微米级MEL分子筛聚集体的制备

使用四丁基氢氧化铵-正硅酸四乙酯-水（TBAOH-TEOS-H₂O）简单体系一步水热制备了具有多级孔道的微米级MEL结构分子筛聚集体. 得到的silicalite-2 微米球直径大于10 μm且具有高达460 m²·g^-1的比表面积和0.74 cm³·g^-1的孔体积. 微米球的生成一定程度上解决了催化应用过程中催化剂的分离和回收问题. 同时,水热晶化过程中由纳米粒子自组装而成的晶间介孔缩短了反应物分子的扩散路径,保持了分子筛纳米晶粒的优势. 此外,钛活性位的引入并未明显影响MEL微米球的形貌和结构,含钛的MEL微米球TS（钛硅分子筛）-2在苯酚羟基化反应中具有与纳米尺寸TS-1（100-200 nm）相当的催化活性,且TS-2 可以通过简单过滤得到,简化了纳米级TS-1的分离和回收过程.     

过渡金属改性的Pd/TS-1催化氢、氧直接合成H_2O_2的性能

利用等体积浸渍法制备了M-Pd/TS-1(M=Ce,La,Pt,Fe,Co,Ni,Cr,Mn,Zn,Cd,Cu)系列催化剂,并将制得的催化剂用于常压下氢、氧直接合成过氧化氢的反应。考察了M的类型及负载量对M-Pd/TS-1催化剂催化性能的影响。结果表明,M选Ce时,催化剂的性能最好。Ce的最佳掺入量,n_(Ce)/(n_(Ce)+n_(Pd))=0.5%。对Ce改性与未改性的催化剂进行了TEM及静态化学吸附分析,结果表明,掺入Ce可使Pd在TS-1分子筛表面的粒度及分散度得到改善。考察了n_(O_2)/n_(H_2)比,气体流量,反应时间等反应条件对H_2转化率、H_2O_2选择性及收率的影响。在相对优化的工艺条件下,即n_(O_2)/n_(H_2)=3,气体流量为25 mL·min~(-1),反应时间为3 h时,H_2O_2,的收率可达到25.7%,TOF值为18.7 mol·mol~(-1)·h~(-1),此时溶液中H_2O_2的质量百分数为0.8%。     

固定床反应器上挤条小晶粒TS-1催化丙烯环氧化反应

采用纳米TS-1母液作为晶种, 在四丙基溴化铵(TPABr)-乙胺廉价水热体系中, 合成出晶粒尺寸为600 nm×400 nm×250 nm的小晶粒钛硅分子筛(TS-1), 用挤条法将其成型, 得到的挤条小晶粒TS-1被用于催化固定床反应器中的丙烯环氧化反应. 采用X射线衍射(XRD)光谱, 傅里叶变换红外(FT-IR)光谱, 紫外-可见(UV-Vis)漫反射光谱及氮气物理吸附对挤条成型的小晶粒TS-1进行表征, 并对丙烯环氧化的最优反应条件进行考察. 其中所考察的条件包括: 反应温度, 压力, 丙烯/H₂O₂摩尔比(n(C₃H₆)/n(H₂O₂)), 丙烯、甲醇及H₂O₂的质量空速(WHSV), 以及NH₃·H₂O浓度. 在所考察的范围内, 温度对环氧丙烷(PO)收率的影响较小, 当反应压力为2.0 MPa, n(C₃H₆)/n(H₂O₂)为4时, 可以得到最高的PO收率. 当丙烯、甲醇及H₂O₂的空速分别为0.93、2.5及0.25 h^-1时, PO在产物中的含量最高. 较低的NH₃·H₂O浓度对高PO收率更有利. 在优化的反应条件下, 对比不同晶粒大小TS-1的催化性能, 并考察了挤条小晶粒TS-1的长期运转性能, 连续反应1000 h, H₂O₂转化率及PO选择性仍能维持在95%以上.     

金属对钛硅分子筛TS-1催化丁二烯环氧化性能的影响

制备了不同金属改性的钛硅分子筛样品M-TS-1 (M = V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd, La, 负载量为1%), 并研究了其催化丁二烯环氧化反应的性能. 结果表明, V, Cr, Mn的加入导致H₂O₂无效分解, 因而在丁二烯环氧化反应中表现出较高的H₂O₂转化率和较低有效利用率; Fe, Co, Ni以及稀土金属La均在一定程度上促进了TS-1对H₂O₂的有效利用; Cu, Zn抑制了H₂O₂的转化, 使得H₂O₂转化率和有效利用率都较低; Cd有效提高了TS-1的催化活性, H₂O₂转化率和有效利用率均接近100%. 采用X射线衍射、N₂吸附-脱附、X射线光电子能谱、傅里叶变换红外光谱等手段表征了上述各金属的改性对TS-1骨架结构以及Ti活性中心周围电子环境的影响. 结果表明, 各M-TS-1样品的骨架结构都仍保持原有的MFI构型, 但是TS-1中Ti活性中心周围的电子环境受到来自各种金属的不同程度影响, 关联催化活性时没有特定的规律性.     

Extensions in the synthesis and catalytic application of titanium silicalite-1

Titanium silicalite-1 (TS-1) was prepared by microwave heating of a SiO₂–TiO₂ xerogel, which was dry-impregnated with tetrapropylammonium hydroxide (TPAOH). Highly crystalline product was obtained, with the yields higher than 90%, within 30 min after microwave irradiation. These are significant advantages over the conventional oven heating using alkoxide precursors in liquid phase, which requires 1-2 day crystallization time with low product yields. Sub-micron sized SiO₂–TiO₂ prepared by thermal plasma process and Ti-containing mesoporous silica, Ti-HMS, were also tested as the solid phase precursor for TS-1. These were found inferior as precursor due to difficulties in uniformly wetting the surface with TPAOH. It was possible to prepare TS-1 using diethoxysiloxane-ethyltitanate (DESET, 93.75 mol Si:6.25 mol Ti) as a single mixed alkoxide precursor, but titanium species in the sample were highly unstable and large fraction of them came out from the framework to form TiO₂ clusters upon calcination. In addition, TS-1 monolith was prepared utilizing polyurethane foam as an infiltration medium of the synthesis gel. The prepared TS-1 monolith exhibited properties similar to those of TS-1 powders, but the elementary unit of the former was made of 1–2 micron-sized hexagonal shaped crystals, causing diffusion problems. Catalytic activities of all the prepared catalysts were evaluated using 1-hexene epoxidation as a probe reaction, and 2,5-dihydrofuran epoxidation was also examined using TS-1 as an alternative process to make 3,4-epoxytetrahydrofuran.     

Single crystal EPR study of VO(II)-doped magnesium potassium Tutton’s salt — Part 4

Single crystal EPR studies of VO(II)-doped magnesium potassium Tutton’s salt have been carried out at room temperature. The results indicate that the paramagnetic impurity has entered the lattice, both substitutionally and interstitially and the maximum hyperfine for the substitutional site along the a axis corresponds to the minimum hyperfine for interstitial site and vice versa. The spin Hamiltonian parameters obtained from single crystal data for these sites are: Site 1, g_||=1.954(1); g=1.998(1), A_||=19.80(2) mT; A=7.61(2) mT; Site 2, g_||=1.997(1); g=1.952(1), A_||=7.66(2) mT; A=19.85(2) mT. Superhyperfine from ligand protons have been observed at certain orientations for Site 2 impurity. Powder spectrum shows a set of eight parallel and perpendicular features indicating the presence of only one site and these values matched with Site 1 values. From these observations, it has been concluded that the two vanadyl impurities are approximately at right angles to each other. Cooling the sample to 77 K does not change the spectra appreciably. The admixture coefficients have been calculated from Site 1 data, which agree well with the reported values.     

Synthesis of titanium silicalite-1 (TS-1) zeolite with high content of Ti by a dry gel conversion method using amorphous TiO2–SiO2 composite with highly dispersed Ti species

In this study, we have developed a new method to synthesize mesoporous titanium silicalite-1 (TS-1) with a higher content of active titanium in the framework (more than 5%) than that obtained from the conventional hydrothermal synthesis. The new method combines two methods as follows: (1) a sol-gel method in tetrahydrofuran for the synthesis of TiO₂–SiO₂ composite with highly dispersed Ti species and (2) a dry gel conversion method for the crystallization to TS-1. This investigation revealed that the dispersion of Ti in the starting materials was quite important to synthesize mesoporous TS-1 with high content of Ti besides dry conversion method. The obtained mesoporous TS-1 with a high content of titanium showed higher catalytic activity in 1-hexene epoxidation than conventional TS-1. This high activity is likely to originate from the high content of titanium in the framework.     

An EPR investigation of acetonitrile reactivity with superoxide radicals on polycrystalline TiO<Subscript>2</Subscript>

The interaction of acetonitrile with superoxide radicals over a polycrystalline TiO₂ (Degussa P25) surface was investigated using continuous-wave electron paramagnetic resonance (cw-EPR) spectroscopy. For the first time, a thermally unstable radical intermediate has been observed following the low-temperature exposure of acetonitrile to surface-adsorbed O₂⁻ radicals. The radical intermediate has been identified as an [O₂⁻···CH₃CN] type surface complex characterised by the g values of g ₁ = 2.031, g ₂ = 2.010 and g ₃ = 2.003. This surface complex is thermally unstable and decomposes at temperatures of T > 240 K. A second oxygen-centred species was also observed following acetonitrile adsorption, characterised by the spin Hamiltonian parameters of g ₁ = 2.028, g ₂ = 2.010, g ₃ = 2.004, A ₁ = 1.2 mT, A ₂ = 1.0 mT and A ₃ = 1.0 mT, and was assigned to a hydroperoxy radical (HO₂^•).     

多级孔NiMo负载TS-1分子筛催化剂的制备及其加氢脱硫性能

钛硅(TS-1)分子筛的微孔孔道严重限制了其在复杂分子催化转化中的应用,为了克服这一问题,通过酸洗脱、碱刻蚀及二者相结合的方法制备了多级孔TS-1分子筛,并采用等体积共浸渍法制备了相应的NiMo负载型催化剂;使用X射线衍射(XRD)、N₂吸附-脱附、吡啶吸附红外光谱(Py-FTIR)、氢气程序升温还原(H₂-TPR)、X射线光电子能谱(XPS)和高分辨透射电子显微镜(HR-TEM)等方法对多级孔TS-1分子筛的理化性质进行了表征;以二苯并噻吩(DBT)为探针对催化剂的加氢脱硫(HDS)性能进行了评价。结果表明,和常规TS-1分子筛相比,多级孔TS-1分子筛保持了MFI拓扑结构,比表面积增大且具有介孔结构,分子筛表面形成了适量的Brønsted酸中心;相应催化剂上活性金属与载体间相互作用得以改善,MoS₂片晶长度和堆垛层数适宜,形成了更多的NiMoS活性相;催化剂活性和选择性均有所提升,尤其是酸洗脱获得的NiMo/AT-TS-1催化剂的活性相较未经处理的NiMo/TS-1催化剂提升了1.2倍,直接脱硫(DDS)路径选择性提升了22%。     

多级孔NiMo负载TS-1分子筛催化剂的制备及其加氢脱硫性能

钛硅(TS-1)分子筛的微孔孔道严重限制了其在复杂分子催化转化中的应用,为了克服这一问题,通过酸洗脱、碱刻蚀及二者相结合的方法制备了多级孔 TS-1 分子筛,并采用等体积共浸渍法制备了相应的 NiMo 负载型催化剂;使用 X 射线衍射(XRD)、N₂吸附-脱附、吡啶吸附红外光谱(Py-FTIR)、氢气程序升温还原(H₂-TPR)、X射线光电子能谱(XPS)和高分辨透射电子显微镜(HR-TEM)等方法对多级孔TS-1分子筛的理化性质进行了表征;以二苯并噻吩(DBT)为探针对催化剂的加氢脱硫(HDS)性能进行了评价。结果表明,和常规TS-1分子筛相比,多级孔TS-1分子筛保持了MFI拓扑结构,比表面积增大且具有介孔结构,分子筛表面形成了适量的Brønsted酸中心;相应催化剂上活性金属与载体间相互作用得以改善,MoS₂片晶长度和堆垛层数适宜,形成了更多的 NiMoS活性相;催化剂活性和选择性均有所提升,尤其是酸洗脱获得的 NiMo/AT-TS-1催化剂的活性相较未经处理的NiMo/TS-1催化剂提升了1.2倍,直接脱硫(DDS)路径选择性提升了22%。     

纳米LiMnPO_4的制备与电化学性能表征

采用两步加热Polyol法制备了纳米LiMnPO4正极材料,详细研究了第一加热平台温度T1(T1=100,110,120,130,140,150°C)对样品物理性质及电化学性能的影响.通过X射线衍射(XRD)、扫描电镜(SEM)及比表面积测试(BET)对样品的晶体结构与微观形貌进行了表征.结果表明,在不同温度T1下得到的样品均为片状结构;T1=100-120°C时合成的样品含有杂相,且比表面积小于15 m2?g-1;在T1=130°C时,得到纯相LiMnPO4样品,且比表面积增至46.3 m2?g-1;随着T1的进一步升高,样品比表面积稍有下降,维持在35-37 m2?g-1之间.纳米LiMnPO4的电化学性能变化趋势与比表面积基本一致,T1=130°C时合成的样品呈现最优的电化学性能,在0.1C倍率下放电容量达到129 mAh?g-1,在5C倍率时达到81 mAh?g-1,这表明LiMnPO4的比表面积是决定其电化学性能的关键因素之一.     

Formation and stabilization of Pd(III) in presence of the porphyrinato-type ligand bilirubin

Formation of transient Pd(III) species was established in the course of PdCL₄ ²⁻-bilirubin (BR) reaction in basic-water medium. Using the EPR method the formation of an octahedral low-spin PdL.2H₂O complex was proved exhibiting an anisotropic 2-component EPR spectrum (g₁=2.007 and g_u=1.998) and effective magnetic moment μ_eff = 1.7 BM.     

Electronic Structure Modulation in an Exceptionally Stable Non‐Heme Nitrosyl Iron(II) Spin‐Crossover Complex

The highly stable nitrosyl iron(II) mononuclear complex [Fe(bztpen)(NO)](PF₆)₂ (bztpen=N‐benzyl‐N,N′,N′‐tris(2‐pyridylmethyl)ethylenediamine) displays an S=1/2?S=3/2 spin crossover (SCO) behavior (T_1/2=370 K, ΔH=12.48 kJ mol^?1, ΔS=33 J K^?1 mol^?1) stemming from strong magnetic coupling between the NO radical (S=1/2) and thermally interconverted (S=0?S=2) ferrous spin states. The crystal structure of this robust complex has been investigated in the temperature range 120–420 K affording a detailed picture of how the electronic distribution of the t_2g–e_g orbitals modulates the structure of the {FeNO}⁷ bond, providing valuable magneto–structural and spectroscopic correlations and DFT analysis.     

The effects of temperature on ESR spectrum of gamma-irradiated ammonium tartrate

Unirradiated ammonium tartrate (AT) samples do not exhibit any ESR signal. However, irradiation produces an unresolved singlet at g=2.0034±0.0006 with two shoulders at g₁=2.0093±0.0006 and g₂=2.0048±0.0006. The dose–response curve was found to increase linearly with the applied radiation doses in the range of 0.1–2.0 kGy and the slope of this curve was increased as the modulation amplitude increased. The activation energy value E_a=69.0±1.2 kJ/mol was calculated from Arrhenius plot for the radical species responsible from ESR spectrum of irradiated AT.     

Rh(OH)x/TS-1@KCC-1双功能催化剂上一锅反应合成伯酰胺

在微乳液体系中成功地将花瓣状介孔氧化硅微球(KCC-1)包覆在钛硅分子筛TS-1表面, 得到了一种新型微孔/介孔复合核壳结构材料TS-1@KCC-1. 详细考察了TS-1@KCC-1的合成条件及可能的形成机理. 适宜的合成温度及时间分别为373-393 K和4 h. 壳层厚度可方便地通过改变硅源正硅酸乙酯和TS-1的比例在25-80 nmm间进行调控. 以TS-1@KCC-1为载体负载Rh(OH)_x后即得到双功能催化材料Rh(OH)_x/TS-1@KCC-1, 该材料同时具有Ti和Rh(OH)_x活性中心, 可以高效催化醛、氨水和过氧化氢经一锅串联反应直接制备得到伯酰胺.     

Heat Dissipation of Flying Wax Moths (Galleria Mellonella) Measured by Means of Direct Calorimetry

Heat production rates and flight speed of adult wax moths (Galleria mellonella) were investigated by means of direct calorimetry at T_A=20 and 30°C. Specific heat production rates were not significantly different between males and females at T_A=20°C (p_TH=747±123.7 mW g^-1, n=5 for males and p_TH=791±169 mW g^-1, n=5 for females) even with females having a higher body mass (M_B=83.8±21.6 mg, n=9 for males and M_B=146.4±25.7 mg, n=11 for females) and wing load. In females, heat production rates were dependent on temperature with higher heat production rates at T_A=20°C (p_TH=791±169 mW g^-1, n=5) than at T_A=30°C (p_TH=441±74 mW g^-1, n=6). Flight speed was also clearly correlated with T_A. Both males and females flew more slowly at T_A=20 than at 30°C. This revised version was published online in August 2006 with corrections to the Cover Date.     

ESR linewidths and g-values of some two-dimensional copper bromide salts

The angular variation of the g factor and linewidths of several (RNH₃)CuBr₄ salts are reported. The square planar CuBr^2?₄ anions present in the structures have spin-hamiltonian parameters of g=2.047 and g=2.153. The linewidths show a (3 cos²₀?1) dependence. The temperature dependence of the linewidths is also discussed.     

Reaction mechanism of the ammoximation of ketones catalyzed by TS-1

Summary The liquid-phase adsorption of acetone, butanone, cyclohexanone, 3-methylcyclohexanone and 4-butylcyclohexanone on TS-1 were measured, and the direct ammoximation reactions of these ketones with H₂O₂and NH₃catalyzed by TS-1 were studied. The catalysts after reaction were characterized by TGA. The adsorption results showed that acetone, butanone, cyclohexanone and 3-methylcyclohexanone could enter into the cavity of TS-1, while 4-butylcyclohexanone could not. In the ammoximation reactions, all the ketones were converted into the corresponding oximes in highconversions and selectivities. In combination with the TGA results, it is inferred thatthe ammoximation reactions of acetone and butanone may occur to some extent inside the pores of TS-1. For cyclohexanone and 3-methylcyclohexanone, the ketone-involving step may occur inside the pores of TS-1 to a limited extent but for 4-butylcyclohexanone, may only occur outside the catalyst.</o:p>     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Gas-phase structure and conformational properties of copper (I) pivalate dimer (CuC5H9O2)2

The molecular structure and conformational properties of gaseous dimer of copper (I) pivalate, Cu₂piv₂, have been studied by gas electron diffraction (GED) at 413(5) K and quantum chemical calculations (DFT and MP2). The molecule possesses a planar eight-membered skeleton. Two conformers, “staggered” of C _2h symmetry and “eclipsed” of C _2v symmetry, were found for Cu₂piv₂ in the gas phase. The following geometric parameters of the skeleton ring and the tert-butyl groups have been determined from the GED experiment for the “staggered” form: r_g(Cu···Cu) = 2.520(8) Å, r_g(Cu–O)_ave = 1.871(4) Å, r_g(C–O)_ave = 1.273(3) Å, r_g(C–C)_ring-tert = 1.531(4) Å, r_g(C–C)_{tert-out-of-plane-ring} = 1.536(4) Å, r_g(C–C)_{tert-in-the-plane-ring} = 1.527(4) Å, r_g(C–H)_ave = 1.087(5) Å, (O–Cu–O) = 172.12°(3). Computations predict the internal rotation of the tert-butyl groups to be independent. The value of calculated Wiberg bond index for Cu···Cu testifies the existence of weak bonding between two copper atoms.