两个基于羧基-水分子链构筑的超分子镉配合物的合成、晶体结构和荧光性质（英文）

以5-甲基-3-吡唑甲酸(H2MPCA)为主配体,在螯合配体菲咯琳(phen)或2,2′-联吡啶(2,2′-bpy)的存在条件下,与醋酸镉在常温下反应得到2个基于氢键构筑的羧基-水分子链的超分子化合物,[Cd(HMPCA)2(2,2′-bpy)]·2H2O(1)和[Cd(HMPCA)2(phen)]·2.5H2O(2),并通过元素分析、红外光谱、热重分析、X-射线衍射等对其结构进行了表征。结构分析表明,在化合物1和2中,单核镉的配合物和游离水分子通过氢键及π…π堆积作用形成了三维超分子结构,在此过程中,游离水和羧基构筑的链状水分子簇起着非常重要的作用。此外,我们还研究了化合物1和2的热重和荧光性质。     

两个基于羧基-水分子链构筑的超分子镉配合物的合成、晶体结构和荧光性质

以5甲基-3-吡唑甲酸(H₂MPCA)为主配体,在螯合配体菲咯啉(phen)或2,2'-联吡啶(2,2'-bpy)的存在条件下,与醋酸镉在常温下反应得到2个基于氢键构筑的羧基-水分子链的超分子化合物,[Cd(HMPCA)₂(2,2'-bpy)]·2H₂O(1)和[Cd(HMPCA)₂(phen)]·2.5H₂O(2),并通过元素分析、红外光谱、热重分析、X-射线衍射等对其结构进行了表征.结构分析表明,在化合物1和2中,单核镉的配合物和游离水分子通过氢键及π…π堆积作用形成了三维超分子结构,在此过程中,游离水和羧基构筑的链状水分子簇起着非常重要的作用.此外,我们还研究了化合物1和2的热重和荧光性质.     

5-甲基-3-吡唑甲酸构筑的两个锰(Ⅱ)/镍(Ⅱ)配合物的合成、结构、电化学及荧光性质（英文）

将5-甲基-3-吡唑甲酸(H2MPCA)与Mn.或Ni.金属盐反应合成了2个新的配合物:[Mn(HMPCA)_2(H_2O)_2](1)和[Ni(HMPCA)_2(2,2′-bpy)]·2H_2O (2)(2,2′-bpy=2,2′-联吡啶)。在单核配合物1和2中,每个金属离子均为八面体配位构型,其中HMPCA-配体均采取的是N,O-螯合的配位模式。在配合物1中的分子间氢键N—H…O和O—H…O作用下,[Mn(HMPCA)_2(H_2O)_2]配位单元堆积成含有1D纳米管道的3D超分子结构。在2中,[Ni(HMPCA)_2(2,2′-bpy)]单元和结晶水分子之间在分子间氢键作用下,形成了1D链状结构,相邻的链之间通过分子间的π…π作用形成了3D超分子结构。还考察了配合物1和2的电化学性质和荧光性能。     

[Ag(4，4′-bpy)]+及[Zn(phen)2(H2O)2]2+两种配合物的合成、结构与荧光性质

用水热法和溶液法分别合成了2个新的配合物{[Ag(4,4′-bpy)]·3-HSBA.H2O}n(1)和[Zn(phen)2(H2O)2]·(A-2,5-DSA)·3H2O(2)(3-HSBA=3-羧基苯磺酸根,A-2,5-DSA=苯氨-2,5-二磺酸根,4,4′-bpy=4,4′-联吡啶,phen=1,10-邻菲咯啉),用X-射线单晶衍射结构分析方法测定了其晶体结构。配合物1是一维链状结构。在1个不对称单元中包含1个[Ag(4,4′-bpy)]+阳离子,1个3-羧基苯磺酸根阴离子和1个晶格水分子。Ag髣离子与2个4,4′-联吡啶的2个氮原子配位。配合物2是单核结构。在1个不对称单元中包含1个[Zn(phen)2(H2O)2]2+阳离子,1个苯氨-2,5-二磺酸根阴离子和3个晶格水分子。Zn髤离子与2个1,10-邻菲咯啉的4个氮原子和2个水氧原子配位。配合物1和2中,配位阳离子、抗衡阴离子以及晶格水分子之间存在丰富的氢键,进而构筑成超分子网络结构。配合物的荧光均来自于配体的π-π*电子跃迁。     

[Ag(4,4′-bpy)]~+及[Zn(phen)_2(H_2O)_2]~(2+)两种配合物的合成、结构与荧光性质

用水热法和溶液法分别合成了2个新的配合物{[Ag(4,4′-bpy)]·3-HSBA.H2O}n(1)和[Zn(phen)2(H2O)2]·(A-2,5-DSA)·3H2O(2)(3-HSBA=3-羧基苯磺酸根,A-2,5-DSA=苯氨-2,5-二磺酸根,4,4′-bpy=4,4′-联吡啶,phen=1,10-邻菲咯啉),用X-射线单晶衍射结构分析方法测定了其晶体结构。配合物1是一维链状结构。在1个不对称单元中包含1个[Ag(4,4′-bpy)]+阳离子,1个3-羧基苯磺酸根阴离子和1个晶格水分子。Ag髣离子与2个4,4′-联吡啶的2个氮原子配位。配合物2是单核结构。在1个不对称单元中包含1个[Zn(phen)2(H2O)2]2+阳离子,1个苯氨-2,5-二磺酸根阴离子和3个晶格水分子。Zn髤离子与2个1,10-邻菲咯啉的4个氮原子和2个水氧原子配位。配合物1和2中,配位阳离子、抗衡阴离子以及晶格水分子之间存在丰富的氢键,进而构筑成超分子网络结构。配合物的荧光均来自于配体的π-π*电子跃迁。     

含有5-甲基-3-吡唑甲酸的铅(Ⅱ)配合物:合成、结构和荧光性质

在不同含N辅助配体的存在下,将5-甲基-3-吡唑甲酸(H_2MPCA)与相应的铅(Ⅱ)盐反应制得了2个新的配合物:[Pb(HMPCA)_2(H_2O)_2]·H_2O (1)和[Pb(HMPCA)_2(phen)]·H_2O (2)(phen=菲咯啉)。双核配合物1中双核[Pb(μ_2-HMPCA)]_2单元在一对Pb…O次级键的作用下形成了一维链状结构,这些一维链在氢键的作用下进一步自组装成2D超分子结构。而单核化合物2在Pb…O次级键的作用下形成了Pb_2O_2平面,它们在π…π和氢键作用下堆积形成3D超分子结构。考察了配合物1和2的热稳定性、荧光性能。     

苯并咪唑-5,6-二羧酸Mn(Ⅱ)和Cd(Ⅱ)混配配合物的合成、结构及性质（英文）

在水热条件下,合成了2个配位聚合物{[Mn(Hbidc)(2,2′-bpy)(H_2O)_2]·1.5H_2O}n(1)和{[Cd(Hbidc)(phen)][Cd(phen)_2Cl_2]}n(2)(H_3bidc=苯并咪唑-5,6-二羧酸,2,2′-bpy=2,2′-联吡啶,phen=菲咯啉),并通过X射线单晶衍射、红外、元素分析、X射线粉末衍射和热重对配合物结构进行了表征。配合物1是一维无限zig-zag链结构,可以通过O-H…O和N-H…O氢键的相互作用形成三维超分子结构。配合物2也是一维无限链结构。此外,测试了配合物1和2的固体紫外吸收光谱和研究了配合物2的固体荧光性能。     

三维混配型三核镉(Ⅱ)配合物的合成及荧光性质

水热合成法合成了新颖的三核超分子配合物[Cd3(PDA)3(2,2′-bipy)3(H2O)2].2H2O(1)(H2PDA=pyridine-2,6-dicarboxylic acid),并进行了元素分析、红外、热重、荧光及单晶衍射测试。该化合物属单斜晶系,P21/n空间群,晶胞参数分别为:a=2.12281(14)nm,b=1.006 09(7)nm,c=2.830 64(19)nm,β=108.937 0(10)°。中心原子配位数为7,羧基以双齿形式将Cd1、Cd2、Cd3桥联组成三核配合物。分子间氢键与π-π堆积构筑成三维超分子结构。荧光分析表明该配合物在室温下发出强烈的蓝色荧光,具有潜在的应用价值。     

两种N-2-嘧啶基-4-氨基苯磺酰Co(Ⅱ)配合物的合成、晶体结构及电催化性能研究(英文)

水热法合成两种新的Co(Ⅱ)化合物[Co(SD)2(2,2′-bpy)](1)和{[Co(SD)2(4,4′-bpy)]·4H2O}n(2)(SD=N-2-嘧啶基-4-氨基苯磺酰,2,2′-bpy=2,2′-联吡啶,4,4′-bpy=4,4′-联吡啶),并通过元素分析、红外光谱、X射线粉末衍射、热重分析、循环伏安法进行结构和性能表征。单晶X-ray衍射分析表明化合物1是三斜晶系,空间群为P1;化合物2是单斜晶系,空间群为C2/c。电催化实验发现化合物1和2对H2O2、HCHO都具有良好的电催化活性。     

四个Cd(Ⅱ)配位聚合物:辅助配体对晶体结构以及荧光性能的影响

采用溶剂热的方法,将配位模式丰富的多羧酸有机配体5-(2-硝基-4-羧基苯氧基)-间苯二甲酸(H3ncpoi)与Cd~(2+)离子以及不同的辅助配体原位组装而成4个新的配位聚合物晶体:[Cd(Hncpoi)(2,2′-bpy)(H2O)]n(1),{[Cd2(Hncpoi)2(bpyp)(H2O)4]·3H2O}n(2),{[Cd2(Hncpoi)2(azpy)(H2O)2]·2H2O}n(3),{[Cd2(Hncpoi)2(dpe)(H2O)2]·2H2O}n(4),其中H3ncpoi为5-(2-硝基-4-羧基苯氧基)-间苯二甲酸,2,2′-bpy为2,2′-联吡啶,bpyp为1,4-二-吡啶基-4-亚甲基-哌嗪,azpy为4,4′-偶氮吡啶,dpe为1,2-二-(4-吡啶基)乙烯。对4个配合物进行了X射线单晶衍射、粉末衍射,元素分析、热重、荧光光谱等表征。X射线单晶结构分析表明,配合物1,2具有一维链状结构,而配合物3,4则具有二维(4,4)格子层状结构,一维链和二维层之间通过分子间作用力连接成三维超分子结构。进一步研究表明,辅助配体的构型、配位方式等对晶体结构具有决定性作用。与此同时,对几个配合物的荧光光谱进行分析,发现不同的辅助配体对配合物的荧光性能有着显著的影响。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.