固态后缩聚方法合成高分子量的含磷热致性液晶共聚酯

为了获得较高分子量的具有高阻燃性的热致性液晶高分子,通过固态聚合方法合成了一种基于对羟基苯甲酸、对苯二甲酸、乙二醇和含磷菲环取代二酚的高热稳定性、较低相转变温度和宽的液晶相转变温度范围的含磷液晶共聚酯(BDQTEP),并对该含磷液晶共聚酯预聚物(pre-BDQTE)在不同固态聚合条件下获得的聚合物热性能和液晶性进行了研究.对其固态反应速率控制进行了初步的探讨,当反应温度为235℃时,固态聚合反应较为理想.在聚合的初始阶段,共聚酯特性黏数[η]、黏流温度Tf和羧基浓度[COOH]均随聚合时间而明显变化,但在6 h后变化较小,几乎不变.通过固态后缩聚,将熔融聚合获得的特性黏数[η]=0.44 dL/g的含磷液晶共聚酯BDQTE的特性黏数提高了近两倍.     

芳香─脂肪族共聚酰胺的序列结构和溶致液晶性能

本文利用对苯二甲酰氯（ＴＰＣ），对苯二胺（ＰＰＤ）和亚甲基数为２和６的两种脂肪族二元胺（ＡＤＡ）合成了具有不同序列结构的芳香一脂肪族共聚酰胺．研究了共聚酰胺的序列结构参数──无规度Ｂ和数均序列长度Ｌｎ与液晶临界浓度Ｃ＊和中介相的类型之间的关系．     

PET/HBA/TA/HQ四元共聚酯形态及相结构的研究

研制了一套蚀刻方法并对聚对苯二甲酸乙二醇酯/对羟基苯甲酸/对苯二甲酸/对苯二酚(PET/HBA/TA/HQ)体系的共聚酯液晶试样断面进行蚀刻,并用扫描电镜观察,发现此类共聚酯中存在两相结构.当PET摩尔分数小于50％时,分散相呈球状且富含PET,连续相富含全芳族链段;当PET摩尔分数等于或大于50％时,分散相和连续相结构发生颠倒,连续相富含PET,分散相球状粒子富含全芳族链段且为纤维状结构.因此可以断言,用熔融缩聚方法制备的PET/HBA/TA/HQ四元共聚酯不是无规共聚物,而是嵌段共聚物.     

芳香─脂肪族共聚酰胺的序列结构和溶致液晶性能

本文利用对苯二甲酰氯（ＴＰＣ），对苯二胺（ＰＰＤ）和亚甲基数为２和６的两种脂肪族二无胺（ＡＤＡ）合成了具有不同序列结构的芳香－脂肪族共聚酰胺。研究了共了聚酰胺的序列结构参数－无规度Ｂ和数均序列长度Ｌｎ与液晶临界浓度Ｃ＊和中介相的类型之间的关系。     

一种基于联苯二甲酸为介晶基元的含磷液晶共聚酯的合成与表征

以联苯二甲酸二甲酯、二甘醇和9,10-二氢-9-氧杂-10磷酰杂菲-对苯二酚二羟乙基醚(DOPO-HQ-HE)为单体,通过无规共聚合成了一种新型含磷液晶共聚酯(PDEBP).用1H-NMR对共聚酯的结构进行了表征,用TGA、DSC和POM对其热性能及液晶行为进行了研究.结果表明,阻燃单体DOPO-HQ-HE的引入不会降低共聚酯的热稳定性,含7.5 mol％ DOPO-HQ-HE的共聚酯PDEBP7.5在700℃的氮气氛中的残余物(Wt700R)可达31.9 wt％,并且具有很好的阻燃性.DOPO-HQ-HE含量的增加对共聚酯的结晶性有较大的破坏,5 mol％ DOPO-HQ-HE的共聚酯PDEBP5的清亮点温度为154.2℃,焓变为4.64 J/g,而PDEBP7.5在POM测试中在升温及降温过程中均难观察到液晶相的双折射现象.     

聚对苯二甲酸乙二酯(PET)/聚对乙酰氧基甲酸(PHB)共聚酯及同类共聚物序列分布表征的数学统计

由聚对苯二甲酸乙二酯(PET)和对-乙酰氧基苯甲酸制得的PET/PHB共聚酯代表了一类序列结构较一般二元共聚物复杂的共聚体系.在揭示了这类共聚物与序列分布有关的诸概率参数中只有一个是独立的之后,定义了参数B_q来描述此类共聚物的无规度.并指出,共聚物B_q=b时的序列分布,可以从一般二元共聚物无规度B=b时的序列结构加以推断.     

热致性液晶嵌段共聚酯的合成及表征

以对羟基苯甲酸甲酯和乙二醇为原料，通过熔融酯交换反应合成中间体（Ⅰ）：双（对一羟基苯甲酸）乙二醇酯．用溶液缩合法合成了三种不同嵌段长度的液晶嵌段共聚酯（Ｐ２４７、Ｐ２７７、Ｐ２７４）作为液晶聚合物与热塑性聚合物的“增容剂”．ＦＴＩＲ，Ｈ ＮＭＲ分析表明，嵌段共聚酯的结构和组成与分子设计基本相符；偏光显微镜证实，嵌段共聚酯在一定温度范围内为热致性向列型液晶，在较低温度为均相，在较高温度为两相结构．     

全芳香族共聚酯的结构和其液晶行为研究

本文对不同组成的对苯二甲酸(TPA),对羟基苯甲酸(PHBA),联苯二酚(BP),间苯二甲酸(IPA)共聚酯采用热台偏光显微镜、电子显微镜、X-射线衍射、激光小角散射、差热等技术进行了研究.实验结果表明,在一定的组成范围内共聚酯熔体有很好的液晶性.重点讨论了分子组成、转变行为、液晶性的关系,并对液晶相的形态结构进行了表征.     

用~1H-和~(13)C-NMR方法研究聚对苯二甲酸乙二酯/聚一氧基苯甲酸酯共聚酯的序列分布

测定了PET/30PHB和PET/60PHB共聚酯的高分辨~1H和~(13)C谱,并采用INEPT方法和部分弛豫FT技术确定了季碳吸收峰,对NMR谱进行了归属.应用我们先前提出的方法对共聚酯的序列分布进行了表征.结果表明,两种共聚酯的无规度B_q值均小于1,序列分布不象Jackson等认为的那样为完全无规的.此外,文中还指出,某些研究者套用Flory公式判别PET/PHB共聚酯是否为无规的不妥之处.     

1,8-辛二酸改性热致液晶共聚酯的制备及其性能

以对羟基苯甲酸、对苯二甲酸和对苯二酚为共聚单体，经乙酰化和熔融缩聚两步法合成三元热致液晶共聚酯。引入长链脂肪族化合物1,8-辛二酸作为改性单体，按不同比例代替对苯二甲酸，制备了一系列含柔性链段的新型四元热致液晶共聚酯。通过傅里叶红外光谱(FT-IR)和核磁共振碳谱(¹³C-NMR)对共聚酯结构进行表征，采用差示扫描量热(DSC)和热失重分析(TGA)表征其热性能，采用偏光显微镜(POM)和X射线衍射(XRD)分析其液晶性能。研究表明，三元液晶共聚酯熔点达407℃，热稳定性优异。随着1,8-辛二酸含量增加，四元共聚酯熔点显著降至214℃，热稳定性较好，最大热分解温度达到428℃。该系列共聚酯显示了典型的向列型液晶织态结构。1,8-辛二酸的引入显著改善了液晶共聚酯的可加工性。     

甲壳型液晶高分子的化学结构及其与性能间关系的研究

设计并合成了7种新型甲壳型液晶高分子,研究了液晶基元的化学结构和立体效应对单体及其聚合物液晶性的影响.发现在液晶基元的末端引入极性或可极化的原子基团提高了单体的熔点和液晶相的热稳定性;液晶基元的长径比越大,单体的熔点和清亮点越高;聚合使单体的液晶稳定性增加、液晶相温度范围变宽;侧链液晶基元的极性、刚性和空阻越大,聚合物的玻璃化温度越高;酰胺基团无论是在分子的末端还是在连接部位,都使单体的熔点和聚合物的玻璃化温度提高,但在分子末端时液晶相较稳定,作为中心桥键时不利于液晶相的稳定形成.     

SYNTHESIS AND CHARACTERIZATION OF AROMATIC LIQUID CRYSTALLINE COPOLYESTERS WITH REGULAR SEQUENCE STRUCTURE

Several novel aromatic liquid crystalline copolyesters with regular sequence structure were prepared by melt Sehotten-Baumann polycondensation via complex monomer. Polarizing microscope with hot stage, thermal analysis and X-ray diffraction were used to investigate the structure and properties of the copolyesters. The effects of structural units, such as flexible spacer, noncolinear meta-linked phenylene unit, crankshaft unit, kink with flexible bridging unit and various substituted benzene rings on melting temperature of aromatic copolyesters were studied and discussed on the basis of crystalline structure of the polymers.     

Thermotropic liquid crystalline polymers with low thermal transitions. II. Low melting thermotropic liquid crystalline homo- and co-polyesters

Thermotropic liquid crystalline (TLC) polymers with low melt transitions are useful for imaging technologies. This is the first report describing thermotropic liquid crystalline copolyesters of low melt transitions comprised of a mesogen with up to three different spacer moieties. We have noted that the smectic mesophase range decreased with increasing amounts of different spacer moieties, without altering the isotropic transition and thereby leading to a broader nematic range. © 1995 John Wiley & Sons, Inc.     

PROPERTIES AND MICROSTRUCTURE OF AROMATIC LIQUID CRYSTALLINE COPOLYESTERS

The properties and structures of thermotropical liquid crystalline copolyesters basedon p-hydroxybenzoic acid (PHBA), terephthalic acid (TPA) and bisphenol A (BPA) werestudied by DSC, WAXD, hot stage polarized microscopy and NMR. It was found that mostof the copolyesters were soluble in many common organic solvents. The copolyesters hadfow T_m/T_f values and a broad range of liquid crystal phase, making the polymers readilymelt-processable. The effects of annealing at different temperatures on the copolyestercontaining 33% PHBA were also discussed. It was noted that annealing at ca. 200℃(below Tc - n) could lead to the increasing of the crystallinity of the copolyester while themicrostructure and sequence structure had not changed. Annealing at ca.280℃ (nearTc - n) could bring a change of crystal and sequence structure and simultaneously madethe ndcrodomains be ordered more perfectly.     

含二羟基二苯酮系列热致液晶共聚酯的合成与表征──Ⅱ．含4，4＇－二羟基二苯酮，对苯二甲酸，对羟基苯甲酸，间苯二酚的共聚酯

采用直接熔融缩聚及固相聚合方法由４，４’－二羟基二苯酮（ＢＨＰ），对苯二甲酸（ＴＰ），对羟基苯甲酸（ＰＨＢＡ），间苯二酚（ＲＥＳ）成功地合成了四元共聚酯高分子，该聚酯的组成结构及性质由偏光显微镜、广角Ｘ－射线衍射、ＤＳＣ等手段进行表征，结果表明共聚酯具有向列型液晶特征．     

Thermotropic copolyesters of a series of aromatic diols with phenylterephthalic acid and 4,4′-oxybisbenzoic acid

Wholly aromatic, liquid crystalline, main chain copolyesters derived from various linearly substituted aromatic diols with mixtures of 2-phenylterephthalic acid and a nonlinear aromatic dicarboxylic acid, 4,4′-oxybisbenzoic acid, were prepared by acidolysis condensation polymerization reactions and characterized for their liquid crystalline properties. The formation of a liquid crystalline phase at elevated temperatures was not prevented by the introduction of up to 50 mol % of the nonlinear diacid in the copolymers, and all of those copolyesters exhibited nematic liquid crystalline phases. Furthermore, the inclusion of a nonlinear monomer was not as effective as was the presence of a phenyl substituent in decreasing the melting transition of these copolymers. All of the copolymers had high glass transition temperatures and high thermal stabilities. © 1993 John Wiley & Sons, Inc.     

热致液晶聚酯（对羟基苯甲酸—对苯二甲酸双酚A酯）的聚合研究

本文以对乙酰氧基苯甲酸(pHB)、4,4′—二乙酰氧基二苯基丙烷(BPA)、对苯二甲酸(TPA)为单体,研究了制备液品共聚酯的熔融缩聚反应历程。通过用NaOH标准溶液滴定缩聚反应过程中析出的醋酸来间接地测定反应程度,讨论了无外加催化剂条件下合成液晶共聚酯的反应动力学。最后,对共聚合过程中的相态变化进行了观察。     

EFFECT OF SEQUENCE STRUCTURE ON THE THERMOTROPIC LIQUID CRYSTALLINE PROPERTIES OF POLYESTERAMIDES BASED ON DIMETHYLBENZIDINE, BISPHENOL-A AND ρ-TEREPHTHALYL CHLORIDE*

A series of thermotropic liquid crystalline polyesteramides with differ-ent sequence structure based on dimethylbenzidine (DMBD), bisphenol-A(BPA) and p-terephthalyl chloride (TPC) was synthesized by changing the feeding order of monomers inlow temperature solution polycondensation system. By means of NMR and a computer pro-gram the sequence structure parameters were measured. The effect of sequence structureon liquid crystalline phase transition temperature of PEAs obtained was investigated.     

Lightly crosslinked,mesomorphic networks obtained through the reaction of dimeric,liquid‐crystalline epoxy–imine monomers and heptanedioic acid

We reacted various dimeric, liquid‐crystalline epoxy–imine monomers, differing in the length of the central aliphatic spacer or the dipolar moments, with heptanedioic acid. The resulting systems showed a liquid‐crystalline phase in some cases, depending on the dimer and on the reaction conditions. The systems were characterized with respect to their mesomorphic properties and then were submitted to dynamic mechanical thermal analysis in both fixed‐frequency and frequency‐sweep modes in the shear sandwich configuration. The arrangement in the liquid‐crystalline phase seemed to be mainly affected both by the polarization of the mesogen and by the reaction temperature, which favored the liquid‐crystalline arrangement when it was lying in the range of stability of the dimer mesophase. In agreement with other recent literature data, dynamic mechanical thermal analysis results suggested that the presence of the mesogen directly incorporated into the main chain increased the lifetimes of the elastic modes both in the isotropic phase and in the liquid‐crystalline phase with respect to side‐chain liquid‐crystalline elastomers and that the time–temperature superposition principle did not hold through the liquid‐crystalline‐to‐isotropic transition. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44:6270–6286, 2006     

SYNTHESIS OF A GROUP OF MESOGEN JACKETED LIQUID CRYSTAL POLYMERS

A group of the mesogen jacketed liquid crystal polymers based on the monomers 2,5-bis (4-substituted benzoyl)oxystyrenes are synthesized. The substituents include alkoxy, alkyl, and cyano groups. The synthesis and the primary characterization of the liquid crystal phase of the monomers and the polymers are described. While some of the monomers give smectic textures the polymers are found to be nematic above their melting or glass transition temperatures. Interestingly the unsubstituted monomer and its polymer poly 2,5-di( benzoyloxy ) styrene are also liquid crystalline. The single crystal structure of one of the monomers is also discussed.