Acetylenchemie 12. Mitt.: Weitere studien über die phasentransfer-katalysierte umsetzung des 9(10H)-acridinons mil alkinylhalogeniden

By the phase transfer catalyzed reaction of 9(10H)-acridinone with 1-bromo-2-propyne, 10-(2-propynyl)-9(10H)-acridinone is synthesized. As prototropic rearrangement products of this 10-(1,2-propadienyl)-9(10H)-acridinone and 10-(1-propynyl)-9(10H)-acridinone are obtained, Under the given conditins 1-bromo-2butyne leads to 10-(2-butynyl)-9(10H)-acridinone and 2-chloro-3-butyne leads to 10-(1-methyl-1,2-propddienyl)-9(10H)-acridinone, 10-(1-methyl-2-propynyl)-9(10H)-acridinone, 9-(1-methyl-2-propynyloxy)acridine and 10-[1-methyl-3-(3,4-dimethylphenyl-2-propynyl)]-9(10H)-acridinone. The formation of the products is experimentally confirmed and with published work compared.     

痕量H2O2的酶催化-阳离子表面活性剂缔合物微粒共振散射光谱测定

在醋酸盐缓冲溶液中, 辣根过氧化物酶(HRP)催化H2O2与过量的I－反应生成 , 分别与阳离子表面活性剂(CS) 十四烷基苄基二甲基氯化铵(TDMAC)、十二烷基苄基二甲基氯化铵(DDAC)、十六烷基三甲基溴化铵(CTAB)、十八烷基苄基二甲基氯化铵(ODAC)、氯代十六烷基吡啶(CPC)、氯代十二烷基吡啶(DPC)和四丁基碘化铵(TBAI)形成TDMAC-I3, DDAC-I3, CTAB-I3, ODAC-I3, CPC-I3, DPC-I3和TBAI-I3缔合物微粒. 该缔合物微粒均在460 nm处有一个较强的共振散射峰. H2O2浓度在0.17×10－7～173×10－7, 0.43×10－7～173×10－7, 1.73×10－7～259×10－7, 1.73×10－7～86.4×10－7, 1.73×10－7～216×10－7, 0.86×10－7～259×10－7和0.86×10－7～86.4×10－7 mol•L－1范围内分别与各体系在468 nm处的共振光谱强度呈线性关系, 其检出限分别为0.86×10－8, 2.2×10－8, 8.6×10－8, 4.6×10－8, 3.6×10－8, 4.3×10－8和4.4×10－8 mol•L－1. 本文将TDMAC体系用于过氧化氢测定, 结果满意.     

Design,synthesis and biological evaluation of 5-(2-(4-(substituted benzo[d]isoxazol-3-yl)piperazin-1-yl)acetyl)indolin-2-one and 5-(2-(4-substitutedpiperazin-1-yl)acetyl)indolin-2-one analogues as novel anti-tubercular agents

A series of thirty-six novel 5-(2-(4-(benzo[d]isoxazol-3-yl)piperazin-1-yl)acetyl)indolin-2-one and 5-(2-(4-substitutedpiperazin-1-yl)acetyl)indolin-2-one analogues were synthesized, characterized and screened for their in vitro anti-tubercular activity against Mycobacterium tuberculosis H37Rv strain. These compounds exhibited minimum inhibitory concentration between 1.56 and 50 μg/mL. Among these derivatives, compounds 10c, 10d, 10j, 10o and 10v (MIC 6.25 μg/mL) displayed moderate activity, while compounds 10e, 10l, 10q, 10w,10x, 12d, 12e and 12i (MIC 3.12 μg/mL) showed good anti-tubercular activity and compounds 10f, 10k, 10p, 10r, 12f, 12j and 12k (MIC 1.56 μg/mL) exhibited excellent anti-tubercular activity. In addition, MTT assay was accomplished on the active analogues of the series against mouse macrophage (RAW 264.7) cells to evaluate the cytotoxic effect of the newly synthesized compounds and selectivity index of the compounds was determined.     

Stability of ubiquinol‐10 (reduced form of coenzyme Q10) in human blood

The ratio of ubiquinol‐10 in total coenzyme Q₁₀ (TQ₁₀) in human plasma has been proposed as a useful biomarker of oxidative stress. Since ubiquinol‐10 is easily oxidized in air, it is necessary to perform suitable processing at medical institutions prior to analysis. To establish stable storage conditions for blood to determine the ubiquinol‐10/TQ₁₀ ratios properly, the effects of temperature conditions on the stability of ubiquinol‐10 were studied. Blood samples were collected from nine male Japanese volunteers. Changes in ubiquinol‐10/TQ₁₀ ratios in blood samples were evaluated under three temperature conditions (room temperature, refrigerated and ice‐cooled). Plasma levels of ubiquinol‐10 and ubiquinone‐10 were determined by an HPLC system with electrochemical detection and the ubiquinol‐10/TQ₁₀ ratios were calculated. We found that the ubiquinol‐10/TQ₁₀ ratio was stable up to 8 or 4 h when blood samples were stored in refrigerator or ice‐cold container, respectively, and its decreases during these periods were <1.0%. We conclude that, in order to evaluate ubiquinol‐10/TQ₁₀ ratios, blood samples should be stored in a refrigerator or an ice‐cold container, and processed for plasma separation within 4 h. Copyright © 2015 John Wiley & Sons, Ltd.     

Crystalline transition in Nylon 10 10

Variable‐temperature X‐ray diffraction was used to monitor the crystalline transition of Nylon 10 10. It could be found that the α‐phase of the sample transforms into a γ‐phase at about 135°C, if the sample is heated from room temperature to a high temperature, which is the so‐called Brill transition of Nylon 10 10. In addition, Nylon 10 10 was found to crystallize directly in a kind of α‐phase from the melt at high temperature, which is much different from the behavior of Nylon 66 and Nylon 10 12. Upon further cooling to room temperature, Nylon 10 10 preserved the α‐phase revealing two peaks in its XRD patterns. However, if the Nylon 10 10 sample with γ‐form was not melted, but immediately cooled from a temperature between T_B and T_m, the reverse transition from γ‐form to α‐form could be observed at about 130°C, indicating reversible Brill transition of Nylon 10 10.     

Prediction of the detection ranges for HPLC-peroxyoxalate chemiluminescence detection system of fluorescent compounds

Summary A manual method for predicting the detection ranges of fluorescent compounds for the HPLC-peroxyoxalate chemiluminescence detection system is presented utilizing bis(4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl) oxalate (TDPO) as a chemilumigenic reagent. The generated chemiluminescence decay curves were measured on a photomultiplier and extrapolated to zero time based on the first part of the decay curve. Dipyridamole, perylene, DNS-Ser, Rose Bengal, DNS-Asp, Trp-P-1, pyrencarboxylic acid methyl ester, perfenazine, alimemazine, oxypertine, Glu-P-2, benzydamine and doxorubicin gave chemiluminescence intensity (Icl) values of 3.2 × 10⁶, 2.8 × 10⁶, 2.3 × 10⁵, 2.1 × 10⁵, 1.9 × 10⁵, 1.4 × 10⁵, 9.4 × 10³, 6.2 × 10³, 4.2 × 10³, 3.3 × 10³, 2.3 × 10³, 9.7 × 10² and 3.1 × 10², respectively. The reaction conditions for the HPLC-CL detection system were investigated and optimum conditions obtained.     

Enantioanalysis of S-Ketoprofen Using Enantioselective,Potentiometric Membrane Electrodes

Abstract

Maltodextrins with different dextrose equivalent (DE) values (maltodextrin I: DE 4.0–7.0; maltodextrin II: DE 13.0–17.0; maltodextrin III: DE 16.5–19.5) were used for the design of three enantioselective, potentiometric membrane electrodes (EPMEs) for the assay of S-ketoprofen. The linear concentration ranges for the proposed electrodes were 10^?10 to 10^?8, 10^?9 to 10^?5, and 10^?10 to 10^?7 mol/L, with slopes of 58.0, 58.67, and 58.93 mV/decades of concentration and limits of detection of 1.49 × 10^?8, 2.43 × 10^?8, and 4.19 × 10^?11 mol/L for EPMEs based on maltodextrin I, II, and III, respectively. The EPMEs showed high reliability and effectiveness for the enantioanalysis of S-ketoprofen raw material and its pharmaceutical formulations.     

化学发光新体系NaIO4-H2O2-痕量环己烷-多羟基酚的研究及其应用

近年来,一些无机氧化剂在氧化有机物时伴随的化学发光现象引起了分析工作者的广泛兴趣[1,2].NaIO4氧化H2O2会产生弱化学发光,不同的多羟基酚类物质能不同程度地增强这一化学发光行为,据此建立了测定多羟基酚的化学发光法.目前,利用该法测定的酚主要有苯酚[3]、酚的衍生物[4]和连苯三酚[5,6].本文建立的测定连苯三酚的方法检测限较王伦等[3]的利用苯酚对Luminol-H2O2发光体系猝灭作用测定工业废水及Ermiridis[5]以IO4-在碱性介质中直接氧化连苯三酚的检测限低两个数量级,且扩大了测定酚的种类.研究发现,一些非极性有机溶剂对这一化学发光亦有增强和增稳作用,而痕量非极性溶剂由于在水中的溶解性较差,对化学发光的作用尚未受到注意.     

Natural product chemistry,part 137: Oxidation of acridone alkaloids: Synthesis of 5-methoxyacronycine

Summary Epoxidation of the acridone alkaloid acronycine (1) resulted in hydroxylation at the aromatic ring giving 5-hydroxyacronycine (3). The same reaction on 1,3-dimethoxy-10-methyl-9(10H)-acridinone (5) gave 1,3-dimethoxy-2-hydroxy-10-methyl-9(10H)-acridinone (6), 1,3-dimethoxy-2-hydroxy-4-peroxy-10-methyl-9(10H)-acridinone (8), and 1,3-dimethoxy-2,4-diperoxy-10-methyl-9(10H)-acridinone (9).

---

Naturstoffchemie, 137. Mitt.: Oxidierung von Acridonalkaloiden: Synthese des 5-Methoxyacronycins (Kurze Mitt.)

Zusammenfassung Die Epoxidierung des Acridonalkaloids Acronycin führte zu einer Hydroxylierung des aromatischen Rings, wobei 5-Hydroxyacronycin (3) entstand. Die gleiche Reaktion mit 1,3-Dimethoxy-10-methyl-9(10H)acridinon (5) ergab 1,3-Dimethoxy-2-hydroxy-10-methyl-9(10H)acridinon (6), 1,3-Dimethoxy-2-hydroxy-4-peroxy-10-methyl-9(10H)acridinon (8) und 1,3-Dimethoxy-2,4-diperoxy-10-methyl-9(10H)acridinon (9).

     

Square wave adsorptive stripping voltammetric determination of famotidine in urine

Electrochemical studies of famotidine were carried out using voltammetric techniques: cyclic voltammetry, linear sweep and square wave adsorptive stripping voltammetry. The dependence of the current on pH, buffer concentration, nature of the buffer, and scan rate was investigated. The best results for the determination of famotidine were obtained in MOPS buffer solution at pH 6.7. This electroanalytical procedure enabled to determine famotidine in the concentration range 1 × 10⁻⁹–4 × 10⁻⁸ mol L⁻¹ by linear sweep adsorptive stripping voltammetry (LS AdSV) and 5 × 10⁻¹⁰–6 × 10⁻⁸ mol L⁻¹ by square wave adsorptive stripping voltammetry (SW AdSV). Repeatability, precision and accuracy of the developed methods were checked. The detection and quantification limits were found to be 1.8 × 10⁻¹⁰ and 6.2 × 10⁻¹⁰ mol L⁻¹ for LS AdSV and 4.9 × 10⁻¹¹ and 1.6 × 10⁻¹⁰ mol L⁻¹ for SW AdSV, respectively. The method was applied for the determination of famotidine in urine.     

Capillary electrophoresis–electrospray mass spectrometry and HR–ICP–MS for the detection and quantification of 10B-boronophenylalanine (10B–BPA) used in boron neutron capture therapy

Boron neutron capture therapy (BNCT) is a bimodal radiotherapeutic treatment based on the irradiation of neoplastic tissues with neutrons after the tissues have selectively accumulated molecules loaded with nuclides with large neutron capture cross-sections (such boron-10). Boron-10 carriers have been tested to a limited extent, and clinical trials have been conducted on sulfhydryl borane (¹⁰B-BSH) and boronophenylalanine (¹⁰B-BPA). However, precise and accurate measurements of boron-10 concentrations (0.1–100 μg/g) in specimens and samples of limited size (μg scale) are needed in order to be able to biologically characterise new compounds in predictive tissue dosimetry, toxicology and pharmacology studies as well as in clinical investigations. A new approach based on fast separation and detection of ¹⁰B-BPA performed by coupling capillary electrophoresis to electrospray mass spectrometry is reported. This method allows the quantitative analysis and characterisation of ¹⁰B-BPA in a short time with a high separation efficiency. Detection limits of 3 μM for ¹⁰B-BPA and 30 ng/mL for ¹⁰B were obtained with CE–ESI–MS. A quantification limit of 10 μM for ¹⁰B-BPA (100 ng/mL for ¹⁰B) was attained. The total boron-10 concentration was determined by high-resolution inductively coupled mass spectrometry in order to validate the method. Boron-10 isotope measurements were carried out by HR–ICP–MS at medium resolution (R=4000) due to the presence of an isobaric interference at mass 10. Good agreement was obtained between the values from CE–ESI–MS and those from HR–ICP–MS. The method has been successfully used to determine the ¹⁰B-BPA in two lines of cultured cells.     

SYNTHESIS, STRUCTURE AND PROPERTIES OF INTERPENETRATING SULFONIC ACID RESINS WITH HIGH CAPACITY

Two series of interpenetrating sulfonic acid resins (ISAR), 10×n and n×10, were prepared by means of the wet method, and the physicochemical, thermodynamic and kinetic properties of the ISAR were measured. The results show: 10×n resins exhibit better properties than n×10 ones, mainly in higher apparent degree of crosslinking and larger conformational entropy effect, among which, 10×1 resin exhibits the best thermodynamic and kinetic properties. In the DTA graphs of n×10 resins, there are two T_g and two T_(ox), but in those of 10×n, only one T_g and one T_(ox). This result well supports the conclusion that 10×n resins have much better interpenetrating structural aspects.     

The determination of lead and nickel by atomic-absorption spectrometry with a flameless wire loop atomizer

In an extension of studies of flameless atomizers for atomic-absorption spectrometry, an electrically heated tungsten-rhenium alloy wire loop was examined. Reduction of metallic salts to ground-state metal atoms was accomplished with the high temperature produced by the loop. Lead and nickel were investigated. Experimental parameters such as wavelength, slit width, atomization temperature and sheathing gas flow rate were optimized. Absolute detection limits of 6.6·10^?10 and 1.2·10^?10, and absolute sensitivities of 7·10^?10 and 8·10^?11 g of lead, were established for unenclosed and enclosed cells, respectively. The interferences of twenty cations and sixteen anions were studied; foreign cations generally enhanced the lead absorption by retarding its vaporization, allowing the slow detection system to respond more efficiently. Nickel was investigated as a representative less volatile metal; an absolute detection limit of 1.6·10^?9 and an absolute sensitivity of 9·10^?10 g of nickel were established.     

对叔丁基杯[10]冠醚的合成

首次合成一系列杯[10]冠醚。通过将对叔丁基杯[10]芳烃和乙二醇双对甲苯磺酸酯或多甘醇双对甲苯磺酸酯在K2CO3/甲苯或Cs2CO3/丙酮体系中反应,得到一系列杯[10]冠醚:1,2-杯[10]冠-4、1,3-杯[10]冠-2、1,2-,1,3-杯[10]冠-3、1,4-杯[10]冠-4、和1,6-杯[10]冠-4。     

Effects of the ratio of Fe to Co over Fe-CO/SiO2 bimetallic catalysts on their catalytic performance for Fischer-Tropsch synthesis

The Fe-Co/SiO2 bimetallic catalysts with different ratios of Fe to Co were prepared by aqueous incipient wetness impregnation. The catalysts of 10%Fe:0%Co/SiO2, 10%Fe:6%Co/SiO2, 10%Fe:2%Co/SiO2, 10%Fe:10%Co/SiO2, 6%Fe:10%Co/SiO2, 2%Fe:10%Co/SiO2 and 0%Fe: 10%Co/SiO2 by mass were tested in a fixed reactor by the Fischer-Tropsch synthesis. Activity and hydrocarbon distribution were found to be determined by the ratio of iron to cobalt of the catalysts. Higher iron content inhibited the activity, whereas higher cobalt content enhanced the activity of the Fe:Co/SiO2 catalysts. On the other hand, for the catalysts of 10%Fe:6%Co/SiO2, 10%Fe:10%Co/SiO2, 6%Fe:10%Co/SiO2, and 2%Fe:10%Co/SiO2, the total C2–C4 fraction increased (from 10.65% to 26.78%) and C5+ fraction decreased (from 75.75% to 57.63%) at 523 K. Temperature programmed reduction revealed that the addition of cobalt enhanced the reducibility of the Fe:Co/SiO2 catalyst. Metal oxides were present in those catalysts as shown by XRD. The Fe-Co alloy phase was found in the 2%Fe:10%Co/SiO2, 6%Fe:10%Co/SiO2, 10%Fe:10%Co/SiO2, 10%Fe:6%Co/SiO2 catalysts and their crystals were perfect.     

Formation and properties of HCO-10 vesicles

 The characteristics of poly(oxyethylene) hydrogenated caster oil ether (HCO-10) vesicles were studied for the standpoints of encapsulation efficiency, stability, solubilization and permeability or barrier efficiency. The vesicles of 5% HCO-10 had 6.24% of calcein-entrapment efficiency and 240 nm of mean diameter. The stability of HCO-10 vesicle suspensions was dependent on their concentrations. In the vesicle suspensions of 10% HCO-10 or more, both the size of the vesicles and the fluidity of the suspensions obviously varied with incubation time, indicating that a flocculation occurred; whereas, the vesicle suspension of 5% HCO-10 was relatively stable. The solubilization process of HCO-10 vesicles by SDS was similar to that of EggPC liposomes. The rate constants for permeation of Cl ion and calcein were 2.46×10^-3 s^-1 and 5.79×10^-5 s^-1, respectively, suggesting that HCO-10 vesicles possessed some barrier potential for Cl ion and calcein although they were smaller than those of liposomes. Furthermore, the efflux of the solute such as calcein from HCO-10 vesicles was maximum at 37 °C, where the vesicle membrane was presumably destabilized by dehydration of EOs in HCO-10 molecules. Received: 7 May 1996 Accepted: 3 September 1996     

Alkaloids from Ochrosia borbonica

Ten new monoterpenoid indole alkaloids, ochroborines A and B ( 1 and 2 , resp.), 10‐hydroxyisovallesiachotamine ( 3 ), 10‐hydroxyisositsirikine ( 4 ), 10,11‐dimethoxysitsirikine ( 5 ), 10‐methoxyapoyohimbine ( 6 ), 10‐hydroxyakuammidine ( 7 ), akuammidine 17‐O‐β‐D ‐glucoside ( 8 ), 15α‐hydroxyapparicine ( 9 ), and 15α‐hydroxy‐10‐methoxyapparicine ( 10 ), and 24 known alkaloids were isolated from leaves and twigs of Ochrosia borbonica J. F.Gmel . These structures were elucidated based on 1D‐ and 2D‐NMR, FT‐IR, UV, and MS data. 10‐Hydroxyisovallesiachotamine ( 3 ), ellipticine, and 10‐methoxyellipticine showed cytotoxic activities against five human cancer cell lines.     

Chemische und cyclovoltammetrische Untersuchung der Redoxreaktionen der Decahalogendecaborate closo‐[B10X10]2– und hypercloso‐[B10X10]· – (X = Cl,Br). Kristallstrukturanalyse von Cs2[B10Br10] · 2 H2O

Chemical and Cyclovoltammetric Investigation of the Redoxreactions of the Decahalodecaborates closo ‐[B₁₀X₁₀]^2– and hypercloso ‐[B₁₀X₁₀]^{· –} (X = Cl, Br)¹⁾. Crystal Structure Analysis of Cs₂[B₁₀Br₁₀] · 2 H₂O The oxidation of the decachloro‐closo‐decaborates(2–) Cs₂[B₁₀Cl₁₀] or [Me₄N]₂[B₁₀Cl₁₀] with Tl(CF₃COO)₃ leads to the corresponding radical monoanion hypercloso‐[B₁₀Cl₁₀] ^{· –}, which was characterized by ESR and UV/Vis spectroscopy. [B₁₀Cl₁₀] ^{· –} does not dimerize like [B₁₀H₁₀] ^{· –} but it is reduced by acetonitrile to the dianion [B₁₀Cl₁₀]^2–. Cs₂[B₁₀Cl₁₀] reacts with stronger oxidation agents like CoF₃ (in dichloromethane) or XeF₂ (in perfluorhexane), respectively, to yield B₉Cl₉ and, in traces, B₈Cl₈. In opposite to this, the decabromoderivative Cs₂[B₁₀Br₁₀] does not show any reaction with Tl(CF₃COO)₃ in acetonitrile or with CoF₃ in CH₂Cl₂. The oxidation of the dianions [B₁₀X₁₀]^2– (X = Cl, Br) was studied by electroanalytical methods (cyclic voltammetry, chronoamperometry, chronocoulometry). Formal potentials were determined for the two steps of the reaction, which do not seem to be affected by structural rearrangements. The crystal structure of Cs₂[B₁₀Br₁₀] · 2 H₂O was analyzed by single‐crystal X‐ray diffraction. Cs₂[B₁₀Br₁₀] · 2 H₂O crystallizes monoclinic (space group I2/a, (no. 15), Z = 8, a = 1361.54(9) pm, b = 1215.89(5) pm, c = 3108.4(2) pm, α = 90°, β = 97.916(8)°, γ = 90°). The closo‐cluster B₁₀Br₁₀^2– has a bicapped square antiprismatic structure with idealized D_4d symmetry.     

Cytotoxic Activity of Capnellene‐8β, 10α‐Diol Derivatives from a Taiwanese Soft Coral Capnella sp.

The sesquiterpene capnellene‐8β, 10α‐diol ( 1 ) was isolated from non‐polar extract of the soft coral Capnella sp. Ten acylation products of capnellene‐8β, 10α‐diol were prepared: 10α‐hydroxy‐8β‐O‐benzoylcapnellene ( 2 ), 10α‐hydroxy‐8β‐O‐p‐toluoylcapnellene ( 3 ), 10α‐hydroxy‐8β‐O‐4‐chlorobenzoyl‐capnellene ( 4 ), 10α‐hydroxy‐8β‐O‐2‐furoylcapnellene ( 5 ), 10α‐hydroxy‐8β‐O‐2‐thiophenoylcapnellene ( 6 ), 10α‐hydroxy‐8β‐O‐4‐fluorobenzoylcapnellene ( 7 ), 10α‐hydroxy‐8β‐O‐4‐propylbenzoylcapnellene ( 8 ), 10α‐hydroxy‐8β‐O‐cinnamoylcapnellene ( 9 ), 10α‐hydroxy‐8β‐O‐4‐nitrobenzoylcapnellene ( 10 ), and 10α‐hydroxy‐8β‐O‐4‐anisoylcapnellene ( 11 ). The structures of capnellene‐8β, 10α‐diol as well as its derivatives were established through standard spectroscopic analysis. The in vitro cytotoxic activities of the eleven compounds were evaluated against Hela, KB, Daoy, and WiDr human tumor cell lines.     

Rate constants for the gas‐phase reactions of Cl atoms with a series of ethers

The laser photolysis–resonance fluorescence technique has been used to determine the absolute rate coefficient for the Cl atom reaction with a series of ethers, at room temperature (298 ± 2) K and in the pressure range 15–60 Torr. The rate coefficients obtained (in units of cm³ molecule⁻¹ s⁻¹) are dimethyl ether (1.3 ± 0.2) × 10⁻¹⁰, diethyl ether (2.5 ± 0.3) × 10⁻¹⁰, di‐n‐propyl ether (3.6 ± 0.4) × 10⁻¹⁰, di‐n‐butyl ether (4.5 ± 0.5) × 10⁻¹⁰, di‐isopropyl ether (1.6 ± 0.2) × 10⁻¹⁰, methyl tert‐butyl ether (1.4 ± 0.2) × 10⁻¹⁰, and ethyl tert‐butyl ether (1.5 ± 0.2) × 10⁻¹⁰. The results are discussed in terms of structure–reactivity relationship. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 105–110, 2000