)₂M(dppe)][BPh₄]₂ (M=Pd (9), Pt (10); DPPE=Ph₂PCH₂CH₂PPh₂) were obtained by the reaction with dppe followed by anion metathesis. The molecular structures of 5·CH₂Cl₂, 9·CH₃COCH₃, and 10·CH₃COCH₃ were determined by X-ray crystallography. Clusters 3 and 4 were found to catalyze the addition of alcohols to alkynes to give the corresponding acetals. Internal 1-aryl-1-alkynes were transformed by cluster 3 into the corresponding 2,2-dialkoxy-1-arylalkanes with high regioselectivity up to 99:1, while cluster 4 was a much less regioselective catalyst.     

New rhodium---ruthenium heterobimetallic complexes with bridging bi- or tri-dentate phosphine ligands

The mononuclear chelated complex [RuCl(Cp)(η²-dppa)] has been synthesised and reacted with [Rh₂Cl₂(CO)₄] to form the heterobimetallic complex [(Cp)Ru(μ-CO)₂{(μ-Ph₂PN(H)PPh₂}RhCl₂]. Complexes of [RuCl(Cp){(PPh₂)₂CHCH₂PPh₂}] have been reacted with [Rh₂Cl₂(CO)₄] or [RhCl(CO)₂(p-toluidene)]. Characterisation of these new ruthenium complexes was carried out using ³¹P-NMR, FAB mass spectroscopy, elemental analysis and IR spectrophotometry.     

Normal coordinate analysis of MSiH3 moieties in transition metal complexes and comparison to results obtained for silyl halides

In order to examine the influence of the transition metal on the metal-silyl fragment MSiH₃ and the metal-silicon bond, polarized Raman spectra of the complexes (C₅R₅)(CO)₂FeSiH₃ R = H (Cp) (1a), Me (Cp^*) (1b)], (C₅H₅)(CO)(PPh₃)FeSiH₃ (1c), (C₅Me₅)(CO)₂RuSiH₃ (2), (C₅R₅)(CO)₂(PMc₃)MoSiH₃ [R = H (3a), Me (3b)], and (C₅R₅)(CO)₂(PMe₃)WSiH₃ [R = H(4a), Me (4b)] have been recorded. The spectral data have been evaluated and interpreted on the basis of a normal coordinate analysis of the MSiH₃ core and the derived force constants and potential energy distributions were compared to results obtained for analogous halogen derivatives in the series XSiH₃ [X = Br (5), I (6)].     

The chemistry of compounds of the type Ru(η---C5Me4Et)(CO)2X (X=Cl, Br or I)

The title compounds react with unidentate ligands, L, containing either phosphorus or arsenic donor atoms to yield the corresponding compounds of the type Ru(η⁵---C₅Me₄Et)(CO)LX; with didentate phosphorus donor ligands the major species formed is the bridged complex {Ru(η⁵---C₅Me₄Et)(CO)X}₂{Ph₂P(CH₂)_nPPh ₂} n = 1, X = Br; n = 2, X = Cl). In contrast, unidentate ligands containing nitrogen donor atoms such as pyridine did not react with Ru(η⁵---C₅Me₄Et)(CO)₂Cl although reaction with 1,10-phenanthroline or diethylenetriamine yielded the ionic products [Ru(η⁵---C₅Me₄Et)(CO)L]⁺Cl⁻ (L = phen or (NH₂CH₂CH₂)₂NH). Reaction of Ru(η⁵---C₅Me₄Et)(CO)₂Br with AgOAc yielded the corresponding acetato complex Ru(η⁵---C₅Me₄Et)(CO)₂0Ac. Ru(η⁵--- C₅Me₄Et)(CO)₂X reacts with AgY (Y = BF₄ or PF₆) in either acetone or dichloromethane to give the useful solvent intermediates [Ru(η⁵---C₅Me₄Et)(CO)₂(solvent)]⁺Y⁻, which readily react with ligands L to yield ionic derivatives of the type [Ru(η⁵---C₅Me₄Et)(CO)₂L]⁺Y⁻ (where L = CO, NCMe, py, C₂H₄ or MeO₂CCCCO₂Me).     

Zur reaktion von metall-koordiniertem kohlenmonoxid mit yliden : XX. “Ylidreaktionen” einfacher dicarbonyl(pentamethylcyclopentadienyl)rutheniumkomplexe

Treatment of the dimer complex [C₅Me₅ (CO)₂ Ru]₂ (1) with HBF₄ in CH₂Cl₂ at room temperature yields the hydrido-bridged dinuclear complex [(C₅Me₅)₂Ru₂(CO)₄H]BF₄ (2), and after refluxing in propionic anhydride [C₅Me₅(CO)₃Ru]BF₄ (5) is obtained, UV-irradiation of 1 in the presence of H₂CHal₂ (Hal = Cl, I) or trimethylphosphine leads to the formation of C₅Me₅(CO)₂Ru-Hal (3a, 3b) or C₅Me₅(CO)(Me₃P)RuH (4) respectively. Exchange reactions of 3a, 3b with LiAlH₄, NaOMe and Me₃ P give the complexes C₅Me₅(CO)₂RuX (6a,6b) (X=H, OMe), C₅Me₅(CO)(Me₃P)Ru-Hal (7a,7b) (Hal = Cl, I) and C₅Me₅(Me₃P)₂RuI (8). The interaction of 3b or 5 with Me₃P=CH₂ leads to the formation of the ylide complex [C₅Me₅(CO)(Me₃P)-RuCH₂PMe₃)Cl (9) or the rutheniumacyl-ylide C₅Me₅(CO)₂RuC(O)CH=PMe₃ (10). 4 reacts with Me₃P=CH₂ to give C₅Me₅(CO)(Me₃P)RuMe (11) and Me₃P via the intermediate formation of the phosphonium salt Me₄P[Ru(CO) (Me₃P)-C₅Me₅].     

Rhodium complexes with dioximes as catalysts of hydroformylation and hydrogenation of 1-hexene

Rhodium(II) complexes with dioximes [Rh(Hdmg)₂(PPh₃)]₂ [I] (Hdmg=monoanion of dimethylglyoxime) and [Rh(Hdmg)(ClZndmg)(PPh₃)]₂ [II] catalyse hydroformylation and hydrogenation reactions of 1-hexene at 1 MPa CO/H₂ and 0.5 MPa H₂ at 353 K, respectively. Hydroformylation with complex [I] produces 94% of aldehydes (n/iso=2.2) and 6% 2-hexene whereas the second catalyst [II] gives ca. 40% of aldehydes (n/iso=2.1) and 60% of 2-hexene. Corresponding Rh(III) complexes are inactive in hydroformylation except of RhH(Hdmg)₂(PPh₃) [III], which shows activity similar to [I]. Complexes [Rh(Hdmg)₂(PPh₃)]₂ [I], [Rh(Hdmg)(ClZndmg)(PPh₃)]₂ [II], RhH(Hdmg)₂(PPh₃) [III] and [Rh(Hdmg)₂(PPh₃)₂]ClO₄ [V] catalyse 1-hexene hydrogenation with an average TON ca. 18 cycles/mol [Rh]×min. Complex [II] has also been found to catalyse hydrogenation of cyclohexene, 1,3-cyclohexadiene and styrene.     

Synthesis of Re-Ru heterobimetallic polyhydride complexes. Study of the influence of ligands bonded to the monometallic precursors on the nature of the isolated binuclear complexes

The reaction of K[H₆ReL₂] with [RuHCl(CO)(PPh₃)_3−x {P(OPrⁱ}₃)_x](L₂ = (PMePh₂)₂, dppe, (AsPh₃)₂, or (PPh₃)₂; x = 0, 1 or 2) leads to [L₂(CO)HRe(μ-H)₃RuH(PPh₃)_2−y{P(OPrⁱ)₃}_y] (x = 0 or 1, Y = 0; X = 2, Y = 1(L₂ = PPh₃)) in a first step. Under the reaction conditions most of these complexes react rapidly with the liberated phosphine giving [L₂(CO)Re(μ-H)₃Ru(PPh₃)_3−y- {P(OPrⁱ)₃}_y] (L₂ = (PMePh₂)₂ or dppe, Y = 0; L₂ = (PPh₃)₂, Y = 1) as the only iso complexes. The structure of [(PMePh₂)₂(CO)Re(μ-H)₃Ru(PPh₃)₃] has been establishedby X-ray structure analysis. The complex [(PPh₃)₂(CO)Re(μ-H)₃Ru(PPh₃)₂(P(OPrⁱ)₃)] reacts with molecular hydrogen under pressure to generate [L₂(CO)HRe(μ-H)₃RuH(PPh₃)(P(OPrⁱ)₃) as the sole product.     

Attempts at stepwise reduction of the carbon-nitrogen triple bond of a nitrile at two metal centres: study of the reactivity of [(CO)(PPh3)2Re( (μ-NCHPh)Ru(PPh3) 2(PhCN)] towards tetrafluoroboric acid and dihydrogen

The reaction of [(CO)PPh₃)₂Re(μ-H)₂(μ-NCHPh)Ru(PPh₃)₂(PhCN)] (2) with HBF₄-Me₂O generates [(CO)PPh₃)₂Re(μ- H)₂(μ,η¹,η²HNCHPh)Ru(PPh₃)₂(PhCN)][BF₄] (3). Monitoring the reaction by NMR spectroscopy shows the intermediate formation of [(CO)(PPh₃)₂ HRe(μ-H)₂(μ-NCHPh)Ru(PPh₃)₂(PhCN)][BF₄] (4). Attempted reduction of the imine ligand by a nucleophile (H⁻ or CN⁻) failed, regenerating 2. Under dihydrogen at 50 atm, 3 is slowly transformed into [(CO)(PPh₃)₂HRe(μ-H)₃Ru(PPh₃)₂(PhCN)][BF₄] (5) with liberation of benzyl amine.     

Silsesquioxane Chemistry, 4.: Silsesquioxane Complexes of Titanium(III) and Titanium(IV)

Reaction of the incompletely condensed silsesquioxane derivative Cy₇Si₇O₉(OH)₃ (1) with Ti(OEt)₄ affords the dimeric titanasilsesquioxane [(Cy₇Si₇O₁₂)Ti(μ-OEt)(EtOH)]₂ (13) in 81% yield. The known titanasilsesquioxane [Cy₇Si₇O₁₁(OSiMe₃)]₂Ti (18) has been prepared through a modified procedure starting from titanium tetraalkoxides. Novel oxotitanium silsesquioxane derivatives are obtained from reactions of titanocene dihalides with Cy₇Si₇O₉(OH)₂(OSiMe₃) (14). Cp₂TiCl₂ yields dinuclear (μ-O)[{Cy₇Si₇O₁₁(OSiMe₃)}TiCp]₂ (19), while with Cp^*₂TiCl₂ the trinuclear titanacycle Cp^*₂Ti₃O₃[Cy₇Si₇O₁₁(OSiMe₃)]₂ (20) is obtained. In addition, a new synthetic route to model compounds for titanium catalysts immobilized on silica has been developed. Disilylated Cy₇Si₇O₉(OH)(OSiMe₃)₂ (15) cleanly reacts with the ‘tucked-in’ fulvene complex Cp*Ti(C₅Me₄CH₂) to give the titanium(III) silsesquioxane Cp*₂Ti[Cy₇Si₇O₁₀(OSiMe₃)₂] (21). In a similar manner treatment of Cp*Ti(C₅Me₄CH₂) with Cy₇Si₇O₉(OH)₂(OSiMe₃) (14) affords the mono(pentamethylcyclopentadienyl) complex Cp*Ti[Cy₇Si₇O₁₁(OSiMe₃)][Cy₇Si₇O₁₀-(OH)(OSiMe₃)] (22) which is an advanced model compound for a catalytically active titanium center on a silica surface. The molecular structures of these titanium silsesquioxane derivatives have been determined by X-ray diffraction analyses.     

Synthesis and reactions of 4-vinyl pyridine derivatives of ruthenium(II)

4-Vinyl pyridine (4-Vp) reacts with RuHClCO(PPh₃)₃ (I) in THF to give RuHClCO(PPh₃)₂(4-Vp) (II, which reacts with sodium derivatives of bidentate chelating ligands to afford substitution products, [RuH(CO)(PPh₃)₂(L)]. The bindentate ligands used are 2-hydroxybenzaldehyde, 2-hydroxy-3-methoxybenzaldehyde, trifluorothenoylacetone and 8-hydroxyquinoline. Insertion reactions of the Ru---H bond of II with activated olefins such as acrylonitrile [giving RuCl(CO)(CH₃CHCN)(PPh₃)₂(4-Vp)], 2-vinyl pyridine, dimethyl fumarate and monobromodiethyl fumarate have been carried out to obtain chelated Ru---C bonded complexes. RuCl₂(PPh₃)₃ reacts with an excess of 4-Vp to give an octahedral ruthenium addition complex containing two vinyl pyridine ligands. The dimer [RuClCO(CH₃CHCN)(PPh₃)(4-Vp)]₂ is obtained by the reaction of [RuClCO(CH₃CHCN)(PPh₃)₂]₂ with an excess of 4-Vp. Stereochemical assignments have been made for these new complexes on the basis of IR and ¹H NMR data.     

Halfsandwich Transition Metal Complexes with 1,2-dichalcogenolate Carboranes

Mononuclear halfsandwich transition metal complexes (Cp*M) are useful model compounds in which one hemisphere of the coordination shell is blocked by the voluminous Cp* ring. In the protected space below the Cp* ligand, one or two 1,2-dicarba-closo-dodecarborane-1,2-dichalcogenolate ligands can be accommodated, e.q. a mono-dichalcogenolate carborane halfsandwich iridium complexes Cp*Ir(E₂C₂B₁₀H₁₀)(E=S, Se)[l] and bis-dichalcogenolate carborane rhenium or tungsten complexes Cp*Re(E₂C₂B₁₀H₁₀)₂(E=S, Se,Te),[Li(THF)₄] [Cp*W(E₂C₂B₁₀H₁₀)₂] (E=S, Se).     

Schwefel(IV)-Verbindungen als Liganden XVII. Übergangsmetall-vermittelte Insertion von Schwefeldioxid in die C---O-Einfachbindung

Methoxyethyliron complexes [Cp(CO)(L)Fe(CH₂CHROMe)] (L = CO, P(OPh)₃; R = H, Me) insert SO₂ into the C---O single bond wih formation of metalated sulphonic acid esters [Cp(CO)(L)Fe(CH₂-CHRSO₂OMe)]. the insertion is stereospecific wih retention of configuration at carbon. The complexes [Cp(CO)₃M(CH₂CHRSO₂OMe)] (M = Mo, W; R = H, Me) are obtained analogously. Oxidation of [Cp(CO)₃W(CH₂CH₂SO₂OMe)] wih iodine gives the ionic tungsten(IV) alkyl complex [Cp(CO)₃(I)W(CH₂CH₂SO ₂OMe)]⁺. Triphenylphosphine converts [Cp(CO)₃Mo(CH₂CHRSO₂OMe)] into acyl complexes [Cp(CO)₂(Ph₃P)Mo(C(O)CH₂CHRSO ₂OMe)] (R = H, Me), which upon oxidation with Ce^IV in MeOH yield the diesters MeOC(O)CH₂CHRSO₂OMe.     

钌的二甲基氯硅烷羰基化合物和衍生物的合成及表征

用SiMe₂ClH与Ru₃(CO)₁₂反应,得到顺式-Ru(CO)₄(SiMe₂Cl)₂(I)和[Ru(CO)₄(SiMe₂Cl)]₂(Ⅱ)。它们的SiMe₂Cl配位基呈现较强的反位效应,由此合成得到一系列含膦(氧磷)或含卤素的衍生物。进行了Ⅰ-Ⅵ的元素分析、IR、¹HNMR和MS表征。     

Synthesis, structure and hydrogenation catalytic activity of [Ru3(μ3,η-ampy)(μ,η:η-PhC=CHPh)(CO)6(PPh3) (Hampy = 2-amino-6-methylpyridine)

The compound [RU₃(μ₃,η²- -ampy)(μ₃η¹:η²-PhC=CHPh)(CO)₆(PPh₃)₂] (1) (ampy = 2-amino-6-methylpyridinate) has been prepared by reaction of [RU₃(η-H)(μ₃,η²- ampy) (μ,η¹:η²-PhC=CHPh)(CO)₇(PPh₃)] with triphenylphosphine at room temperature. However, the reaction of [RU₃(μ-H)(μ₃, η² -ampy)(CO)₇(PPh₃)₂] with diphenylacetylene requires a higher temperature (110°C) and does not give complex 1 but the phenyl derivative [RU₃(μ₃,η²-ampy)(μ,η ¹:η² -PhC=CHPh)(μ,-PPh₂)(Ph)(CO)₅(PPh₃)] (2). The thermolysis of complex 1 (110°C) also gives complex 2 quantitatively. Both 1 and 2 have been characterized by0 X-ray diffraction methods. Complex 1 is a catalyst precursor for the homogeneous hydrogenation of diphenylacetylene to a mixture of cis- and trans -stilbene under mild conditions (80°C, 1 atm. of H₂), although progressive deactivation of the catalytic species is observed. The dihydride [RU₃(μ-H)₂(μ ₃,η²-ampy)(μ,η¹:η²- PhC=CHPh)(CO)₅(PPh₃)₂] (3), which has been characterized spectroscopically, is an intermediate in the catalytic hydrogenation reaction.     

Dimethylaluminum and gallium amino alkoxides

An S,S′-thioether—thioester chelating ligand [7,8-μ-SCH₂C(O)S-7,8-C₂B₉H₁₀]⁻ (L₁), incorporating the unit [—(C)₂B₉H₁₀]⁻ has been synthesized. Reactions have been conducted with RhCl(PPh₃)₃ and PdCl₂(PPh₃)₂ complexes in ethanol. With Rh, L₁ maintains its original cyclic nature and most probably chelation via thioether—thioester takes place. The carborane negative charge may stabilize this original thioether—thioester complex. The other two Rh positions are occupied by two PPh₃ ancillary ligands forming [Rh(L₁)(PPh₃)₂]. The reaction of L₁ with Pd induces ligand modifications and the cyclic nature of L₁ is lost. A transesterification process leading to a dianionic ligand L₂, [7-S-8-SCH₂C(O)OCH₂CH₃−7,8-C₂B₉H₁₀]²⁻ has taken place. In this way L₂ is capable of compensating the dipositive Pd charge. The other two Pd positions are occupied by two PPh₃. This reaction has been extended to methanol and isopropanol solvents. The crystal structure of [Pd(L₂)(PPh₃)₂] has been determined.     

Structural similarities and differences among mixed-metal clusters containing a single M(PPh3) (M = Cu, Ag or Au) fragment

The heteronuclear metal clusters [H₃MRu₄(CO)₁₂(PPh₃)] and [MFe₃(μ-COMe)(CO)₁₀(PPh₃)] (M = Cu, Ag or Au) have been prepared; the gold-tetraruthenium cluster has a different metal core geometry to that adopted by the copper and silver analogues, whereas all three iron-Group IB mixed-metal clusters have the same geometry.     

Preparation and characterization of ruthenium(II), rhodium(III) and iridium(III) complexes of isocyanide bearing the azo group

Reactions of [(η⁶-arene)RuCl₂]₂ (1) (η⁶-arene=p-cymene (1a), 1,3,5-Me₃C₆H₃ (1b), 1,2,3-Me₃C₆H₃ (1c) 1,2,3,4-Me₄C₆H₂(1d), 1,2,3,5-Me₄C₆H₂ (1e) and C₆Me₆ (1f)) or [Cp*MCl₂]₂ (M=Rh (2), Ir (3); Cp*=C₅Me₅) with 4-isocyanoazobenzene (RNC) and 4,4′-diisocyanoazobenzene (CN–R–NC) gave mononuclear and dinuclear complexes, [(η⁶-arene)Ru(CNC₆H₄N=NC₆H₅)Cl₂] (4a–f), [Cp*M(CNC₆H₄N=NC₆H₅)Cl₂] (5: M=Rh; 6: M=Ir)_, [{(η⁶-arene)RuCl₂}₂{μ-CNC₆H₄N=NC₆H₄NC}] (8a–f) and [(Cp*MCl₂)₂(μ-CNC₆H₄N=NC₆H₄NC)}] (9: M=Rh; 10: M=Ir)_, respectively. It was confirmed by X-ray analyses of 4a and 5 that these complexes have trans-forms for the ---N=N--- moieties. Reaction of [Cp*Rh(dppf)(MeCN)](PF₆)₂ (dppf=1,1′-bis (diphenylphosphino)ferrocene) with 4-isocyanoazobenzene gave [Cp*Rh(dppf)(CNC₆H₄N=NC₆H₅)](PF₆)₂ (7), confirmed by X-ray analysis. Complex 8b reacted with Ag(CF₃SO₃), giving a rectangular tetranuclear complex 11b, [{(η⁶-1,3,5-Me₃C₆H₃)Ru(μ-Cl}₄(μ-CNC₆H₄N=NC₆H₄NC)₂](CF₃SO₃)₄ bridged by four Cl atoms and two μ-diisocyanoazobenzene ligands. Photochemical reactions of the ruthenium complexes (4 and 8) led to the decomposition of the complexes, whereas those of 5, 7, 9 and 10 underwent a trans-to-cis isomerization. In the electrochemical reactions the reductive waves about −1.50 V for 4 and −1.44 V for 8 are due to the reduction of azo group, [---N=N---]→[---N=N---]²⁻. The irreversible oxidative waves at ca. 0.87 V for the 4 and at ca. 0.85 V for 8 came from the oxidation of Ru(II)→Ru(III).     

The reactivity of [ReBr3(MeCN)(dppe)] towards gaseous nitric oxide. The X-ray structure of [ReBr3(MeCN)(dppe)] and [ReBr3(NO)(dppe)]0.57[ReOBr3(dppe)]0.43 and DFT calculations for [ReBr3(NO)(dppe)] and [ReOBr3(dppe)]

The [ReOBr₃(dppe)] (dppe=bis(diphenylophosphino)ethane) complex reacts with acetonitrile in the presence of excess of triphenylphpsphine to give a new monomeric nitrile rhenium(III) complex—[ReBr₃(MeCN)(dppe)] (1). The reaction of 1 with gaseous nitric oxide leads to the mixed [ReBr₃(NO)(dppe)]_0.57[ReOBr₃(dppe)]_0.43 complex (2) with rhenium atoms on +2 and +5 oxidation states. This paper presents the synthesis, spectroscopic characterisation and X-ray structure of 1 and 2. The geometries of [ReBr₃(NO)(dppe)] and [ReOBr₃(dppe)] have been optimized using the density functional theory (DFT) and the electronic transitions of [ReBr₃(NO)(dppe)] and [ReOBr₃(dppe)] have been calculated with the time-dependent DFT method (TDDFT). The UV–vis spectrum of 2 has been interpreted on the basis of the experimental data for [ReOBr₃(dppe)] and the calculated transitions for [ReOBr₃(dppe)] and [Re(NO)Br₃(dppe)].     

Preparation, structures and some reactions of novel diynyl complexes of iron and ruthenium

Reactions between HC triple bond CC triple bond CSiMe3 and several ruthenium halide precursors have given the complexes Ru(C triple bond CC triple bond CSiMe3)(L2)Cp'[Cp'= Cp, L = CO (1), PPh3 (2); Cp' = Cp*, L2= dppe (3)]. Proto-desilylation of 2 and 3 have given unsubstituted buta-1,3-diyn-1-yl complexes Ru(C triple bond CC triple bond CH)(L2)Cp'[Cp'= Cp, L = PPh3 (5); Cp'= Cp*, L2 = dppe (6)]. Replacement of H in 5 or 6 with Au(PR3) groups was achieved in reactions with AuCl(PR3) in the presence of KN(SiMe3)2 to give Ru(C triple bond CC triple bond CAu(PR3)](L2)Cp'[Cp' = Cp, L = PPh3, R = Ph (7); Cp' = Cp*, L2= dppe, R = Ph (8), tol (9)]. The asymmetrically end-capped [Cp(Ph3P)2Ru]C triple bond CC triple bond C[Ru(dppe)Cp*] (10) was obtained from Ru(C triple bond CC triple bond CH)(dppe)Cp* and RuCl(PPh3)2Cp. Single-crystal X-ray structural determinations of and are reported, with a comparative determination of the structure of Fe(C triple bond CC triple bond CSiMe3)(dppe)Cp* (4), and those of a fifth polymorph of [Ru(PPh3)2Cp]2(mu-C triple bond CC triple bond C) (12), and [Ru(dppe)Cp]2(mu-C triple bond CC triple bond C) (13).     

Synthesis, characterisation and reactivity of trans-[Ru(L)(PPh3)Br2]; L=2-pyridyl-N-(2′-methylthiophenyl)methyleneimine: Crystal structure of trans-[Ru(L)(PPh3)Br2]

Reaction of Ru(PPh₃)₂Br₂ with the NNS chelating tridentate ligand 2-pyridyl-N-(2′-methylthiophenyl)methyleneimine (L) led to the isolation of the ruthenium(II) complex [Ru(L)(PPh₃)Br₂]. Reactivity of this complex with different bidentate chelating ligands revealed that the products are quite different from those obtained by reacting Ru(L)(PPh₃)Cl₂ (the corresponding cis dichloro complex) with the same ligands under comparable conditions. The mixed chelates were isolated and characterised by elemental analysis, magnetic moment measurement and by different spectroscopic methods along with their precursor. Electrochemistry of the complexes was examined by cyclic voltammetry using a platinum working electrode and a Ag/AgCl electrode as reference. The crystal structure of [Ru(L)(PPh₃)Br₂] disclosed that, unlike Ru(L)(PPh₃)Cl₂, the two bromo ligands are in trans position and this explained the difference in its reactivity pattern from the corresponding chloro complex.