Fermentation Performance and Structure Characteristics of Xanthan Produced by <Emphasis Type="Italic">Xanthomonas campestris</Emphasis> with a Glucose/Xylose Mixture

The ability of Xanthomonas campestris to convert glucose and xylose to xanthan and the structure of xanthan derived from the glucose/xylose mixture media are important when the lignocelluloses hydrolysate was used in xanthan production. In this paper, the features related to xanthan fermentation in the glucose/xylose mixture media and the structures of xanthan derived from the mixture media were studied. Glucose was the preferred carbon source to produce xanthan while xylose was also utilized with a very low consumption rate. When the fraction of glucose decreased from 100% to 25%, the glucose consumption rate and xanthan production rate reduced from 0.44 g L⁻¹ h⁻¹ to 0.25 g L⁻¹ h⁻¹ and 0.21 g L⁻¹ h⁻¹ to 0.04 g L⁻¹ h⁻¹ respectively while xylose was consumed at a very stable rate (0.053–0.060 g L⁻¹ h⁻¹). On the other hand, when the xylose fraction increased from 0% to 50%, pyruvate and acetate content of xanthan increased from 2.43% to 3.78% and 2.55% to 7.05%. The existence of xylose also led to higher average molecular weight. Therefore, it could be concluded that xylose was not efficiently utilized by X. campestris to produce xanthan. The concentration of glucose rather than the total sugar was the main factor to determine the xanthan production. But xylose was helpful to improve the quality of xanthan.     

Influence of inhibitory compounds and minor sugars on xylitol production by <Emphasis Type="Italic">Debaryomyces hansenii</Emphasis>

To obtain in-depth information on the overall metabolic behavior of the new good xylitol producer Debaryomyces hansenii UFV-170, batch bioconversions were carried out using semisynthetic media with compositions simulating those of typical acidic hemicellulose hydrolysates of sugarcane bagasse. For this purpose, we used media containing glucose (4.3–6.5 g/L), xylose (60.1–92.1 g/L), or arabinose (5.9–9.2 g/L), or binary or ternary mixtures of them in either the presence or absence of typical inhibitors of acidic hydrolysates, such as furfural (1.0–5.0 g/L), hydroxymethylfurfural (0.01–0.30 g/L), acetic acid (0.5–3.0 g/L), and vanillin (0.5–3.0 g/L). D. hansenii exhibited a good tolerance to high sugar concentrations as well as to the presence of inhibiting compounds in the fermentation media. It was able to produce xylitol only from xylose, arabitol from arabinose, and no glucitol from glucose. Arabinose metabolization was incomplete, while ethanol was mainly produced from glucose and, to a lesser less extent, from xylose and arabinose. The results suggest potential application of this strain in xyloseto-xylitol bioconversion from complex xylose media from lignocellulosic materials.     

Examining the Potential of Plasma-Assisted Pretreated Wheat Straw for Enzyme Production by <Emphasis Type="Italic">Trichoderma reesei</Emphasis>

Plasma-assisted pretreated wheat straw was investigated for cellulase and xylanase production by Trichoderma reesei fermentation. Fermentations were conducted with media containing washed and unwashed plasma-assisted pretreated wheat straw as carbon source which was sterilized by autoclavation. To account for any effects of autoclavation, a comparison was made with unsterilized media containing antibiotics. It was found that unsterilized washed plasma-assisted pretreated wheat straw (which contained antibiotics) was best suited for the production of xylanases (110 IU ml⁻¹) and cellulases (0.5 filter paper units (FPU) ml⁻¹). Addition of Avicel boosted enzyme titers with the highest cellulase titers (1.5 FPU ml⁻¹) found with addition of 50 % w/w Avicel and with the highest xylanase production (350 IU ml⁻¹) reached in the presence of 10 % w/w Avicel. Comparison with enzyme titers from other nonrefined feedstocks suggests that plasma pretreated wheat straw is a promising and suitable substrate for cellulase and hemicellulase production.     

Ethanol Production from Residual Wood Chips of Cellulose Industry: Acid Pretreatment Investigation,Hemicellulosic Hydrolysate Fermentation,and Remaining Solid Fraction Fermentation by SSF Process

Current research indicates the ethanol fuel production from lignocellulosic materials, such as residual wood chips from the cellulose industry, as new emerging technology. This work aimed at evaluating the ethanol production from hemicellulose of eucalyptus chips by diluted acid pretreatment and the subsequent fermentation of the generated hydrolysate by a flocculating strain of Pichia stipitis. The remaining solid fraction generated after pretreatment was subjected to enzymatic hydrolysis, which was carried out simultaneously with glucose fermentation [saccharification and fermentation (SSF) process] using a strain of Saccharomyces cerevisiae. The acid pretreatment was evaluated using a central composite design for sulfuric acid concentration (1.0–4.0 v/v) and solid to liquid ratio (1:2–1:4, grams to milliliter) as independent variables. A maximum xylose concentration of 50 g/L was obtained in the hemicellulosic hydrolysate. The fermentation of hemicellulosic hydrolysate and the SSF process were performed in bioreactors and the final ethanol concentrations of 15.3 g/L and 28.7 g/L were obtained, respectively.     

Inhibitors Compounds on Sugarcane Bagasse Saccharification: Effects of Pretreatment Methods and Alternatives to Decrease Inhibition

Considering bioethanol production, extensive research has been performed to decrease inhibitors produced during pretreatments, to diminish energy input, and to decrease costs. In this study, sugarcane bagasse was pretreated with NaOH, H₂SO₄, and water. The higher concentration of phenols, 3.3 g/L, was observed in biomass liquid fraction after alkaline pretreatment. Acid pretreatment was responsible to release considerable acetic acid concentration, 2.3 g/L, while water-based pretreatment was the only to release formic acid, 0.02 g/L. Furans derivatives were not detected in liquid fractions regardless of pretreatment. Furthermore, washing step removed most of the phenols from pretreated sugarcane bagasse. Saccharification of alkali-pretreated biomass plus polyethylene glycol (PEG) at 0.4% (w/v) enhanced 8 and 26% the glucose and the xylose release, respectively, while polyvinylpyrrolidone (PVP) also at 0.4% (w/v) increased the release by 10 and 31% of these sugars, respectively, even without washing and filtration steps. Moreover, these polymers cause above 50% activation of endoglucanase and xylanase activities which are crucial for biomass hydrolysis.

     

Ethanol Production from Cashew Apple Bagasse: Improvement of Enzymatic Hydrolysis by Microwave-Assisted Alkali Pretreatment

In this work, the potential of microwave-assisted alkali pretreatment in order to improve the rupture of the recalcitrant structures of the cashew able bagasse (CAB), lignocellulosic by-product in Brazil with no commercial value, is obtained from cashew apple process to juice production, was studied. First, biomass composition of CAB was determined, and the percentage of glucan and lignin was 20.54 ± 0.70% and 33.80 ± 1.30%, respectively. CAB content in terms of cellulose, hemicelluloses, and lignin, 19.21 ± 0.35%, 12.05 ± 0.37%, and 38.11 ± 0.08%, respectively, was also determined. Results showed that, after enzymatic hydrolysis, alkali concentration exerted influence on glucose formation, after pretreatment with 0.2 and 1.0 mo L⁻¹ of NaOH (372 ± 12 and 355 ± 37 mg g_glucan⁻¹) when 2% (w/v) of cashew apple bagasse pretreated by microwave-assisted alkali pretreatment (CAB-M) was used. On the other hand, pretreatment time (15–30 min) and microwave power (600–900 W) exerted no significant effect on hydrolysis. On enzymatic hydrolysis step, improvement on solid percentage (16% w/v) and enzyme load (30 FPU g_CAB-M⁻¹) increased glucose concentration to 15 g L⁻¹. The fermentation of the hydrolyzate by Saccharomyces cerevesiae resulted in ethanol concentration and productivity of 5.6 g L⁻¹ and 1.41 g L⁻¹ h⁻¹, respectively.     

Determination of 11 priority pollutant phenols in wastewater using dispersive liquid—liquid microextraction followed by high-performance liquid chromatography—diode-array detection

Dispersive liquid—liquid microextraction coupled with high-performance liquid chromatography—diode-array detection was applied for the extraction and determination of 11 priority pollutant phenols in wastewater samples. The analytes were extracted from a 5-mL sample solution using a mixture of carbon disulfide as the extraction solvent and acetone as the dispersive solvent. After extraction, solvent exchange was carried out by evaporating the solvent and then reconstituting the residue in a mixture of methanol–water (30:70). The influences of different experimental dispersive liquid—liquid microextraction parameters such as extraction solvent type, dispersive solvent type, extraction and dispersive solvent volume, salt addition, and pH were studied. Under optimal conditions, namely pH 2, 165-μL extraction solvent volume, 2.50-mL dispersive solvent volume, and no salt addition, enrichment factors and limits of detection ranged over 30–373 and 0.01–1.3 μg/L, respectively. The relative standard deviation for spiked wastewater samples at 10 μg/L of each phenol ranged between 4.3 and 19.3% (n = 5). The relative recovery for wastewater samples at a spiked level of 10 μg/L varied from 65.5 to 108.3%.     

Ethanol Production from H<Subscript>2</Subscript>SO<Subscript>3</Subscript>-Steam-Pretreated Fresh Sweet Sorghum Stem by Simultaneous Saccharification and Fermentation

The present work presents an alternative approach to ethanol production from sweet sorghum: without detoxification, acid-impregnated fresh sweet sorghum stem which contains soluble (glucose and sucrose) and insoluble carbohydrates (cellulose and hemicellulose) was steam pretreated under mild temperature of 100 °C. Simultaneous saccharification and fermentation experiments were performed on the pretreated slurries using Saccharomyces cerevisiae. Experimentally, ground fresh sweet sorghum stem was combined with H₂SO₃ at dosages of 0.25, 0.50, and 0.75 g/g dry matter (DM) and steam pretreated by varying the residence time (60, 120, or 240 min). According to enzymatic hydrolysis results and ethanol yields, H₂SO₃ was a powerful and mild acid for improving enzymatic digestibility of sorghum stem. At a solid loading of 10% (w/v) and acid dosage of 0.25 g/g DM H₂SO₃ at 100 °C for 120 min, 44.5 g/L ethanol was obtained after 48 ± 4 h of simultaneous saccharification and fermentation. This corresponded to an overall ethanol yield of 110% of the theoretical one, based on the soluble carbohydrates in the fresh sweet sorghum stem. The concentrations of hydroxymethylfurfural and furfural of the sulfurous acid pretreated samples were below 0.4 g/L. Ethanol would not inhibit the cellulase activity, at least under the concentration of 34 g/L.     

Pretreatment of Rice Straw Using a Butanone or an Acetaldehyde Dilute Solution Explosion for Producing Ethanol

Ethanol conversion from rice straw using butanone and acetaldehyde dilute solution explosions was evaluated based on the optimization of pure water explosion. To decrease residual inhibitor content, the exploded slurry was dried and investigated at different temperature. Using a 0.9-mol/L butanone solution explosion, with the explosion pressure set at 3.1 MPa, the residence time at 7 min, the dried rice straw-to-water ratio at 1:3 (w/w), and the exploded slurry drying temperuture at 90 °C for 8 h, the yields of total sugar, glucose, and xylose were 85%, 88%, 82% (w/w), respectively, and the ethanol productivity was 26.0 g/100 g rice straw dry matter. Moreover, 0.5-mol/L acetaldehyde dilute solution explosion improved the efficiency of enzymatic hydrolysis (EH) and simultaneous saccharification and co-fermentation (SSCF), and the residual inhibitors had negligible effects on EH and SSCF after detoxification by drying. The results suggested that compared with pure water explosions, the use of butanone and of acetaldehyde dilute solution explosions lowered the explosive temperature and improved the sugar yield, although relative crystallinity of the rice straw dry matter was increased after the explosion.     

Determination of cyanide in blood by electrospray ionization tandem mass spectrometry after direct injection of dicyanogold

An electrospray ionization tandem mass spectrometric (ESI-MS-MS) method has been developed for the determination of cyanide (CN^–) in blood. Five microliters of blood was hemolyzed with 50 μL of water, then 5 μL of 1 M tetramethylammonium hydroxide solution was added to raise the pH of the hemolysate and to liberate CN^– from methemoglobin. CN^– was then reacted with NaAuCl₄ to produce dicyanogold, Au(CN)₂^–, that was extracted with 75 μL of methyl isobutyl ketone. Ten microliters of the extract was injected directly into an ESI-MS-MS instrument and quantification of CN^– was performed by selected reaction monitoring of the product ion CN^– at m/z 26, derived from the precursor ion Au(CN)₂^– at m/z 249. CN^– could be measured in the quantification range of 2.60 to 260 μg/L with the limit of detection at 0.56 μg/L in blood. This method was applied to the analysis of clinical samples and the concentrations of CN^– in the blood were as follows: 7.13 ± 2.41 μg/L for six healthy non-smokers, 3.08 ± 1.12 μg/L for six CO gas victims, 730 ± 867 μg for 21 house fire victims, and 3,030 ± 97 μg/L for a victim who ingested NaCN. The increase of CN^– in the blood of a victim who ingested NaN₃ was confirmed using MS-MS for the first time, and the concentrations of CN^– in the blood, gastric content and urine were 78.5 ± 5.5, 11.8 ± 0.5, and 11.4 ± 0.8 μg/L, respectively.     

Production and Characterization of Cellulose by <Emphasis Type="Italic">Acetobacter</Emphasis> sp. V6 Using a Cost-Effective Molasses–Corn Steep Liquor Medium

In order to reduce of the manufacturing cost of bacterial cellulose (BC), BC production by Acetobacter sp. V6 was investigated in shaking culture using molasses and corn steep liquor (CSL) as the sole carbon and nitrogen sources, respectively. The highest BC production was obtained with Ca₃(PO₄)₂-treated molasses. Maximum BC yield (2.21 ± 0.04 g/l) was obtained at 5% (w/v) total sugar in molasses. In improved medium containing molasses and CSL, BC production was observed in the medium after 1 day of incubation and increased rapidly thereafter with maximum yield (3.12 ± 0.03 g/l) at 8 days. This value was approximately twofold higher than the yield in the complex medium. Physical properties of BC from the complex and molasses media were studied using Fourier-transform infrared (FT-IR) spectroscopy and X-ray diffractometer. By FT-IR, all the BC were found to be of cellulose type І, the same as typical native cellulose. The relative crystallinity of BC produced in the complex and molasses media were 83.02 and 67.27%, respectively. These results suggest that molasses and CSL can be useful low-cost substrates for BC production by Acetobacter sp. V6 without supplementation with expensive nitrogen complexes such as yeast extract and polypeptone, leading to the reduction in the production costs.     

Enhancement of Human γ-Interferon Production in Recombinant <Emphasis Type="Italic">E. coli</Emphasis> Using Batch Cultivation

Development of inexpensive and simple culture media and appropriate induction conditions are always favorable for industry. In this research, chemical composition and stoichiometric data for γ-interferon production and recombinant Escherichia coli growth were used in order to achieve a simple medium and favorable induction conditions. To achieve this goal, the effects of medium composition and induction conditions on the production of γ-interferon were investigated in batch culture of E. coli BL21 (DE3) [pET3a-ifnγ]. These conditions were considered as suitable conditions for the production of γ-interferon: 2.5× M9 medium, supplemented with a mixture of amino acids (milligram per liter), including glutamic acid 215, aspartic acid 250, lysine 160, and phenylalanine 90, and induction at late-log phase (OD₆₀₀ = 4.5). Under these conditions, dry cell weight of 6 ± 0.2 g/l and γ-interferon concentration of 2.15 ± 0.1 g/l were obtained. Later, without changing the concentration ratio of amino acids and glucose, the effect of increase in the primary glucose concentration on productivity of γ-interferon was investigated. It was found that 25 g/l glucose will result in maximum attainable biomass and recombinant human γ-interferon. At improved conditions, a dry cell weight of 14 ± 0.2 g/l, concentration and overall productivity of γ-interferon 4.2 ± 0.1 g/l and 420 ± 10 mg/l h, respectively, were obtained.     

The Ethanol Tolerance of <Emphasis Type="Italic">Pachysolen tannophilus</Emphasis> in Fermentation on Xylose

The influence of ethanol on fermentation by Pachysolen tannophilus was studied. When xylose utilization rate was 80%, ethanol concentration began to decline. Fermentation of P. tannophilus was affected by ethanol addition in the beginning of fermentation; average xylose consumption rate was 0.065 g·l⁻¹·h⁻¹, and maximum specific growth rate was 0.07 h⁻¹ at 28 g·l⁻¹ ethanol, comparing with the average xylose consumption rate of 0.38 g·l⁻¹·h⁻¹ and maximum specific growth rate of 0.14 h⁻¹ in fermentation with no ethanol addition; P. tannophilus stopped growth at 40 g·l⁻¹ ethanol. When the initial ethanol concentration was 30 g·l⁻¹, the addition of glucose in xylose media made the growth of P. tannophilus better, and the most favorable glucose concentration was 15 g·l⁻¹ with the highest biomass of 1.51 g·l⁻¹ as compared with that of 0.95 g·l⁻¹ in pure xylose media.     

The Correlations Between TCA-Glyoxalate Metabolite and Antibiotic Production of <Emphasis Type="Italic">Streptomyces</Emphasis> sp. M4018 Grown in Glycerol,Glucose, and Starch Mediums

The alterations of organic acids citrate, α-ketoglutarate, succinate, fumarate, malate production together with isocitrate lyase activity as a glyoxalate shunt enzyme, and antibiotic production of Streptomyces sp M4018 were investigated in relation to changes in the glucose, glycerol and starch concentrations (5–20 g/L) after identification as a strain of Streptomyces hiroshimensis based on phenotypic and genotypic characteristics. The highest intracellular citrate and α-ketoglutarate levels in 20 g/l of glucose, glycerol, and starch mediums were 399.47 ± 4.78, 426.93 ± 6.40, 355.84 ± 5.38 ppm and 444.81 ± 5.12, 192.96 ± 2.26, 115.20 ± 2.87 ppm, respectively. The highest succinate, malate, and fumarate levels were also determined in 20 g/l of glucose medium as 548.9 ± 11.21, 596.15 ± 8.26, and 406.42 ± 6.59 ppm and the levels were significantly higher than the levels in glycerol and starch. Extracellular organic acid levels measured also showed significant correlation with carbon source concentrations by showing negative correlation with pH levels of the growth medium. The antibiotic production of Streptomyces sp. M4018 was also higher in glucose medium as was the case also for organic acids when compared with glycerol. On the other hand, there is no production in starch.     

High-Yield Hypocrellin A Production in Solid-State Fermentation by <Emphasis Type="Italic">Shiraia</Emphasis> sp. SUPER-H168

Hypocrellin A production by Shiraia sp. SUPER-H168 was studied under solid-state fermentation. Corn was found to be the best substrate after evaluating eight kinds of agro-industrial crops and residues. The optimized solid-state fermentation conditions were as follows: inoculum size 3 × 10⁶ spores, substrate particle size 0.8–1 mm, initial moisture content 50%, and temperature 30 °C. Six kinds of external carbon source and seven kinds of external nitrogen source were evaluated, respectively, for HA production. Glucose and NaNO₃ were the best. The combination of them was optimized by the response surface method. The optimum compositions of the supplementary glucose and NaNO₃ were 1.65 g/100 g and 0.43 g/L, respectively. Hypocrellin A production reached 4.7 mg/g.     

Characterization of a high-productivity recombinant strain of Zymomonas mobilis for ethanol production from glucose/xylose mixtures

The fermentation characteristics of a recombinant strain of Zymomonas mobilis ZM4(pZB5) capable of converting both glucose and xylose to ethanol have been further investigated. Previous studies have shown that the strain ZM4(pZB5) was capable of converting a mixture o 65 g/L of glucose and 65 g/L of xylose to 62 g/L of ethanol in 48 h with an overall yield of 0.46 g/g. Higher sugar concentrations (e.g., 75/75 g/L) resulted in incomplete xylose utilization (80 h). In the present study, further kinetic evaluations at high sugar levels are reported. Acetate inhibition studies and evaluation of temperature and pH effects indicated increased maximum specific uptake rates of glucose and xylose under stressed conditions with increased metabolic uncoupling. A high-productivity system was developed that involved a membrane bioreactor with cell recycling. At sugar concentrations of approx 50/50 g/L of glucose/xylose, an ethanol concentration of 50 g/L, an ethanol productivity of approx 5 g/(L·h), and a yield (Y _p/s) of 0.50 g/g were achieved. Decreases in cell viability were found in this system after attainment of an initial steady state (40–60 h); a slow bleed of concentrated cells may be required to overcome this problem.     

Gene Cloning,Heterologous Expression,and Characterization of a High Maltose-Producing α-Amylase of <Emphasis Type="Italic">Rhizopus oryzae</Emphasis>

A putative α-amylase gene, designated as RoAmy, was cloned from Rhizopus oryzae. The deduced amino acid sequence showed the highest (42.8%) similarity to the α-amylase from Trichoderma viride. The RoAmy gene was successfully expressed in Pichia pastoris GS115 under the induction of methanol. The molecular weight of the purified RoAmy determined by sodium dodecyl sulfate polyacrylamide gel electrophoresis was approximately 48 kDa. The optimal pH and temperature were 4–6 and 60 °C, respectively. The enzyme was stable at pH ranges of 4.5–6.5 and temperatures below 50 °C. Purified RoAmy had a K _m and V _max of 0.27 mg/ml and 0.068 mg/min, respectively, with a specific activity of 1,123 U/mg on soluble starch. Amylase activity was strongly inhibited by 5 mM Cu²⁺ and 5 mM Fe²⁺, whereas 5 mM Ca²⁺ showed no significant effect. The RoAmy hydrolytic activity was the highest on wheat starch but showed only 55% activity on amylopectin relative to soluble corn starch, while the pullulanase activity was negligible. The main end products of the polysaccharides tested were glucose and maltose. Maltose reached a concentration of 74% (w/w) with potato starch as the substrate. The enzyme had an extremely high affinity (K _m = 0.22 mM) to maltotriose. A high ratio of glucose/maltose of 1:4 was obtained when maltotriose was used at an initial concentration of 40 mM.     

Synthesis,Characterization, and Oil Recovery Application of Biosurfactant Produced by Indigenous <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> WJ-1 Using Waste Vegetable Oils

A bacterial strain was isolated and cultured from the oil excavation areas in tropical zone in northern China. The biochemical characteristics and partial sequenced 16S rRNA gene of isolate, WJ-1, was identical to those of cultured representatives of the species Pseudomonas aeruginosa. This bacterium was able to produce a type of biosurfactant. Compositional analysis revealed that the extracted biosurfactant was composed of high percentage lipid (∼74%, w/w) and carbohydrate (∼20%, w/w) in addition to a minor fraction of protein (∼6%, w/w). The best production of 50.2 g/l was obtained when the cells were grown on minimal salt medium containing 6.0% (w/v) glucose and 0.75% (w/v) sodium nitrate supplemented with 0.1% (v/v) element solution at 37 °C and 180 rpm after 96 h. The optimum biosurfactant production pH value was found to be 6.0–8.0. The biosurfactant of WJ-1, with the critical micelle concentration of 0.014 g/L, could reduce surface tension to 24.5 mN/m and emulsified kerosene up to EI₂₄ ≈95. The results obtained from time course study indicated that the surface tension reduction and emulsification potential was increased in the same way to cell growth. However, maximum biosurfactant production occurred and established in the stationary growth phase (after 90 h). Thin layer chromatography, Fourier transform infrared spectrum, and mass spectrum analysis indicate the extracted biosurfactant was affiliated with rhamnolipid. The core holder flooding experiments demonstrated that the oil recovery efficiency of strain and its biosurfactant was 23.02% residual oil.     

Determination of Thiosemicarbazones by Means of the Induced Iodine-Azide Reaction

 The iodine-azide reaction induced by eight thiosemicarbazones was investigated. Inducing properties of thiosemicarbazones are different and depend on the parent carbonyl compound used for synthesis. The inductor coefficients of the examined thiosemicarbazones vary from 61 to 176. Optimum conditions for the determination of microamounts of thiosemicarbazones are given. The detection limit for the determination by the back-titration method depends on the inducing activity and is 0.9 μg for phenyl-thiosemicarbazones and 2 μg for diethyl-thiosemicarbazone in a 5-mL sample, and this corresponds to a concentration of 0.9 × 10⁻⁶ mol/L and , respectively. The automatic titration with the diluted iodine solution decreases the detection limit to about 50 ng in a 10-mL sample. Received October 28, 1998. Revision April 9, 1999.