共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
3.
4.
N_2在Co掺杂Ru(001)表面吸附的DFT研究 总被引:3,自引:3,他引:0
张福兰 《原子与分子物理学报》2010,27(4):769-774
采用密度泛函理论与周期性平板模型相结合的方法,对N_2在Ru(001)表面top、fcc、hcp、bridge四个吸附位和Ru-Co(001)表面Ru-top、Co-top、Ru(Ru)Ru-bridge、Co(Co)Co-bridge、Ru(Co)Co-bridge、Ru(Ru)Co-bridge、Ru_2Co-hcp、RuCo_2-hcp、Ru_2Co-fcc、RuCo_2-fcc十个吸附位的14种吸附模型进行了构型优化、能量计算,得到了N_2较有利的吸附位;并对清洁表面进行能带分析,对最佳吸附位进行总态密度分析.结果表明:掺杂Co后,Ru催化剂的能带变宽,催化活性增强;N_2在Ru(001)表面的最稳定吸附位top的吸附能是-88.94 kJ·mol~(-1),在Ru-Co(001)表面的最稳定吸附位Ru-top的吸附能是-95.71 kJ·mol~(-1),而且N_2与金属表面成键,属于化学吸附. 相似文献
5.
6.
在水溶液中,Bi(Ⅲ)与溴化四丁基铵和KI形成不溶于水的三元缔合物BiI-4·TBAB+,此三元缔合物沉淀浮于盐水相上层形成界面清晰的液-固两相。当溶液中溴化四丁基铵和KI的浓度分别为5.0×10-4mol/L和3.0×10-3mol/L,pH=3时,Bi(Ⅲ)可与Zr(Ⅳ)、Ce(Ⅲ)、U(Ⅵ)和Mg(Ⅱ)定量分离,Bi(Ⅲ)的浮选率达到100%。对合成水样中Bi(Ⅲ)的分离和测定,效果良好。该方法具有选择性高,操作简便和不污染环境等特点,在微量铋的分离和富集分析中有一定的实用价值。 相似文献
7.
分光光度法研究钯(Ⅱ)的三元离子缔合物与锑(Ⅲ)、锆(Ⅳ)和铈(Ⅲ)浮选分离的条件。在水溶液中,钯(Ⅱ)与溴化钾和四丁基溴化铵形成不溶于水的三元离子缔合物,此三元离子缔合物浮于盐水相上层形成界面清晰的液-固两相。当溶液中溴化钾和四丁基溴化铵的浓度分别为1.5×10-2mol·L-1和2.0×10-3mol·L-1时,钯(Ⅱ)被定量浮选,实现了钯(Ⅱ)与锑(Ⅲ)、锆(Ⅳ)、和铈(Ⅲ)离子的定量分离,对合成水样中的钯(Ⅱ)进行定量浮选分离测定,结果满意。 相似文献
8.
研究了以碘化钾为络合剂,正丙醇-水体系析相萃取分离和富集铋的行为及与一些金属离子分离的条件.试验结果表明,氯化钠能使正丙醇的水溶液分成两相,在分相过程中,Bi(Ⅲ)与碘化钾生成的BiI4-与质子化正丙醇(C3H7OH+)形成的缔合物[BiI4-][C3H7OH2+]能被正丙醇相完全萃取.当正丙醇、碘化钾和氯化钠的浓度分别为30%(V/V)、6.0×10-3mol·L-1、0.20g·mL-1,pH为2时,Bi(Ⅲ)的萃取率达到99.2%以上,V(Ⅴ),W(Ⅵ)和U(Ⅵ)基本不被萃取,实现了Bi(Ⅲ)与上述金属离子的分离,对合成水样中Bi(Ⅲ)进行分离和测定,结果令人满意. 相似文献
9.
10.
在水溶液中,Sb(Ⅲ)与四丁基溴化铵和碘化钾形成不溶于水的三元缔合物[SbI4][TBAB],此三元缔合物沉淀浮于盐水相上层形成界面清晰的液-固两相。当四丁基溴化铵和碘化钾的浓度分别为4.0×10-4mol/L和6.0×10-3mol/L时,在pH1.6的克拉克-鲁布斯缓冲溶液中,Sb()的浮选率达到100%。而Ce(Ⅲ)、Zr(Ⅳ)和U(Ⅵ)离子在该体系中不被浮选,实现了Sb(Ⅲ)与这些金属离子的定量分离。对合成水样中Sb(Ⅲ)的分离和测定,结果满意。该方法具有简便、快速等特点,在微量锑的分离和富集分析中有一定的实用价值。 相似文献
11.
ICP-AES法测定金属硅中的Al、B、Ba、Ca、Cr、Cu、 Fe、Mg、Mn、Ni、Sr、Ti、V和Zn杂质元素 总被引:13,自引:0,他引:13
本文提供了一种测定金属硅中B,Fe,Al,Ca,Mn等14个杂质元素的ICP-AES方法,在样品处理过程中,加入适量体积的甘露醇能够抑制B的挥发。用本方法测定了一个国家地球化学标准样(GSR-4),结果令人满意。 相似文献
12.
发射光谱法测定高纯银中微量金、铂、钯、铑、铱、锑、铅、铋、铁、铜、镍、铬、铝和锌 总被引:1,自引:0,他引:1
本文研究了贵金属标准溶液除氯离子的有关问题,解决了高纯硝酸银中贵金属等杂质元素的标样配制,以硝酸银直接压样于普通电极中直流电弧激发,可测定99.0~99.99%的高纯银,该方法简便、快速、准确。 相似文献
13.
14.
纯硒中杂质元素的ICP-AES测定 总被引:1,自引:0,他引:1
电感耦合等离子体-原子发射光谱同时测定纯硒中的碲、铅、铋、锑、铜、铁、镍、铝、锡、砷和硼12种元素的含量,优化出各元素的分析波长和分析条件;用基体匹配补偿基体效应,方法简单,快速可靠,样品回收率为94%-107%. 相似文献
15.
The lowest absorption band of the tetraphenyl compounds resembles that of the lowest absorption band of benzene with the following difference. In benzene the electronic origin is strictly forbidden, and all intensity is associated with a symmetric progression built on one mode of asymmetric vibration. In the tetraphenyl compounds the intensity associated with the asymmetric vibration is relatively unaffected; however, there is increasing intensity associated with the electronic origin and a symmetric progression built on it along the series . For the cations it is the electronic origin and the progression built on it that are the primary source of intensity. This effect is attributed to an inductive perturbation. A similar effect is observed in the fluorescence spectrum. In phosphorescence, the relative enhancement of the electronic origin and the progression built on it is far less marked. The phosphorescence emission of φ4Pb and φ4Sb+ are red shifted from the others by ~0.5 eV, an effect attributed to formation of a triplet excimer. Increasing spin-orbit coupling in the triplet due to a heavy atom effect can be seen in the decreasing phosphorescence lifetime (range 4 sec to 4 msec) and decreasing ratio of (fluorescence to phosphorescence quantum yields) in the order In all cases nonexponential decay of phosphorescence is observed. 相似文献
16.
17.
18.
Russian Physics Journal - On the basis of the charge neutrality concept, the analysis is fulfilled of the experimental data on the electron properties of the defective semiconductors after the... 相似文献
19.
20.
Hugo O. Mosca 《Surface science》2007,601(15):3224-3232
The surface energy for different surface orientations of the solid solutions as a function of concentration formed by Ti, V, Cr, Zr, Nb, Mo, Hf, Ta, and W is computed and analyzed using the BFS method for alloys. Similarities and differences among the different binary alloys are examined in terms of strain and chemical effects. 相似文献